G925a , oj7, 5.1.1 - AT&T Samsung Galaxy S6 Edge

I really need help. I bought this phone unlocked online from fingerhut on Thursday. I put my boost mobile sim card in it and it's not recognising it. I want to upgrade the rom to lollipop anyway but I don't like having to worry about knox. After some research I find out this phone has nothing but att firmware, csc, etc.
I guess what I need is a good stock rom that won't trip knox for the oj 7 basebuild and I if my boost mobile sim card will be recognized then.
Thanks ahead of time

Related

[Q] Rooting N900A to Lollipop while using T-mobile.

Ugh, I am having so many issues with this at the moment. One of those things being that I am using T-mobile as my carrier. I'm stuck on 4.4 at the moment, and need to update it. But, will that relock the phone? How do I re-unlock it if that happens? I've already read that I can't flash the phone to T-mobile ROM, but are there any custom ROMs that you would recommend [I do actually use the S-pen, not sure if any have been updated to where that can still be used.] Lastly, is there any way to get mobile hotspot and tethering to work now that I am using tmobile?
Spikemare said:
Ugh, I am having so many issues with this at the moment. One of those things being that I am using T-mobile as my carrier. I'm stuck on 4.4 at the moment, and need to update it. But, will that relock the phone? How do I re-unlock it if that happens? I've already read that I can't flash the phone to T-mobile ROM, but are there any custom ROMs that you would recommend [I do actually use the S-pen, not sure if any have been updated to where that can still be used.] Lastly, is there any way to get mobile hotspot and tethering to work now that I am using tmobile?
Click to expand...
Click to collapse
I never tried this Rom.
T-Mobile Alliance Lollipop Rom on ATT Note 3
http://forum.xda-developers.com/note-3-att/general/t-mobile-alliance-rom-att-note-3-t3065127 I don't think you would have to worry about any of this as you are using T-Mobile " After the phone came up, I went to settings..general..applications...running .... and found every Tmobile app and cleared cache and disabled them. The real important one here is the Visual Voicemail. Otherwise it will keep on trying to contact Tmobile and then you will get text messages saying there is an error. Thanks @sapps
Wifi Calling is throwing a sim card error (as you would expect). Only problem is it is shown in status bar and lockscreen. I'm sure there is a way to hide it or disable it. I just haven't had a chance to figure it out."
Rooted i747 said:
I never tried this Rom.
T-Mobile Alliance Lollipop Rom on ATT Note 3
http://forum.xda-developers.com/note-3-att/general/t-mobile-alliance-rom-att-note-3-t3065127 I don't think you would have to worry about any of this as you are using T-Mobile " After the phone came up, I went to settings..general..applications...running .... and found every Tmobile app and cleared cache and disabled them. The real important one here is the Visual Voicemail. Otherwise it will keep on trying to contact Tmobile and then you will get text messages saying there is an error. Thanks @sapps
Wifi Calling is throwing a sim card error (as you would expect). Only problem is it is shown in status bar and lockscreen. I'm sure there is a way to hide it or disable it. I just haven't had a chance to figure it out."
Click to expand...
Click to collapse
But it's the N900A, so it's the AT&T version. Won't that brick the phone if I put the tmobile ROM on it? That's what I've read in other threads on here anyway. [Honestly I shouldn't write when I'm tired, or I would have explained this better.]. Basically, I bought an unlocked AT&T phone. A Note 3 to be exact. It's stuck on 4.4 but can upgrade to lolipop. Nothing I try will let me upgrade the normal way. I'm not sure how to upgrade it without relocking the SIM card somehow. Or is the simcard already semi-locked and that's why it's giving me the error? I also can't even find a AT&T specific rooting guide for this phone. I saw every other carrier except AT&T, does that even make a difference? And are there any ROMs that can return S-pen programs after I install them, or should I just stop at rooting if I want that? If so, I just really want to upgrade to lollipop and root the phone. I would like my mobile hotspot and wifi calling to work, but I suppose I can make do with hangouts.
Spikemare said:
But it's the N900A, so it's the AT&T version. Won't that brick the phone if I put the tmobile ROM on it? That's what I've read in other threads on here anyway. [Honestly I shouldn't write when I'm tired, or I would have explained this better.]. Basically, I bought an unlocked AT&T phone. A Note 3 to be exact. It's stuck on 4.4 but can upgrade to lolipop. Nothing I try will let me upgrade the normal way. I'm not sure how to upgrade it without relocking the SIM card somehow. Or is the simcard already semi-locked and that's why it's giving me the error? I also can't even find a AT&T specific rooting guide for this phone. I saw every other carrier except AT&T, does that even make a difference? And are there any ROMs that can return S-pen programs after I install them, or should I just stop at rooting if I want that? If so, I just really want to upgrade to lollipop and root the phone. I would like my mobile hotspot and wifi calling to work, but I suppose I can make do with hangouts.
Click to expand...
Click to collapse
It won't brick you phone. It's a T-Mobile Rom that's been ported for AT&T Note 3. After you flash the Rom, you have to Odin the N900A_OC1_ALL_Other_Stock_Partitions.tar.md5 using Odin's PDA slot. As far as rooting what you have now, just use Towel root https://towelroot.com/ (install on phone like any other app) and click "make it rain". Install Supersu, busybox and Safestrap. OR use Kingo Root http://www.kingoapp.com/ (Kingo Root will install supersu for you). The reason it won't upgrade to Lollipop is you have a T-Mobile sim card in it. It needs a AT&T sim card (I have AT&T and can't upgrade mine unless the sim card is in the phone). If you just want a rooted Lollipop Rom, but it's AT&T http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2 You know since you're on T-Mobile you have to go into settings>more networks>mobile networks>access point names and change it to T-Mobile's APN. I would just root it and put the T-Mobile Alliance Lollipop Rom on ATT Note 3 on it. I gave it a try yesterday and it does have T-Mobile apps on it, just not for me. Just remember to change the APN to T-Mobile's ( just write down the one you using now).

