Hi guys !
I recently flashed my XT1092 to Cyanogenmod 14.1 Nougat ROM and I have a problem when charging my phone.
It's not a vital problem because my phone is still charging but my phone is not showing the percentage on the screen as before.
It appeared after the flash of the custom ROM.
You will find the screen in the attachements.
Anyone experienced this problem ? If you have a solution it would be nice.
Thanks to you
Hi! Try to flash a custom kernel for Cyanogenmod 14.1 from this thread!
There is a kernel to flash for CM 14.1 ? In which thread can I find it ?
Lyndis said:
There is a kernel to flash for CM 14.1 ? In which thread can I find it ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mo...lone-x-kernel-cm13-22th-fev-uber-5-2-t3320406
Thanks ! I managed to get my percentage back with this kernel ! But I have a problem, in the properties of the phone it tells "unavailable" on kernel version.
And it works but I would like to know why it didn't work, isn't the kernel supposed to be packaged with CM ROM ?
Lyndis said:
Thanks ! I managed to get my percentage back with this kernel ! But I have a problem, in the properties of the phone it tells "unavailable" on kernel version.
And it works but I would like to know why it didn't work, isn't the kernel supposed to be packaged with CM ROM ?
Click to expand...
Click to collapse
Yes this kernel special for CM14.1, Lineage OS based on CM!
Related
Hello!
I flashed a new kernel for my smoothie rom. And when i go to the wifi settings on/off button is locked on. In wifi settings there is only a text "Starting WIFI".
I think it's not working because the kernel has lowered wifi voltage.
Does anybody else have same problem?
I'll be very grateful if someone would find a fix for this problem.
:good:
Only an idea:
Did you a restart of your device (after flashing kernel)???
_Flasher_ said:
Hello!
I flashed a new kernel for my smoothie rom. And when i go to the wifi settings on/off button is locked on. In wifi settings there is only a text "Starting WIFI".
I think it's not working because the kernel has lowered wifi voltage.
Does anybody else have same problem?
I'll be very grateful if someone would find a fix for this problem.
:good:
Click to expand...
Click to collapse
Yes...
freakymod2120 said:
Only an idea:
Did you a restart of your device (after flashing kernel)???
Click to expand...
Click to collapse
Hello and sorry for lateness
I have restarted it and i have flashed other kernels too, but i have still that problem.
I flashed M.O.W ROM JB 4.1 and then kernel, it worked :laugh:
i still dont know what was the problem, but i think it was the rom.
And last but not least Thanks for helping!!
The main thing is ,that now Wifi works for you ...:good:
Thxs for the Info!
_Flasher_ said:
Hello and sorry for lateness
I have restarted it and i have flashed other kernels too, but i have still that problem.
I flashed M.O.W ROM JB 4.1 and then kernel, it worked :laugh:
i still dont know what was the problem, but i think it was the rom.
And last but not least Thanks for helping!!
Click to expand...
Click to collapse
I flashed Phenom Kernel v6.1 for 4.3, and wifi is not working anymore. Someone had the same problem there, I don't know how to change my router's channels. Any other ideas?
Ps. I would like to post to dev page, where this kernel is but I can't do that because I don't have over 10 posts in this forum. Isn't that pretty stupid?
Qtwo said:
I flashed Phenom Kernel v6.1 for 4.3, and wifi is not working anymore. Someone had the same problem there, I don't know how to change my router's channels. Any other ideas?
Ps. I would like to post to dev page, where this kernel is but I can't do that because I don't have over 10 posts in this forum. Isn't that pretty stupid?
Click to expand...
Click to collapse
what ROM you using?
I have this problem too.
I installed the M.O.W ROM 4.3 with CWM 6.0.4.
Hello guys
Recently I unlocked the phone bootloader , rooted and installed a new ROM ..
