Hello friends, I have this problem: I have a r1 hd r0010uu, I had released it from the Amazon junction and I had changed the recovery and root. I made a hard rest and stayed brick, I tried to revive it with the instructions of ColtonDRG, mrmazak, rootjunkysdl and I could not. I use a .zip file with sptool and it comes out TOOL DL image FAIL! And try with the miraclebox and nothing. Friends need help. If they have a complicated .zip with sptool that works thank you very much
Related
I went through all the posts on bricking, did what others tried but to no avail. I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got the stock tar file, used a USB jig to get me into download mode, used Odin 3.7 to flash it, all went smooth but she still hangs on the Samsung logo. I've tried it 3 times, same results.
Do I need a Pit file?
Am I missing anything really obvious and important?
Should I flash a rooted stock tar since it's was rooted before I bricked it?
All the links on the 'Goodies' page for the Note are all dead links now so please don't refer me there.
Thanks for any help.
Fixed the problem
JessSayin said:
I went through all the posts on bricking, did what others tried but to no avail. I had CyanogenMod on it with TWRP and tried to do a restore (bad idea) that's when it bricked.
I got the stock tar file, used a USB jig to get me into download mode, used Odin 3.7 to flash it, all went smooth but she still hangs on the Samsung logo. I've tried it 3 times, same results.
Do I need a Pit file?
Am I missing anything really obvious and important?
Should I flash a rooted stock tar since it's was rooted before I bricked it?
All the links on the 'Goodies' page for the Note are all dead links now so please don't refer me there.
Thanks for any help.
Click to expand...
Click to collapse
Turns out the USB issue with Windows 7 Pro (64bit) was the problem. Got it all done on an XP computer I keep as a backup for this very reason.
Stock ICS is working great. No more B.S.O.D.'s Yay!
JessSayin said:
Turns out the USB issue with Windows 7 Pro (64bit) was the problem. Got it all done on an XP computer I keep as a backup for this very reason.
Stock ICS is working great. No more B.S.O.D.'s Yay!
Click to expand...
Click to collapse
nice work!
somebody somewhere sometime will find this thread and be very grateful!
c
I'm having the same problem. Trying to put my note back to stock. Now it is also stuck at the samsung logo during bootup. I can't get into recovery mode, tried installing 2 different stock roms and nothing. I have twrp, so I installed cwm to see if I can use that recovery and nope. The only thing I can do is go to download mode. I also tried doing all of this on an XP as I also did this first on Windows 7, and didn't work for me. Someone help please.
Exactly same issue
Hey
I'm having exactly the same issue, only difference I first tried this on Windows 8.1 64bit and then Windows 7 32bit - Still just getting the samsung circled logo on boot.
Did you ever find a solution ?
Should I not use Odin to flash a new ROM?
Help me!!
I'm having the same problem, note t879 lock in logo samsumg, did step by step through odin 2 STOCK ROMS (T879UVLG3, T879UVMA1), the process ends successfully, but the phone restarts and crashes in logo samsumg. anyone have any solutions? help me please
Hey guys,
I just got my Moto X and I was trying to factory reset my phone when I accidentally wiped my entire internal sd and the system. I lost the back up that I made earlier before wiping the device and I have no idea how to fix my device.
At the moment, whenever I boot the phone, all I can see is the image in the attachment below.
I cant connect to my usb therefore I cant put anything in my phone.
I tried using adb sideload in TWRP but it doesnt want to load.
I tried searching the threads of other people in xda who has bricked their phone but found no solution.
I really need help to revive the device to it's original condition.
Please help. :crying:
Merge
bqw371 said:
Merge
Click to expand...
Click to collapse
What do I merge?
1. Download correct sbf file for your phone from the following link.
http://sbf.droid-developers.org/phone.php?device=0
2. Download RSDLite (Google it)
3. Install USB driver for Motorola on your computer
4. Power Off your phone. Press Volume Down + Power button for 3 seconds. You will see boot loader screen
5. Flash your download file from step 1 with RSDLite.
6. Reboot when it is done.
Good Luck
Sent from my XT1053 using xda app-developers app
Solved
realdaniel1989 said:
Hey guys,
I just got my Moto X and I was trying to factory reset my phone when I accidentally wiped my entire internal sd and the system. I lost the back up that I made earlier before wiping the device and I have no idea how to fix my device.
