Related
Hi all. Phone is rooted and unlocked. Have twrp installed. Made a twrp backup, downloaded a new ROM (aosp). Wiped phone as in op, flashed new ROM & gapps. Upon restating, phone asked for password. I'd made sure that I'd got rid of security seetings before making backup. Tried to reinstall backup, phone boots into startup screen, then again, asks for "to start android device, enter your password". Please help.
Try deleting this file in twrp using the file manager.
/data/system/locksettings.db
954wrecker said:
Try deleting this file in twrp using the file manager.
/data/system/locksettings.db
Click to expand...
Click to collapse
Hi many thanks....but when I go into file manager, there is no file for data????
I think I've killed the phone. Any way of completely wiping and starting again?
The 3 buttons at bottom of screen. When I press the right button, message I get is:
Failed to decrypt data.
Unable to decrypt with default password. You may need to perform a format data.
Updating partition details....
.....done
Unable to mount storage
Full selinux support is present.
https://forums.oneplus.net/threads/android-password-after-locking-the-bootloader.454675/
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
forcedairinduction said:
Hi all. Phone is rooted and unlocked. Have twrp installed. Made a twrp backup, downloaded a new ROM (aosp). Wiped phone as in op, flashed new ROM & gapps. Upon restating, phone asked for password. I'd made sure that I'd got rid of security seetings before making backup. Tried to reinstall backup, phone boots into startup screen, then again, asks for "to start android device, enter your password". Please help.
Click to expand...
Click to collapse
Glad you came here, it is simple to solve this.
1. put your device into bootloader mode
2. connect your device to pc via usb
3. install minimal adb and open command prompt in that minimal adb folder.
4. enter command - fastboot erase userdata
5. solved. but sorry, it will wipe your internal memory too.
you can even try wiping data with twrp, but it'll usually won't work at this stage. so follow the command. cheers.
Karthik_pm said:
Glad you came here, it is simple to solve this.
1. put your device into bootloader mode
2. connect your device to pc via usb
3. install minimal adb and open command prompt in that minimal adb folder.
4. enter command - fastboot erase userdata
5. solved. but sorry, it will wipe your internal memory too.
you can even try wiping data with twrp, but it'll usually won't work at this stage. so follow the command. cheers.
Click to expand...
Click to collapse
Thanks man. I managed to get it going but only by wiping data. Lost my backup and ROM seems to have flashed but is missing root
forcedairinduction said:
Thanks man. I managed to get it going but only by wiping data. Lost my backup and ROM seems to have flashed but is missing root
Click to expand...
Click to collapse
Simply flash supersu 2.79 from the XDA thread, everything will be back alright.
hi,
I bought a new Huawei P10 lite phone, unlocked the bootloader, installed TWRP and with this I installed SuperSU via microSD card.
Everything worked fine, until now. Now I want to backup my current modified stock ROM, but TWRP failes.
I got the problem very fast: TWRP can read all files and folders on the microSD car, but not in the internal storage folder.
The file structure is like the following:
acct
boot
cache
config
data
...
etc
external_sd <-- the microSD card
mnt
...
sbin
sdcard
storage
...
Click to expand...
Click to collapse
Everything can be read by TWRP, except the sdcard folder.
Here he only shows strange names (crypted I guess):
something like:
2h8P9lGY8I1A884LMsBjaA
2u+nb0LdBNopRSa5LehsvB
75aTrCvYkWG+R+lrcRz6WA
DcwYkwSKokq8Rm5lYc4YYC
...
Click to expand...
Click to collapse
This strange folders occure within TWRP itself and also if I mount the storage to the computer via TWRP.
I also can not modify, delete or add anything in this cryted folder.
So what am I doing wrong? Why is this crypted and can not be read?
During my research I found this post on reddit with the same problem. But the solution is not clear to me and also not working.
Thanks for any help
greetings
Christopher
PS.: Here some specific information about the phone:
brand new Huawei P10 lite
model WAS-LX1A
build nr. WAS-LX1AC432B102
no updates avaible, checked twice
EMUI 5.1 with Android 7.0
TWRP v3.1.0-2 from here (named "TWRP_P10_Lite_Beta.img")
Hey
It's because your files are encrypted due to forceecnryption and dm-varity in the kernel you can try formating the data to see if it removes the encryption from the data.