Need help going from PA5 to PH2

Hello everyone. While I'm not new to visiting this website, I am new to posting here, so forgive me if I make a mistake.
My S5 doesn't have an active at&t Sim card, and before you say to use Odin to downgrade to PA2, or to go to Best Buy/ Samsung Experience or whatever it's called, the USB port on my phone is broken (currently I charge it wirelessly). My S5 is on PA5, and I would like to update it to the latest version of Marshmallow (PH2 I believe).
Can anyone tell me where I could get the files to do so via the recovery menu? Or even better, can someone provide them? I'd really appreciate it.
If not, borrowing a Sim card is still an option, but it's gonna be a long while before I can do so.
As of now you must downgrade to PA2 first. For now this is the only way.
Your best bet is to find someone with ATT sim card and use it to OTA

Desperately Need Help - Samsung SM-N960F/DS + T-mobile PUK and other issues.....

Hi. I am a complete noob when it comes to rooting Android.
**************************UPDATE************************************************
THIS ISSUE HAS BEEN SOLVED. PLEASE SCROLL TO POST #89 ON PAGE 9 TO SEE THE SOLUTION.
https://forum.xda-developers.com/showpost.php?p=77950935&postcount=89
***************************************************************************************************
I bought an *unlocked* Samsung Note 9 N960F/DS (Exynos 9810) international phone from a seller on ebay brand new and sealed. Received the phone yesterday (10/19/2018) and popped my working existing sim card from my iphone 6 with T-mobile into the new phone and it *worked*.........except no wifi calling.
Since my house has terrible reception I really do need wifi calling in order to receive calls (I use Skype for outbound). I decided to root and install Detonator (tekhd) even though I've never done this before. Somewhere along the line I messed up and installed the latest LUX ROM because I misred Tekhd's guide on Detonator (my fault).
Here's where I stand now: I found a stock ROM for this model (N960F/DS) and reinstalled it using Odin3 v3.13.1.
After a successful flash when I insert my working T-mobile sim I get "SIM network PIN blocked. Enter SIM network PUK."
Here the Service Provider SW shows XEU/XEU,XEU/MYM
I get the *same* message when I insert a spare T-mobile sim I happened to have that was confirmed as available with T-mobile customer service. If I take the working sim out and put it back into the other phone it works without a problem. I think that rules out the sim cards having issues.
Earlier when I had the phone rooted and Detonator installed (and working), I got a different message when I inserted the SIM:
Network Lock: This device can be remotely unlocked if eligible.
Please use the "Device Unlock" application to unlock the device.
Make sure the device has an internet connectivity to use the "Device Unlock application".​
Here the Service Provider SW showed TMB/TMB/MYM.
I tried looking for a T-mobile Unlock App apk to download but could not find a recent one. I would get a "Device not supported" error. It seems T-mobile has taken it off the Playstore.
Now, I can't install a stock USA ROM from T-mobile because those ROMS are only for the Snapdragon versions and I have the Exynos chip. I was given two unlock codes over the phone with T-mobile customer service to try and unlock the Pin lock but they both did not work.
Do you think an unlock service will be able to provide me with a valid "Sim Network PUK" code? I'm happy to pay for the service if I can just get the damn phone working. I've spent almost $770 on this phone and in hindsight should just have gotten the T-mobile branded phone for $100 more. I'm really at a loss as to what I can do to rectify this situation.
Also in hindsight I should have done more research before purchasing the phone and also should have backed up my partition in TWRP........You live and you learn.
The irony here is that I had an unlocked phone.....and now it has somehow gotten locked.........by the carrier whose SIM card is working perfectly fine......in a different phone. The device was paid in full btw.
Any help is greatly appreciated. Thank you in advance.
orsonwells456 said:
Hi. I am a complete noob when it comes to rooting Android.
I bought an *unlocked* Samsung Note 9 N960F/DS (Exynos 9810) international phone from a seller on ebay brand new and sealed. Received the phone yesterday (10/19/2018) and popped my working existing sim card from my iphone 6 with T-mobile into the new phone and it *worked*.........except no wifi calling.
Since my house has terrible reception I really do need wifi calling in order to receive calls (I use Skype for outbound). I decided to root and install Detonator (tekhd) even though I've never done this before. Somewhere along the line I messed up and installed the latest LUX ROM because I misred Tekhd's guide on Detonator (my fault).
Here's where I stand now: I found a stock ROM for this model (N960F/DS) and reinstalled it using Odin3 v3.13.1.
After a successful flash when I insert my working T-mobile sim I get "SIM network PIN blocked. Enter SIM network PUK."
Here the Service Provider SW shows XEU/XEU,XEU/MYM
