RR Rom help - LeEco Le 2 Questions & Answers

Guys i am on RR Rom-N-5.8.1 version official. I saw today that a new Update is available but i got no OTA on my phone and when i went inside the update settings to manually check for ota it says can't check update.
What to do?

I am unable to paste the link of the SS as it says i need atleast 10 posts to be able to do that

Get the zipped OTA flash via TWRP, if not then boot into TWRP; clear cache and dalvik cache manually and then try checking for updates

shivam321998 said:
Get the zipped OTA flash via TWRP, if not then boot into TWRP; clear cache and dalvik cache manually and then try checking for updates
Click to expand...
Click to collapse
I did the dalvik cache and cache clean but still unable to check for OTA.
It still says can't check for OTA's

Can you like do one thing? ask someone for the OTA status from this forum who's installed RR
if the reply is negative then the problem is at the other end else in the case of positive reply, dirty flash the newest rr build

shivam321998 said:
Can you like do one thing? ask someone for the OTA status from this forum who's installed RR
if the reply is negative then the problem is at the other end else in the case of positive reply, dirty flash the newest rr build
Click to expand...
Click to collapse
Okay thanks man

RR ROM v5.8.2 WiFi networks switch not working (error)on yu yureka plus how to solve this problem and same problem portable WiFi hotspot (error)

suresh kumar55 said:
RR ROM v5.8.2 WiFi networks switch not working (error)on yu yureka plus how to solve this problem and same problem portable WiFi hotspot (error)
Click to expand...
Click to collapse
This is le 2 section.Ask in yu yureka thread.

Related

[HELP] Bootloop with any Oreo Rom...

Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
I have the same problem?!
Nobody for help a desesperate newbie ..?
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Try full wipe, flash ROM ,gapps ,magisk and reboot.
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Try this!
-Your data and cache Partition must be in ext4 format.
-Enter in twrp recovery wipe Dalvik, system, data and cache Partition.
-reboot to recovery
-install just the ROM zip without gapps ir another addon
- reboot to system
If the boot is not sucessfull, reboot to twrp and wipe data Partition only.
-if the boot is sucessfull, reboot to twrp install gapps and reboot to system again.
After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot
Ps- this last boot takes a Little more time dont sorry
Hope i helped
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
Sr
---------- Post added at 06:07 AM ---------- Previous post was at 06:03 AM ----------
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Answered as below
S r
{
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
}
---------- Post added at 06:14 AM ---------- Previous post was at 06:07 AM ----------
newbie_or_not_newbie said:
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Click to expand...
Click to collapse
Here you go
once installation of new ROM and Gapps as well.
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, but it will take 5mins at least to login. All the best...
S r
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
newbie_or_not_newbie said:
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
Click to expand...
Click to collapse
In that case , in the last step, instead of swipe to factory reset, format only data Partition, and reboot!
Try that
If after the reboot , you are in bootloop, reboot again to twrp and format data Partition again!
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
newbie_or_not_newbie said:
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
Click to expand...
Click to collapse
Today, i flashed a new Oreo ROM! I passed all the difficulties that you already described! I remember that i read Somewhere in xda to remove sdcard and sim trata, on the last step (after flash ROM, boot, flash gapps boot, format data Partition, and then remove sim tray and boot again) . The boot occurs normally, 2-3 minutes later Google configuration wizard pops on screen. I think the problem is Oreo adjacent, or a encription problem! Don't know exactly...
Try to install micro gapps instead of pico apps
If the phone starts make your settings an go to Recovery.
Backup your data.
Make factory reset
Install rom
Now you can install pico gapps
Restore data
Restart
I have the same problem ,
with all of the oreo roms ,
if i do not flash the gapps phone does not bootloop
i tried pico/mini/nano gapps
Hi
So, do you think it could be ok if I flash micro or stock gapps ?
Like @sptepacate, if I don't flash gapps, the phone boots.
If I flash gapps then, the phone boots but google account bootloops...
Hurray !
I followed every step of @Speaker87, with extract of sim tray...
Now, I'm using AEX oreo 8.1 on santoni....
Thanks a lot for help !
Thank you , worked for me too for Nitrogen OS
Glad i could help!
Best way is :
- Wipe - Format data - type "yes" - ok.
- and then install newest TWRP
i've tried all the steps provided but i still get bootloop

Cannot mount /vendor

Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.
Hi, I want to
Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido
@Sajag I flashed recovery with twrp with treble support.
Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp
Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom
Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987
Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher
Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue
Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me
Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!