My infos may not be correct you can read more about dm-varity and forceecnryption in the internet
aburezk said:
Hey
It's because your files are encrypted due to forceecnryption and dm-varity in the kernel you can try formating the data to see if it removes the encryption from the data.
My infos may not be correct you can read more about dm-varity and forceecnryption in the internet
Click to expand...
Click to collapse
Ok, thanks a lot. This was helful so far.
From what I read, I now must flash a new "boot.img" in order to disable force encryption. But where do I get such a file for my Huawei P10 lite (WAS-LX1A)? I did not found one. Maybe the phone is too new? Or am I just blind?
greetings
christopher2007 said:
Ok, thanks a lot. This was helful so far.
From what I read, I now must flash a new "boot.img" in order to disable force encryption. But where do I get such a file for my Huawei P10 lite (WAS-LX1A)? I did not found one. Maybe the phone is too new? Or am I just blind?
greetings
Click to expand...
Click to collapse
you can't find it anywhere
aburezk said:
you can't find it anywhere
Click to expand...
Click to collapse
Ok, so too new ... damn. That is very bad.
christopher2007 said:
Ok, so too new ... damn. That is very bad.
Click to expand...
Click to collapse
I managed to disable force encryption on my device
Download this and flash it
Backup your data and wipe data from twrp
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I tryed no-verity-opt-encrypt-6.0.zip but now do not start anymore... I have restore boot and system but none... what can I do? I think i will sell this p10 lite...
simona70 said:
I tryed no-verity-opt-encrypt-6.0.zip but now do not start anymore... I have restore boot and system but none... what can I do? I think i will sell this p10 lite...
Click to expand...
Click to collapse
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
ChipCollector said:
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
Click to expand...
Click to collapse
I solved using "update_data_full_public.zip" and clearing /data, after restoring previuos boot.img and system.img .
My phone was WAS-LX1AC432B102 4gb EMUI5.1 Android 7.0. I had bricked before and the only way to unbrick was to use "Warsaw-L21_C432B182_EU_SERVICE_androidhost.ru"
I do not trust to install data into a phone i can't backup and restore with TWRP... there is another way to make /data not crypted?
Exist the hope one day TWRP read also crypted /data or it is better search another phone?
ChipCollector said:
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
Click to expand...
Click to collapse
Hey, I am having the exact same problem, my phone is soft bricked after no-verity-opt-encrypt-6.0.zip. (https://forum.xda-developers.com/p10/help/stuck-device-booting-flashing-rom-t3713503).
I know the build of my phone, and I downloaded the update.app and extracted it to boot.img, recovery.img, system.img, but how exactly can I restore it in the fastboot mode. What commands?
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
---------- Post added at 04:35 PM ---------- Previous post was at 04:32 PM ----------
Anymore I think P10lite is a lost cause. I sell to my mother. I bought a xiaomi redmi note 4 global. Never again a Huawei. What a disappointment.
You'll sale your phone to your? Mother? To your mother?
Anyway the same story is on redmi note and all xiaomi
Phones
All the Chinese are difficult to modify.
I was have all Nexus thru 2011 very easy phones but the Chinese... My...
I have a doubt, I have bundled it when trying to install root on my device and I ended up in bootloop what I did was install a (official) rom which when entering the internal files, the folders were with strange names appear, so you recommend removing the credentials (decrypt), to be able to install root? My Device is Xiaomi mi A2
Bro did you find a solution..I am having same problem help
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
chimeralounge said:
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
Click to expand...
Click to collapse
Legend. This fixed the same issue we were facing on the t510 Samsung tablet. Saved us a lot of trouble. Thanks for this.
memz180 said:
Legend. This fixed the same issue we were facing on the t510 Samsung tablet. Saved us a lot of trouble. Thanks for this.
Click to expand...
Click to collapse
-----------
Cool, glad to help! In fact, this issue happened to me once again a few weeks back, when LegacyOS updated. I had this "f*** here we go again" moment, but before wiping, I decided to use TWRP > Advanced > Fix Content. Not only I got the system working again, but *all my data was intact*. System updates are messing file tables, apparently.