At the moment, whenever I boot the phone, all I can see is the image in the attachment below.
I cant connect to my usb therefore I cant put anything in my phone.
I tried using adb sideload in TWRP but it doesnt want to load.
I tried searching the threads of other people in xda who has bricked their phone but found no solution.
I really need help to revive the device to it's original condition.
Please help. :crying:
Click to expand...
Click to collapse
Managed to solve the problem.
For the non connecting adb sideload install this -
http://www.androidpolice.com/2013/0...-driver-for-windows-that-actually-works-on-8/
And in order to return to stock or whatever rom then -
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Just jumping on saying that I had nearly the same problem in the last few days. and RSD fixed it. I lost my root (I was on 4.4., and flashed 4.4) but apart from that all is good.
emailrob said:
Just jumping on saying that I had nearly the same problem in the last few days. and RSD fixed it. I lost my root (I was on 4.4., and flashed 4.4) but apart from that all is good.
Click to expand...
Click to collapse
If your still on 4.4 just follow the slapmymoto thread. Write protection should still be off.
MOTO X
[email protected] said:
If your still on 4.4 just follow the slapmymoto thread. Write protection should still be off.
MOTO X
Click to expand...
Click to collapse
OK thank you. It seemed very convoluted (i.e. I had the chance of screwing up!)
Same problem
realdaniel1989 said:
Managed to solve the problem.
For the non connecting adb sideload install this -
http://www.androidpolice.com/2013/0...-driver-for-windows-that-actually-works-on-8/
And in order to return to stock or whatever rom then -
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Click to expand...
Click to collapse
hi,
I have the same problemm stuck on the warning screen. I have the correct firmware and the latestd drivers but still no luck.
Can you please elaborate what have you done?
FIxed Solution to Moto X soft brick issue ( SD card Wiped ).
Finally got solution for this soft brick issue.
I had same problem. I accedently wiped my whole sdcard while wiping through twrp.
lost all the files, backup n all. noting to restore !
The only thing left was TWRP on my screen.
N if i tried to reboot, it said "are you sure ? No OS installed" kind of thing. Because there wasnt !
After pulling out an all n8er reading all related posts & threads on XDA, finally i was able return to my stock firmware moto X xt1052 India (AsiaRetail) by following method. (Method applied for all moto X variants provided stock firmware is available)
Thanks to all the bros in this XDA thread
* [GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
*ZEDOMAX on youtube.
1.I think in the case of all sd wipe, only flashing any ROM will not work.
But anyway if you havent washed white & still stuck,
go on youtube & search for ZEDOMAX-How to Copy Files Over to your Android In a Bootloop with No OS using ADB!
you will get the video & right instructions. Very helpful.
2 Now if you are all wiped like me, Dont panic ! There is an option of flashing a stock firmware on your device.
Go to this XDA thread
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
RSD lite worked pretty good for me.
++NOTE++
1. If you are in TWRP recovery & trying to connect to RSD lite, it wont show your device.
Push power + vol up + vol down altogether for about 10 sec & let'em go.(It might stuck on BTLDR UNLKD screen, dont worry, do it again) &
You will enter in fastboot menu. RSD lite will recognize your device Now when you plug USB cable to your PC (After Installing all the drivers suggested in video), you can follow that video from thread to flash stock fmwr. RSD will now work fine.
2. Moto X toolkit is gr8, but not for xt1052. Dont go there.
3. You will get most of the StockFirmwares here. Specially for 1052 bros. I bet you wont find'em this easily anywhere else. !
* www filefactory com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25 *
(I am not allowed to post links yet ! place dot after www & b4 com )
XT1052_RETAIL-ASIA_4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml_2
is the SF i installed. & it was same as my original one. 624MB.
