Related
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
hi all!
i have a problem with my samsung galaxy next.
I'm not able anymore to enter in recovery mode and also to root it (i have also tried to root it via pc).
If i try to enter in recovery mode (vol up+home+power) the phone says "ramdump mode".
Another problem is that if i try to restore factory settings the phone reboot in recovery mode showing some error and it doesn't restore factory settings.
I can just reload stock rom via odin :crying:
I would change rom, with the stock one the battery draining is unbearable.
the problem with the recovery mode came after i came back to stock rom (i have tried mod rom).
Try vol down+home+power. It will work.
EDIT: Oops this is the download mode! As other guys telling Home+Power only.
Poliorcete said:
hi all!
i have a problem with my samsung galaxy next.
I'm not able anymore to enter in recovery mode and also to root it (i have also tried to root it via pc).
If i try to enter in recovery mode (vol up+home+power) the phone says "ramdump mode".
Another problem is that if i try to restore factory settings the phone reboot in recovery mode showing some error and it doesn't restore factory settings.
I can just reload stock rom via odin :crying:
I would change rom, with the stock one the battery draining is unbearable.
the problem with the recovery mode came after i came back to stock rom (i have tried mod rom).
Click to expand...
Click to collapse
Turn off your phone, Hold your Power and Home button at the same time, when the Samsung logo comes up, release the power button BUT keep holding your HOME button. Then go Wipe data/factory reset, it's the same thing.
"Press "thanks" if I helped you "
Poliorcete said:
hi all!
i have a problem with my samsung galaxy next.
I'm not able anymore to enter in recovery mode and also to root it (i have also tried to root it via pc).
If i try to enter in recovery mode (vol up+home+power) the phone says "ramdump mode".
Another problem is that if i try to restore factory settings the phone reboot in recovery mode showing some error and it doesn't restore factory settings.
I can just reload stock rom via odin :crying:
I would change rom, with the stock one the battery draining is unbearable.
the problem with the recovery mode came after i came back to stock rom (i have tried mod rom).
Click to expand...
Click to collapse
You don't go into recovery by holding volup+home+power buttons. You go into recovery mode by holding only Home+Power buttons.
tietganFTW said:
You don't go into recovery by holding volup+home+power buttons. You go into download mode by holding only Home+Power buttons.
Click to expand...
Click to collapse
not downloading mode instead recovery mode
dheeraj (dhlalit11) said:
not downloading mode instead recovery mode
Click to expand...
Click to collapse
Oops sry, said it wrongly. Edited...
well, thank you all for the fast reply. I'm sure that before flashing the rom i had to press vol up+home+power...does maybe it changed with the new rom?
nah you took it wrong it was always home + power
volume up button is for galaxy s type devices
Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.
Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:
I'm glad to help you cheers
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Gidders said:
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Click to expand...
Click to collapse
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Brilliant - thank you. Why they can't have they have that in the Lineage install instructions?
Now running Lineage 15.1 = happy bunny
boxcar8028 said:
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Click to expand...
Click to collapse
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
notmyidea said:
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
Click to expand...
Click to collapse
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
sh0nuff said:
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
Click to expand...
Click to collapse
Got that figured out, thanks. All installed now after much difficulty.
notmyidea said:
Got that figured out, thanks. All installed now after much difficulty.
Click to expand...
Click to collapse
Good to hear! Please make sure you give a thumbs up to anyone who helped. It really keeps the community alive and kicking!
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
for some reason, my internal and external storage is showing 0 mb. Anyway to fix this?
Try formatting (not just wipe) data.
Should the Galaxy Tab S2 2016 be on TWRP 3.2.1.0 or the new 3.2.3.0 for Linage OS 15?
If so, can't you just flash the update using TWRP on the img file, or is ODIN on the tar needed?
OK, I updated to TWRP 3.2.3 using TWRP Recovery and the img file. Appears to work fine.
SvenHee said:
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
Click to expand...
Click to collapse
Sorry to revisit this issue. I can't get TWRP going on my S2 Tablet. I understand these instructions, but at the end of the ODIN installation there are two possibilities that I can see. If you set the ODIN to automatically reboot then you cannot do the above because it says to do it from completely powered off.
If you don't set ODIN to reboot automatically I can't get the tablet to turn off. I can only get it to boot by holding home+volume down + power. How do I get the tablet to power off before booting??
I am using ODIN 3.14.4 and TWRP-3.7.0 9-0-gts28wifi.img.tar and my stock firmware is NRD90M.T713XXS2BSG1 with Kernel 3.10.84-14953299
Thank you.
I believe i've royally screwed up and i want to know if there's anything I can do to save my phone.
I downloaded the latest BeyondROM from here after being on a previous version for about a year (not sure which one I was on):
https://forum.xda-developers.com/ga...evelopment-exynos/rom-beyondrom-v6-0-t4017921
I flashed the zip file through TWRP and only after flashing did I realize that I was on TWRP 3.3.1-11 and not 3.4.0-3, which I'm guessing is why my phone is now stuck on the boot logo when I boot it. I went back into TWRP and cleared the Dalvik & standard cache again after this but no dice.
But it gets worse. I then tried to upgrade to 3.4.0-3 by flashing it from TWRP 3.3.1-11 using the recovery partition, hoping to reflash the firmware after doing so.
After doing this and my phone rebooting, not only am I stuck on the boot screen, but now I can no longer enter recovery mode either by holding Bixby + Vol Up + Power. My phone isn't recognized by my PC or Odin now either.
Is my phone completely bricked, or is there a way to salvage this mess i've made?
Could really use some help.
Thanks guys.
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
XTrail02 said:
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
Click to expand...
Click to collapse
Thanks for the suggestion, however that's my primary issue. I can't get to download mode (which really should be recovery mode since I have TWRP).
Do you think it could be an issue with me rebooting to recovery mode after upgrading TWRP using TWRP itself? Maybe my phone needs to be hard powered off once to access TWRP again?
And since I have that failed ROM install, the only way to power off the phone would be to wait for the battery to drain.
Power+volume down+Brixby goes right into download mode bypassing the recovery
TheMassiveEffect said:
Power+volume down+Brixby goes right into download mode bypassing the recovery
Click to expand...
Click to collapse
My phone just keeps restarting when Power + vol down are held. Looks like draining the battery didn't help either. I'm stuck on the boot screen even when plugged in with 0% battery. When I remove the USB Cable and hold Vol down + Power, the phone seems to turn off because there's no battery, but immediately after plugging in a power cable, the phone automatically turns on by itself again.
You can try this, but best not to flash anything without charging battery first. You can charge while phone is off: