Hey all. I have XT1095 model. when i rooted, twrped and unlocked bootloader, then install 7.1.1 rom, about phone and cpu programs shows that i have XT1093 model. what happens i do not understand. i know exactly i have XT1095 Model
i have now stock 6.0 Android system, and it shows that i have XT1095, but on another 2 roms 7.1.1 i saw that there was written XT1093
gioyocho said:
Hey all. I have XT1095 model. when i rooted, twrped and unlocked bootloader, then install 7.1.1 rom, about phone and cpu programs shows that i have XT1093 model. what happens i do not understand. i know exactly i have XT1095 Model
i have now stock 6.0 Android system, and it shows that i have XT1095, but on another 2 roms 7.1.1 i saw that there was written XT1093
Click to expand...
Click to collapse
I believe the CM/Lineage base does this. My phone says the same. It doesn't have any negative impacts, it doesn't really matter. Some ROMs also just show "Moto X (2014)" instead of XT1095.
Thanks for reply, yes i hope it is "roms" problem
I wouldn't think about a "ROM problem".
In this case, those ROMs were built from an specific version of MOTO X (2014) as a base, but since all versions al likely the same phone, ROM covers them all... but it has get a name, so Developers chose which one.
Otherwise we would have exactly the same ROM for XT1093/95/97, and that's uinnecessary.
If you want, you could edit it from your phone itself... If I'm not wrong, that line were name was added can be changed from bouild.prop.
my friends have xt1095 and it writes same, only for my phone is there xt1093 written. i hope there is no changing bands, because xt1095 has 4g in my country, xt1093 does not have
Related
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) that I can boot into fastboot with, and that's it. Does anybody know where the stock Firmware files are for this device? The host I was using had them yanked down.
trevorftard said:
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) that I can boot into fastboot with, and that's it. Does anybody know where the stock Firmware files are for this device? The host I was using had them yanked down.
Click to expand...
Click to collapse
{UPDATE}
I have located another source for the firmware files here: https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
They must be requested, but they'll give them to you after making you wait.
trevorftard said:
I have a soft-bricked Moto X XT1055-DE (GSM Developer Edition) ...
Click to expand...
Click to collapse
Is this a typo? I believe that the GSM developer edition is XT1053...
jhedfors said:
Is this a typo? I believe that the GSM developer edition is XT1053...
Click to expand...
Click to collapse
No, it's not. The idiots at Moto Care seemed to want to brick my phone. They told me THAT was the model number, but now I know better.
trevorftard said:
No, it's not. The idiots at Moto Care seemed to want to brick my phone. They told me THAT was the model number, but now I know better.
Click to expand...
Click to collapse
I think there is an XT1053 and XT1055 GSM Dev Edition.
Btw, the GSM Dev image that you can download from the motorola link above is for the XT1053, I don't know if you noticed from the file name.
But I believe the hardware of all Moto X models is the same, it's just the software that's different. I'm running the XT1053 image on my XT1058 and it works fine.
mschumacher69 said:
I think there is an XT1053 and XT1055 GSM Dev Edition.
Btw, the GSM Dev image that you can download from the motorola link above is for the XT1053, I don't know if you noticed from the file name.
But I believe the hardware of all Moto X models is the same, it's just the software that's different. I'm running the XT1053 image on my XT1058 and it works fine.
Click to expand...
Click to collapse
XT1055 is US Cellular. GSM Dev & T Mobile are the same model number.
RenSoAbrupt said:
XT1055 is US Cellular. GSM Dev & T Mobile are the same model number.
Click to expand...
Click to collapse
https://motorola-global-portal.custhelp.com/app/software-upgrade-news/g_id/1949/action/auth
Select OTHER CARRIER OR RETAIL, you would see a Moto X - DE (XT1055).
This suggests that there is an XT1055 DE as well...
Thanks for your help. I noticed after taking my Moto X out of the case that the model number is glazed on the bottom. It is, in fact, the XT1053.
trevorftard said:
Thanks for your help. I noticed after taking my Moto X out of the case that the model number is glazed on the bottom. It is, in fact, the XT1053.
Click to expand...
Click to collapse
So what made u think it's an XT1055?
Good ol' Moto Care told me it was.
