Hi while trying to transfer data with my usbc cable and Android*File*Transfer, but my p10 wasn't recognized i tried also Handshaker but not working for me. Anyone has any advice svp ?
You should enable USB Debugging in Developer Settings.
I got no problems with my P10 VTR-L09 with the file transfer on macOS Sierra.
Hi, thanks for your reply, i did it, but nothing, tried to reset usb authorization, but again not working :-s did i missed something?
Related
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
try changing the usb port
i've tried but didn't work
try reboot sometimes computers start on the whole unknown usb device
and the only cure is reboot
is the only solution?
it's possible is an hardware issue?
Re-install WIN 7
If rebooting too doesn't work then i recommend re-installing Win 7, it hardly takes half an hr..
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
i'd uninstall wmdc even search and remove any traces of it in regedit
of cause if you reinstalled win7 from scratch that should happen automaticly
or I would try connecting it to another computer to verify that the device connector was not damaged
it's possible is an hardware issue?
because the pc recognise my diamond with bluetooth
news
my pc recognize my diamond with bluetooth but for the usb port nothing...
i've tried to install a new rom version but nothing...
how i can install an original bootloader from internal storage?
as I said try connecting it to another computer xp with activesync or later with wmdc
anything
you don't need to sync or anything just detect it if works you could even use a public library computer if they are not too locked down
thats how you detect if the connector in the phone have been damaged
about doing it from Internal storage I'd suggest you check the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
maybe around the "Upgrading / cooking / flashing:" section
i think the usb connector on the phone is broken
the only solution is the assistance...but i have the hardSPL inside my phone!!!
Try it on another PC .
i've tried...but nothing
windows fault
This is actually a problem with windows.
I had the same issues but solved it by fiddling with the device manager. This is slightly more advanced than just plugging the phone in but it's not that hard.
Also you can check to see if this is really a problem with the phone. Try to connect the phone in disk mode (so it registers as a memory stick). If it shows up it means it really is windows having some issues detecting the device.
I have the same problem, but when the TD is in disk mode no problem at all
stronkyz said:
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
Click to expand...
Click to collapse
STEPS (on HTC TOUCH DIAMONF):
1. START
2. SETTINGS
3. CONNECTIONS (tab)
4. USB TO PC
5. UNCHECK "Enable advanced network functionality"
6. OK
Try now to connect your HTC with your PC (Win 7)
stronkyz said:
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
Click to expand...
Click to collapse
may be you could change diamond's rom
Hello everyone,
First of all, I'm sorry for my low level of english, I'll try to explain my problem correctly
I have an Htc One Mini 2 since few days and when I connect the phone on my computer, it's recognize as a "media device" and not as a USB storage. So, I can't transfert files, create folders etc.
I'll try to solve that by activating the debugging mode and updating my drivers but it doesn't work
Do you know how to proceed?
Thank you for your help :fingers-crossed:
steve-arc said:
Hello everyone,
First of all, I'm sorry for my low level of english, I'll try to explain my problem correctly
I have an Htc One Mini 2 since few days and when I connect the phone on my computer, it's recognize as a "media device" and not as a USB storage. So, I can't transfert files, create folders etc.
I'll try to solve that by activating the debugging mode and updating my drivers but it doesn't work
Do you know how to proceed?
Thank you for your help :fingers-crossed:
Click to expand...
Click to collapse
first thing to do is go to your device manager and see if you have any device to be installed. You should have "Android USB Devices">"My HTC"
Are you in windows, Mac or Linux?
steve-arc said:
Hello everyone,
First of all, I'm sorry for my low level of english, I'll try to explain my problem correctly
I have an Htc One Mini 2 since few days and when I connect the phone on my computer, it's recognize as a "media device" and not as a USB storage. So, I can't transfert files, create folders etc.
I'll try to solve that by activating the debugging mode and updating my drivers but it doesn't work
Do you know how to proceed?
Thank you for your help :fingers-crossed:
Click to expand...
Click to collapse
Most android phones are connected as a "Media Device". Mostly because they use the MTP protocol. You can transfer files, I transfer them all the time. The phone will show up as "HTC One Mini 2" as a media device, open it up and you should be good to go
Hi All,
It just happened on my Moto X (Ghost). My computer cannot detect detect to transfer files via USB. I have already uninstalled and re-installed Motorola USB software.
I have tried different USB ports on my computer with different USB cables. Still no luck. If I choose "Photo Transfer (PTP)", it works.
Please help me.
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Hi suite works all annoyingly well for me. Dunno what's wrong on your end, buddy.
Annoyingly, because it always pings my desktop and opens whenever I connect to my PC.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Have same issue on two p20 pro, both brand new, and factory settings. Can't figure it out
CaptainKaracho said:
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Click to expand...
Click to collapse
Ill try that now
Edit: I have mpt checked, so i have no idea.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Turn off USB debugging.
Completely delete all drivers whilst not connected. In Windows click options show all devices, including hidden.
Install hisuite.
Next connect the phone then let it install.
Then disconnect and turn on USB debugging.
Let it install that too.
Can you see the device?
PS: there's only so many ways it can connect.
Nuking the driver then reconnecting afresh is the best way.
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
hexen88 said:
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Click to expand...
Click to collapse
Doesnt work
Sorted HiSuite P20 Pro back on running Fixed, Thank's
kingcapning said:
Doesnt work
Click to expand...
Click to collapse
### The only way it worked for me was after being connected to the PC and have opened the HiSuite THEN GO to the last step and it looks is the only way it changes for charging only. If you don't have either the PC connected and on the HiSuite program, it doesn't change at all. Check bellow on the ###.:good:
Well it worked for me any way Thank's hexen88
Quote:
Originally Posted by hexen88
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
### go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Also check your cable, some cables only allow charge only.
leighfwarren said:
Also check your cable, some cables only allow charge only.
Click to expand...
Click to collapse
It must of been a bug, once i updated to 9.0 it now connects fine and has done since updating.
If it still helps i think i got it.
Use the original huawei charging cable you got with the phone.
I tried it all.. tethering, debugging, hisuite etc.. but nothing worked
1. step Install HiSuite on computer,
2. step plug in your phone with original cable,
3. step HiSuite on computer will run by itself,
4. step select transfer files on your phone,
5. step computer will ask you if you all it to install HiSuite on your phone and click ok,
6. step on your phone pop up will show to install HiSuite on Huawei.
Maybe also go to settings - connections - usb thetering (if needed) and thick it.
Hope it helps, it did for me - but barley lost my mind...
Good luck,
Toni
Hi - For a long time, my OP3T worked fine when I would connect the USB to do file transfers.
However, for a few weeks now, USB File Transfer stopped working. on my home PC. I know that there must be some issue with my PC because USB File Transfer works fine with my Win10 work PC.
PTP transfer seems to work OK on the Home PC. When I look at the Other Devices >> Android in Win10 Device Manager, there is a exclamation point indicating a driver failure. I have tried installing/reinstalling the official OnePlus USB drivers, but no luck.
Can anyone help?
Thanks,
¿GJ?
Try this:
https://www.howtogeek.com/195607/ho...evice-to-show-up-in-file-explorer-if-it-isnt/
If that's no help try the Google USB Drivers:
https://developer.android.com/studio/run/win-usb