If you're having matching build number and February security patch then only it will work. Having May security patch or different build number will brick your phone definitely. Guide is also provided and credit goes to the website Holder.
https://androidgeek.pt/moto-g4-play-recebe-android-7-1-1-atraves-soak-test#
Related
http://download-c.huawei.com/download/downloadCenter?downloadId=89545&version=348048&siteCode=za
This is for GRA-L09. I have not flashed this yet. I am on C432 so I assume a cust change is required for this version. I am still downloading so I am unaware of the content. It seems to be a full version.
please update here on your result
Edit :
after i google it, this is official android marshmallow update for Vodafone
That's correct. C02 is Vodafone. I have downloaded it. Inside hold only update.app, so a rebranding process would be required before this can be successfully flashed. Also, this doesn't seem to be very new seeing that it was released 20 Sept. If I get any more information on the rebranding process, I will add the detail here. For me, this particular version may be useful because it has been released for my specific network.
changelog?
I don't have a change log
The only other version available to my regional for any operator was C02B397 which is what my phone had preinstalled. Based on this, I would assume (perhaps a bit reluctantly) that this may specifically require that version to be on your phone. There is no migration package at all, which could possibly mean that this cannot be installed over marshmallow or even other versions of lollipop later than 5.0. Again, this is just assumption. There is no change log available that I can find anywhere.
Version B390
As seen in HTCMANIA, a spanish specialized forum, an user, when looking for the complete B382 ROM in Huawei Software Finder, found a B382 complete version that actually is B390, with December 2016 Security Patch.
Does anyone know something about this? I couldn´t open a new thread due to my post number.
Have an xt1254 (bought at Best Buy/setup with Verizon). After screen replacement, the microphone does not appear to work during a call. The problem appears to be very specific to when using the phone as a "handset" in both regular and speakerphone modes. I can talk on call OK via Bluetooth connection in the car and when I have earbuds/mic plugged in. Mic seems to function OK from the handset when NOT in a call. For example, Google can hear me when I do a "hey google" and ask a question.
After screen replacement, I was receiving "google play services has stopped" every couple of seconds. Was able to overcome that issue eventually by doing a force stop on google play services and then uninstall updates. After all the apps got updated as required, all seemed fine... Until I received my first call and I couldn't answer!
Problem still occurs when I boot into safe mode.
Here is all the version info:
android version 6.0.1
security patch Jan 1, 2017
Config version l15.MOT.XT1254.0
Baseband version MDM9625_41.51.07.22.04R Quark_cust
Kernal version 3.10.40-perf-g1577812
hudsoncm#ilcibid33 #1
Mon Jan 30 08:46:52 CST 2017
System version 24.91.5.quark_verizon.verizon.en_us
build Number MCG24.251-5-5
Any suggestions for troubleshooting this would be greatly appreciated. I'm still hoping its some sort of software issue/corruption/inconsistency somewhere. Have not yet tried factory reset. From my readings, it didn't appear that did anything for others, but if that is the suggestion, am willing.
Updated info from further testing:
When in a call, the handset microphone acts like its sending the voice to the speakers instead of "over the wire" to the phone called. In other words, when I speak into the microphone in the handset, I can hear what I said back in the speakers at the top of the phone, but the person I called hears nothing. Very odd.
Same issue
I got the exact same issue. I have factory reset, and even installed update using Verizon update repair tool.
micro works on video recording and bleeds back to ear speaker on calls. But will not work on voice recording apps. Calls work o.k. with headset but not mic or speakerphone.
Droid Turbo XT1254 Handset mic not working
I also have the same issue with my Droid Turbo XT1254. I have factory reset it multiple times while working with Verizon support. I also used the repair tool to reload the OS. No change at any point after these attempts.
The one thing I did isolate is that the problem started after the software update
From version - 24 . 81 . 5 . quark_verizon . verizon . en . us (January 06, 2017 11:00 am)
To version - 24 . 91 . 5 . quark_verizon . verizon . en . us (March 08, 2017 11:12 am)
I most recently discussed this with a Motorola tech and his obvious answer was to go back to version - 24 . 81 . 5 . quark_verizon . verizon . en . us. But I had ask Verizon this before and they would not release that to me. At least now I know that this is a software issue because there are at least three of us out there. Does anyone know where that past version might be available to download.?
My phone info is exactly the same as SudoTechie:
android version 6.0.1
security patch Jan 1, 2017
Config version l15.MOT.XT1254.0
Baseband version MDM9625_41.51.07.22.04R Quark_cust
Kernal version 3.10.40-perf-g1577812
hudsoncm#ilcibid33 #1
Mon Jan 30 08:46:52 CST 2017
System version 24.91.5.quark_verizon.verizon.en_us
build Number MCG24.251-5-5
Thanks in advance for any time and assistance.
