I tried to flash my sprint galaxy tab with the firmware that allows you to make phone calls... now i realize that was not for sprint. is there anyway to get back to how i was before with 3g? i was able to load Zypher but that doesnt give me my 3g back. Please help!
Ever figure it out? I bricked mine too :'(
Find and flash an ODIN package that contains the original firmware plus the modem.bin for the radio. PM me if you need any further assistance.
do you guys have the sprint pit and rom?
I tried to do euro flash and get errors in recovery mode about not being able to mount e?
Bricked Sprint Tab!!!
Hey guys I'm a newbie myself but with a little bit of reading I was able to fix the bricked issue. Follow this link http://forum.xda-developers.com/showthread.php?t=869819 and the Sprint Stock Rom is here. One is with a modem and one is without. For those who are wanting to get back the 3g as it says in the link it uses the 4g epic dump. It looks like your out of luck. Because once you dump this modem there is no going back it's for good. So your better off sticking with the WiFi for now till one day a sprint modem is dumped. I'm also learning myself and also in the process in flashing this via Odin3. I to have bricked my tab lastnight just doing a factory reset. I was using the VooDoo with full CMW ! So just follow the instructions very carefully and you should get your tab working again.
Hi guys.
I just upgrade my tab from 2.2 to 2.3.3, after i update my tab i notice the network is on EDGE so i flash my tab with T-mobile stock modem since my tab was a T-moble hardware..but then after i successfully flash the modem and the internet surfing works fine, i couldn't make any calls or receive incoming calls..any problem with my update??
redd88 said:
Hi guys.
I just upgrade my tab from 2.2 to 2.3.3, after i update my tab i notice the network is on EDGE so i flash my tab with T-mobile stock modem since my tab was a T-moble hardware..but then after i successfully flash the modem and the internet surfing works fine, i couldn't make any calls or receive incoming calls..any problem with my update??
Click to expand...
Click to collapse
Hmmmm.... what is your location ? Did you flash a Euro-FW ? The fact your Tab showed being on EDGE-network is not bad, it just means you hadn't activated the data-link in setting-wireless-etc... E or G are the normal cell-bands.
Try to reflash your modem with a JMA,JPZ or JQ2 modem from the thread. Mind you, JQ2 will show up as JQ3 in settings these are the quadband/data-enabled modems working a charm here...
thhx i try it and let u know the outcome
I use RotoHammer Modem switch for 2G voice and 3G for high speed surf. It's much easier for me than flashing TMO's 2G-3G every time you want to use either one. TMO's 2G should be 12 megs and the 3G is 16 megs. I'm not sure why when I downloaded ROTO's switch both files have the same megs. Anyway, just a thought for all of us here.
Carrier: Appalachian Wireles
Model: SM-G925R6
Android Version: 5.0.2
Device Type: zeroltelra
CSC Code: LRA
Bootloader Version: G925R6WWU2A0F2
CSC Version: G925R6LRA2A0F2
I'm looking for a way to root if I can??
Edit: Also looking for any info about the bootloader to see if it's unlocked like the 900R6 was.
Sm-G925R6 Cellcom
I'm actually looking for a way to revert back to stock. My phone model is Sm-G925R6
Model number SM-G925RZWALRA
Cellphone provider is Cellcom in Wisconsin and use Verizon towers.
On the back of the phone imprinted under the glass the i.d is also sm-g925v as this specific model is similar to the verizon varient s6 edge
I purchased the phone thinking I could find the stock firmware somewhere and just use Odin to flash back.
The person that previously had the phone. Rooted the phone same method as the verizon galaxy s6 edge. I have twrp recovery and am running the CleanRom from the verizon s6 edge.
All verizon s6 edge roms work on the phone and I'm using Tmobile on the phone.
I want to revert back to stock but no firmwares if you do back up your stock firmware is there a way to share it ?
Check the back of your phone and see if the fcc id is SMG925V then the verizon method presumably work
The only thing on the back of my phone is Samsung & Galaxy S6 Edge.
I had the LRA version of the S5 and it took a bit but eventually the stock fw got released so I'm hoping this one will be the same..
Update: The sticker on the box says SMG925RZKEL
In the back of the phone towards the bottom of the phone towards the charger under where it says galaxy s6 edge. There should be really fine text. Small print.