But when I get a notification sometimes , a high pitch buzz sound comes out of the speaker and at the same time I discovered that the earphone Jack doesn't work anymore
This didn't happen before I installed the new ROM so I thought I install another ROM but it occurred on the new ROM too
Thanks for your help
aliess said:
Hello guys
Recently I unlocked the phone bootloader , rooted and installed a new ROM ..
But when I get a notification sometimes , a high pitch buzz sound comes out of the speaker and at the same time I discovered that the earphone Jack doesn't work anymore
This didn't happen before I installed the new ROM so I thought I install another ROM but it occurred on the new ROM too
Thanks for your help
Click to expand...
Click to collapse
What rom did you install?
First time I installed AOKP rom with Doomloard kernel and now I am on slim kat rom
aliess said:
First time I installed AOKP rom with Doomloard kernel and now I am on slim kat rom
Click to expand...
Click to collapse
Okay, try this.
Put slimkat rom in external sd.
then put your phone in recovery>Wipe cache partition>wipe dalvik cache>wipe system>install slimkat>reboot
androidtweaker1 said:
Okay, try this.
Put slimkat rom in external sd.
then put your phone in recovery>Wipe cache partition>wipe dalvik cache>wipe system>install slimkat>reboot
Click to expand...
Click to collapse
Sorry but that didn't help , the problem still exists ,can this be a hardware problem ? Something wrong with the headphone jack? Should I flash the custom ROM to be sure ?
aliess said:
Sorry but that didn't help , the problem still exists ,can this be a hardware problem ? Something wrong with the headphone jack? Should I flash the custom ROM to be sure ?
Click to expand...
Click to collapse
Try CM11 and check whether the issue continues
It's a known issue with AOSP based roms
NeophyteGS2 said:
It's a known issue with AOSP based roms
Click to expand...
Click to collapse
I did not face that issues when i flashed cm11 or aokp
It's not a constant buzz, only briefly every so often. I'm not sure whether it's because older blobs are used or because of cm itself
NeophyteGS2 said:
It's not a constant buzz, only briefly every so often. I'm not sure whether it's because older blobs are used or because of cm itself
Click to expand...
Click to collapse
Give paranoid android a try
androidtweaker1 said:
Give paranoid android a try
Click to expand...
Click to collapse
What's it like stability wise?
NeophyteGS2 said:
What's it like stability wise?
Click to expand...
Click to collapse
I had used it briefly, was quite stable
I installed a stock based ROM and all the problems disappeared , I am never installing AOSP ROMs again
aliess said:
I installed a stock based ROM and all the problems disappeared , I am never installing AOSP ROMs again
Click to expand...
Click to collapse
:good:
Hi guys,
just finished building TWRP 3.0.2-0 for the Z5
Download
TWRP-for-CM (folder)
recovery_3.0.2.img (fastboot flashable file)
Source:
https://github.com/omnirom/android_bootable_recovery (TWRP, recovery - place in bootable/recovery-twrp)
https://github.com/CyanogenMod (CyanogenMod source)
https://github.com/Sony-Kitakami (place in .repo/local_manifests )
Build:
Code:
source build/envsetup.sh
lunch cm_sumire-userdebug
mka clobber && mka recoveryimage RECOVERY_VARIANT=twrp
Thanks to @moonbutt74 for bearing with me and all my questions :silly:
Not Working on E6633 , When I power on the device , Sony logo show and the device power off immediately
Edit :
It works Successfully , I had flashed It as a kernel hahaha
Thank You ^_^
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Sh4douw said:
Hello,
I've had the same issue than Sony guy (the device which power off after few seconds on the Sony logo), but I've had correctly flashed this recovery... I don't understand
Any idea ? I have also an E6633.
Thx
Click to expand...
Click to collapse
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Sh4douw said:
Sorry, I misspoke xD
I flashed it as a recovery btw.
But, by "it works Successfully", what did you mean ? You can access on the recovery or you can boot on CM13 ?
Indeed, my device power off not after the flash of the kernel and the recovery, but AFTER the flash of the CM13 + GApps.