I get the *same* message when I insert a spare T-mobile sim I happened to have that was confirmed as available with T-mobile customer service. If I take the working sim out and put it back into the other phone it works without a problem. I think that rules out the sim cards having issues.
Earlier when I had the phone rooted and Detonator installed (and working), I got a different message when I inserted the SIM:
Network Lock: This device can be remotely unlocked if eligible.
Please use the "Device Unlock" application to unlock the device.
Make sure the device has an internet connectivity to use the "Device Unlock application".
Here the Service Provider SW showed TMB/TMB/MYM.
I tried looking for a T-mobile Unlock App apk to download but could not find a recent one. I would get a "Device not supported" error. It seems T-mobile has taken it off the Playstore.
Now, I can't install a stock USA ROM from T-mobile because those ROMS are only for the Snapdragon versions and I have the Exynos chip. I was given two unlock codes over the phone with T-mobile customer service to try and unlock the Pin lock but they both did not work.
Do you think an unlock service will be able to provide me with a valid "Sim Network PUK" code? I'm happy to pay for the service if I can just get the damn phone working. I've spent almost $770 on this phone and in hindsight should just have gotten the T-mobile branded phone for $100 more. I'm really at a loss as to what I can do to rectify this situation.
Also in hindsight I should have done more research before purchasing the phone and also should have backed up my partition in TWRP........You live and you learn.
The irony here is that I had an unlocked phone.....and now it has somehow gotten locked.........by the carrier whose SIM card is working perfectly fine......in a different phone. The device was paid in full btw.
Any help is greatly appreciated. Thank you in advance.
Click to expand...
Click to collapse
this is a first. I always though once the region lock was lifted it couldn't be relocked( to me it seems to be a region lock issue, which if it is you need to make a 5 min call on region soil... good luck)
anyways check on your box there is a sticker with model and serial . find what carrier or region its from and grab that firmware and flash it. might want to factory wipe everything (including cache) in the recovery before booting it up indownlaod mode to do Odin flash.
also remove sim before wiping/ flashing, let it boot and do the initial setup then insert sim.
bober10113 said:
this is a first. I always though once the region lock was lifted it couldn't be relocked( to me it seems to be a region lock issue, which if it is you need to make a 5 min call on region soil... good luck)
anyways check on your box there is a sticker with model and serial . find what carrier or region its from and grab that firmware and flash it. might want to factory wipe everything (including cache) in the recovery before booting it up indownlaod mode to do Odin flash.
also remove sim before wiping/ flashing, let it boot and do the initial setup then insert sim.
Click to expand...
Click to collapse
I did wipe and reinstall the stock rom with the sim removed. The strange thing is..........I get the same message if I insert an old, blank, unused t-mobile sim into the device. Plus the working sim works fine in my old phone. So how could it be that the sim is locked?
There is nothing on the box that says anything about a carrier. This was advertised and sold as a factory unlocked phone which by all indications it does seem to be. The only thing on the box that says anything about country is that it was manufactured in vietnam.
orsonwells456 said:
I did wipe and reinstall the stock rom with the sim removed. The strange thing is..........I get the same message if I insert an old, blank, unused t-mobile sim into the device. Plus the working sim works fine in my old phone. So how could it be that the sim is locked?
There is nothing on the box that says anything about a carrier. This was advertised and sold as a factory unlocked phone which by all indications it does seem to be. The only thing on the box that says anything about country is that it was manufactured in vietnam.
Click to expand...
Click to collapse
no sticker with device model or anything? not even in the back of the phone when it was new? a white sticker
bober10113 said:
no sticker with device model or anything? not even in the back of the phone when it was new? a white sticker
Click to expand...
Click to collapse
Yes there are stickers. But it is not associated with a carrier, specific region, or country. I just see IMEI info on the sticker on the back of the phone and S/N.
orsonwells456 said:
Yes there are stickers. But it is not associated with a carrier, specific region, or country. I just see IMEI info on the sticker on the back of the phone and S/N.
Click to expand...
Click to collapse
nothing like
SM-N960FOYAU1MYM or something?
bober10113 said:
nothing like
SM-N960FOYAMYM or something?
Click to expand...
Click to collapse
Ah ok. SM-N960FZBDMYM
bober10113 said:
nothing like
SM-N960FOYAU1MYM or something?