GoodLuck bros.
I hope it helps to soft bricked bros ending up here. Hit Thanks if it works & of course let me know if there is anything else.
Keep Calm & Return to StackFrmwr.:angel:
TheDNY said:
Finally got solution for this soft brick issue.
I had same problem. I accedently wiped my whole sdcard while wiping through twrp.
lost all the files, backup n all. noting to restore !
The only thing left was TWRP on my screen.
N if i tried to reboot, it said "are you sure ? No OS installed" kind of thing. Because there wasnt !
After pulling out an all n8er reading all related posts & threads on XDA, finally i was able return to my stock firmware moto X xt1052 India (AsiaRetail) by following method. (Method applied for all moto X variants provided stock firmware is available)
Thanks to all the bros in this XDA thread
* [GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
*ZEDOMAX on youtube.
1.I think in the case of all sd wipe, only flashing any ROM will not work.
But anyway if you havent washed white & still stuck,
go on youtube & search for ZEDOMAX-How to Copy Files Over to your Android In a Bootloop with No OS using ADB!
you will get the video & right instructions. Very helpful.
2 Now if you are all wiped like me, Dont panic ! There is an option of flashing a stock firmware on your device.
Go to this XDA thread
[GUIDE][VIDEO] Moto X - Return to 100% stock (using RSD Lite OR manual flash)
RSD lite worked pretty good for me.
++NOTE++
1. If you are in TWRP recovery & trying to connect to RSD lite, it wont show your device.
Push power + vol up + vol down altogether for about 10 sec & let'em go.(It might stuck on BTLDR UNLKD screen, dont worry, do it again) &
You will enter in fastboot menu. RSD lite will recognize your device Now when you plug USB cable to your PC (After Installing all the drivers suggested in video), you can follow that video from thread to flash stock fmwr. RSD will now work fine.
2. Moto X toolkit is gr8, but not for xt1052. Dont go there.
3. You will get most of the StockFirmwares here. Specially for 1052 bros. I bet you wont find'em this easily anywhere else. !
* www filefactory com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25 *
(I am not allowed to post links yet ! place dot after www & b4 com )
XT1052_RETAIL-ASIA_4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml_2
is the SF i installed. & it was same as my original one. 624MB.
GoodLuck bros.
I hope it helps to soft bricked bros ending up here. Hit Thanks if it works & of course let me know if there is anything else.
Keep Calm & Return to StackFrmwr.:angel:
Click to expand...
Click to collapse
You could also learn to flash the stock image files manually via mfastboot. Then you won't need a tool.
You are right man.
Travisdroidx2 said:
You could also learn to flash the stock image files manually via mfastboot. Then you won't need a tool.
Click to expand...
Click to collapse
Yes of course Senior Member. I am looking forward to that.
Flashing mannually via mfastboot using commands was also an option.
But i am too newbie to do that . I rooted phone & was flashing rom for first time ! Thats why wiped sdcard.
And RSD lite method seemed too easy.
Thanks anyway. I'll learn mfastboot method too.
It will be helpful if you can give me some link where it is well explained. I checked out few threads but didnt get exactly which file is flashed where in those 16-17 commands.
TheDNY said:
Yes of course Senior Member. I am looking forward to that.
Flashing mannually via mfastboot using commands was also an option.
But i am too newbie to do that . I rooted phone & was flashing rom for first time ! Thats why wiped sdcard.
And RSD lite method seemed too easy.
Thanks anyway. I'll learn mfastboot method too.
It will be helpful if you can give me some link where it is well explained. I checked out few threads but didnt get exactly which file is flashed where in those 16-17 commands.
Click to expand...