I want to marry TWRP.
chimeralounge said:
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
Click to expand...
Click to collapse
God bless you! i've struggle with this s]+t for hours!
what worked for me is installing siankatabg-twrp , now i can see names fine
after that i changed back to official version (which was missy before) and still fine !!!!!!!!
then installed orange fox (which was missy before) and still fine !!!!!!!!
WTH !!!!!!!!!!!!
so i think best shot (if u dont have siankatabg-twrp) is installing codeworkx (Lineage recovery) make sure all good then go back to ur favorite.
lemme know if its works
Disable forced encryption of data partition. Get little better performance and internal sd + data mounting in TWRP
Things needed:
Unlocked Max pro with TWRP flashed
Instructions:
1. Download the decrypt.zip and move/copy to sdcard/otg drive
2. Flash in recovery
3. Format /data
4. Reboot
If it fails to boot (bootloop?) flash latest magisk and reboot.
res
First,
We get better performance after flashing this ?
Is this affect to the battery ? Drains or something ?
Greetings
gusbalaa said:
First,
We get better performance after flashing this ?
Is this affect to the battery ? Drains or something ?
Greetings
Click to expand...
Click to collapse
Differences should be minor as max pro has good cpu, but I can't test as i don't have it.
ahhhhhhhhhhhhhhhhhhhhhhh THANKS SIR
i so damn happy !! thanks fix all twrp + root and happy
Hey.....Am still getting bootloop......plz help.
Akky_karan said:
Hey.....Am still getting bootloop......plz help.
Click to expand...
Click to collapse
SD 636 already has hardware acceleration for encryption and decryption so no major effecrts.
Flash decrypt from twrp?
Can i flash decrypt from twrp? Because i already installed twrp on my device.
Sorry for my bad English
unlock.bat file not working
i understand the whole process i click on the unlock.bat file cmd appers and dissapears and nothing happens phone doesnt reboot after some time i reboot my phone manually still no changes in my phone starts normally. am i missing something. do i have to enable usb debugging mode or what?
plz hel
hi
so if i want to leave data partition encrypted, will twrp not be able to mount it?
what about rwrp?
can i just not enter a password when getting into recovery to let recovery read it
if i dont flash this zip, just flash twrp boot into it cancle the password prompt and swipe to modify system and dont change anything in options or flash magisk and reboot into stock does the twrp get replased by stock recovery cause it hapend to me and i am totally confeused on what to do next
it says
E: could not extract 'META-INF/com/google/android/update-binary'
Error installing zip file './external_sd/decrypt.zip'
Hi!!
Can you please also make a force encrypt, in case we want to revert back to encryption?
Thanks.
cant download th decrypt file
cant download th decrypt file
How to unlock unofficially in Ubuntu?
Sudeep Duhoon said:
Disable forced encryption of data partition. Get little better performance and internal sd + data mounting in TWRP
Things needed:
Unlocked Max pro with TWRP flashed
Instructions:
1. Download the decrypt.zip and move/copy to sdcard/otg drive
2. Flash in recovery
3. Format /data
4. Reboot
If it fails to boot (bootloop?) flash latest magisk and reboot.
Click to expand...
Click to collapse
Will this zip wipe everything?
"To start android enter password" (or so, my device not english)
What is the password?
tagilbo said:
"To start android enter password" (or so, my device not english)
What is the password?
Click to expand...
Click to collapse
Your lockscreen code
Prakashgolwalkar said:
i understand the whole process i click on the unlock.bat file cmd appers and dissapears and nothing happens phone doesnt reboot after some time i reboot my phone manually still no changes in my phone starts normally. am i missing something. do i have to enable usb debugging mode or what?
plz hel
Click to expand...
Click to collapse
open cmd and cd to the path containing unlockXXX files and just type unlock .
Hey,
in magisk is "preserve force encryption" shoud be clicked?
Thanks
Hi,
is anybody able to get encryption working on MI8 under xiaomi.eu Rom?
I tried several times with "old" Android O and new Android P Roms from Xiaomi.eu, but after "encryption" my data partition was useless and I've to format my phone completely.