Click to expand...
Click to collapse
btw I think detonator zip backup efs partition. did your issues arise before it after flashing it? if after try to find the backup and refresh it
bober10113 said:
btw I think detonator zip backup efs partition. did your issues arise before it after flashing it? if after try to find the backup and refresh it
Click to expand...
Click to collapse
I was a dumbass and did not backup. I had zero issues other than no wifi-calling before trying to root and flash detonator...... Thank you for your help.
I went to a site with all "official" downloads and I don't see anything for ZBDMYM........
orsonwells456 said:
I was a dumbass and did not backup. I had zero issues other than no wifi-calling before trying to root and flash detonator...... Thank you for your help.
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-N960F/region/MYM/
did you flash one of these?
these should be the original firmware U1 and the lates U2 which if you flash wint be able to downgrade bootloader but shouldn't be causing rhe sim lock issue.
flash U1 first and see if it fixes your issue. then try the October U2 just for fun
you can also download it using samfirm tool
enter 960F and MYM in settings it should also be a faster download then the web links
bober10113 said:
https://samsung-firmware.org/model/SM-N960F/region/MYM/
did you flash one of these?
these should be the original firmware U1 and the lates U2 which if you flash wint be able to downgrade bootloader but shouldn't be causing rhe sim lock issue.
flash U1 first and see if it fixes your issue. then try the October U2 just for fun
Click to expand...
Click to collapse
My baseband version currently shows N960FXXU2ARH7 and Service Provider SW Ver. shows XEU/XEU, XEU/MYM. I will try loading U1 first and see what happens.
orsonwells456 said:
My baseband version currently shows N960FXXU2ARH7 and Service Provider SW Ver. shows XEU/XEU, XEU/MYM. I will try loading U1 first and see what happens.
Click to expand...
Click to collapse
ok so it's too late for U1 . ure phone is already on U2 latest bootloader. so flash the October build
but be sure to wipe all with no sim before flashing
and in Odin fill in all slots and for csc use CSC but not HOME csc file.
good luck
bober10113 said:
ok so it's too late for U1 . ure phone is already on U2 latest bootloader. so flash the October build
but be sure to wipe all with no sim before flashing
Click to expand...
Click to collapse
Should I take out sim, use TWRP to wipe, then go into download mode, Odin3=> flash rom? Thanks.
orsonwells456 said:
Should I take out sim, use TWRP to wipe, then go into download mode, Odin3=> flash rom? Thanks.
Click to expand...
Click to collapse
yeah might as well use tarp. and erase all. but before, did you sift through internal s or ext s for an efs backup that detonator might have made automatically?
check for a folder called .backup and or for a file like:
efs_backup.img.gz
efs_backup.img
or anything similar
bober10113 said:
yeah might as well use tarp. and erase all. but before, did you sift through internal s or ext s for an efs backup that detonator might have made automatically?
Click to expand...
Click to collapse
No, but I did download Dr. Ketan's tool to make an efs backup. But that was way later in the process....so it wasn't the original efs directory......It was after I flashed my current "stock" rom. I'm going to try and find another site to download since that one will take 2 days on slow speed......
Btw what does the ZBD mean? MYM I figured is Myanmar......
orsonwells456 said:
No, but I did download Dr. Ketan's tool to make an efs backup. But that was way later in the process....so it wasn't the original efs directory......It was after I flashed my current "stock" rom. I'm going to try and find another site to download since that one will take 2 days on slow speed......
Btw what does the ZBD mean? MYM I figured is Myanmar......
Click to expand...
Click to collapse
probably a date code of some sort. Samsung mashes a bunch if letters to come up with country,date code. just Google it.
but try samfirm 3.6 tool to dl
https://1drv.ms/f/s!AhXVLDDj8g3AgdJZClzJmsN17YL2CQ
I am using Samfirm and found this;
Model: N960F
Region: MYM
File: N960FXXU2ARJ1/N960FOXM2ARJ1/N960FXXU2ARJ1/N960FXXU2ARJ1
Verions: N960F_1_20181001162540_w0h1lv73k8_fac.zip.enc4
If Install this ROM, does this mean my phone will be region locked to MYM again? I'm definitely confused on this......
orsonwells456 said:
I am using Samfirm and found this;
Model: N960F
Region: MYM
File: N960FXXU2ARJ1/N960FOXM2ARJ1/N960FXXU2ARJ1/N960FXXU2ARJ1
Verions: N960F_1_20181001162540_w0h1lv73k8_fac.zip.enc4
Click to expand...
Click to collapse
yeah looks good. its October 1st build
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
orsonwells456 said:
If Install this ROM, does this mean my phone will be region locked to MYM again? I'm definitely confused on this......
Click to expand...
Click to collapse
well ure screwed either way. the goal is to restore everything back to stock and see if you can get a line working
btw was there a seal on the box that you had to break in order to open the box when you first got it?

