Hi everyone
Yesterday i want to flash a Stock rom but odin was stuck at system.img and now nothing worked i try to flash again and nothing worked tested a few other usb slots another odin nothing worked...
On the tab is the message " An error has occurred while updating the device software..."
Pleeaasee Hellpp
Sry for the english
Brandlinga said:
Hi everyone
Yesterday i want to flash a Stock rom but odin was stuck at system.img and now nothing worked i try to flash again and nothing worked tested a few other usb slots another odin nothing worked...
On the tab is the message " An error has occurred while updating the device software..."
Pleeaasee Hellpp
Sry for the english
Click to expand...
Click to collapse
Redownload the rom
Or use smart switch on your pc. Fast and easy.
Related
I bought ı9305 yesterday.(This is my first android device.I'm a noop.)Today I connect my phone to pc.Kies said there was an update would you like to update.I tried to update but it stucked.Then I removed the battery.I tried to turn on my phone and a message appeared ''firmware upgrade encountered an issue. please select recovery mode in kies and try again'' I tried emergency firmware recover tool on kies but ıt always stuck on %2
(sorry for my english if there is a mistake)
read the basics first, then flash a stock rom via Odin if stock is good enough for you
Glebun said:
read the basics first, then flash a stock rom via Odin if stock is good enough for you
Click to expand...
Click to collapse
where can ı download stock rom for my phone.(GT-I9305 international version) or actually which one on this side there are many PDAs and CSCs forms.are these important? or ı can flash any of them?
try which one works best for you
I tried rooting with the chainfire auto root thing and after the red android screen i got the green one again and its stuck,i tried taking out the battery a few times but its still not working.
Any help would be amazing.
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
JJEgan said:
Well search would help ..
You say you are stuck on download mode .
As in download mode does screen not move unable to boot to recovery unable to power off .
Read the CFauto root instructions in full
Click to expand...
Click to collapse
I did and didnt find anything helpfull for my situation.
Also tried to root again but again its stuck on downloading... do not turn off target screen.
Boot to download mode and it says as it should Downloading do not turn off .
You are now supposed to flash the firmware via odin .
You should flash your stock firmware to get the phone working .
Then read the basic faqs and guides before you flash anything as its pointless flashing without reading the basics .
Or take it to a service centre .
jje
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
grpl said:
Thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
grpl said:
thanks for the reply ill consider doing that
but before i try that i managed to get into recovery mode does that mean i can try something or should i try the odin flash thing?
Click to expand...
Click to collapse
read the basics ignorance is no excuse .
ashraf sharif said:
Clear data and cache then reboot you may not have to reflash the rom. if that doesnt work tha use odin to flash stock rom. good luck
Click to expand...
Click to collapse
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
grpl said:
I did that and yeah i think i need to reflash too since that stuff didnt work.
i think i cant find my stock firmware from what i checked they dont have my country but maybe thats not importent
Click to expand...
Click to collapse
Is there a way to know my version/pda since i have no idea what stock rom to download
Device model no. in recovery mode
Hi,
Sorry to ask a random question. I Have my device model no. as S3 I9305 when I go to download mode and in my phone settings I can see my device model as S3 I9305T. I have recently installed Australian official firmware(XSA version without any career bloatware) in my phone, which is the S3 I9305T. I found it weird to have two different model nos. in 2 different places. When I first bought this phone it was the Telstra version, which is S3 I9305T. After that I changed many firmwares and installed S3 I9305 version from optus and other country's S3 I9305 version as well. Could you please tell me why is that?? Is this because I once installed I9305 firmware once? If that's the reason, today I flashed I9305T official firmware again with Odin. Is there any way to reset the download mode as well?? Please reply. Thanks.
grpl said:
Is there a way to know my version/pda since i have no idea what stock rom to download
Click to expand...
Click to collapse
Not unless you know what it is or saved the original .
You can just pick a stock rom for your area/ network .
If you bothered to read the basics their would be no need for all this ratting about .
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
dogmatism said:
@JJEgan I need some help, Ive got device, with same problem (i9305)
the donwload mode (which it defult boots into) does not show any device infos (which normally shows on the upper left corner)
Ive tried flashing latest stock rom (4.3) it gives an error (NOT "error pit file partition" but error flashing. failed it does not go beyond sboot )
any help? I am looking for 3 or 4 part firmware for this model, so that I could flash with pit.
Click to expand...
Click to collapse
So you run odin in windows.
Boot your phone to download mode
Connect device and wait for confirmation of connection in odin.
And then you click pda and choose a stock firmware.
And click start.
@tissot Odin gives fail error as I stated before. Am going to try 3 part odin package ive downloaded,.
sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...
bager13 said:
sorry for bad english.
i tried to upgrade my mini via odin 4, i think i did somethink wrong now my phone problem is, odin is not see (adding) my mini except odin 3 vxxx, i tried to install europe rom (phone,pda,csc) but not worked, i tried to install recovery on odin 3 but not wroked again what can i do ??
by the way when i try to enter download mode on my phone at the screen writes ;
odin mode
product name gt-s5570i
custom bin down : no (0 counts)
current bin : samsung official
and when i try to enter recovery mode at the screen writes; appling multi csc and when i try to wipe data reset;
e:format volume: rfs format failed on /dev/stl11
please some one help me...
Click to expand...
Click to collapse
anyone ?
which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.
darkshadow1997 said:
which rom did you flash? also if you can enter download mode then reflash stock rom and one thing make sure the rom you downloaded was for s5570i not s5570.i think you might have installed a rom for s5570 on your s5570i.
Click to expand...
