Related
Disclaimer.
This is a largely untested alpha for a very expensive phone. I am not responsible for anything you do with it.
Information.
This is the initial release of HTC-Holiday-2.6.35-kx, a custom kernel for the HTC Vivid.
This is currently only for PirateGhosts's RumRaider Beta10, but may work with other versions of RR.
More information to follow.
Instructions.
If you don't know how to use this, you shouldn't be using it anyways. BUT....
1. Fastboot flash the boot.img
2. adb push the bcm4330.ko (WiFi module) to /system/lib/modules
Changelog.
001:
Snapdragon compile tweaks
Perflock disabled
Future Plans.
OC/UV
SPEED
Loopback?
Whatever
Download.
kx_kernel_001.zip - 3.53MB
Known Issues.
Kernel breaks camera
Instructions for porting to other ROMs.
Unpack the kx boot.img
Unpack the boot.img of the ROM you are porting to
Replace the ROM's zImage with the zImage from this kernel
Repack boot.img, flash with fastboot, and push the wifi module
This should, but is not guaranteed to work. Flash at your own risk.
I wish I knew more about this stuff, but unfortunately I don't and here comes a noob question:
Should the kernel not work properly or cause a boot loop etc...would I need to just re-flash the ROM from CWM? Also, will this still work with the Rogers HTC Raider?
So this is based on the Sense 3.5 kernel from Telstra? I guess it will work on any ROM based on this one, right?
Thank you so much!
Yesss
Can you add loop device support in the fuuttuureee!?
Sent from my HTC PH39100 using xda premium
Looks like I f'd the camera up... Can anyone confirm?
Updates tomorrow
Sent from my HTC PH39100 using xda premium
kxhawkins said:
Looks like I f'd the camera up... Can anyone confirm?
Updates tomorrow
Sent from my HTC PH39100 using xda premium
Click to expand...
Click to collapse
Yup camera is borked , had to pull the battery. Everything else seems to work fine tho.
finsilva said:
Should the kernel not work properly or cause a boot loop etc...would I need to just re-flash the ROM from CWM? Also, will this still work with the Rogers HTC Raider?
Click to expand...
Click to collapse
If something goes wrong, you should be able to just fastboot flash the original boot.img. It's always a good idea to make a nandroid / Titanium backup before flashing anything though.
vhjc said:
So this is based on the Sense 3.5 kernel from Telstra? I guess it will work on any ROM based on this one, right?
Click to expand...
Click to collapse
This is based on HTC's ATT Vivid sources, packed with the ramdisk from RumRaider 10. It should work with any ROM currently available, but would have to be repacked with the respective ramdisk. Read: This will not work out of the box for any ROM other than RumRaider.
MazinDLX said:
Can you add loop device support in the fuuttuureee!?
Click to expand...
Click to collapse
Please read OP; Loopback is planned.
User Error said:
Yup camera is borked , had to pull the battery. Everything else seems to work fine tho.
Click to expand...
Click to collapse
Thanks. Why'd you have to pull the battery?
kxhawkins said:
Thanks. Why'd you have to pull the battery?
Click to expand...
Click to collapse
it locked up while initializing the camera. tried it again just now and it was fine, aside from the camera not working part.
This is on hold until I can figure the overclocking on this out. I compiled Raider sources, and bananacake's kernel, and am unable to change clock speeds past 1.2GHz in SetCPU.
Hey, first I wanna say i'm new and from what i understood this thread isn't breaking any rules so I hope it's ok
I just flashed Semaphore Kernel and it really extended my phone's battery life... I wanted to try out devil kernel as well cause it looked good but I can't understand which version I need to download because there are so many on the site.. (HellyBean.com) I'm using CM 10 Stable on Galaxy S...
By the way is there any difference between Semaphore and Devil?
Thanks in advance
both are different type of kernel and you should try both to see which one better works for you....
erpurohit said:
both are different type of kernel and you should try both to see which one better works for you....
Click to expand...
Click to collapse
Thanks tho still remains my main question... which version of devil should i install? can't understand anything on hellybean.com
Blackherted said:
Thanks tho still remains my main question... which version of devil should i install? can't understand anything on hellybean.com
Click to expand...
Click to collapse
this version you need to flash
http://forum.xda-developers.com/showthread.php?t=1795274
erpurohit said:
this version you need to flash
http://forum.xda-developers.com/showthread.php?t=1795274
Click to expand...
Click to collapse
One last question before I'm flashing and I really appreciate you helping a noob
What is the difference between 1.75 and 1.81 or 1.95? why shouldn't I flash the newer ones? aren't they suppose to be better?