960f/ds exynos can I flash any usa firmware?

Hi people I've recently purchased an unlocked international 960f/ds which happens to be from Singapore and using it here in the US. Now I got few issues with it. When i type in numbers, it does not show with hyphens aka dash. I got like,for example, 2032038080 instead of 203-203-8080 and it doesnt show what town the calling number is from. It just shows what state that number is from, which is really annoying lol. Also, there is no built-in voicemail in the phone app. Because of that, i had to install a carrier voicemail app from playstore.
Does it have anything to do with the current firmware? If so, can i fix or flash anything to get it working? if u are aware of these issues or have already solved plz let me know.
Nope u can't mate.
youngtg said:
Hi people I've recently purchased an unlocked international 960f/ds which happens to be from Singapore and using it here in the US. Now I got few issues with it. When i type in numbers, it does not show with hyphens aka dash. I got like,for example, 2032038080 instead of 203-203-8080 and it doesnt show what town the calling number is from. It just shows what state that number is from, which is really annoying lol. Also, there is no built-in voicemail in the phone app. Because of that, i had to install a carrier voicemail app from playstore.
Does it have anything to do with the current firmware? If so, can i fix or flash anything to get it working? if u are aware of these issues or have already solved plz let me know.
Click to expand...
Click to collapse
no u cannot flash US firmware on 960f/ds. Because the US variant is powered by snapdragon and the model which u have is powered by exynos. flashing US firmware on ur device will fry ur motherboard.
just root ur phone and change ur CSC.
read this for changing CSC.
https://forum.xda-developers.com/ga...0fd-dual-sim-csc-change-oxm-t3841000 :cowboy:
@tycoon78[stoner]
In the same boat I have a n960-F using it in Canada, phone works amazing but I would like to get WifiCalling VoLTE etc. From what I've read I need to flash a local CSC
I use this Dual Sim device for work, and can't have Knox tripped, will flashing a new CSC trip knox?
A couple other questions:
Will this device ever receive OTA updates?
Am I better off selling my n960-F and purchasing a n9600 (dual sim - snapdragon)
Will I be stuck on Oreo with this phone?
Thanks in advance for your help!
hph198 said:
@tycoon78[stoner]
In the same boat I have a n960-F using it in Canada, phone works amazing but I would like to get WifiCalling VoLTE etc. From what I've read I need to flash a local CSC
I use this Dual Sim device for work, and can't have Knox tripped, will flashing a new CSC trip knox?
A couple other questions:
Will this device ever receive OTA updates?
Am I better off selling my n960-F and purchasing a n9600 (dual sim - snapdragon)
Will I be stuck on Oreo with this phone?
Thanks in advance for your help!
Click to expand...
Click to collapse
I can see you've asked this a few times before, it might be worth creating a new thread and asking your question, instead of bumping old threads up.
I can't answer all of your questions but I can answer;
will flashing a new CSC trip knox? No - Unless you go to Dev options and enable OWM unlocking, you can't trip Knox.
Will this device ever receive OTA updates? Yes - as the device is still effectively stock, running stock software, you should get updates depending on what CSC you have.
Will I be stuck on Oreo with this phone? No - The SM-N960F has received Pie in multiple locations now and you can just flash it with Odin.
Will you get VoLTE ect working in Canada? According to the brief research I've done, no, you need a SM-N960W for that. I checked this and this thread.

