Database Develop

[REQUEST][RUU] HTC One Dual SIM 802d M7C_DWG

Hi All,
I have an Indian HTC One Dual SIM 802d M7C_DWG.
I'm looking for any RUU for the handset or any custom rom to flash with this model#.
Kindly help ...

Hi All,
Even i am looking for the same. tried to root my phone and now for some reason it keeps booting into the bootloader. i have cwm installed and i can even use it to install a rom. but even after that it keeps booting into the bootloader.
PLEASE HELP !!
The RUU can save me !

Please help!!
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.

initeshx said:
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
Click to expand...
Click to collapse
Have a same problem like you
Who can help me or explain to me?

hoangps said:
Have a same problem like you
Who can help me or explain to me?
Click to expand...
Click to collapse
initeshx said:
I have a HTC One 802d (m7c_dwg) indian dual sim version..
I have messed it up pretty much.
I am new to XDA forum. Maybe I am not able to search well.
However, when my phone was working perfectly fine and stock it was:
version: 0.5
version-bootloader: 2.27.0000
version-baseband: 1.01.32.0917
version-cpld: None
version-microp: None
version-main: 2.23.720.2
version-misc: PVT SHIP S-ON
product: m7cdwg
platform: HBOOT-8064
modelid: PN0751000
cidnum: HTC__038
partition-layout: Generic
security: on
build-mode: SHIP
hbootpreupdate: 11
gencheckpt: 0
After this I have made a terrible mistake.
I went S-OFF and flashed this RUU. The onl;y RUU.exe i could find.
ruu_m7c_dwg_jb_50_htccn_chs_ct_1.12.1401.1_radio_1 237.17.18.0423release_signed
This has changed my hboot, software no., radio everything and i am not able to get any signal on my phone.
After this i upgraded the firmware to
OTA_M7C_DWG_JB_50_S1_HTCCN_CHS_CT_2.40.1401.1-2.36.1401.1_release_339188zxf4sldwhr7k7cw8
MY condition now is:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.27.0000
(bootloader) version-baseband: 2.03.30.1025
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.40.1401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT382MP00013
(bootloader) imei: 357607050351635
(bootloader) meid: A1000037A614ED
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4120mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b78ee36f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Still of no help. I am not getting any signal even now. Whenever i try to get back to stock via installing Nandroid backup i created when it was stock. It flashes well.
But as soon as it boots. It reboots after few seconds and keeps rebooting like that.
I dont know now what to do. I have tried flashing soul ROMs, still the same issue.
It boots up but i dont see anything on the screen, just the battery icon and no signal. it again reboots.
PLEASE HELP ME WITH THIS. I DONT KNOW WHAT TO DO NOW.
If you can post HTC One 802d indian official firmware package, it will be of great great help.!
Also, Please tell me how i can get back to S-ON as i will have to visit service center, i suppose.
Please Help!!
(I am sort of a noob, please don't mind if i sound dumb)
THANK YOU FOR YOUR HELP IN ADVANCE.
Click to expand...
Click to collapse
tushar_316 said:
Hi All,
Even i am looking for the same. tried to root my phone and now for some reason it keeps booting into the bootloader. i have cwm installed and i can even use it to install a rom. but even after that it keeps booting into the bootloader.
PLEASE HELP !!
The RUU can save me !
Click to expand...
Click to collapse
ravinder0003 said:
Hi All,
I have an Indian HTC One Dual SIM 802d M7C_DWG.
I'm looking for any RUU for the handset or any custom rom to flash with this model#.
Kindly help ...
Click to expand...
Click to collapse
any one could restore his phone ,
anyone knows some one have the same phone so we can extract everything from it
MR.shwetkprabhat show me away to pull radio and system from another device ,
Maybe the phone need to be rooted to do this
connect yout phone with your computer and enter in your console on your computer:
1. adb shell
2. su -
3. cat /proc/emmc
now you see a list of your partitions, it looks similar to this
---------
dev: size erasesize name
mmcblk0p20: 000ffa00 00000200 "misc"
mmcblk0p37: 00fffe00 00000200 "recovery"
mmcblk0p36: 01000000 00000200 "boot"
mmcblk0p38: 93fffc00 00000200 "system"
mmcblk0p27: 00140200 00000200 "local"
mmcblk0p39: 17fffe00 00000200 "cache"
mmcblk0p40: 670000000 00000200 "userdata"
mmcblk0p23: 01400000 00000200 "devlog"
mmcblk0p25: 00040000 00000200 "pdata"
mmcblk0p28: 00010000 00000200 "extra"
mmcblk0p34: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p18: 00500000 00000200 "wcnss"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p21: 00400000 00000200 "modem_st1"
mmcblk0p22: 00400000 00000200 "modem_st2"
mmcblk0p30: 00040000 00000200 "skylink"
mmcblk0p31: 01900000 00000200 "carrier"
mmcblk0p29: 00100000 00000200 "cdma_record"
mmcblk0p19: 01affe00 00000200 "reserve_1"
mmcblk0p33: 034ffa00 00000200 "reserve_2"
mmcblk0p35: 05fffc00 00000200 "reserve_3"
mmcblk0p32: 04729a00 00000200 "reserve"
adb shell su -c "dd if=/dev/block/mmcblk0p37 of=/sdcard/recovery.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p36 of=/sdcard/boot.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p38 of=/sdcard/system.img bs=4096"
adb shell su -c "dd if=/dev/block/mmcblk0p34 of=/sdcard/radio.img bs=4096"
adb pull /sdcard/recovery.img
adb pull /sdcard/boot.img
adb pull /sdcard/system.img
adb pull /sdcard/radio.img
Please make sure the same block is used i know that your skills better than min please

