Help me please my device is not turning on. - G 2014 Q&A, Help & Troubleshooting

I rooted Moto g2 2014 successfully and then I installed viper4android driver by flashing them using TWRP and installed v4a and turned off device. Now it's not turning on only I can see "Moto logo" powered by android. I also don't have backup of my current rom. Fully explained solutions will be highly appreciated as I'm new on this stuff. Thanks!/!

reflash

Reflash what?

kb47298 said:
I rooted Moto g2 2014 successfully and then I installed viper4android driver by flashing them using TWRP and installed v4a and turned off device. Now it's not turning on only I can see "Moto logo" powered by android. I also don't have backup of my current rom. Fully explained solutions will be highly appreciated as I'm new on this stuff. Thanks!/!
Click to expand...
Click to collapse
Install any custom ROM using twrp
In general development section you will find a lot of custom ROMs select anyone you like download it and flash it using twrp recovery.
To install download ROM and gapps and store them in your SD card than go to recovery by holding power on+volume down button bootloader will appear control it by volume up,buttons go to select recovery and than wipe system,data,cache and delvik cache now go to install select the ROM file swip to install after that flash gapps file and reboot.

vrkawin said:
reflash
Click to expand...
Click to collapse
I tried flashing some custom ROMs but still it's stucked on that Moto logo, not turning on, just screen is flashing.

Fahim X said:
Install any custom ROM using twrp
In general development section you will find a lot of custom ROMs select anyone you like download it and flash it using twrp recovery.
To install download ROM and gapps and store them in your SD card than go to recovery by holding power on+volume down button bootloader will appear control it by volume up,buttons go to select recovery and than wipe system,data,cache and delvik cache now go to install select the ROM file swip to install after that flash gapps file and reboot.
Click to expand...
Click to collapse
I tried flashing some custom ROMs but still it's stucked on that Moto logo, not turning on, just screen is flashing.

kb47298 said:
I tried flashing some custom ROMs but still it's stucked on that Moto logo, not turning on, just screen is flashing.
Click to expand...
Click to collapse
Are you wiping all.(system,data,cache and delvik cache)
If yes then try to flash your stock ROM.(Method given below)
https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682

Fahim X said:
Are you wiping all.(system,data,cache and delvik cache)
If yes then try to flash your stock ROM.(Method given below)
https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
Click to expand...
Click to collapse
Thanks for your support man, we did it. I got it back flashing stock ROM. ?

Related

[Q]who can me help with rom

on my tmobile note I was able to root it. and when I go into cwm and wipe everything then I try to install a rom, ive down loaded roms from xda and also rootgalaxynote.com none are working. I had the most luck with objection 2. it installs then I wipe the delvik and install a tmo radio. then I do a system reboot. it then goes black says samsung like 20 times it just loops and thats it. cant get anything to work please help
Try to flash with twrp. You can load it as a zip file through CWM or install Goo Manager (can be downloaded in the Play marketplace).
fraughtsigewulf said:
Try to flash with twrp. You can load it as a zip file through CWM or install Goo Manager (can be downloaded in the Play marketplace).
Click to expand...
Click to collapse
Hi, I'm having the same issue. I've flashed a couple different ROMs, all flash the samsung screen then reboot. I tried CWM first, now I am using TWRP.
Suggestions? I think I need to flash a boot.img but I couldn't find a good guide on how to do this.
Random_Illianer said:
Hi, I'm having the same issue. I've flashed a couple different ROMs, all flash the samsung screen then reboot. I tried CWM first, now I am using TWRP.
Suggestions? I think I need to flash a boot.img but I couldn't find a good guide on how to do this.
Click to expand...
Click to collapse
I don't think you need anything beyond the zipped rom files if you ALREADY have TWRP installed. What I do is go to recovery. I wipe Dalvik cache, wipe cache and then factory rest. After that I install the zip. I've found that when ever I've been stuck in the boot loop, it's because I didn't do a proper wipe.
fraughtsigewulf said:
I don't think you need anything beyond the zipped rom files if you ALREADY have TWRP installed. What I do is go to recovery. I wipe Dalvik cache, wipe cache and then factory rest. After that I install the zip. I've found that when ever I've been stuck in the boot loop, it's because I didn't do a proper wipe.
Click to expand...
Click to collapse
Thank you! This did the trick. Apparently in my many attempts I didn't do the right combo.