Thanks again!
Edit:
I got this one:
Devil3_1.7.5_Jelly_Helly_i9000_CFS_BLN_CMC_20121018.tar
and flashed it using Odin through download
and now it says in the settings Kernel Version: Unavailable
Blackherted said:
One last question before I'm flashing and I really appreciate you helping a noob
What is the difference between 1.75 and 1.81 or 1.95? why shouldn't I flash the newer ones? aren't they suppose to be better?
Thanks again!
Edit:
I got this one:
Devil3_1.7.5_Jelly_Helly_i9000_CFS_BLN_CMC_20121018.tar
and flashed it using Odin through download
and now it says in the settings Kernel Version: Unavailable
Click to expand...
Click to collapse
UP?
Download 1.95 and 1.81, try 1.95 first, if its not booting then flash 1.81 )))
Plus: download Devil Kernel Manager from Play Store (1st) then go to misc, set wifi to Stronger (if you are on charger) (+10m wifi range )))
Sent from my GT-I9000 using xda premium
Hey guys! Daniel here on my unlocked HTC one (dev addition)....
I have been having some issues with my camera, every custom kernel I have tried has made it be black, and unresponsive.
So far I have tried elementalX (The Kernel I hope to have work), and 2 other xda kernels, all with both camera fix on and off...
I have also tried this with the stock ROM, and CleanROM, with no change in effect~
Any ideas for diagnosing this issue?
Breadmen said:
Hey guys! Daniel here on my unlocked HTC one (dev addition)....
I have been having some issues with my camera, every custom kernel I have tried has made it be black, and unresponsive.
So far I have tried elementalX (The Kernel I hope to have work), and 2 other xda kernels, all with both camera fix on and off...
Any ideas for diagnosing this issue?
Click to expand...
Click to collapse
Have the SAME problem. Just put up a post asking for help too.... ill let you know if i hear anything, and hopefully vice versa
What firmware are you guys on? Camera fix is only required for 1.29 and up
Sent from my Tricked out HTC One
Squirrel1620 said:
What firmware are you guys on? Camera fix is only required for 1.29 and up
Sent from my Tricked out HTC One
Click to expand...
Click to collapse
I'm on 2.17. 401.1 - is this an issue?
I'm running Android revolution HD 10, but have not tried flashing elementalx yet.
There isn't even source code for 1.29 properly yet, never mind the new Android 4.2.2 I'd strongly recommend using the stock kernel until the source code is released for kernel devs
I'm surprised the only issue you're having is with camera tbh
MacHackz said:
There isn't even source code for 1.29 properly yet, never mind the new Android 4.2.2 I'd strongly recommend using the stock kernel until the source code is released for kernel devs
I'm surprised the only issue you're having is with camera tbh
Click to expand...
Click to collapse
Sounds good, with stock kernel is there any good 3dot menu replacement? Sadly android revolution 10 does not get rid of it (hint hint)
Breadmen said:
Sounds good, with stock kernel is there any good 3dot menu replacement? Sadly android revolution 10 does not get rid of it (hint hint)
Click to expand...
Click to collapse
Yes it does get rid of it check the mods part of aroma
MacHackz said:
Yes it does get rid of it check the mods part of aroma
Click to expand...
Click to collapse
Oh really! *scrambles for the power button*
So after having a lot of troubles with 4.3.x on this phone I decided to go back to 4.2.2 until 4.4 is finally stable for us;
Only problem is, whenever I flash any kind of 4.2.2 ROM, my phone decides to get stuck on "Obtaining IP Address..." when trying to log in to my Wi-Fi, while it works perfectly after flashing 4.3 again.
I also tried multiple different Kernels but no difference at all.
Anyone got any idea what might be causing this? I really want to go back to 4.2.2 since on 4.3 I get problems like my phone taking ages to wake up from stand-by or not waking up at all and having immense battery drain caused by wlan_rx_wake.
I'm thankful for any help.
Nutcake said:
So after having a lot of troubles with 4.3.x on this phone I decided to go back to 4.2.2 until 4.4 is finally stable for us;
Only problem is, whenever I flash any kind of 4.2.2 ROM, my phone decides to get stuck on "Obtaining IP Address..." when trying to log in to my Wi-Fi, while it works perfectly after flashing 4.3 again.
I also tried multiple different Kernels but no difference at all.
Anyone got any idea what might be causing this? I really want to go back to 4.2.2 since on 4.3 I get problems like my phone taking ages to wake up from stand-by or not waking up at all and having immense battery drain caused by wlan_rx_wake.