i also have a bricked device
htc one dual 802d india bricked
info was
os 2.23.720.2
hboot 2.2700
now after flash with china rom its in boot loop
need ruu or stock rom for india ver cid 38
thanks

htc 802d india 720
is there any one who has this update zip file on memory or some were that can upload it here?
2.37.720.1 (316.38 MB) . is ota update and may be some one copy it from internal storage after download
maybe it help us to make our phone alive

Check this post: http://forum.xda-developers.com/showthread.php?t=2495697

J_M_V_S said:
Check this post: http://forum.xda-developers.com/showthread.php?t=2495697
Click to expand...
Click to collapse
i checked it be fore and i couldn't find that

hadi207 said:
i checked it be fore and i couldn't find that
Click to expand...
Click to collapse
Please check again, as there's a CWM backup of the version you're looking for.

J_M_V_S said:
Please check again, as there's a CWM backup of the version you're looking for.
Click to expand...
Click to collapse
i already downloaded that. but i need ota update 2.37.720.1 (316.38 MB) not cwm back up

hadi207 said:
i already downloaded that. but i need ota update 2.37.720.1 (316.38 MB) not cwm back up
Click to expand...
Click to collapse
Why do you specifically need OTA Update? As far as I can tell the CWM backup would do just the same...you can strip what you don't need from the Nandroid.

J_M_V_S said:
Why do you specifically need OTA Update? As far as I can tell the CWM backup would do just the same...you can strip what you don't need from the Nandroid.
Click to expand...
Click to collapse
i need OTA update because it contains adsp radio sbl qsc_radio.and cwm backup contains only boot recovery system .
thast s why i need OTA

hadi207 said:
i need OTA update because it contains adsp radio sbl qsc_radio.and cwm backup contains only boot recovery system .
thast s why i need OTA
Click to expand...
Click to collapse
Did you tried latest 802w radio extracted from 2.41 Rusia? >> http://forum.xda-developers.com/showpost.php?p=49939788&postcount=172

J_M_V_S said:
Did you tried latest 802w radio extracted from 2.41 Rusia? >> http://forum.xda-developers.com/showpost.php?p=49939788&postcount=172
Click to expand...
Click to collapse
yes and same situation .base band unknown and imei 000000000000 and phone keep restarting

hadi207 said:
yes and same situation .base band unknown and imei 000000000000 and phone keep restarting
Click to expand...
Click to collapse
Have you tried downloading again? Sometimes a bad download can do that. Also, did you tried other radios (even for a different model)?