I'm on the newest 'unofficial' recovery-TWRP-3.2.3-0918-XIAOMI8-CN-wzsx150.zip and on xiaomi.eu 8.9.20.
Thanks
hi!
you need to edit vendor/etc/fstab.com
in the file there is "encryptable=ice", you need to change that to "fileencryption=ice"
but you need to format data after that, i dont think it will work if you dont
t0mas_ said:
hi!
you need to edit ventor/etc/fstab.com
in the file there is "encryptable=ice", you need to change that to "fileencryption=ice"
but you need to format data after that, i dont think it will work if you dont
Click to expand...
Click to collapse
interesting... next time i've to do a clean flash, 'll try to encrypt the device. Hope it works.
t0mas_ said:
hi!
you need to edit ventor/etc/fstab.com
in the file there is "encryptable=ice", you need to change that to "fileencryption=ice"
but you need to format data after that, i dont think it will work if you dont
Click to expand...
Click to collapse
Hi t0mas,
I don't have ventor on the phone but I've found vendor, can you confirm whether it was a typo or not?
As for the file itselft, I found a resemblence named fstab.qcom in /vendor/etc/.
Fyi I'm on Mi 8 8.9.24 Xiaomi.eu ROM. In order to search for the file mentioned in your post, I went through TWRP and mounted Data, Cache, System, Vendor and Persist.
Thanks for your assistance
Hi
Does it work this way?
Gunshin82 said:
Hi t0mas,
I don't have ventor on the phone but I've found vendor, can you confirm whether it was a typo or not?
As for the file itselft, I found a resemblence named fstab.qcom in /vendor/etc/.
Fyi I'm on Mi 8 8.9.24 Xiaomi.eu ROM. In order to search for the file mentioned in your post, I went through TWRP and mounted Data, Cache, System, Vendor and Persist.
Thanks for your assistance
Click to expand...
Click to collapse
oh sorry about that, of course it is a typo. i ment /vendor/etc/fstab.qcom
edit:also roccected my original post to avoid confusion
t0mas_ said:
oh sorry about that, of course it is a typo. i ment /vendor/etc/fstab.qcom
edit:also roccected my original post to avoid confusion
Click to expand...
Click to collapse
SpiderSGS6 said:
Hi
Does it work this way?
Click to expand...
Click to collapse
Thanks, I'll give it a try and let you know if everything worked out fine.
---------- Post added at 01:32 PM ---------- Previous post was at 12:51 PM ----------
t0mas_ said:
hi!
you need to edit vendor/etc/fstab.com
in the file there is "encryptable=ice", you need to change that to "fileencryption=ice"
but you need to format data after that, i dont think it will work if you dont
Click to expand...
Click to collapse
So in TWRP, I've renamed the fstab.qcom to old_fstab.qcom_old and copied the modified file to /vendor/etc and did a data wipe. I've rebooted the phone to system but it goes to TWRP splash screen and stays there. If I reboot the phone again, it just reboots to TWRP splash screen so my phone is pretty much stuck.
did you set correct permissions? another thing I did is flash magisk. other than that it should work as far as I know...
t0mas_ said:
did you set correct permissions? another thing I did is flash magisk. other than that it should work as far as I know...
Click to expand...
Click to collapse
My phone isn't rooted.
Right now, I can't do anything, even tried to connect it via adb but it doesn't list when I type the command adb devices
Gunshin82 said:
My phone isn't rooted.
Right now, I can't do anything, even tried to connect it via adb but it doesn't list when I type the command adb devices
Click to expand...
Click to collapse
and you did format userdata?
try starting with that. format, not wipe. you have to type in "yes" to confirm. internal sd will be wiped.
flash rom again. adb pull the file, edit it, insert it it attached zip and flash that. download latest magisk and flash that. if that doesnt work, i have no idea, sorry
I can't do any of that because the phone doesn't go in the TWRP menus, it stays at the splash screen.
I've managed to access the phone via adb but I can't access /vendor/etc/. I'm trying to put back the original file in place but when I do adb shell ls /vendor/, the only thing I see is compatibility_matrix.xml, lib64 and manifest.xml.