I'm thankful for any help.
Click to expand...
Click to collapse
dont know what rom you're using, but try a different one
Flying_Bear said:
dont know what rom you're using, but try a different one
Click to expand...
Click to collapse
As I've said, any 4.2.2 ROM I tried, which is about 5 different ones, has the same issue.
Nutcake said:
As I've said, any 4.2.2 ROM I tried, which is about 5 different ones, has the same issue.
Click to expand...
Click to collapse
sorry, misread ><
could it be a problem with your home network? can you try another network around you?
i had this issue with custom 4.1.2 roms such as zaiben, but haven't read that anyone had this issue on any 4.2.2 roms.
Some roms cant connect to the WEP networks (or other ones i forgot witch is exactly ) Try changing your network securiti.
Sent from my LG-P880 using Tapatalk
Flying_Bear said:
sorry, misread ><
could it be a problem with your home network? can you try another network around you?
i had this issue with custom 4.1.2 roms such as zaiben, but haven't read that anyone had this issue on any 4.2.2 roms.
Click to expand...
Click to collapse
Just tried a different AP but, sadly, no difference. :c
dimi89 said:
Some roms cant connect to the WEP networks (or other ones i forgot witch is exactly ) Try changing your network securiti.
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Both networks I tried connecting to were WPA2 with WEP disabled.
Hmmmm....Did you try liquidsmooth 4.2.2 rom maybe ? I ama asking for specific rom since i know it is 99% working.
Sent from my LG-P880 using Tapatalk
dimi89 said:
Hmmmm....Did you try liquidsmooth 4.2.2 rom maybe ? I ama asking for specific rom since i know it is 99% working.
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Liquidsmooth was actually the first one I tried, followed by XenonHD, CARBON, various CM 10.1 releases and ReVolt, all with the same issue.
For the love of God....Try MIUI 4.2.2 it is 5 min to flesh it and i am very curious what can couse this problem...BTW do you format / system before flashing new rom ?
Sent from my LG-P880 using Tapatalk
dimi89 said:
For the love of God....Try MIUI 4.2.2 it is 5 min to flesh it and i am very curious what can couse this problem...BTW do you format / system before flashing new rom ?
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Alright, I'll try MIUI, also I always format /data, cache and dalvik.
There is no option in my recovery to format system but it says it does that automatically, when flashing a new ROM
MIUI Download will take about 20 minutes since their servers severely cripple download speeds.
In CWM in mount and storage you have format /system idk what recovery you are using.
Sent from my LG-P880 using Tapatalk
dimi89 said:
In CWM in mount and storage you have format /system idk what recovery you are using.
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
Just tried that, didn't work.
Please do note that I greatly appreciate you trying to help me. <3
MIUI also fails at getting an IP address.
So problem must be with your rooter then.Can you restart it and change password ? BTW does your password contains only numbers or it also contains letters ? This is maybe strange but my sisters prone wont connect to our rooter if we set pass just numbers idk why.
Sent from my LG-P880 using Tapatalk
dimi89 said:
So problem must be with your rooter then.Can you restart it and change password ? BTW does your password contains only numbers or it also contains letters ? This is maybe strange but my sisters prone wont connect to our rooter if we set pass just numbers idk why.
Sent from my LG-P880 using Tapatalk
Click to expand...
Click to collapse
How can the problem be with my router when the same problem appears when connecting to a different AP, but also doesn't appear when I'm on 4.3?
I'm sorry but that makes absolutely no sense.
My password is letters and numbers.
Your best bet is most likely to re-stock and start all over again from scratch
flash a kdz, then flash a recovery, flash your desired ROM and then see what wifi will tell you
Also in general, re-stocking every now and then is not the worst idea, it can help to solve quite some problems
laufersteppenwolf said:
Your best bet is most likely to re-stock and start all over again from scratch
flash a kdz, then flash a recovery, flash your desired ROM and then see what wifi will tell you
Also in general, re-stocking every now and then is not the worst idea, it can help to solve quite some problems
Click to expand...
Click to collapse
Thanks, I'll try that; If it doesn't work I'll just have to go back to 4.3 and deal with the other problems.
Well something will work since it is not hardwer problem.I just reflashed mine slimbean rom to see if wifi is working and everything is fine...Tryed on liquid and now will flesh MIUI to check it too.
Sent from my LG-P880 using Tapatalk
Hello,
I have a serious problem here.
After rooting my device (Motorola xt862), Wifi is no more working, always "Error".
But when I've installed a costum ROM such as CM10, it's working again !!