check this bro,, may be it will help tou http://forum.xda-developers.com/showthread.php?t=2617159&nocache=1

there is no stock ruu for htc 802d dual sim indian model
modelid: PN0751000
cidnum: HTC__038
if anyone hv link for full stock ruu.exe pls upload

[Q] Reset my htc one to stock rom and receive ota updates again

hi guyz
I have an htc one m7
it is relocked, tampered and rooted
i wanna unroot , lock it again and iintall a stock rom to receive the OTA updates again
any body can help me plz

mayyasov said:
hi guyz
I have an htc one m7
it is relocked, tampered and rooted
i wanna unroot , lock it again and iintall a stock rom to receive the OTA updates again
any body can help me plz
Click to expand...
Click to collapse
You need to provide more info about your phone
Please post a fastboot getvar all removing your serial no and imei

stovie_steve said:
You need to provide more info about your phone
Please post a fastboot getvar all removing your serial no and imei
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main: 5.11.401.110
version-misc: PVT SHIP S-ON
serialno: ************7
imei: *******************3
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 4226mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-e47fb74b
hbootpreupdate: 11
gencheckpt: 0

mayyasov said:
version: 0.5
version-bootloader: 1.57.0000
version-baseband: 4T.27.3218.14
version-cpld: None
version-microp: None
version-main: 5.11.401.110
version-misc: PVT SHIP S-ON
serialno: ************7
imei: *******************3
meid: 00000000000000
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__J15
battery-status: good
battery-voltage: 4226mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-e47fb74b
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
This will do it >> https://www.androidfilehost.com/?fid=23501681358543706
Flash with TWRP 2.6.3.3 and during install choose yes to install stock recovery / radio and no to root

clsA said:
This will do it >> https://www.androidfilehost.com/?fid=23501681358543706
Flash with TWRP 2.6.3.3 and during install choose yes to install stock recovery / radio and no to root
Click to expand...
Click to collapse
not sure that will work on M7_U (PN0711000)

nkk71 said:
not sure that will work on M7_U (PN0711000)
Click to expand...
Click to collapse
Really ?
why is this
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
Different than this ?
modelid: PN0711000
cid: HTC__001
HTC__J15
HTC__A48
HTC__M27
Click to expand...
Click to collapse
They both use the x.xx.401.x RUU

clsA said:
Really ?
why is this
Different than this ?
They both use the x.xx.401.x RUU
Click to expand...
Click to collapse
oh the ROM will work fine, just not the OTAs, due to different MID
the M7_U rom will have a different fingerprint ID, so it will download the M7_UL OTA, but will get a "variant system error" (or whatever it's called).
even if you check the OTA updater script (below is one for an m7_ul) it will fail the MID assert:
Code:
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/m7/m7:4.1.2/JZO54K/162357.7:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/m7/m7:4.1.2/JZO54K/177101.12:user/release-keys");
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__E11" ,
"HTC__102" , "HTC__203" , "HTC__405" , "HTC__Y13" , "HTC__304" ,
"HTC__032" , "HTC__A07" , "HTC__J15" , "HTC__016") == "t");
);
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
[B][COLOR="Red"] assert(check_mid("full", "PN0710000") == "t");,
assert(check_mid("simple", "PN0710000") == "t");
[/COLOR][/B] );

nkk71 said:
oh the ROM will work fine, just not the OTAs, due to different MID
the M7_U rom will have a different fingerprint ID, so it will download the M7_UL OTA, but will get a "variant system error" (or whatever it's called).
even if you check the OTA updater script (below is one for an m7_ul) it will fail the MID assert:
Code:
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/m7/m7:4.1.2/JZO54K/162357.7:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "htc_europe/m7/m7:4.1.2/JZO54K/177101.12:user/release-keys");
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
assert(check_cid(getprop("ro.cid"), "00000000" , "11111111" ,
"22222222" , "33333333" , "44444444" , "55555555" , "66666666" ,
"77777777" , "88888888" , "99999999" , "HTC__001" , "HTC__E11" ,
"HTC__102" , "HTC__203" , "HTC__405" , "HTC__Y13" , "HTC__304" ,
"HTC__032" , "HTC__A07" , "HTC__J15" , "HTC__016") == "t");
);
ifelse( is_ship_bootloader(getprop("ro.bootloader")) == "t" ,
[B][COLOR="Red"] assert(check_mid("full", "PN0710000") == "t");,
assert(check_mid("simple", "PN0710000") == "t");
[/COLOR][/B] );
Click to expand...
Click to collapse
I guess the question is can it be fixed or is their something else he can use ?