So, if by "success" you meant that you can boot totally on CM13, which ROM and which kernel did you flashed ?
But if it concerned the recovery only, this is good, I have the same result than you x)
Click to expand...
Click to collapse
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Sony guy said:
Yeah I can boot into cm13
I used cm13 rom , cm kernel and this recovery
I flash GAPPS after the rom and I get setup wizard FC
so I did factory reset and then it works fine without problem
Click to expand...
Click to collapse
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Sh4douw said:
Oh, I see
Do you can link me which kernel and which ROM did you use ?
Also, what pack of GApps did you use ?
Sorry, it's the first time I try to flash a custom ROM, I'm little lost as you could see xD
Click to expand...
Click to collapse
Click here to download the rom
http://forum.xda-developers.com/xperia-z5/development/rom-cyanogenmod-13-sony-xperia-z5-t3356163/page11
And Gapps you can find it in the first page of the above thread
Okay, I don't understand why, but for booting on CM, I had to reflash the kernel !
Without it, my device power off one second after the Sony logo
It finally works, thanks you
Hi,
Are you able to make one for the Z5P??
some of us are still stuck at ver 2.8.
also, i have used your root kernel program with the lastest twrp and it can boot into recovery,since i am using a custom kernel, i think it will be nice if there is a flashable img file for the latest twrp.
Many thanks in advance.
Will this work with my new Z5, Android 6.0.1, totally stock?
Nayibmc said:
Will this work with my new Z5, Android 6.0.1, totally stock?
Click to expand...
Click to collapse
No. Just Cm/Aosp
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth?
Sergeyra29 said:
How can amplify the sound in Bluetooth?
Click to expand...
Click to collapse
Faux sound setting in Kernel Adiutor is not working(im on Z5 RR latest build plus Zach's kernel), but it working on Romaur 4.2.0 plus Aur-kernel 4.0.
try "FauxSound app v1.5" from play store, its worked with wired headset, maybe worked with Bluetooth too.
Sent from my Xperia Z5 using XDA-Developers mobile app
How can amplify the sound in Bluetooth mixer_paths?
Sorry wrong reply. XD
Sony guy said:
How did you flashed ? As kernel or as recovery ?
If as kernel you will have this problem . But as recovery it will work successfully
Click to expand...
Click to collapse
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
adize said:
I have questions:
1. How to install/flash as recovery? via adb fastboot?
2. Will this work on stock rom? if yes, what firmware?
Thank you
Click to expand...
Click to collapse
1 - fastboot flash recovery x.img
2 - I think this recovery is for CM ROM
You can search in the android development section for stock ROM , it works on all firmwares
Hi guys, noob question here: I have twrp old version, can I flash this in recovery?
And also I want to try the xz rom but tried flashing and didn't work, it is my understanding that it was caused by the old twrp and using this I'll be able to use that rom.
Thank you for your help.
Sent from my E6653 using XDA-Developers mobile app
[emoji41]
oh, sorry, wrong thread
Friends, am trying to test multiboot... i am right now USING Ressurrection Remix 6.0 with linux kernel. I´ve downloaded the app multiboot, but it says that i dont have a kexec hardboot kernel...
If you guys have experience in multiboot, please, tell me....
1 - How to use a kexec hardboot kernel? (i know flash kernel on ADB) .. but... what kernel should i use?
2 - Should i first flash the kernel, or install the rom? (because everytime i am using some rom, and flash other kernel, i got stuck on sony logo)
3 - I wanted to use a lollipop as primary and 6.0 as secundary.
Does we have some smart brain to help me figure it out? ( i ´ve been searching but... nothing about the kernel.. )
and i bet it´s going to be really usefull help to everyone....
check this
team_div said:
check this
Click to expand...