Mi 5 bootloop whenever installing android oreo based rom

So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
codearm2 said:
So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
Click to expand...
Click to collapse
-Format data
-wipe
-use otg drive since format data delete everything
-flash firmware newest 8.5.10 minimum requirment for oreo
-flash rom
-flash gapps
-reboot
evanlocked said:
-Format data
-wipe
-use otg drive since format data delete everything
-flash firmware newest 8.5.10 minimum requirment for oreo
-flash rom
-flash gapps
-reboot
Click to expand...
Click to collapse
tried it all, still bootloop
codearm2 said:
tried it all, still bootloop
Click to expand...
Click to collapse
flash any miui dev rom beyond 8.5.10 using miflash
reboot once ...
flash twrp ...
push any oreo rom (ie. LOS 15.1) and gapps while in recovery ...
Install that rom and gapps ...
reboot to twrp ...
format data ...
reboot again to twrp ...
reboot to system ...
3Dota said:
flash any miui dev rom beyond 8.5.10 using miflash
reboot once ...
flash twrp ...
push any oreo rom (ie. LOS 15.1) and gapps while in recovery ...
Install that rom and gapps ...
reboot to twrp ...
format data ...
reboot again to twrp ...
reboot to system ...
Click to expand...
Click to collapse
not working
Flashed 8.5.10 rom, ended in bootloop
flashed the LOS 15.1 and GAPPS, still bootloop
so, any one?
codearm2 said:
so, any one?
Click to expand...
Click to collapse
Your custom recovery needs to be an Oreo version compatible, so you can install oreo based roms on it.
Try to update to early version.
Regards.
codearm2 said:
So, I tried everything, flashed the ROM based on OREO like 9.6.1.0 ended in bootlooping the device, also custom rom based on OREO doesnt work too, like pixel experience, LINEAGE, ETC
Other than OREO based, ROM based on NOUGAT works well, like MIUI 8.xxx or RR based on NOUGAT
Any idea why this happens?
Click to expand...
Click to collapse
try updating firmware and twrp and flash lazy flasher zip after rom instalation hope it fix . *Lazy Flasher zip is must
Steffanom said:
Your custom recovery needs to be an Oreo version compatible, so you can install oreo based roms on it.
Try to update to early version.
Regards.
Click to expand...
Click to collapse
already 3.2.3 version which I believe supports oreo rom
Tsuzan said:
try updating firmware and twrp and flash lazy flasher zip after rom instalation hope it fix . *Lazy Flasher zip is must
Click to expand...
Click to collapse
didnt work, still bootloop
codearm2 said:
so, any one?
Click to expand...
Click to collapse
so ... what last rom boot fine in your Mi5?
3Dota said:
so ... what last rom boot fine in your Mi5?
Click to expand...
Click to collapse
any nougat rom works well
tried flashed 8.5.10 rom, still bootloop
codearm2 said:
any nougat rom works well
tried flashed 8.5.10 rom, still bootloop
Click to expand...
Click to collapse
this is quite weird ... since if you install any nougat ... you'll sure receive OTA update to oreo (dev or stable) ...
why dont you take that OTA?
3Dota said:
this is quite weird ... since if you install any nougat ... you'll sure receive OTA update to oreo (dev or stable) ...
why dont you take that OTA?
Click to expand...
Click to collapse
yes, installing the OTA based on OREO update also cause bootloop happens
basically, anything OREO based, whether it's ota or flashing it manually through TWRP, ZCX TWRP, or Mi Flash cause bootloop
Have you wipe your internal partition?
I think we need to wipe all partition after installing firmware when come from nougat to Oreo, because Oreo have new vendor partition.
At least you should use twrp-3.2.1-1-gemini
Sent from my MI 5 using Tapatalk
codearm2 said:
not working
Flashed 8.5.10 rom, ended in bootloop
flashed the LOS 15.1 and GAPPS, still bootloop
Click to expand...
Click to collapse
Try reflashing latest twrp via fastboot (not from within twrp).
After wiping all partitions (also mount and wipe vendor) and formatting data, reboot to recovery before flashing the ROM to access the data partition correctly again.
Then also try to boot (would go with a custom ROM) without any gapps, mods or root first, to further center the problem.
What happens now?
Have the same problem
Try to install latest build via fastboot --> failed
Try to install miui nougat based work, ota update to oreo based -->bootloop
Also try to flash all included internal storage but the problem still occured
Any miui nougat based and aex mod 5.1 work fine in my phone
Install lazy flasher before installing anything like SuperSU...
masruri03 said:
Have you wipe your internal partition?
I think we need to wipe all partition after installing firmware when come from nougat to Oreo, because Oreo have new vendor partition.
At least you should use twrp-3.2.1-1-gemini
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
already wiped, still not working
Phil_Smith said:
Try reflashing latest twrp via fastboot (not from within twrp).
After wiping all partitions (also mount and wipe vendor) and formatting data, reboot to recovery before flashing the ROM to access the data partition correctly again.
Then also try to boot (would go with a custom ROM) without any gapps, mods or root first, to further center the problem.
What happens now?
Click to expand...
Click to collapse
flashed latest twrp via fastboot, also already wiped all partition included mount and wipe vendor, also formated the data and reboot first before flashing the rom, boot without any gapps, still it doesnt work
reysack said:
Have the same problem
Try to install latest build via fastboot --> failed
Try to install miui nougat based work, ota update to oreo based -->bootloop
Also try to flash all included internal storage but the problem still occured
Any miui nougat based and aex mod 5.1 work fine in my phone
Click to expand...
Click to collapse
yeah, practically the same with mine
brhnahmad05 said:
Install lazy flasher before installing anything like SuperSU...
Click to expand...
Click to collapse
tried, doenst work
codearm2 said:
flashed latest twrp via fastboot, also already wiped all partition included mount and wipe vendor, also formated the data and reboot first before flashing the rom, boot without any gapps, still it doesnt work
Click to expand...
Click to collapse
Puh, don't know.
Do you have an old backup of your efs partition lying around?
If so, try restoring that.
If that also doesn't help, I'm through with my math here, I think...
Flash a Lineage OS 14.1 build without GApps but with a firmware that supports Oreo. Then, go to developer settings, turn on ADB and run adb devices on your computer so that the RSA Fingerprint pops up. There, make sure you tap on remember this computer and click ok.
Now, do an update to Lineage 15.1 without wiping anything. As soon as you reboot your phone, connect it to your PC and try to get a logcat. Paste the logcat here and we'll be able to see what's actually going on.