Sent from my XT1053 using xda app-developers app
moto x
hi guys ,who can telle if moto xt1055 can work on gsm ???please ,in my country i can use olnly gsm,tnx befor
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
Have you tried unlocking your bootloader? It seems to me the Telus version is pretty much a Pure Edition, except for the model number... BTW does it have any TELUS bloatware at all?
FYI I believe the 1095 has different frequency bands.
Sent from my Moto X
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
As far as bloatware, the only thing Telus installed on this phone is their "My Account" app. It's an app that you can download from the play store.
It's interesting to see the marketing used on Telus' website to describe the Moto X. The catchphrases are: "Pure Style, Pure performance" and then "Pure Android with the quickest updates". It leads me to believe that Telus will pretty much push out updates as they recieve them from Moto.
I'll be less inclined to root and flash if I see that I get timely updates, after using galaxy phones and flashing for the past 5 years i just want something that works great or of the box.
Regards,
Jeremie
johnny grep said:
Have you tried unlocking your bootloader? It seems to me the Telus version is pretty much a Pure Edition, except for the model number... BTW does it have any TELUS bloatware at all?
FYI I believe the 1095 has different frequency bands.
Sent from my Moto X
Click to expand...
Click to collapse
Jercote said:
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
As far as bloatware, the only thing Telus installed on this phone is their "My Account" app. It's an app that you can download from the play store.
It's interesting to see the marketing used on Telus' website to describe the Moto X. The catchphrases are: "Pure Style, Pure performance" and then "Pure Android with the quickest updates". It leads me to believe that Telus will pretty much push out updates as they recieve them from Moto.
I'll be less inclined to root and flash if I see that I get timely updates, after using galaxy phones and flashing for the past 5 years i just want something that works great or of the box.
Regards,
Jeremie
Click to expand...
Click to collapse
I have a brazilian version, also model XT1097 from carrier Vivo and I was able to unlock the bootloader and root it normally. Would like to know the difference between the XT1095 and XT1097 though.
Jercote said:
I have not because as far as i understood the method was exclusively for the xt1095 but I'll give it a shot.
Click to expand...
Click to collapse
I have XT1093 (US Cellular). The Pure Edition root method works for all variants with unlockable bootloaders. The key is to follow the directions completely. As it only BOOTS the system image rather than INSTALLS the image, it works fine. Boots the image once, installs SU to your system, then reboots to your system.
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
hey, I was thinking of getting a Moto X, and was wondering, is the one sold at Telus 16 or 32 GB?
oxxshadow said:
hey, I was thinking of getting a Moto X, and was wondering, is the one sold at Telus 16 or 32 GB?
Click to expand...
Click to collapse
Only the 16GB
I thought I was getting a Pure Edition when I bought the unlocked version from Motorola's mexican website, but I got the xt1097... if this is possible that would be great as I believe the pure edition will get updates faster
Could anybody supply the modem for the Telus xt1097? I converted my phone and forgot to backup the modem.
plasticdarlow said:
Could anybody supply the modem for the Telus xt1097? I converted my phone and forgot to backup the modem.
Click to expand...
Click to collapse
I have the xt1097, if you can help me do it I will send you the modem for it.
Jercote said:
I have a Telus XT1097. I know that without having a root method atm it is still just speculation but are we aware of any hardware differences or other issues that would make a convert to pure edition (xt1095) impossible?
Thanks in advance!
Jeremie
Click to expand...
Click to collapse
Methodikull said:
I have the xt1097, if you can help me do it I will send you the modem for it.
Click to expand...
Click to collapse
Sure thing,
I used the multitool to flash that Pure Edition Moto X 2014 (XT1095) ROM (full wipe)
Then flashed ATT Modem (downloaded from graffixnyc website)
Then sidloaded OTA update
Then restored my EFS from my TWRP backup.
Everything booted up fine, except I don't have a cell signal. It asks me for a SIM network unlock PIN. I'm stuck here.... I want to try and flash the telus modem. Not sure why it's asking for a SIM unlock PIN.
I mean how can I back up the modem file for you
Sent from my XT1097 using XDA Free mobile app
Methodikull said:
I mean how can I back up the modem file for you
Sent from my XT1097 using XDA Free mobile app
Click to expand...
Click to collapse
not exactly sure how
---------- Post added at 05:05 PM ---------- Previous post was at 04:27 PM ----------
UPDATE:
I flashed the modem from the multitool and I have Data again.