clsA said:
I guess the question is can it be fixed or is their something else he can use ?
Click to expand...
Click to collapse
this nand backup here is the M7_U version of 5.11.401.110

Hello there, I'd also like to go back to HTC Sense from my current Google Edition. Can you please tell me what to flash? It is a German Htc One.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *****3543
(bootloader) imei: *****3236
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

OdlG26 said:
Hello there, I'd also like to go back to HTC Sense from my current Google Edition. Can you please tell me what to flash? It is a German Htc One.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: *****3543
(bootloader) imei: *****3236
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
You have s-off, you can use any M7_U or M7_UL ruu you want. I guess it was a x.xx.401.x variant before, hard to tell without knowing your original cid. You can change your cid to HTC__001 and use a x.xx.401.x ruu for PN0710000 (not PN0711000) and cid HTC__001

Thank you for the answer! These are the old values:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So I can just change the IDs with one if the AiO Tools and then flash a RUU? I've not been messing with my phone since back then so I forgot some of the steps
Edit: According to this site http://www.htc1guru.com/downloads/ruu-zip-downloads/ i had a 207-version before, not the international 401. Can I still just flash a 401? All I want is a phone without a branding and that receives OTAs. I am sorry for my stupid questions, just want to make sure before screwing anything

OdlG26 said:
Thank you for the answer! These are the old values:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.206.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4291mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
So I can just change the IDs with one if the AiO Tools and then flash a RUU? I've not been messing with my phone since back then so I forgot some of the steps
Edit: According to this site http://www.htc1guru.com/downloads/ruu-zip-downloads/ i had a 207-version before, not the international 401. Can I still just flash a 401? All I want is a phone without a branding and that receives OTAs. I am sorry for my stupid questions, just want to make sure before screwing anything
Click to expand...
Click to collapse
yes you can. just make sure your CID and MID match the RUU you want to use, if not, change them to the correct value. If using a .401 ruu then all you need to do is to change your cid to HTC__001 using fastboot and flash the .401 ruu.

Thank you for the great help! After changing my CID with Squabbi's Toolkit 3.2 in fastboot mode, can I just execute this RUU Exe?
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Almost sounds a little bit too easy By the way how do I connect my phone to install the RUU via an executable? Fastboot? Download-Mode? Or just booted up normally?
Thank you so much, you're being very helpful!

OdlG26 said:
Thank you for the great help! After changing my CID with Squabbi's Toolkit 3.2 in fastboot mode, can I just execute this RUU Exe?
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Almost sounds a little bit too easy By the way how do I connect my phone to install the RUU via an executable? Fastboot? Download-Mode? Or just booted up normally?
Thank you so much, you're being very helpful!
Click to expand...
Click to collapse
Use this ruu.zip instead: https://www.androidfilehost.com/?fid=95784891001609959. Download and save it in the same folder where you have adb and fastboot installed. rename it ruu (ruu.zip)
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
and don't use toolkits, work directly from the command prompt.
Btw if you want fast answer, quote me.