Mine says SM-G925R6 Fcc ID A3LSMG925V
lmazon86 said:
In the back of the phone towards the bottom of the phone towards the charger under where it says galaxy s6 edge. There should be really fine text. Small print.
Mine says SM-G925R6 Fcc ID A3LSMG925V
Click to expand...
Click to collapse
There is no fine print on mine below galaxy s6 edge
@lamzon86
I got the stock firmware using this tool.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
This is the info I used from the Phone Info *SAMSUNG* app.
Model: SM-G900R6
Region: LRA
PDA: G925R6WWU2AOF2
CSC: G925R6LRA2AOF2
PHONE: G925R6WWU2AOF2
Morinzo said:
@lamzon86
I got the stock firmware using this tool.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
This is the info I used from the Phone Info *SAMSUNG* app.
Model: SM-G900R6
Region: LRA
PDA: G925R6WWU2AOF2
CSC: G925R6LRA2AOF2
PHONE: G925R6WWU2AOF2
After you enter the phone info hit the check update button, when it loads the fw info press the download button. After it downloads check the decrypt box and decrypt.
Click to expand...
Click to collapse
This was a bit helpful I checked out the tool but can't find firmware for my phone still.
I input the information you have and a firmware does come up. But I'm a bit confused for your model number you have Sm-g900R6 isn't that the galaxy s5?
Firmware given is for galaxy s5 isn't it ?
The regular galaxy s6 is Sm-G920 and the s6 edge is Sm-G925
lmazon86 said:
This was a bit helpful I checked out the tool but can't find firmware for my phone still.
I input the information you have and a firmware does come up. But I'm a bit confused for your model number you have Sm-g900R6 isn't that the galaxy s5?
Firmware given is for galaxy s5 isn't it ?
The regular galaxy s6 is Sm-G920 and the s6 edge is Sm-G925
Click to expand...
Click to collapse
@lmazon86
no i had a 900r6 before i got the 925r6.
Original SM-G925R6 Firmware
Carrier: Appalachian Wireles
Model: SM-G925R6
Android Version: 5.0.2
Device Type: zeroltelra
CSC Code: LRA
Bootloader Version: G925R6WWU2A0F2
CSC Version: G925R6LRA2A0F2
https://drive.google.com/file/d/0Bwna7hZykYnnZzJOVDI4X3I5b2c/view?usp=sharing
SM-G925R6 Stock Firmware
Morinzo said:
@lmazon86
no i had a 900r6 before i got the 925r6.
Original SM-G925R6 Firmware
Carrier: Appalachian Wireles
Model: SM-G925R6
Android Version: 5.0.2
Device Type: zeroltelra
CSC Code: LRA
Bootloader Version: G925R6WWU2A0F2
CSC Version: G925R6LRA2A0F2
https://drive.google.com/file/d/0Bwna7hZykYnnZzJOVDI4X3I5b2c/view?usp=sharing
Click to expand...
Click to collapse
Thanks for the help,
The firmware worked and i was able to return the phone back to stock and was able to set up Android pay.
The bad for me is that the original stock firmware doesnt allow me to change the APN settings so i can use my T-mobile sim
I do get data and it works normal with fast LTE speeds but unable to send text/calls.
I had to re-root the phone and went back to CleanRom so that i can use my T-mobile sim on the phone.
Thanks for all the help and helping me get back to stock.
The zip you uploaded does work and helps get back to stock on SM-G925R6
about root G925R6
lmazon86 said:
Thanks for the help,
The firmware worked and i was able to return the phone back to stock and was able to set up Android pay.
The bad for me is that the original stock firmware doesnt allow me to change the APN settings so i can use my T-mobile sim
I do get data and it works normal with fast LTE speeds but unable to send text/calls.
I had to re-root the phone and went back to CleanRom so that i can use my T-mobile sim on the phone.
Thanks for all the help and helping me get back to stock.
The zip you uploaded does work and helps get back to stock on SM-G925R6
Click to expand...
Click to collapse
Hello friend, I have the same problem with the G925R6 from cellcom variant of verizon.. How can I root this phone?
I would like to install the clean rom in this phone but Im unable to root I cant find a solution to root I tried pinpong root with no luck.. My android version is 5.0.2 and Baseband is G925R6WWU2AOF2..