I thing that the problem is related to Kernel or wifi drivers such as wl12xx in the Verizon original ROM.
I've tried to copy wifi drivers from CM10 to Verizon original ROM, but this has not work. I didn't find boardconfig.mk to apply some modifications... :crying:
I'm a beginer in android developpment, is any one can show me how to modify this? maybe a tiny tutorial?
Thank you so much
akardoud said:
Hello,
I have a serious problem here.
After rooting my device (Motorola xt862), Wifi is no more working, always "Error".
But when I've installed a costum ROM such as CM10, it's working again !!
I thing that the problem is related to Kernel or wifi drivers such as wl12xx in the Verizon original ROM.
I've tried to copy wifi drivers from CM10 to Verizon original ROM, but this has not work. I didn't find boardconfig.mk to apply some modifications... :crying:
I'm a beginer in android developpment, is any one can show me how to modify this? maybe a tiny tutorial?
Thank you so much
Click to expand...
Click to collapse
Most common wifi issue is rom is built for different kernel, did you downgrade from system version 906 to 890, so you could root?
sd_shadow said:
Most common wifi issue is rom is built for different kernel, did you downgrade from system version 906 to 890, so you could root?
Click to expand...
Click to collapse
Hi,
whether i flash D3G-55 (890) or D3G-66 (906) It dosent' work. Because they have the same kernel I think.
But with a CM it is working ( a different kernel version).
akardoud said:
Hi,
whether i flash D3G-55 (890) or D3G-66 (906) It dosent' work. Because they have the same kernel I think.
But with a CM it is working ( a different kernel version).
Click to expand...
Click to collapse
no
System Version___5.6.890.XT862________5.7.906.XT862
Kernel version____2.6.35.7-g790a33c_____2.6.35.7-g5fa4155
Build number____5.5.1_84_D3G_55_____5.5.1_84_D3G-66_M2-10
sd_shadow said:
no
System Version___5.6.890.XT862________5.7.906.XT862
Kernel version____2.6.35.7-g790a33c_____2.6.35.7-g5fa4155
Build number____5.5.1_84_D3G_55_____5.5.1_84_D3G-66_M2-10
Click to expand...
Click to collapse
Hi,
But the kernel version is the same: 2.6.35.7
I need another version but 2.6.35.7
akardoud said:
Hi,
But the kernel version is the same: 2.6.35.7
I need another version but 2.6.35.7
Click to expand...
Click to collapse
Stock works with kernel versions I posted, if it does not work for you, you're flashing it wrong.
Sent from my XT862 using Tapatalk
sd_shadow said:
Stock works with kernel versions I posted, if it does not work for you, you're flashing it wrong.
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
I've tested 906 and 860 but wifi is always shows Error.
I can root both of them. I've used One click flash, and also RSD. But no changes
Thank you any way.
akardoud said:
I've tested 906 and 860 but wifi is always shows Error.
I can root both of them. I've used One click flash, and also RSD. But no changes
Thank you any way.
Click to expand...
Click to collapse
once 906 is installed 890 will not flash complete
Have you verified the md5 for the 906 xml
sd_shadow said:
once 906 is installed 890 will not flash complete
Have you verified the md5 for the 906 xml
Click to expand...
Click to collapse
How may I do this?
akardoud said:
How may I do this?
Click to expand...
Click to collapse
see attached screenshot
download Blur_Version.5.7.906.XT862.Verizon.en.US from http://sbf.droid-developers.org/phone.php?device=15
VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml.zip =md5:8C33C373BD309AA40C8EBDB458E426F1
see https://sites.google.com/site/sdshadowscollection/home/hash-checksums
sd_shadow said:
see attached screenshot
download Blur_Version.5.7.906.XT862.Verizon.en.US from http://sbf.droid-developers.org/phone.php?device=15
VRZ_XT862_5.5.1_84_D3G-66_M2-10_1FF_01a.xml.zip =md5:8C33C373BD309AA40C8EBDB458E426F1
see https://sites.google.com/site/sdshadowscollection/home/hash-checksums
Click to expand...
Click to collapse
Yeh! I've downloaded the firmware from right here. It is the same firmware I've flashed.
akardoud said:
Yeh! I've downloaded the firmware from right here. It is the same firmware I've flashed.
Click to expand...
Click to collapse
Then you verify the MD5
Here is the solution http://forum.motofan.ru/index.php?showtopic=1739079&st=0&p=1784836&#entry1784836
Sorry for russion. I will try to translate it soon. For now you can use Google translate https://translate.google.com/transl...=0&p=1784836&#entry1784836&edit-text=&act=url