ahh, my memories are coming back that's how I flashed the google version, too. Thank you. I will give it a try now I'll edit this post and say whether everything went fine.
what is the CID command? fastboot oem writecid htc__001?
---------- Post added at 04:24 PM ---------- Previous post was at 04:07 PM ----------
alray said:
Use this ruu.zip instead: https://www.androidfilehost.com/?fid=95784891001609959. Download and save it in the same folder where you have adb and fastboot installed. rename it ruu (ruu.zip)
Code:
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip
fastboot reboot
and don't use toolkits, work directly from the command prompt.
Btw if you want fast answer, quote me.
Click to expand...
Click to collapse
Code:
c:\android>fastboot oem [B]readcid[/B]
...
(bootloader) cid: [B]htc__001[/B]
OKAY [ 0.020s]
finished. total time: 0.020s
c:\android>[B]fastboot oem rebootRUU[/B]
...
(bootloader) Start Verify: 0
OKAY [ 0.020s]
finished. total time: 0.020s
c:\android>[B]fastboot flash zip ruu.zip[/B]
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
c:\android>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
Seems like it doesn't work. Wrong file size? Or corrupt download?
Checked the MD5, file is okay. So it is probably really just too big.
Edit: Can I just try the exe? http://www.handy-faq.de/forum/htc_o...resammlung_ruus_otas_backups.html#post2567168
Code:
fastboot oem lock
Execute RUU.exe, follow Instructions
Code:
fastboot oem writesecureflag 3

OdlG26 said:
ahh, my memories are coming back that's how I flashed the google version, too. Thank you. I will give it a try now I'll edit this post and say whether everything went fine.
what is the CID command? fastboot oem writecid htc__001?
---------- Post added at 04:24 PM ---------- Previous post was at 04:07 PM ----------
Code:
c:\android>fastboot oem [B]readcid[/B]
...
(bootloader) cid: [B]htc__001[/B]
OKAY [ 0.020s]
finished. total time: 0.020s
c:\android>[B]fastboot oem rebootRUU[/B]
...
(bootloader) Start Verify: 0
OKAY [ 0.020s]
finished. total time: 0.020s
c:\android>[B]fastboot flash zip ruu.zip[/B]
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
c:\android>fastboot flash zip ruu.zip
target reported max download size of 1526722560 bytes
Invalid sparse file format at header magi
Seems like it doesn't work. Wrong file size? Or corrupt download?
Checked the MD5, file is okay. So it is probably really just too big.
Edit: Can I just try the exe? http://www.handy-faq.de/forum/htc_o...resammlung_ruus_otas_backups.html#post2567168
Code:
fastboot oem lock
Execute RUU.exe, follow Instructions
Code:
fastboot oem writesecureflag 3
Click to expand...
Click to collapse
Yes you can try the exe but you'll need to flash the firmware first.

alray said:
Yes you can try the exe but you'll need to flash the firmware first.
Click to expand...
Click to collapse
Do you mean a *.img file? What would I have to flash? I can't find a comment on that on the German forums I took the Exe-link from.
For Germans: http://www.handy-faq.de/forum/htc_o...c_one_stock_rom_wiederherstellen_via_ruu.html

OdlG26 said:
Do you mean a *.img file? What would I have to flash? I can't find a comment on that on the German forums I took the Exe-link from.
For Germans: http://www.handy-faq.de/forum/htc_o...c_one_stock_rom_wiederherstellen_via_ruu.html
Click to expand...
Click to collapse
no not an .img file, If using a 4.xx.xxx.x ruu.exe you'll first need to flash the firmware.zip of the same version number before using the ruu
You can try the ruu if you want but most ppl are getting stuck a 5% "checking headers" if they have not flashed the firmware first

alray said:
no not an .img file, If using a 4.xx.xxx.x ruu.exe you'll first need to flash the firmware.zip of the same version number before using the ruu
You can try the ruu if you want but most ppl are getting stuck a 5% "checking headers" if they have not flashed the firmware first
Click to expand...
Click to collapse
Ah okay. Well then the RUU Exe won't help of course. I tried it anyway and it couldn't establish a USB connection. So back to the ZIPs...
Can I instead download an older version, that is less than 1,5GB? Like this http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
I can update it via OTA after that anyway, right? I just wonder, why the phone won't accept the RUU from earlier. Maybe I have to update hboot from 1.54 to 1.56 first or so?