Please help me! I will be very gratefull with you pleaseeee let me know how you root this model
saulpro08 said:
Hello friend, I have the same problem with the G925R6 from cellcom variant of verizon.. How can I root this phone?
I would like to install the clean rom in this phone but Im unable to root I cant find a solution to root I tried pinpong root with no luck.. My android version is 5.0.2 and Baseband is G925R6WWU2AOF2..
Please help me! I will be very gratefull with you pleaseeee let me know how you root this model
Click to expand...
Click to collapse
What is your kernel build date? If it is prior to may 15, use ping pong root
kernel
Snowby123 said:
What is your kernel build date? If it is prior to may 15, use ping pong root
Click to expand...
Click to collapse
Kernel build date is June 19.
How can I root it?
THANKS
saulpro08 said:
Kernel build date is June 19.
How can I root it?
THANKS
Click to expand...
Click to collapse
I am in the same situation as saulpro. I have the same cellcom phone with same kernal build date. I activated on Verizon but cannot send mms. I have a triangle above my network signal icon also.
Odin twrp unified one for all variants should be fine (will trigger knox), flash supersu done. If you are running Verizon you will likely need to flash a Verizon rom on it. Keep in mind that with this device Verizon unique features such as VoLTE will not work.
I don't own this phone nor do I plan to.. I owned previous lra Samsung Galaxy devices though and did development work with them.
So I was able to root, but that was all it did. Still couldn't send MMS. I had data and could call/text/receive mms.
I flashed a couple of different Verizon roms. A regular S6 allowed me to send MMS, but I lost data. I tried another couple for the S6 edge and lost data and MMS. All I can do now is text and call...
Ideas?
Currently downloading stock firmware for G925R6 and gonna start again.
breftayka said:
So I was able to root, but that was all it did. Still couldn't send MMS. I had data and could call/text/receive mms.
I flashed a couple of different Verizon roms. A regular S6 allowed me to send MMS, but I lost data. I tried another couple for the S6 edge and lost data and MMS. All I can do now is text and call...
Ideas?
Currently downloading stock firmware for G925R6 and gonna start again.
Click to expand...
Click to collapse
Make sure apn's are set properly.
Would it be the original apn settings or verizon? How can I change them? Other Roms let me but this one doesn't show anything.
root
How you root the phone?
breftayka said:
So I was able to root, but that was all it did. Still couldn't send MMS. I had data and could call/text/receive mms.
I flashed a couple of different Verizon roms. A regular S6 allowed me to send MMS, but I lost data. I tried another couple for the S6 edge and lost data and MMS. All I can do now is text and call...
Ideas?
Currently downloading stock firmware for G925R6 and gonna start again.
Click to expand...
Click to collapse
saulpro08 said:
How you root the phone?
Click to expand...
Click to collapse
Read 3 posts back, probably only option atm
TWRP for G925R6
evilryry said:
Odin twrp unified one for all variants should be fine.
Click to expand...
Click to collapse
Link or pointer to this? Can not figure out which TWRP version is 'unified'.
Thanks in advance.
I have a att g900a galaxy s5 but I am no longer on ATT netowrk any more. I have several issues with my phone, one is there is only a few gigs of free memory and I cant see these large files to make more room, I also have some corupted files. I would like to wipe this phone clean with a newer firmware. Currently the phone is unlocked on the t-mobile network. Thanks in advace for any and all help.
I've switched to AT&T and gave Verizon the boot. I've got phones that work on the AT&T LTE network perfectly but have this S6 Edge just sitting here.. if I swap the SIM I can get 4G LTE, but if I get a call or text it switches to that band, and never recovers the LTE ... Long story short. If I change the partitions using Odin (PIT file) and an AT&T official Odin rom from AT&T .. will I brick the device beyond recovery? Or is there something in here that will prevent this from even happening? I'm not new to Android or rooting but.. this is new for me.. I've used PIT files in the past but not like this. I'm guessing no matter what I do the bootloader will stop it but.. in theory will this work?
If you attempt to flash stock att on a vzw device you will brick yes. Should be recoverable as long as you can still access Odin and reflash stock vzw ROM onto your device
Sent from my SAMSUNG-SM-G925A using XDA-Developers mobile app