How to update Resurrection Remix OTA update on Mi A2?

I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you
dextercrypt said:
I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you
Click to expand...
Click to collapse
Whats this XDA noones replying to my thread
try from twrp
can you tell me how you installed the rom please, for reasons I do not know I can not install the rom on my phone
laviniu_c said:
try from twrp
Click to expand...
Click to collapse
I don't the TWRP method and I want to update through system updater.
ferk42 said:
can you tell me how you installed the rom please, for reasons I do not know I can not install the rom on my phone
Click to expand...
Click to collapse
Tell me where i cancontact you so I can tell you step by step . Or pm me in XDA. Whichever u like
Go to updater in setting and hit install button. First it will download the update and then update it.
But keep these things in mind.
1.After update is finished your Twrp will be gone if you had permanent twrp before.
2.All app permissions will he reset.
3.And updating through system update takes around 2-3 hrs(,may take more or less)
Abhishekshuklapolice said:
Go to updater in setting and hit install button. First it will download the update and then update it.
But keep these things in mind.
1.After update is finished your Twrp will be gone if you had permanent twrp before.
2.All app permissions will he reset.
3.And updating through system update takes around 2-3 hrs(,may take more or less)
Click to expand...
Click to collapse
So after updating, what should I do? And how to keep magisk too... ?? ( Bhai bata de where can I contact you about full procedure kyuki main bhi indian hu hun) ?
How to update OTA in RR
dextercrypt said:
I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you
Click to expand...
Click to collapse
Boot into TWRP
Wipe cache/Art and system partition
flash ota of RR and latest Gapps
Thats it :good:

[SHARE] Resurrection remix Android 10 for OnePlus 7 Pro Gaucamole is finally here!!!