[Q] HTC One Corrupted Partition Table

Hello !
I own a HTC One and somehow I made the partitions corrupted. And so I am not able to mount /system /data and /cache. I am not even sure if the partitions exist. I tried to run cat /proc/emmc and the following was the result :
dev: size erasesize name
mmcblk0p0: 000ffa00 00000200 "misc"
mmcblk0p0: 00fffe00 00000200 "recovery"
mmcblk0p0: 01000000 00000200 "boot"
mmcblk0p0: 73fffc00 00000200 "system"
mmcblk0p0: 00140200 00000200 "local"
mmcblk0p0: 27fffe00 00000200 "cache"
mmcblk0p0: 680000000 00000200 "userdata"
mmcblk0p0: 01400000 00000200 "devlog"
mmcblk0p0: 00040000 00000200 "pdata"
mmcblk0p0: 00010000 00000200 "extra"
mmcblk0p0: 04b00200 00000200 "radio"
mmcblk0p0: 03c00400 00000200 "adsp"
mmcblk0p0: 00100000 00000200 "dsps"
mmcblk0p0: 007ffa00 00000200 "radio_config"
mmcblk0p0: 00400000 00000200 "modem_st1"
mmcblk0p0: 00400000 00000200 "modem_st2"
mmcblk0p0: 00100000 00000200 "cdma_record"
mmcblk0p0: 02000000 00000200 "reserve_1"
mmcblk0p0: 034ffa00 00000200 "reserve_2"
mmcblk0p0: 05fffc00 00000200 "reserve_3"
mmcblk0p0: 06069e00 00000200 "reserve"
mmcblk0p0: 00004000 00000200 "control"
Click to expand...
Click to collapse
The following is the output of fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH395W901346
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__332
(bootloader) battery-status: good
(bootloader) battery-voltage: 3766mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0b0efc32
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Once I tried to clear my cache memory and it got stuck in the middle. When I tried to reboot the device into recovery this error occured and I'm stuck since then
I tried the methods mentioned in this thread http://forum.xda-developers.com/show...2512105&page=3 But that doesn't seem to work for me for some reasons I'm not sure what. Any help would be much appreciated. Thanks in advance

why there is no HSDPA or HSDPA+ mode for Radio Mode connection on my HTC ONE M7 U Eur

why there is no HSDPA mode for Radio Mode connection
HELP- HELP PLEASE I NEED HELP
I'am a beginner user, i installed few days ago REVOLUTION HD 93.0
I want to connect with 3G++ HSPDA mode but i don't see it in setting radio mode
I dont know how to do ...
This is below the actual phone parameters
this is a HTC ONE M7 U EUROPE
The provider is TUNTEL from Tunisia
Many thanks to whom can help me
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4033mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
c:\fastboot>

kamelzouari said:
why there is no HSDPA mode for Radio Mode connection
HELP- HELP PLEASE I NEED HELP
I'am a beginner user, i installed few days ago REVOLUTION HD 93.0
I want to connect with 3G++ HSPDA mode but i don't see it in setting radio mode
I dont know how to do ...
This is below the actual phone parameters
this is a HTC ONE M7 U EUROPE
The provider is TUNTEL from Tunisia
Many thanks to whom can help me
c:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__J15
(bootloader) battery-status: good
(bootloader) battery-voltage: 4033mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
c:\fastboot>
Click to expand...
Click to collapse
HSDPA is esentialy 3g. If you have H in notification bar, that should be it. Measure your internet speed and see what results you get
dey tuuk ur juurbs

donkeykong1 said:
HSDPA is esentialy 3g. If you have H in notification bar, that should be it. Measure your internet speed and see what results you get
dey tuuk ur juurbs
Click to expand...
Click to collapse
thank you for your response.
when i tested speed before installing revolution hd ROM, i dad 16MO down with H signal HSDPA without LTE.
Now, after installation the ROM, I have GSM-WCDMA-LTE with H signal but only 2MO down all time.
I think that HSDPA and HSDPA+ is for 3G++ mode , but the RADIO is not well configurated in revolution HD ROM or some thing like that. I dont know really how update the radio to get the maximum speed rate.
best regards

kamelzouari said:
thank you for your response.
when i tested speed before installing revolution hd ROM, i dad 16MO down with H signal HSDPA without LTE.
Now, after installation the ROM, I have GSM-WCDMA-LTE with H signal but only 2MO down all time.
I think that HSDPA and HSDPA+ is for 3G++ mode , but the RADIO is not well configurated in revolution HD ROM or some thing like that. I dont know really how update the radio to get the maximum speed rate.
best regards
Click to expand...
Click to collapse
Your problem is not with ARHD, you simply have a different phone. ARHD is made for UL version of M7, so radio is a bit different to allow 4g speeds. Sure, it will work with your phone too, but, as you already know, there will be some issues. Like you say - you have 4g (lte) option, but your radio simply doesn't support that kind of connection. I don't have any idea on how to increase your speed, except flashing a stock ROM for your phone, sorry
dey tuuk ur juurbs