338lm said:
Official factory image is now available from Motorola! https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
Click to expand...
Click to collapse
Give it a try now!
It was asking you for unlocking cuz Att modem is sim locked.
So did you manage to successfully convert to 1095? I'd like to try, but I'm a bit worried about the modem issues, I'd need a sim unlocked modem i can use with Brazilian operators.
I'm a noob in moto x developing, so I'm already reading what multitool is and how-to's.
Moto X (2nd Gen) XT-1097
Samsung Galaxy Note 10.1 (2012) N-8000
Sent from the XDA mobile app.
plasticdarlow said:
Sure thing,
I used the multitool to flash that Pure Edition Moto X 2014 (XT1095) ROM (full wipe)
Then flashed ATT Modem (downloaded from graffixnyc website)
Then sidloaded OTA update
Then restored my EFS from my TWRP backup.
Everything booted up fine, except I don't have a cell signal. It asks me for a SIM network unlock PIN. I'm stuck here.... I want to try and flash the telus modem. Not sure why it's asking for a SIM unlock PIN.
Click to expand...
Click to collapse
Any luck getting your phone working? You have an XT1097 right?
Hey guys,
Telus XT1097 user here.
Trying to flash back to stock so I can get some lollipop action.
Which factory image should I be installing here ? I don't think our phones are dev editions / pure editions...
Thanks !
Here is everything you need guys.
http://www.techtastic.nl/android/motorola/installeer-android-5-0-lollipop-op-de-moto-x-xt1092/
It's in Dutch but gives you step by step instructions how to backup your modem and restore it using dd commands. A google translate should suffice.
I have a 1097, but i haven't done anything yet, i don't wanna mess up my brand new phone LOL
i'm reading about the changes to 1095 and mostly the modem issue.
floepie said:
Here is everything you need guys.
http://www.techtastic.nl/android/motorola/installeer-android-5-0-lollipop-op-de-moto-x-xt1092/
It's in Dutch but gives you step by step instructions how to backup your modem and restore it using dd commands. A google translate should suffice.
Click to expand...
Click to collapse
I wonder if that only works on some XT1097 phones, I got a "Permission Denied" error when I tried it on mine.
i found a moto X developer and will this work on the att network and i hope someone can help me out?
GSM/GPRS/EDGE 850/900/1800/1900 (Quadband) UMTS 850/900/1900/2100
According to this page: http://en.wikipedia.org/wiki/Moto_X#Variants
The Moto X model XT-1053 is the unlocked Developer Edition phone and does work on AT&T. The bands area also listed there.
thank for the help.
So i have to download the moto X developer image for att right?
perlsyntax said:
thank for the help.
So i have to download the moto X developer image for att right?
Click to expand...
Click to collapse
Yes that appears to be correct. I do not have a Developer Edition, but there is only one set of images for Verizon, which does have a DE device available. The firmware is the same, to my understanding, but the bootloader is able to be unlocked officially via the Motorola website.
Here are the firmwares you'll want. Ensure that if you pick one, you can only go UP in version, not down. So verify which version is on the phone first. You can only flash that version or a higher version (upgrading) but cannot downgrade to an older version. That will cause problems.
http://sbf.droid-developers.org/phone.php?device=0
Edit
Nemosfate said:
You want one of these UNLESS you're on 4.4.4 then you'll have to get it from Motorola.
I have the xt1053 developers edition and it works just fine on at&t , that's what I'm using
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
What about the XT1060DEV is this the Verzion phone or the gsm one?
perlsyntax said:
What about the XT1060DEV is this the Verzion phone or the gsm one?
Click to expand...
Click to collapse
XT1060 is the model for Verizon.
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Nemosfate said:
Google what bands it uses. Then compare to what at&t uses. I've seen in here people using it on tmo Idk about at&t. As far as which version to mix with your phone I'll bow out to someone with more experience with that
Edit: and next time you post make sure you put what MODEL phone you have and the software version. Would've saved some time possibly.
root, roms, and themes.. oh my!
Click to expand...
Click to collapse
Sorry about that.I hear the samething it work with t-mobile.