Today i'm sharing you official Android Q Resurrection remix ROM for OnePlus 7 Pro.
I have flashed this rom on my op 7 pro and its running like butter.
Guide/steps to install this rom in your OnePlus 7 Pro
.
.
NOTE: THIS ROM IS ONLY FOR ONEPLUS 7 PRO. DON'T TRY THIS ROM IN OTHER DEVICE.
.
.
.
Here are the steps to install
1.First of all download oxygen os open beta 13 and rom resurrection remix android 10 rom for OnePlus 7 pro.
2.Boot into twrp flash Open Beta 13 then flash twrp then reboot into recovery. Again flash open beta 13 flash twrp.
3. After flashing open beta 13 on both slots (don't forget to flash twrp just after you flash open beta 13) Reboot into recovery again. Then Wipe data, format data.
4. Plug your phone into pc. Transfer all download Files to phone.
5. Flash Resurrection remix Android 10 Rom
6. Flash twrp (Don't flash magisk right now)
7. Again flash twrp
8. Reboot recovery again
9. After rebooting into recovery again flash Resurrection remix Android 10 Rom then again twrp flash
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
12. Then setup your device by normal formalities then boot into twrp flash magisk
Done.
(Note: Don't flash Or Download Gapps. Bcz its already included.
Current issue: Nothing.
This Rom is not mine. I just flashed it. And shared a small tutorial here for other OnePlus 7 Pro users.
Have fun.
Download link of resurrection remix Android 10 rom
https://get.resurrectionremix.com/?dir=ten/guacamole/
.
.
.
Credits
Special thanks to @varund7726 as the official dev of this ROM and the RR team @ www.resurrectionremix.com
.
Source
ROM: https://github.com/ResurrectionRemix
Kernel: https://github.com/ResurrectionRemix-Devices/android_kernel_oneplus_sm8150/
.
Wow..fantastic
Very nice..was waiting for
And one more thing to ask are u gujju?
punit1708 said:
Very nice..was waiting for
And one more thing to ask are u gujju?
Click to expand...
Click to collapse
nope. I am not gujrati. But i'm from Rajasthan
vimal suthar said:
nope. I am not gujrati. But i'm from Rajasthan
Click to expand...
Click to collapse
Ok.. bhai link is not there for download?
punit1708 said:
Ok.. bhai link is not there for download?
Click to expand...
Click to collapse
Link is already provided in the post.
Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
10. Again wipe data dalvik/cache then format data
11. Done. Just reboot your device normally (first boot may take 5-10 minutes)
Click to expand...
Click to collapse
I don't think the device will boot after formatting data partition!
How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work
JIMMMEHHHH said:
How come the flashing instructions require flashing Beta/RRR/TWRP so many times with so many reboots between? And formatting data etc after flashing?
Has anyone else had success with flashing the ROM as per OP instructions? Running OB13 just want to confirm the instructions work
Click to expand...
Click to collapse
I tried by myself bro. It is the only way to successfull flash.
Toutatis_ said:
Thanks for the heads up. Maybe the ROM will get a proper/official thread from the device maintainer.
FYI: You might want to edit or delete your first screenshot as it shows your phone and IMEI numbers.
I don't think the device will boot after formatting data partition!
Click to expand...
Click to collapse
I didn't said wipe system bro. Just format data and type YES that's it
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
Thanks for this, I thought the flashing instructions seemed convoluted.
scrin378 said:
Where is source code for rom??
This thread will be closed...read the rules for posting new thread on this forum...you must have link to source code of the rom...Its nice that you want to share that RR is out for OP7pro, but this is not a way to do that
you are not a developer of this rom, so you dont have permision to post it here..
And second, your flashing instruction are too confusing, i seriosly doubt that you must be on beta OOS to flash RR.
Click to expand...
Click to collapse
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop
vimal suthar said:
I don't care bro if they delete this post. I just wanted to share this and i did. And yes you have to on open beta 13 else you will get bootloop
Click to expand...
Click to collapse
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.
How is the vibration, brightness and fp speed?
Niki Exodia007 said:
You are wrong buddy.
1. I installed on top of the stable OOS.
2. No need of flashing the ROM 2 times, once is fine and no need to wipe data after flashing OOS.
3. if anyone is decrypted no need of formatting data, wiping data is fine.
Click to expand...
Click to collapse
Then you can go and have try brother. ?
vimal suthar said:
Then you can go and have try brother. ?
Click to expand...
Click to collapse
I am already using it.
Dbj.Dhaval said:
How is the vibration, brightness and fp speed?
Click to expand...
Click to collapse
All are working fine. But i felt that vibration is high. I mean vibration strength is much higher than Oxygen OS. This is only my opinion.
You know there's a section for this, its called Guides , NEWS and Discussion
just curious is the FP is gonna flicking the screen while unlocking? or is not because i don't really like the flicking screen during the unlocking process

Categories

Resources