I'm also looking at the option of flashing the vendor partition with an image file but I can't seem to find the chinese ROM for v8.9.24
---------- Post added at 03:21 PM ---------- Previous post was at 03:07 PM ----------
t0mas_ said:
and you did format userdata?
try starting with that. format, not wipe. you have to type in "yes" to confirm. internal sd will be wiped.
flash rom again. adb pull the file, edit it, insert it it attached zip and flash that. download latest magisk and flash that. if that doesnt work, i have no idea, sorry
Click to expand...
Click to collapse
I can't because it doesn't go into the TWRP menu, I'm stuck at the blue splash screen.
I've managed to connect to the phone via adb but can't seem to access /vendor/etc/. When I do adb shell ls /vendor/ the only thing I see are compatibility_matrix.xml, lib64 and manifest.xml
**double post, sorry for that, I didn't see that my post went to the second page**
Gunshin82 said:
I can't do any of that because the phone doesn't go in the TWRP menus, it stays at the splash screen.
I've managed to access the phone via adb but I can't access /vendor/etc/. I'm trying to put back the original file in place but when I do adb shell ls /vendor/, the only thing I see is compatibility_matrix.xml, lib64 and manifest.xml.
I'm also looking at the option of flashing the vendor partition with an image file but I can't seem to find the chinese ROM for v8.9.24
Click to expand...
Click to collapse
now you lost me a bit. twrp splash or xiaomi splash screen?
if twrp, you are accessing twrp system from adb, which is separate from phone. you can try to boot in fastboot and format cache. still you did you format or wipe data before that happened? that is important.
edit: you can also format userdata from fastboot
t0mas_ said:
now you lost me a bit. twrp splash or xiaomi splash screen?
if twrp, you are accessing twrp system from adb, which is separate from phone. you can try to boot in fastboot and format cache. still you did you format or wipe data before that happened? that is important.
edit: you can also format userdata from fastboot
Click to expand...
Click to collapse
Yes, TWRP and that's where I'm accessing adb.
Not sure how to format cache in fastboot, I'll look it up
Here are the steps that I did:
1-Copy the file fstab.qcom
2-Modify the copy
3-Boot in TWRP
4-Renamed original fstab.qcom in /vendor/etc to old_fstab.qcom_old
5-Copied the modified fstab.qcom file to /vendor/etc
6-Wipe Data
7-Reboot to system
Since then, I can only reboot to TWRP splash screen or fastboot
Gunshin82 said:
Yes, TWRP and that's where I'm accessing adb.
Not sure how to format cache in fastboot, I'll look it up
Here are the steps that I did:
1-Copy the file fstab.qcom
2-Modify the copy
3-Boot in TWRP
4-Renamed original fstab.qcom in /vendor/etc to old_fstab.qcom_old
5-Copied the modified fstab.qcom file to /vendor/etc
6-Wipe Data
7-Reboot to system
Since then, I can only reboot to TWRP splash screen or fastboot
Click to expand...
Click to collapse
as far as i can tell, you did 2 things wrong
1 is you didnt format data
2 didnt set permissions
maybe 3 that backup file.
do this
fastboot format cache
try to reboot into twrp, be sure it doesnt get to booting into system
if this works, backup your sd and format userdata
if that doesnt work, boot into bootloader again
format cache again just to be shure
fastboot format userdata
this should get you to twrp. there you can flash eu again and try to boot. as far as i know eu contains vendor, so you should be fine.
if this doesnt work, the next thing i would try is to fastboot flash stock rom. be sure not to lock bootloader! in this case you might end up with a hard brick.
I'm editing my answer because it crossed your response.
So I'm guessing that Wipe Data isn't the same as format data... As for the permissions, I don't see anything regarding this, can you give me more details?
So I did a format cache and then rebooted and went directly to TWRP but it remains on the splash screen so can't access the menu.
Next step, I'll try to format the userdata as suggested and flash eu rom
maybe reflashing twrp would also help
t0mas_ said:
maybe reflashing twrp would also help
Click to expand...
Click to collapse
I'm able to access the TWRP menu. Right now I'm copying the ROM from Xiaomi.eu. I tried sideloading it but it couldn't read the file for some reason. Transfer just finish, I'll flash the rom via TWRP and get back to you after. Thanks for you help on this!!