No problem.. And I know there's a thread somewhere with this info in it.. So a search and see if you can find it.. Good luck
root, roms, and themes.. oh my!
ive been searching all over the internet. i just found one guide but its too complex . can anyone tell me the steps to convert xt1096 to xt1095 stock. im on 5.1 and i dont care about losing cdma
iamtalha said:
ive been searching all over the internet. i just found one guide but its too complex . can anyone tell me the steps to convert xt1096 to xt1095 stock. im on 5.1 and i dont care about losing cdma
Click to expand...
Click to collapse
The guide is there to make it easy. It has the steps to follow to correctly convert it. If you find it too complex then you probably should not be doing it anyway.
Sent from my XT1095 using Tapatalk
ahan so can anyone send me the links to the firmwares of xt1096 and 95 ?
and yeah is there anyone who has converted his xt1096? people say it gets bricked as soon as you upgrade to 5.0 OTA
I had xt1096. Flashed through twrp stock 6.0 xt1095 from the android development section and it converted my phone to xt1095 automatically.
I am on GSM technology and everything works fine about 2 weeks by now.
Just make sure you have root and twrp and you're good.
thanks bro can u send me the links to the stock rom and the twrp that worked for u?
Link to stock rom: http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3277874
And here is my guide to make twrp work for you: http://forum.xda-developers.com/moto-x-2014/general/news-official-unlock-bootloader-t3290194/post64790012#post64790012
After you flash 6.0 xt1095, if you want to root your phone use this: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
thanks bro. plus if u want to return to xt1096 stock . what would be the best way
iamtalha said:
thanks bro. plus if u want to return to xt1096 stock . what would be the best way
Click to expand...
Click to collapse
No problam man.
I don't know... I won't want to return to xt1096 verizon's stock.
On 5.1 verizon, antutu benchmark gave 36k while right now on stock 6.0 xt1095 I get 55k.
But I believe that flashing the stock xt1096 5.1 will solve your problem.
i had 47k on stock verizon
....
Mine gave over 63k running Verizon's stock ROM 5.1.1
OrenGazala said:
No problam man.
I don't know... I won't want to return to xt1096 verizon's stock.
On 5.1 verizon, antutu benchmark gave 36k while right now on stock 6.0 xt1095 I get 55k.
But I believe that flashing the stock xt1096 5.1 will solve your problem.
Click to expand...
Click to collapse
Well dude, that's actually weird because mine running 5.1.1 verizon' stock ROM gave 63445. I haven't tested the 6.0 of XT1095 but I will give it a shot, I will let you know what is gonna happen. Right bellow the text I leave a link with an screenshot of AnTuTu on my cellphone. https://drive.google.com/file/d/0B0CeuR2p1gW1T0QybzdXQXlOMGc/view?usp=drivesdk[/IMG]
---------- Post added at 01:38 AM ---------- Previous post was at 01:18 AM ----------
OrenGazala said:
No problam man.
I don't know... I won't want to return to xt1096 verizon's stock.
On 5.1 verizon, antutu benchmark gave 36k while right now on stock 6.0 xt1095 I get 55k.
But I believe that flashing the stock xt1096 5.1 will solve your problem.
Click to expand...
Click to collapse
Camilo_AnDev said:
Well dude, that's actually weird because mine running 5.1.1 verizon' stock ROM gave 63445. I haven't tested the 6.0 of XT1095 but I will give it a shot, I will let you know what is gonna happen. Right bellow the text I leave a link with an screenshot of AnTuTu on my cellphone. https://drive.google.com/file/d/0B0CeuR2p1gW1T0QybzdXQXlOMGc/view?usp=drivesdk[/IMG]
Click to expand...
Click to collapse
Hi!, so I purchased an XT1096 on eBay that's coming today so my questions are:
1. How I can unlock the bootloader?
2. Can I flash any rom any rom from other variants? (Like XT1093, 95) [I don't use Verizon so I don't really care if I lost the CDMA signal]
3. Can I use other variants firmware or just the Verizon one?
Thanks!
PoliceWho said:
Hi!, so I purchased an XT1096 on eBay that's coming today so my questions are:
1. How I can unlock the bootloader?
2. Can I flash any rom any rom from other variants? (Like XT1093, 95) [I don't use Verizon so I don't really care if I lost the CDMA signal]
3. Can I use other variants firmware or just the Verizon one?
Thanks!
