loudspeaker is not loud enough for me is there a mod to increase it?
kromosto said:
loudspeaker is not loud enough for me is there a mod to increase it?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.TEST.android.lvh
Don't know if that works but you can try it.
Tried Volume+ , Equalizer and "Audio Boost SGS2". Well last one (in bold) is the best in my opinion.
I tried it, it only works for headphones, If you are playing videos , MX Player and Dice Player, can boost the audio.
I use Power Amp for music and it`s quite loud.
John.
Army92 said:
https://play.google.com/store/apps/details?id=com.TEST.android.lvh
Don't know if that works but you can try it.
Click to expand...
Click to collapse
thank you i will try your suggestions and will write the result
You can download DSP manager and for the speaker option enable the equaliser and decrease the lows and increase the mid and high frequencies. In theory that should work!
I have a S5830M with BeatsAudio and S9HD Headset. Last week while I was listening to music and using the bluetooth headset I hear a beeping noise in the bluetooth, suddenly the volume went down like hell, couldnt manage to fix it so I turn em off. Now that I try to use em again I cant manage to have the same volume as before I put volume on 100 but in the headset it hears so low. And again the beeping continous to appear now and then.
I tried flashing beatsAudio again, replacing music player, adding equializers, but no success. So im posting it here to see if someone can help me
Shankay said:
I have a S5830M with BeatsAudio and S9HD Headset. Last week while I was listening to music and using the bluetooth headset I hear a beeping noise in the bluetooth, suddenly the volume went down like hell, couldnt manage to fix it so I turn em off. Now that I try to use em again I cant manage to have the same volume as before I put volume on 100 but in the headset it hears so low. And again the beeping continous to appear now and then.
I tried flashing beatsAudio again, replacing music player, adding equializers, but no success. So im posting it here to see if someone can help me
Click to expand...
Click to collapse
Try ALSA.
domnic79 said:
Try ALSA.
Click to expand...
Click to collapse
Tried, BeatsAudio +ALSA +Audio FX but still the same....I read something about mixget do you think that could work?
Shankay said:
Tried, BeatsAudio +ALSA +Audio FX but still the same....I read something about mixget do you think that could work?
Click to expand...
Click to collapse
Never tried it, so i dont kno if it wil work or not.
Sent from my GT-S5830i using xda premium
Hi is there a way to get sound louder ? by installing or modifying something ? because i miss much notification as my MI3 sound is weak ..
does installing Viper4android will do the job ?
For me viper4 does not change anything.
tlf55 said:
Hi is there a way to get sound louder ? by installing or modifying something ? because i miss much notification as my MI3 sound is weak ..
does installing Viper4android will do the job ?
Click to expand...
Click to collapse
if you are using viper4android, you can set max gain in playback gain control
visualfighter said:
if you are using viper4android, you can set max gain in playback gain control
Click to expand...
Click to collapse
Actually i'm not using it but should i use it to gain louder sound ? or will it be the same and should i look for something else ?
tlf55 said:
Actually i'm not using it but should i use it to gain louder sound ? or will it be the same and should i look for something else ?
Click to expand...
Click to collapse
You can use it. It makes louder sound. Do carefully so it doesn't hurt your ears. Try 2x gain at first
visualfighter said:
You can use it. It makes louder sound. Do carefully so it doesn't hurt your ears. Try 2x gain at first
Click to expand...
Click to collapse
I was not talking about headphone sound but speakers.. i'm actually happy with the sound of headphone ! Just speakers (when using no headphone) sometime i don't hear the notification sound or the ringtone .. cause the speaker sound is weak.. That's why i was thinking about something that can make it louder .. and maybe Viper4android will do the job ?
tlf55 said:
I was not talking about headphone sound but speakers.. i'm actually happy with the sound of headphone ! Just speakers (when using no headphone) sometime i don't hear the notification sound or the ringtone .. cause the speaker sound is weak.. That's why i was thinking about something that can make it louder .. and maybe Viper4android will do the job ?
Click to expand...
Click to collapse
This make me have a serious question about what's wrong with mi3 quality control, bro. For me, the ringtone and notif sound is little too loud, even when I set the volume level just 3 stops from zero.But now you are saying that it's weak .
