So today i wanted to unlock the bootloader for my Xperia Z C6003. From the instructions they stated that i have to shut down the phone and connect it to usb while holding the vol+ button. When i did that, the phone remained black and the computer is not able to detect my phone anymore. I tried different hardware button combinations but the phone could not power on. The computer detects it as QHUSB DLOAD driver but is unsuccessful in installing it. So i downloaded Gordon's Gate flash and it is recognized as Zeus Flash Device, but S1 tools is unable to flash this phone as it is not supported as it is a prototype (IMEI 0044). So now i am stuck with a bricked phone, anyone able to help me unbrick it? ): Help is much appreciated!
Hello everybody, :cyclops:__ sorry for my bad English __ :cyclops:
I have a big problem in my huawei p9 after soft update, i leave it for a night to complete the process of download, is updated but stay reboot again and again, i tired to install another firmware but nothing happened :crying: :crying: , so i googled for howa to install firmware via pc, i found by adb fastboot, and i flashed, but (Developer options, Screen lock & password, Camera, torch ...) Not working, i downloaded many firmware nothing works fine, i don't have a Box to repair this big problem.
Any help please please, any tool to update from pc
:crying: :crying:
:crying:
:crying: :crying: :crying:
:crying:
:crying:
Been there before, but recovering it is rather easy, first of all you have to install TWRP, you can do this by connecting the USB to your phone and PC and holding volume down to get to the white download mode screen, next use ADB, put the TWRP image in the ADB folder and type this: "fastboot flash recovery <twrp image name>.img" (without the "") from there remove the USB cable and reboot holding power and volume up until the Huawei logo appears, boot into TWRP and connect the USB cable back again. On your PC download a firmware for the phone and use Huawei Update Extractor to unzip it, find UPDATE.APP and keep it on the desktop. With your phone connected to your PC make a folder on the phone named "dload" and copy the UPDATE.APP file into it.
Shut the phone down and disconnect the USB cable, next hold volume up, down and power (yes, all three) and the phone should automatically force install the firmware and it should be fine from then on.
Hope this helps.
gamr13 said:
Been there before, but recovering it is rather easy, first of all you have to install TWRP, you can do this by connecting the USB to your phone and PC and holding volume down to get to the white download mode screen, next use ADB, put the TWRP image in the ADB folder and type this: "fastboot flash recovery <twrp image name>.img" (without the "") from there remove the USB cable and reboot holding power and volume up until the Huawei logo appears, boot into TWRP and connect the USB cable back again. On your PC download a firmware for the phone and use Huawei Update Extractor to unzip it, find UPDATE.APP and keep it on the desktop. With your phone connected to your PC make a folder on the phone named "dload" and copy the UPDATE.APP file into it.
Shut the phone down and disconnect the USB cable, next hold volume up, down and power (yes, all three) and the phone should automatically force install the firmware and it should be fine from then on.
Hope this helps.
Click to expand...
Click to collapse
Nop a tried all of the solution, i flashed recovery,system,boot (.img) through adb fast boot, nothing works fine, after turning up the phone ( Bluetooth not working, camera not found, security& password not woking, i cant access to Developer options)...., I think i flashed a bad firmware
just signed up to try to fix this problem myself, never used a forum before haha but i was a idiot.
im hoping that im just being an idiot and putting the wrong update in the dload folder, but ive also tried to do all of the steps above. then tried to upload a custom rom but none of them seem to want to work either. been trying to fix this for the last 2 days with no luck.
Hello guys
My xperia zr device got hard bricked after flashing by twrp recovery official edition
I made a restart then the device got dead.
1-I tried to press power button the device viberated but nothing else.
2-I tried to connect the device using xperia companion but still nothing.
3-My device only detected as S1 Service !!!.
4-I tried to flash it using S1 tool using the emergency mode by the test point after disassemble the motherboard.
but the pc got hanged then I got this error (
llbug: [\\?\USB#Vid_0E0F&Pid_0001#6&1636b011&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "Access is denied")
anybody can help?
After an update with fastboot I restart and do not turn on, no recovery no fastboot mode.
please help!!!
the pc recognizes it as Qualcomm HS-USB QDLoader 9008
First, you need to wait for the battery to drain completely.
Then you need to prepare an sd card and boot from it.
......
Hi Mates. Please help!!!
I have the same issue. Moto e4 plus xt1776 completely dead after trying stock rom installation. Even I tried with sd boot image but y failed. I'm not clear enough about battery affair, can anybody help? I mean can you be enough specific with some solution or some step by step. Please help me I can't believe my phone is dead
i have the same issue but with the xt1775 moddel, do not turn on, no recovery no fastboot mode nothing, and dont know how to start to make alive again, and the pc only said unknown usb device (device descriptor request error)
.
Will you ever try to download another version of the rom or are you insisting on trying to install the same rom?
My device is the XT1773 if I have a version of my rom that when I try to flash it it leaves my device "dead".
and when i try another version my phone starts
normally.
Remember, you need to have your device drivers installed correctly.
I flashed twrp first and then tried to flash Emui8.0. but that system was for honor 6x.
After everything was done. I restarted my phone. I saw the display turn dark and it couldn't show me anything even if I pressed the power button
Since it does not respond to any buttons it seems that you hard bricked your phone. Try connecting it to Hisuite on Pc if it dettects your phone than you did not brick your phone. If the phone is detected just do system recovery. If your phone is hard bricked well... you are fu####. Do not know how to un brick it so search the forums.
Kamikaza101 said:
Since it does not respond to any buttons it seems that you hard bricked your phone. Try connecting it to Hisuite on Pc if it dettects your phone than you did not brick your phone. If the phone is detected just do system recovery. If your phone is hard bricked well... you are fu####. Do not know how to un brick it so search the forums.
Click to expand...
Click to collapse
it can detect my phone but Hisuite failed to flash recovery