Gunshin82 said:
I'm able to access the TWRP menu. Right now I'm copying the ROM from Xiaomi.eu. I tried sideloading it but it couldn't read the file for some reason. Transfer just finish, I'll flash the rom via TWRP and get back to you after. Thanks for you help on this!!
Click to expand...
Click to collapse
no problem, im glad you got it working.
Ok so ROM installation is done and I've pulled the fstab.qcom from vendor/etc and it's back with the encryptable variable. Phone reboots in system without any problems, just need to reconfigure everything, good thing I backed up.
I'll still need to encrypt the phone. You've mentioned the steps that I did wrong. Could we go through the proper steps for this?
Sent from my MI 8 using Tapatalk
Gunshin82 said:
Ok so ROM installation is done and I've pulled the fstab.qcom from vendor/etc and it's back with the encryptable variable. Phone reboots in system without any problems, just need to reconfigure everything, good thing I backed up.
I'll still need to encrypt the phone. You've mentioned the steps that I did wrong. Could we go through the proper steps for this?
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
dont restore the phone yet
edit file
put it in the zip i posted on prevoius page
go in recovery
format userdata->confirm with typing in yes
flash zip
i allways flashed magisk also, not sure if this is necesarry
if you just flash without formatting, you will probably break stuff again
I am just new to this flashing custom roms or firmware and twrp also. And dumb enough to not back it up.
I wanted to install arrow os in my phone. When I was about to wipe data, cache and dalvik, I accidentally checked metadata also and wiped. Then problems created more problems.
problems right now:
I cant put a file in my storage
Internal Storage is just blank on my pc
No OS
TWRP on both slots
please help me i really needed help and knowledge about it
I hope the attachment helps
EDIT--
Solutions to my problems:
WHEN you softbrick your phone and you only have fastboot and nothing else
Thanks to this guy..
SOLUTION: download your original firmware but choose the fastboot one and not recovery after download just unzip. Double click flash_all.bat and its back to square one.
WHEN you dont know how to flash or the file you have is .img
SOLUTION: find a guide in xda because apparently you can install a .img file in "fastbootd" mode
the guides here: https://forum.xda-developers.com/t/...sues-all-without-any-custom-recovery.4337099/
COMMENT: not the usual thats what on top of youtube search.
WHEN you see errors in twrp/orangefox recovery you might get panic and search for solution.
COMMENT: try to find and use a solution that doesnt delete something first. In my experience it got bricked even more.
Thanks to the people who commented back on my post and helping me get to know what to do next.
Try putting the stock ROM on a SD card or usb (if you have a dongle).
georg3_ said:
Try putting the stock ROM on a SD card or usb (if you have a dongle).
Click to expand...
Click to collapse
SD card that you put on beside the sim? if yes
Do I download stock ROM in official website? Cus I dont have 1 right now
then flashing it there by using twrp? is that how its gonna run? because i really dont wanna assume and create another problem
Try flashing this stock ROM (global) from a SD card, in TWRP. It's a recovery package, so you can install it as any zip.
Also, can you boot into fastboot/bootloader from TWRP?
Plus, where did you get the ArrowOS image? There are no builds, official or not.
georg3_ said:
Plus, where did you get the ArrowOS image? There are no builds, official or not.
Click to expand...
Click to collapse
I found it here
It is made my myst33d and it is a beta build
im getting a sd card right now to test it out
And yes I still can go to fastboot/bootloader from twrp
I cant seem to find my file in twrp... even in file manager
the file is int .tgz must I change it to .zip?
raikiro1 said:
I cant seem to find my file in twrp... even in file manager
Click to expand...
Click to collapse
Is the twrp detecting your sd card？try click on the Install image and change to install zip
can you sideload?
I can now see it, I think I reflashed twrp, now I can, but I cant install because of failed to mount system_root and I have done change file system of data to Ext4. when it resets it comes back to f2fs
edit: change file system of data to Ext4 failed
edit2: thank you guys really for commenting back and helping me
is no verity affecting it? cus I am not able to install it now
you should format data and put the arrow build in it, maybe it will work
J6idot said:
you should format data and put the arrow build in it, maybe it will work
Click to expand...