[Q] Custom Roms not booting on my ZR

I unlocked my ZR's bootloader and tried installing these roms:
Carbon Rom
Beanstalk
LiquidSmooth
But after installing any of these, my phone wont boot completely.
It goes past the SONY screen and loads the animation of the rom that i flashed, the animation still goes on - it is not stuck.
This goes on for like half an hour and still does not go any further.
I will explain the steps i followed.
1. Unlocked bootloader
2. flashed the boot.img of the corresponding rom
3. booted to recovery -- vol up
4. Wipe data/ fac reset
5. wipe cache partition and Dalvik
6. installed the rom and rebooted
Is there anything else i am missing here ?
ajeesh.m said:
I unlocked my ZR's bootloader and tried installing these roms:
Carbon Rom
Beanstalk
LiquidSmooth
But after installing any of these, my phone wont boot completely.
It goes past the SONY screen and loads the animation of the rom that i flashed, the animation still goes on - it is not stuck.
This goes on for like half an hour and still does not go any further.
I will explain the steps i followed.
1. Unlocked bootloader
2. flashed the boot.img of the corresponding rom
3. booted to recovery -- vol up
4. Wipe data/ fac reset
5. wipe cache partition and Dalvik
6. installed the rom and rebooted
Is there anything else i am missing here ?
Click to expand...
Click to collapse
go in mounts & format system with all othe wipes
& try
+1 if the ROM animation is shown then rom must boot up
plz try again
You have to boot the stock firmware first.
Flash a stock rom
Boot it properly
Turn off the phone
Flash the custom rom kernel using fastboot
Do your wipes
Install the custom rom zip
The phone should boot properly now
FreaKHead said:
go in mounts & format system with all othe wipes
& try
+1 if the ROM animation is shown then rom must boot up
plz try again
Click to expand...
Click to collapse
abdozoon said:
You have to boot the stock firmware first.
Flash a stock rom
Boot it properly
Turn off the phone
Flash the custom rom kernel using fastboot
Do your wipes
Install the custom rom zip
The phone should boot properly now
Click to expand...
Click to collapse
I followed your instructions.
I flashed a .310 rom first and rooted it.
then unlocked my bootloader -- i got a bootloop
I powered off the device and flashed the rom's kernel and wiped everything except external sdcard
booted to recovery and flashed the rom and rebooted.
I am getting the same issue.
ajeesh.m said:
I followed your instructions.
I flashed a .310 rom first and rooted it.
then unlocked my bootloader -- i got a bootloop
I powered off the device and flashed the rom's kernel and wiped everything except external sdcard
booted to recovery and flashed the rom and rebooted.
I am getting the same issue.
Click to expand...
Click to collapse
flash .310 again then flash a custom kernel and the send me screenies of about phone
I flashed .310 and flashed the kernel of "beanstalk" rom and flashed "beanstalk" rom without wiping anything.
the device booted completely with no issues.

Phone doesn't boot, just samsung logo

Hello, I have an s3 mini I8190N model, with CM 11.0 kitkat 4.4.4(cm11.0_golden.nova.20150108) installed on it since nearly its release, the phone worked very fine, till today I entered the ROM manager app and pushed the "Boot to Recovery" button, so now it doesn't boot neither to the system nor to the recovery. I remember having CWM on it.
What I get now is only the "Samsung S3 mini..." splash screen, nothing else.
I have these files ready on my computer:
Recovery-CWM-I8190-Official-TOUCH-6.0.2.7.ODIN.zip
cm11.0_golden.nova.20150108.zip
What should I do now ??
You probably soft bricked your phone, I suggest you to check if you still can go into download mode and flash with Odin a wipe file and then a stock rom, once it is working again flash twrp recovery instead of cwm with Odin and try not to use rom manager, I've heard it causes the brick you have.
hng34 said:
You probably soft bricked your phone, I suggest you to check if you still can go into download mode and flash with Odin a wipe file and then a stock rom, once it is working again flash twrp recovery instead of cwm with Odin and try not to use rom manager, I've heard it causes the brick you have.
Click to expand...
Click to collapse
Yes, I can go to download mode, but will my data persist after flashing ?
daemon11 said:
Yes, I can go to download mode, but will my data persist after flashing ?
Click to expand...
Click to collapse
Not if you flash the wipe file, you can try flashing the stock rom without the wipe but It's recommended to do a clean install. Another option is to flash a file called PARAM to see if it solves the bootloop. But the way I fixed a softbrick in my phone was flashing param, wipe and stock rom in that order with Odin.
Are you able to go into recovery?
hng34 said:
Not if you flash the wipe file, you can try flashing the stock rom without the wipe but It's recommended to do a clean install. Another option is to flash a file called PARAM to see if it solves the bootloop. But the way I fixed a softbrick in my phone was flashing param, wipe and stock rom in that order with Odin.
Are you able to go into recovery?
Click to expand...
Click to collapse
I will install TWRP through Odin v3 on the phone, then I'll flash without wiping data, then I'll recover necessary data(especially contacts) and then redo a clean install with wiping all the rubbish files.
I will tell you after I follow these steps on whether it was successful or not.
Thank you very much!
daemon11 said:
I will install TWRP through Odin v3 on the phone, then I'll flash without wiping data, then I'll recover necessary data(especially contacts) and then redo a clean install with wiping all the rubbish files.
I will tell you after I follow these steps on whether it was successful or not.
Thank you very much!
Click to expand...
Click to collapse
No problem, flash the custom recovery after the stock rom though.
hng34 said:
No problem, flash the custom recovery after the stock rom though.
Click to expand...
Click to collapse
Effectively, I installed the missing recovery software (TWRP), and after that I selected from the boot menu in TWRP the "System" entry, then it booted fine and I didn't lose any of my data. Though I have to make a clean flash next time, by cleaning the dalvik cache... etc.
Thank you for your support!