Are you sure it's all about volume? or maybe something else? Like bugs that make no notif or ringtone sometimes?
About v4a, I just tried it, and yes, I can confirm that It can make ringtone louder, by activate 'Speaker optimization' and 'extra loud ( max gain) option' :good:
So far I've tried a ported Sony Walkman apk with various old school sound mods (xLoud & Clearaudio+, Beats), then Apollo with HTK audio engine, then ViPER4Android. I can't tell if any of them worked, which usually I can tell. I think it's because the sound from the PURE's speakers is already pretty loud, and much better sounding then my original Moto X's? I used the selinux app for ViPER4Android, and HTK audio engine apparently doesn't require the selinux mode change. I'm gonna play around later with my Bluetooth headphones to see if I can notice it better. I think the speakers/drivers are pretty damn good, can't wait to see how much better they can get, being an audio enthusiast. Thoughts, input, ideas?:silly:
Edit: I plan on adding the "known" working music mods/apk's/etc.....
mixer_paths.xml VOLUME BOOST
XTREMEMusic
Xperia Z3 WALKMAN and MODS
ViPER4Android
HTK audio engine
SONY graphics
Tried using viper on stock and it sounded god awful. It didnt improve the sound one bit and instead made it sound super tinny to where some songs would hurt my ears. It did work on AICP though, but its still to buggy for me to use as a daily.
juanacevedo said:
Tried using viper on stock and it sounded god awful. It didnt improve the sound one bit and instead made it sound super tinny to where some songs would hurt my ears. It did work on AICP though, but its still to buggy for me to use as a daily.
Click to expand...
Click to collapse
Thanks for the input! I still can't tell a difference. I did however flash THIS and it seemed to work. I had the "color mode" set to normal instead of vibrant since I didn't think vibrant made it any better. But I flashed the Sony zip and it seems much better.....
gokart2 said:
Thanks for the input! I still can't tell a difference. I did however flash THIS and it seemed to work. I had the "color mode" set to normal instead of vibrant since I didn't think vibrant made it any better. But I flashed the Sony zip and it seems much better.....
Click to expand...
Click to collapse
Interesting, would you say the difference is very noticeable? I remember using something like this on the optimus4x and it made it look nicer but I'm not sure if it was a placebo or not haha
Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk
TGtheImmortal said:
Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
DUDE! I just have to say, thank you for linking that mod! Originally viper did not work at all for me on stock but after installing these mods, sound quality is now amazing! It's the best on any phone I've had so far.
Everyone go flash this!
juanacevedo said:
DUDE! I just have to say, thank you for linking that mod! Originally viper did not work at all for me on stock but after installing these mods, sound quality is now amazing! It's the best on any phone I've had so far.
Everyone go flash this!
Click to expand...
Click to collapse
Very welcome. Its amazing so glad it was useful to you!
Ok..... I was able to increase the volume by editing the mixer_paths.xml similar to the way it's listed on the net everywhere. Only tested the phone speakers and bluetooth, not headphones. Was kinda scared so I only increased everything by "2". That was noticeable and good enough for now.
1. Using your favorite file explore go to = system/etc/mixer_paths.xml
2. Increase the highlighted area parameters in the pic below. I increased everything by only ''2''.
GO IN SMALL STEPS. I DON"T KNOW WHICH PARAMETER IS WHAT SPEAKER..... OR WHEN IT WILL BREAK SOMETHING!!
I WILL NOT BE RESPONSIBLE FOR BLOWING YOUR SPEAKERS OR EARDRUMS!!
I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?
ioneng said:
I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?
Click to expand...
Click to collapse
I installed it like the post specified, and it sure seems like its working. I haven't adjusted the EQ though. What do u mean neon=no?
TGtheImmortal said:
Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
this is what I have for past month along with dolby atmos (v4a+atmos)
sometimes I feel like there is to much bass so I try to tweak it from time time I use bluetooth earphones (jabra rox)
ioneng said:
I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?
Click to expand...