Click to collapse
I have changed the data to Ext4, fomarted, wiped again the data,dalvik and cache
I have a Redmi Note 10S Rosemary from xiaomiupdater but I still cannot install the rom cus there is a error " Error installing zip file /sdcard1/thefile."
I tried to install no verity opt encrypt but failed and says updater process ended with ERROR: 1
Error installing zip file "sdcard1/thefile"
raikiro1 said:
I cant seem to find my file in twrp... even in file manager
the file is int .tgz must I change it to .zip?
Click to expand...
Click to collapse
Must change it to zip.
EDIT: Extract the file, there's a zip or img inside.
raikiro1 said:
I have changed the data to Ext4, fomarted, wiped again the data,dalvik and cache
I have a Redmi Note 10S Rosemary from xiaomiupdater but I still cannot install the rom cus there is a error " Error installing zip file /sdcard1/thefile."
I tried to install no verity opt encrypt but failed and says updater process ended with ERROR: 1
Error installing zip file "sdcard1/thefile"
Click to expand...
Click to collapse
Try to sideload it, maybe it'll work.
georg3_ said:
Must change it to zip.
Click to expand...
Click to collapse
Should have said "extract the file, there's a zip or img inside", don't change the file extension.
Update: I found the guide how to sideload ... just change the Ext4 to F2fs
[Tutorial] TWRP ADB Sideloading
Alternative solution: OTG usb flash drive - With one of these, you can store a ROM zip safely, and still format ‘userdata’ to f2fs or EXT4. TWRP ADB Sideloading Requirements: Mac | Linux | Windows PC / Laptop and TWRP Custom Recovery Moto G...
forum.xda-developers.com
and I was able to sideload it and then got MIUI finally
what worried me is there were still errors like system_root, vendor and product... and its running fine now I guess but im back on track to make it to arrow OS.... I hope no mistakes this time like deleting metadata.
Thank you all who replied to this post , I really do. Thank you
raikiro1 said:
Update: I found the guide how to sideload ... just change the Ext4 to F2fs
[Tutorial] TWRP ADB Sideloading
Alternative solution: OTG usb flash drive - With one of these, you can store a ROM zip safely, and still format ‘userdata’ to f2fs or EXT4. TWRP ADB Sideloading Requirements: Mac | Linux | Windows PC / Laptop and TWRP Custom Recovery Moto G...
forum.xda-developers.com
and I was able to sideload it and then got MIUI finally
what worried me is there were still errors like system_root, vendor and product... and its running fine now I guess but im back on track to make it to arrow OS.... I hope no mistakes this time like deleting metadata.
Thank you all who replied to this post , I really do. Thank you
Click to expand...
Click to collapse
no problem next time installing, stick to sideloading, less room for error
I cant seem to install TWRP recovery again it justs bootloop .. I dont know why anybody knows?
Whenever I fastboot boot twrp3.6.1-rosemary it fails, says too many links, and when I fastboot reboot recovery it boot loops
flashboot flash boot twrprosemary says okay in slot A and I even put it to B and flash it there sadly
the problem might be because its A12 ... just an update
raikiro1 said:
I cant seem to install TWRP recovery again it justs bootloop .. I dont know why anybody knows?
Whenever I fastboot boot twrp3.6.1-rosemary it fails, says too many links, and when I fastboot reboot recovery it boot loops
flashboot flash boot twrprosemary says okay in slot A and I even put it to B and flash it there sadly
the problem might be because its A12 ... just an update
Click to expand...
Click to collapse
A12 shouldn't be a problem.
Probably you should flash another vbmeta.img.
OR
I don't know if there is an .img twrp around, but if there is you can:
Code:
fastboot boot {recovery.img}
and then [Advanced]>[Install Recovery Ramdisk].
raikiro1 said:
I cant seem to install TWRP recovery again it justs bootloop .. I dont know why anybody knows?
Whenever I fastboot boot twrp3.6.1-rosemary it fails, says too many links, and when I fastboot reboot recovery it boot loops
flashboot flash boot twrprosemary says okay in slot A and I even put it to B and flash it there sadly
the problem might be because its A12 ... just an update
Click to expand...
Click to collapse
what vbmeta are you using?