donkeykong1 said:
Your problem is not with ARHD, you simply have a different phone. ARHD is made for UL version of M7, so radio is a bit different to allow 4g speeds. Sure, it will work with your phone too, but, as you already know, there will be some issues. Like you say - you have 4g (lte) option, but your radio simply doesn't support that kind of connection. I don't have any idea on how to increase your speed, except flashing a stock ROM for your phone, sorry
dey tuuk ur juurbs
Click to expand...
Click to collapse
thank you for your response.
effectively, my phone is U version radio.
what exactly the stok ROM file should I use, and where can I find it for downloading.
Best Regards;

Could not detect filesystem while flashing rom on htc one m7

Hello,
I wanted to flash CyanogenMod 14.1/Nougat 7.1 on my HTC ONE M7
and I forgot the nandroid backup. I also format all the partitions.
I tried the flash and it didn't work.
Now I'm stuck. The phone can only access fastboot and adb
(fastboot devices and adb devices respond well)
Since 10 days, I have followed and tried lot of forums and threads but the flash always failed with the same error message :
"Could not detect filesystem for /dev/block/platform/msm_ unmount of /system failed;
no such volume; patching system image unconditionally; Error executing updater binary in zip '/sdcard
HELP NEEDED PLEASE. Thank you all in advance and sorry for the bad english. I'm french
Here are some informations on the device :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.1020.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT343XXXXXXX
(bootloader) imei: 3544360XXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__247
(bootloader) battery-status: low
(bootloader) battery-voltage: 3455mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-52da1b55
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
"adb shell cat /proc/emmc" --->
mmcblk0p19: 000ffa00 00000200 "misc"
mmcblk0p34: 00fffe00 00000200 "recovery"
mmcblk0p33: 01000000 00000200 "boot"
mmcblk0p35: 73fffc00 00000200 "system"
mmcblk0p26: 00140200 00000200 "local"
mmcblk0p36: 27fffe00 00000200 "cache"
mmcblk0p37: 680000000 00000200 "userdata"
mmcblk0p22: 01400000 00000200 "devlog"
mmcblk0p24: 00040000 00000200 "pdata"
mmcblk0p27: 00010000 00000200 "extra"
mmcblk0p31: 04b00200 00000200 "radio"
mmcblk0p16: 03c00400 00000200 "adsp"
mmcblk0p15: 00100000 00000200 "dsps"
mmcblk0p17: 007ffa00 00000200 "radio_config"
mmcblk0p20: 00400000 00000200 "modem_st1"
mmcblk0p21: 00400000 00000200 "modem_st2"
mmcblk0p38: 01900000 00000200 "carrier"
mmcblk0p28: 00100000 00000200 "cdma_record"
mmcblk0p18: 02000000 00000200 "reserve_1"
mmcblk0p30: 034ffa00 00000200 "reserve_2"
mmcblk0p32: 05fffc00 00000200 "reserve_3"
mmcblk0p29: 06069e00 00000200 "reserve"
mmcblk0p25: 00004000 00000200 "control"

What kind of recovery do you use? maybe you use an older one that doesnt work with android 7 Roms. If so, update to latest version and try again.

saturday_night said:
What kind of recovery do you use? maybe you use an older one that doesnt work with android 7 Roms. If so, update to latest version and try again.
Click to expand...
Click to collapse
Thank you very much for your reply but I've already managed getting back the phone work.
I used the rom MaximusHD 3.0.0 which have a newer firmware than the main version of the phone. And it worked very well.
To do so, I had to flash (fastboot mode) the boot.img extracted from the zip first and then flashed the zip in recovery. It was a bit long but all working now.
Thank you again
EDIT : I don't know how to put this thread in SOLVED STATE.