Click to expand...
Click to collapse
The bootloader is easy. You can do it on the Motorola site (google the topic for specific directions). Then download and flash twrp recovery. I've been running Cyanogen for the most part. I wouldn't bother with other stock roms. Lineage will be out in a few weeks. There is also a Lineage build on 12-29 that is out there. I am running it now.
tj13 said:
The bootloader is easy. You can do it on the Motorola site (google the topic for specific directions). Then download and flash twrp recovery. I've been running Cyanogen for the most part. I wouldn't bother with other stock roms. Lineage will be out in a few weeks. There is also a Lineage build on 12-29 that is out there. I am running it now.
Click to expand...
Click to collapse
Thx for reply! Sadly the Moto come's with an broken mic so nobody can't hear me, I will return it to the seller and buy an Nexus 5! but I unlocked the bootloader and flash 7.1.1 and return it to stock hope the doesn't mind :silly:
i have an unlocked verizon moto x 2nd generation. can i get official motorola 6.0 update? is there any way?
thanks
im from pakistan so i wont be using verizon.
Which model do you have?
AT&T - XT1097
T-Mobile - XT1095
Verizon - XT1096
Check here: https://en.wikipedia.org/wiki/Moto_X_%282nd_generation%29
donslade said:
Which model do you have?
AT&T - XT1097
T-Mobile - XT1095
Verizon - XT1096
Check here: https://en.wikipedia.org/wiki/Moto_X_%282nd_generation%29
Click to expand...
Click to collapse
xt1096
??
akholicc said:
xt1096
Click to expand...
Click to collapse
Motorola and Verizon have stated that they will not update the XT1096 to MM or 6.x so there is no "official" Marshmallow firmware from Motorola for this phone.
You can find an 99% stock MM ROM here: http://forum.xda-developers.com/moto-x-2014/development/rom-xt1096-verizon-flashable-stock-rom-t3327345. Please read the full thread and ask questions there about this ROM. Some people - including me - are using it as their daily driver with little to no issues. This ROM has all the Motorola apps (Voice, Display, etc.) working as expected from a stock ROM.
Another option CM13. Read this thread :http://forum.xda-developers.com/moto-x-2014/orig-development/rom-official-cm-13-0-nightly-releases-t3256580/post65781867#post65781867. CM13 works on the XT1096 and other CM13-based ROMs should work but you will need to verify by reading their threads. Please be sure to read the full thread and ask questions there about CM13 or in the other threads related to other ROMs.
This is assuming that you are on the Verizon network and want to keep CDMA functionality. If you are using this phone on a GSM network and do not care to keep the CDMA access then you might want to look here: http://forum.xda-developers.com/moto-x-2014/general/guide-xt1097-to-xt1095-nextel-t2972693
All of the options above require that you have an unlocked bootloader. If your bootloader is locked please go here to learn about unlocking it: http://forum.xda-developers.com/moto-x-2014/general/motorola-unlocking-verizon-moto-x-2014-t3291104
Please read and learn as much as you can. Most - if not all - of your questions will be answered by reading through the threads listed.
XT1085
Hello everyone,
I'm currently using the moto X 2nd generation bought in china (XT1085) running android 5.0.2.
I would like to get rid of the retcn version of the system because I don't speak chinese for a retEU or retUS and install android 6 MM. Is it possible?
My phone is rooted and TWRP recovery installed
I tried to install this version : Version 6, because one guy wrote on the topic that it worked on TX1085 but it failed for me, and my phone stayed on the Motorola launching screen.
So now I'm back with the factory setup and would like to now how to install android 6.0?
Thanks
Read this thread: http://forum.xda-developers.com/showthread.php?t=2972693
kboya said:
Read this thread: http://forum.xda-developers.com/showthread.php?t=2972693
Click to expand...
Click to collapse
Yep I saw it but i've some trouble to download the file from the thread so i'm looking for an other solution
Edit : Ok I found a better link in the comments and did it, seems to work for now
How to unlock Motorola Moto X 2nd gen. bootloader?
Hey Guys! I have a locked motorola moto x 2nd gen, verizon variant (xt1096). I want to unlock its bootloader for upgrading to marshmallow (6.0), tried to unlock through Motorola's website, but my phone's not eligible for it. So is there any other way to unlock bootloader.