Samsung SM-925A Updates and/or Custom ROM

I received a free Samsung S6 Edge from some friends. The phone had a busted battery which I fixed. The phone is still on the original 5.1.1 that the phone was released with.
When I try to do updates it says DM initialization not ready. Check network or SIM card. When I received the phone I was told it doesn't work with cell service. I checked to make sure and it definitely doesn't. There are no options for cell service in settings or the drop-down menu. This phone is missing IMEI numbers, IMEISV numbers, and baseband versions too. The only way I found out the IMEI number was it was printed on the back of the phone.
I am fairly certain the problems are software-based and not the motherboard but I don't know enough about phones to be sure. Do you guys know? I also want to remove AT&T from the phone to install a custom ROM on the device. (There is no OEM unlock in the developer options) Can I flash SM-925F firmware on the device to make it factory unlocked or will this brick the device? Will flashing the original SM-925A firmware fix the problems with the device? Please let me know if you need any more information to answer my question.
I found this: //G925A\\ Nougat 7.0.1 Latest Stock ATT Odin files G925AUCS7ERC1 | XDA Developers Forums (xda-developers.com) Should I flash this on my device? Will it fix any of the problems I had on it?
Can I flash the SM-925F firmware? Is the hardware of the factory unlocked phone and AT&T versions the same or will it brick this phone if I flash it?
Since the phone is AT&T you'll have to go through AT&T for the unlock codes before you can flash anything other than an AT&T ROM. To my knowledge there are no custom ROMS for the S6 Edge, but I could be mistaken.
skeltonh said:
Since the phone is AT&T you'll have to go through AT&T for the unlock codes before you can flash anything other than an AT&T ROM. To my knowledge there are no custom ROMS for the S6 Edge, but I could be mistaken.
Click to expand...
Click to collapse
I know this phone is old news however, I actually have the S6 and S7 edge lying around and so i got bored lol...here is my dilemma; Evidently the phone (S6 Edge G925A) had an abnormal factory reset, which is a load of BS, and now I can not get that security detail, which you know calling Samsung always ends to NO AVAIL!! I have flashed with Odin the firmware that my device is on the ERC1 firmware and still I get stuck @abnormal reset. I've searched numerous sites, different forums and still to no avail. Something told me inside that you was the man to drop a line to, any leads or info will be more than appreciated brother...Thanks for your time....
PSSS....
I got my unlock code from AT&T some time ago but the code is 16 digits long and code only takes 8 digits, and of course to hear AT&T tell it, " I simply must not putting the code in correctly"...lmao

Categories

Resources