Click to collapse
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.
bager13 said:
i tried a lot of rom until friday, now when i try to install stock rom vith odin 3 vxxx , odin stops at writing start screen. i wan t to know this, why odin 4 can t see my phone, maybe it works with one package.
i installed via 307 but when odin finished and i started the phone at the screen writes can t mount data, rebooting and phone is stuck at opening screen.
Click to expand...
Click to collapse
Hmmmh... try reflashing stock ROM, then go to recovery mode. Then wipe data.
Hello everyone ! I have a samsung galaxy s3 mini i8190
I flash CM , but i didn't like it so i tried to install with odin the original firmware.
Problem: Bootloop (logo Samsung Galaxy S3 Mini reboot infinite loop)
I can't enter in Recovery Mode, only i can enter in Download Mode
I use ODIN to try to install CWM , but still don't work..
And i have another problem. When I click start (in odin) it stops at SetupConnection, but if I disconnect & reconnect (usb) it starts flashing.
Please, help me.
Try to flash stock recovery instead of CWM.
tys0n said:
Try to flash stock recovery instead of CWM.
Click to expand...
Click to collapse
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Vladdyak47 said:
"I use ODIN to try to install CWM , but still don't work.."
I said this in the thread. If i'm wrong, please correct me.
Click to expand...
Click to collapse
Yes you did, but I asked you to try with STOCK RECOVERY instead.
It's not always a part of the official firmware package.
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Vladdyak47 said:
Can you help me with the link? Flash with PDA, right? (select PDA files, connect the device and click start)
Which one is good? http://forum.xda-developers.com/showthread.php?t=2187295
P.S. : I resolved the problem with connection
P.S.2: In Download Mode i have "CUSTOM BINARY DOWNLOAD: YES (3 counts) :|
P.S.3: When i try to flash a original firmware, after device restart it's an android charging something
EDIT: Now i have a new problem: FIRMWARE UPDRAGE ENCOUNTERED AN ISSUE. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN
Click to expand...
Click to collapse
Download service firmware and solve all your problems
Then just flash whatever rom you'd like.
Thanks a lot tys0n ! My Phone works now!
Mine has the same problem! I flashed kernels and params as well!
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
Solved !!! Thank you very very much, for all of u.. Worked ... Finally i can enter recovery mode and turn on my s3 mini.. . thanks XDA n really sorry for my english
stenc55 said:
Your kernel is f****ed up. You need to find any rooted stock kernel, flash it with Odin and then flash CWM. You don't need whole ROM, only kernel. Happened to me a lot while I was still on SGS1.
As for connection problem, perhaps clearing all drivers from your win and reinstall them could help.
Click to expand...
Click to collapse
What if my device cant be recognised by my pc. Ive tried every pc/laptop I own with different OS. So basically I have a bootloop stuck phone with no recovery mode available and it doesnt connect to the pc. Is there any way to fix that? Or is the phone completely bricked and I cant do anything about it.
PS: I have tried installing latest samsung drivers on my pc but it still cant recognise the phone.
Have had this phone for 6 years and it was ****ing amazing. I missed this little guy and want to fix him just as a "souvenir" since it was my first ever smartphone.
Hi!
I have installed TWRP and CM13 on my S5 mini (G800F), but i got many bugs and restarts, so i decided to go back to Stock ROM, unfortunatelly i cannot do this.
When i open Odin and try to install STOCK Rom from samsungmobile everything is good, till the and, when i got:
Write finished (filed)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried on laptop and deskop using various USB port but everytime i get the same message.
And when i get the battery out and power on i get:
"firmware upgrade enountered an issue. Please select recoery mode in Kies and try again"
I tried to connet it with Kies in recovery odin mode but Kies does not recogenize it.
Then i need my phone so i decided to move back to CM this time i have installed the CM12, after using it, one day and having many restarst i tried one more to move to STOCK ROM. I downloaded the older verios of STOCK ROM then i had before. But i got the same messege.
Then someone tell mi to make full wipe, so using TWRP i done the full wipe, cache, data, system and internal storage/sd.
After wipeing internal storage i get only:
"firmware upgrade enountered an issue. Please select recoery mode in Kies and try again"
and cannot even install recovery via Odin any more, beacouse i get bugs ;/ ;/ ;/
as a result i cannot even use my phone with CM12/13.
1. Do You have any tips or solution of this problem?
2. How can I instal STOCK ROM or even CM?
3. Can I install the CM via Odin?
4. Do You have any other recovery for S5 mini G800F?
He there, sorry to hear you're having troubles with the phone. I experienced a similar problem and found that this worked:
Try and flash your stock firmware, when it fails, take out battery, put it back in and restart into recovery mode (stock recovery). From there, do a factory reset and wipe (not using Team Win Recovery Project, using the stock Recovery).
Now go back to odin and try flashing again.
Hope this helps...it worked for me.
Do this when error occurs after flashing stock firmware!
1. Flash stock firmware
2. Get error message
3. Remove battery and start in Recovery Mode
4. Flash hidden.img that you can extract of the stock file!
Quote from reddit.com:
If you've tried to flash firmware off of Sammobile, and had your heart stop when the flash fails, fear no longer.
To fix the soft brick:
Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
When the phone boots, the displayed image will be touchwiz teal, there will be a little android and GALAXY spelt above it. Don't freak out.
Give it a minute and it should boot.
Hi, jest i did happend after flashing a stock firmware, but fortunatelly now it work.
How do i manage to fix it? I do not know. I just tried to flash it with a stock firmware one more time, and than tried to flash TWRP recovery via Odin. It get a fail. But the phone got power on, and it works till now !!!!
What was the problem? I have read that if you have the other CSC than XEO and want to flash the ROM with XEO CSC on S5 mini this problem occurs on many phone. Espesially on that from UK, so mine was.
thanks!!
Kuba