Click to collapse
Dude, I am not trying to be a jerk. However, the info is all over on how to return to stock. All you need to do is a search. Here you go. http://forum.xda-developers.com/moto-x/general/ref-complete-moto-x-guides-information-t2603358 if you look in that one of many threads on how to return to stock you will get instructions and the commands you can copy and paste so you don't have to type them. YouTube also is a great help. Bet you could find great tutorials on there also for a visual. Now with those commands I would leave out the fastboot OEM lock unless you want to relock your boot loader. I hope this helps. But a simple search would of found you all this.
http://forum.xda-developers.com/moto-x/moto-x-qa/help-moto-x-bricked-how-to-unbrick-t2996791
Moto X Restore and unbrick for any major US carri…: http://youtu.be/jhhktIkwi7Q
How To Factory Restore Your Moto X Using Fastboot!: http://youtu.be/ZtRSrQrzIPI
Help guys i'm i a real pinch,
im stuck on firmware upgrade error at startup and can only access download mode.
so i thought i should flash stock firmware following the steps in a thread by someone
but whenever i try to flash stock firmware via odin it gets stuck at Kernel part saying
NAND write start
i searched everywhere and come across the super brick but it is very complicated and i am a newbie.
and i cant really tell the difference between a soft brick and hard brick.
Any help would be appreciated. Thanks
blaspheme000 said:
Help guys i'm i a real pinch,
im stuck on firmware upgrade error at startup and can only access download mode.
so i thought i should flash stock firmware following the steps in a thread by someone
but whenever i try to flash stock firmware via odin it gets stuck at Kernel part saying
NAND write start
i searched everywhere and come across the super brick but it is very complicated and i am a newbie.
and i cant really tell the difference between a soft brick and hard brick.
Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Try With Other Versions of odin
try with other usb ports
try with other usb cables
try flashing various roms
uninstall kies if installed
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Install vcom drivers properly.also i recommend win7 for spft
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Did you get it solved?
Try
Zwackelmann said:
Hi
I hard bricked the Lenovo K3 Note. Right now it does not react at all. It just has a black screen. It does not seem to load and the pc is not reconicing it. Any help?
What i did is install TWRP
After that i installed the custom ROM K3_NOTE_MM_6.0_1613_v18_ROW_GOOGLE_CUOCO92.zip via TWRP (i am a new user so i cant provide links :crying: )
That did work out fine. But then my brother decided he didnt like the version so i said lets install K3_NOTE_5.1_1604_STABLE_ROW_004_CUOCO92
After downloading the zip file I started the flash in TWRP and i think he finished the flash and asked me to boot the system what i did. But after that the phone was just dead. The battery was low below 15% that might have been the problem.
Is there anything i can do?
So far i have tried flashing via fastboot but the pc doesnt seem to find the device and tried to get a new row running via SP_flash_tool but i cant figure it out and its basically the same problem i think
please send help
Click to expand...
Click to collapse
Make sure you have proper drivers installed
can you help me too, with my lenovo a7000 plus ? thanks
Hi there! I have an Amazon Blu R1 HD phone hard bricked after flash TWRP backup. I've tried to resolve this but without success. When trying flash with SPFT i get a S_BROM_DOWNLOAD_DA_FAIL 2004 error (view attached img) besides vcom port up and down every 2 secs.
Can anyone help me with this?
Thanks in advance!!
What backup did you flash. When you say hard brick, what does phone do?
Lots of people have different definition of brick.
Cause if was a TWRP backup, means phone has been unlocked, so maybe fastboot is an option for repair.
As for flash tool not connect, this mode has been disabled by manufacturer.
I did some hacking and changed preloader on some phones to make them work with flash tool, but it was a process with high risk of hard brick.
Hi. I've used 2016-07-25-BLU_R0010UU_V6.4_Full-Stock-Nandroid.zip backup downloaded from rootjunkysdl.com . My phone is black screen. Don't turn on. Just pvcom port up and down every 2 secs. I've tried to flash it using TWRP, but the process hanged up before finish.
I have tried repeatedly to flash roms after that. With SPFT, Miracle thunder, but nothing. Always the same. The port is up and down every 2 seconds. I thought about using test point, but have not managed to get it to work. Attached photo of motherboard . If you can help me, I would appreciate it.
Thanks in advance.
I wish that guy would take down his backup. Yours is not the first to be bricked from it.
Do not k ow how to force test point, sorry.
Thanks at all.....