Click to collapse
neon shows for me no however under normal mode works just fine there isn't any other solution I know for NORMAL mode to work on stock rom at least.
gokart2 said:
I installed it like the post specified, and it sure seems like its working. I haven't adjusted the EQ though. What do u mean neon=no?
Click to expand...
Click to collapse
Inside V4A, if you check driver status, it says NEON=NO instead of yes.
patt2k said:
this is what I have for past month along with dolby atmos (v4a+atmos)
sometimes I feel like there is to much bass so I try to tweak it from time time I use bluetooth earphones (jabra rox)
neon shows for me no however under normal mode works just fine there isn't any other solution I know for NORMAL mode to work on stock rom at least.
Click to expand...
Click to collapse
Do you mean that V4A works for you fine even when NEON is no? I haven't tested it extensively because I gave up once seeing the "No" hehe. I'll give it a try now and see whether V4A is really working. I do think however, that XtremeMusic Mod is working, my bluetooth buds sounds much better than before I flashed them. So even if V4A is not working, I can just wait for them to find a fix.
ioneng said:
Inside V4A, if you check driver status, it says NEON=NO instead of yes.
Do you mean that V4A works for you fine even when NEON is no? I haven't tested it extensively because I gave up once seeing the "No" hehe. I'll give it a try now and see whether V4A is really working. I do think however, that XtremeMusic Mod is working, my bluetooth buds sounds much better than before I flashed them. So even if V4A is not working, I can just wait for them to find a fix.
Click to expand...
Click to collapse
Exactly it shows neon-no and it works.
patt2k said:
Exactly it shows neon-no and it works.
Click to expand...
Click to collapse
I just noticed that when I play a song, v4a shows "processing=no" as well. My conclusion is that when we flashed "XtremeMusic Mod with Project Desire and V4A", the "XtremeMusic Mod with Project Desire" part did stick, but not the fixed V4A version. So the sound enhancement we can hear is from the first 2 mods only. I tried increasing/decreasing bass in V4A and there was no audible difference.
is anyone able to get walkman working on stock? It seems to bootloop in the presence of lucky patcher.
UPDATE: I'm able to get the standalone 9.0.2A to work, but not the 3.5 Z3 package
ioneng said:
I just noticed that when I play a song, v4a shows "processing=no" as well. My conclusion is that when we flashed "XtremeMusic Mod with Project Desire and V4A", the "XtremeMusic Mod with Project Desire" part did stick, but not the fixed V4A version. So the sound enhancement we can hear is from the first 2 mods only. I tried increasing/decreasing bass in V4A and there was no audible difference.
Click to expand...
Click to collapse
I was having the same issue but managed to get it to start working.
Steps I took:
* Uninstall V4A Drivers
* Reboot to recovery
* Re-install XtremeMusic
* WIPE CACHE/DALVIK
* Re-install V4A and drivers (mine got uninstalled in the process of flashing XM)
* Reboot
* Set SELinux to Permissive
* Play some music and open V4A to verify V4A is working (I have mine set to Compatible and Forced)
* Open XM and turn on
Hopefully this works for anyone else having issues as well. Relatively simple fix but it worked for me.
Been using this Viper, Atmos, Beats installer for the last few weeks and it's fantastic. Developer is actively developing with a new version nearly every day (at this point mostly small tweaks to increase compatibility across devices). I'm on the latest version (3.7) with no problems. Wipe dalvik and cache, flash, reboot.
http://forum.xda-developers.com/showthread.php?p=57021246
mxpe 6.0
ffejy462 said:
Been using this Viper, Atmos, Beats installer for the last few weeks and it's fantastic. Developer is actively developing with a new version nearly every day (at this point mostly small tweaks to increase compatibility across devices). I'm on the latest version (3.7) with no problems. Wipe dalvik and cache, flash, reboot.
http://forum.xda-developers.com/showthread.php?p=57021246
mxpe 6.0
Click to expand...
Click to collapse
This works pretty good IMO!:good:
gokart2 said:
Ok..... I was able to increase the volume by editing the mixer_paths.xml similar to the way it's listed on the net everywhere. Only tested the phone speakers and bluetooth, not headphones. Was kinda scared so I only increased everything by "2". That was noticeable and good enough for now.