[HELP] Stuck in Boot Loop!

Hello All,
I'm trying to flash the 4.1.11 version of the DynamicKat ROM and i'm stuck in a boot loop. I followed the instructions line by line. Any clue what is causing this?
Thanks to all who respond.
Just tried the most latest version (4.2.9), and still the same boot loop. The Note4 logo shows up for 10 seconds, then the phone vibrates twice and repeats.
I followed these instructions:
"Download rom and or theme and place on SDCard. N910W8 USERS MUST HAVE A KERNEL TO FLASH AFTER INSTALLING ROM.
Reboot Device and enter recovery by holding volume up + power + home button
Make a backup of current ROM
Factory Reset from wipe menu is preferred.
Goto advanced wipe menu, WIPE system, cache and dalvik cache!
Do it one more time just in case
Install Rom.zip. DO NOT FLASH ROM AND THEME AT SAME TIME
Reboot device ( allow up to 5 minutes for device to boot to Setup wizard)."
Foye said:
Just tried the most latest version (4.2.9), and still the same boot loop. The Note4 logo shows up for 10 seconds, then the phone vibrates twice and repeats.
I followed these instructions:
"Download rom and or theme and place on SDCard. N910W8 USERS MUST HAVE A KERNEL TO FLASH AFTER INSTALLING ROM.
Reboot Device and enter recovery by holding volume up + power + home button
Make a backup of current ROM
Factory Reset from wipe menu is preferred.
Goto advanced wipe menu, WIPE system, cache and dalvik cache!
Do it one more time just in case
Install Rom.zip. DO NOT FLASH ROM AND THEME AT SAME TIME
Reboot device ( allow up to 5 minutes for device to boot to Setup wizard)."
Click to expand...
Click to collapse
Try flashing a different kernel...
This was posted in the ROM thread. Would flashing an of these two fix my problem? Thanks!
Quote:
Originally Posted by bigZ
It's probably the root of your problems. You're running a lollipop baseband with a KitKat ROM. Flash a stock KitKat baseband and you should be good.
http://forum.xda-developers.com/show....php?t=2677252
Would anything in the above thread work?
Are any of the below options what I'm looking for?
4.3 Stock mk2 Firmware in case anybody needs it
https://mega.co.nz/#!44AgmayA!tPmGd4...K4nlKaJz11wznI
4.4 Baseband thanks 2 @Fenny make sure to thank him for this
https://mega.co.nz/#!k1gEzDgQ!nDZe4s...GYCQ5VLvX6dFag

After flashing always boot into twrp mode...

after flashing my device k3 note its always boot into twrp mode.. iam facing this problem in first time.. what to do? please help me?
anildavis said:
after flashing my device k3 note its always boot into twrp mode.. iam facing this problem in first time.. what to do? please help me?
Click to expand...
Click to collapse
which ROM did u flash?
shamanth_gowda said:
which ROM did u flash?
Click to expand...
Click to collapse
i flashed lot of rom.. actually when i tried to place factory resetting in settings, it switch off and after that the problem begun
anildavis said:
i flashed lot of rom.. actually when i tried to place factory resetting in settings, it switch off and after that the problem begun
Click to expand...
Click to collapse
If u have a backup of the boot try flashing it OR since u are able to access TWRP, flash another ROM(which was stable) properly after wiping the partitions..
U can copy paste another ROM zip file from pc since the internal storage can be accessed from pc in TWRP mode..
Good luck!!
Same happened here. Please suggest some solution.
same happened to me: the phone was encrypted!!!
i discovered myself that... or the twrp 3.1.1.0 does NOT support encryption............ OR the resurrection remix rom that i used does not support encryption.
try to format data, change file system and return to ext4. i fixed the problem reflashing the new rom but this time KEEPING THE ENCRIPTION OFF
My phone TWRP-looped many times. The solution is actually easy.
1. Reflash using SPFlashtool ONLY the stock recovery
2. boot into stock recovery
3. choose english > press reboot phone
4. phone will reboot into rom without problemos
5. reflash TWRP
cheers
or
1. Copy stock recovery.img into sdcard
2. In twrp, select Install and navigate to where you put stock recovery.img
3. Press install image. Then, Select recovery.img. Slide to install
4. boot into stock recovery
5. choose english > press reboot phone
6. phone will reboot into rom without problemos
7. reflash TWRP
DONE

Categories

Resources