Click to collapse
i did it... but it doesnt work. I could never use lollipop and marshmallow roms. Multiroms seems to be a mistery for Z1 devices... even the app doenst support us anymore. And i still not understanding about kexec kernels :crying:
LinkRaf said:
i did it... but it doesnt work. I could never use lollipop and marshmallow roms. Multiroms seems to be a mistery for Z1 devices... even the app doenst support us anymore. And i still not understanding about kexec kernels :crying:
Click to expand...
Click to collapse
You can install a rom that has a kernel compatible with multiboot on 5.1.1 and then install the last multirom by drakonizer if I remember well and then install a MM Rom on secondary partition
benplay64 said:
You can install a rom that has a kernel compatible with multiboot on 5.1.1 and then install the last multirom by drakonizer if I remember well and then install a MM Rom on secondary partition
Click to expand...
Click to collapse
Yes, but i´ve searched it but couldnt find a rom with this kernel.... do you know a rom benplay?? i´ve downloaded a lot lol
LinkRaf said:
Yes, but i´ve searched it but couldnt find a rom with this kernel.... do you know a rom benplay?? i´ve downloaded a lot lol
Click to expand...
Click to collapse
Cm12.1 and jaguar are working for sure
This Kernel is compiled from Nitrogen Os repository (thanks @ xyyx ).Its completely stock kernel ,I haven't made any modification except fixing the Headphone Jack issue.Those who wants stock kernel with headphone jack issue fixed can try this. I have tested it with latest build of Nitrogen OS and DotOS. Those who wants future updates,Reply to this thread.
This stock kernel supports both Nitrogen OS and DotOS.
Special Thanks: xyyx ,AnyKernel Xda,psndna88
Downloads:
https://www.androidfilehost.com/?fid=3700668719832236058
other rom can use it?
Iyiren said:
other rom can use it?
Click to expand...
Click to collapse
Not tried it with other rom. You can try it since its basically stock kernel.
Not working in any rom ... Kernel itself ain't changing at all .
pfern_007 said:
Not working in any rom ... Kernel itself ain't changing at all .
Click to expand...
Click to collapse
Try this kernel with latest oreo build of NOS.I have flashed it on my device and its working fine.
https://www.androidfilehost.com/?fid=3700668719832236058
What did you do to fix the headphone jack problem? Also, will you be updating for future releases? Thanks.
BlueJeans said:
What did you do to fix the headphone jack problem? Also, will you be updating for future releases? Thanks.
Click to expand...
Click to collapse
Yes,there will be future releases if any kernel changes or updates occurs.
I am on the latest NOS build by @xyyx still I am unable to flash this kernel ... Recovery says flashed successfully ... But at the reboot the kernel is the same as it was on stock .... The kernel isn't flashed at all @GNVM PLEASE HELP !
pfern_007 said:
I am on the latest NOS build by @xyyx still I am unable to flash this kernel ... Recovery says flashed successfully ... But at the reboot the kernel is the same as it was on stock .... The kernel isn't flashed at all @GNVM PLEASE HELP !
Click to expand...
Click to collapse
Sorry man the zip was corrupted.Try below link its works with both Nitrogen OS,DotOS and any AOSP Based rom.Try it and let me know the status.
https://www.androidfilehost.com/?fid=3700668719832236058
Ye.. Thanks man it works ... Consider adding DTS to it as agni kernel has that darn good sound enhancement .... Your kernel has low sound ... But you saved me bro ... Nos + stock kernel is lit .... I had jack detection bug ... Now its solved ... Thanks mate
@GNVM Can you point me to the github commit for jack stuck problem fix?
fmir864 said:
@GNVM Can you point me to the github commit for jack stuck problem fix?
Click to expand...
Click to collapse
https://github.com/psndna88/AGNi_pureMIUI/commit/13a6a40d3762d475320fd64b475d1cbc87de3f82
https://github.com/psndna88/AGNi_pureMIUI/commit/29400ba981e296e8b9c94e99b1236813771660ea
Works on android P?
Can you make it for NOS pie?
Can I use this kernel on Kate PE 8.1?
@GNVM Please fix it for Latest NOS Pie kernel.