1. Using your favorite file explore go to = system/etc/mixer_paths.xml
2. Increase the highlighted area parameters in the pic below. I increased everything by only ''2''.
GO IN SMALL STEPS. I DON"T KNOW WHICH PARAMETER IS WHAT SPEAKER..... OR WHEN IT WILL BREAK SOMETHING!!
I WILL NOT BE RESPONSIBLE FOR BLOWING YOUR SPEAKERS OR EARDRUMS!!
Click to expand...
Click to collapse
I have edited the lines that you have in your screenshot and I haven't heard an increase in my headphones nor speakers at all. Were/are there any other lines that need to be edited in the mixer_paths.xml file (such as the section beginning with '<path name="headphones">'?
Do you have any recommended values that you changed yours to in order to hear a difference? Thanks!
rob.allen78 said:
I have edited the lines that you have in your screenshot and I haven't heard an increase in my headphones nor speakers at all. Were/are there any other lines that need to be edited in the mixer_paths.xml file (such as the section beginning with '<path name="headphones">'?
Do you have any recommended values that you changed yours to in order to hear a difference? Thanks!
Click to expand...
Click to collapse
I honestly was copying a mod from a Nexus device and I think I was tricking myself into noticing a volume increase. :silly:
Sometimes when I use my headphone and switch in different songs or apps that use audio output, there will be a difference of volume between the left and right channels. I have to stop my music for about 5 seconds to recover to the normal output.
aegoyu said:
Sometimes when I use my headphone and switch in different songs or apps that use audio output, there will be a difference of volume between the left and right channels. I have to stop my music for about 5 seconds to recover to the normal output.
Click to expand...
Click to collapse
I thought i was alone who is facing this issue .
Same here, while playing games there's a lag in Bullet sounds, Thought i'm the only one.
i dont think its a bug
in the accessibility setting there is an option called
Mono Audio
turn it of and i think everything will be ok
Kellwa said:
i dont think its a bug
in the accessibility setting there is an option called
Mono Audio
turn it of and i think everything will be ok
Click to expand...
Click to collapse
It's definitely a bug which only exists in Oero builds. You shouldn't give up your right to enjoy stereo music to escape from facing this bug. :crying:
Moreover, sometimes the audio stops from reproducing through the speakers and reproduces from the earpiece... Have to reboot to fix it temporarily.
Hi. I have the same problem too.
Sent from my [device_name] using XDA-Developers Legacy app
aegoyu said:
It's definitely a bug which only exists in Oero builds. You shouldn't give up your right to enjoy stereo music to escape from facing this bug. :crying:
Click to expand...
Click to collapse
as far as i know Mono Audio mean NOT stereo but only 1 speaker
so if its ENABLED thats mean you will hear from one speaker only
but DISABLE it and your stereo should be ok
i think Oneplus put this option because they have only one speaker in the phone
and to make all the sound come from it they combined the
2 stereo channels in one using this option
Kellwa said:
as far as i know Mono Audio mean NOT stereo but only 1 speaker
so if its ENABLED thats mean you will hear from one speaker only
but DISABLE it and your stereo should be ok
i think Oneplus put this option because they have only one speaker in the phone
and to make all the sound come from it they combined the
2 stereo channels in one using this option
Click to expand...
Click to collapse
You misunderstood the bug. Mono Audio is disabled by default. This bug has nothing with the opinion.
I am facing this too , i thought either my earphones have gon e bad or jack has fried. So its a software issue i belive.
aegoyu said:
You misunderstood the bug. Mono Audio is disabled by default. This bug has nothing with the opinion.
Click to expand...
Click to collapse
sorry if i misunderstood
Hi all, do you use YouTube Vanced? Now i'm using O beta 2: i downloaded: iYTBP-v12.45.56-b01.12.00-minAPI21-arm64-v8a-alldpi-black-v2.7-vanced.apk and replace it in System/app/Youtube but fail. I see in the Appdrawer does not display the name Youtube. It's just "ani", and it will force closed when I click on it.
Pls help me if you know this bug. tks you