SpinIt46 said:
I also have the same issue with my Droid Turbo XT1254. I have factory reset it multiple times while working with Verizon support. I also used the repair tool to reload the OS. No change at any point after these attempts.
The one thing I did isolate is that the problem started after the software update
From version - 24 . 81 . 5 . quark_verizon . verizon . en . us (January 06, 2017 11:00 am)
To version - 24 . 91 . 5 . quark_verizon . verizon . en . us (March 08, 2017 11:12 am)
I most recently discussed this with a Motorola tech and his obvious answer was to go back to version - 24 . 81 . 5 . quark_verizon . verizon . en . us. But I had ask Verizon this before and they would not release that to me. At least now I know that this is a software issue because there are at least three of us out there. Does anyone know where that past version might be available to download.?
My phone info is exactly the same as SudoTechie:
android version 6.0.1
security patch Jan 1, 2017
Config version l15.MOT.XT1254.0
Baseband version MDM9625_41.51.07.22.04R Quark_cust
Kernal version 3.10.40-perf-g1577812
hudsoncm#ilcibid33 #1
Mon Jan 30 08:46:52 CST 2017
System version 24.91.5.quark_verizon.verizon.en_us
build Number MCG24.251-5-5
Thanks in advance for any time and assistance.
Click to expand...
Click to collapse
We have all the firmware posted in this forum, and if not here there are 3rd party repositories for Motorola firmware.
But you can't cannot downgrade if you bootloader is not unlocked. Every Motorola update has a "newer" bootloader and you can't go backwards unless you have unlocked bootloader. Even then you have to omit gpt.bin from the flash commands. But you can then downgrade firmware, with unlocked bootloader. You can go all the way back to KitKat 4.4.4 with unlocked bootloader if you wish.
I created a backup from TWRP tonight and I noticed that the serial number of my phone has changed from ZX1G2***RS to 65***e28. Is this an issue I have to worry about? I have made multiple TWRP backups and the serial number has always been the first serial number. Even when going to Settings > About Phone > Status it now shows the second (new) serial number. I haven't factory reset or wiped the phone in quite a while, I've only installed the monthly security updates.
I have the same problem after updated to the latest 2017.10.06. LineageOS build, i have a new serial number in bootloader, TWRP and in Android itself (ZX1G*****G changed to 9d1****7). I have to reactivate my mobile banking app because of this.
The same thing happened to me after sideloading the October 5, 2017 security update.
8zabi said:
I have the same problem after updated to the latest 2017.10.06. LineageOS build, i have a new serial number in bootloader, TWRP and in Android itself (ZX1G*****G changed to 9d1****7). I have to reactivate my mobile banking app because of this.
Click to expand...
Click to collapse
stevemw said:
The same thing happened to me after sideloading the October 5, 2017 security update.
Click to expand...
Click to collapse
Weird. Thanks for your replies!
long time reader of the site first time poster. i love xda and i havent seen this method of frp for ths device mentioned anywhere and i saw it as maybe a opportunity to contribute back to the site
anyways what i did was during inital setup and what not use the talkback method to get to the language download page and i just clicked a bunch of different languages download button and eventually opened up the samsung app store and was able to downloiad my way into the settings from there i just disabled the most of google apps and cleared the cache was able to add my gmail account and voiila
device info:
sm g960u on 8.0.0
samsung expeirence version 9.0
baseband g960usqs3brj6
build# r16nw.g960usqs3brj6
security patch is november 1 2018 (ive only updated it once since frp )
i hope i posted this correctly
exnfox said:
long time reader of the site first time poster. i love xda and i havent seen this method of frp for ths device mentioned anywhere and i saw it as maybe a opportunity to contribute back to the site
anyways what i did was during inital setup and what not use the talkback method to get to the language download page and i just clicked a bunch of different languages download button and eventually opened up the samsung app store and was able to downloiad my way into the settings from there i just disabled the most of google apps and cleared the cache was able to add my gmail account and voiila
device info:
sm g960u on 8.0.0
samsung expeirence version 9.0
baseband g960usqs3brj6
build# r16nw.g960usqs3brj6
security patch is november 1 2018 (ive only updated it once since frp )
i hope i posted this correctly
Click to expand...
Click to collapse
Hi! So, you did this with November 2018 security patch?
that or a earlier one.;..
Seeing a new update for the Verizon Note 9. It is saying update 13. Tried searching for a log and to see why it's about. All it's saying is for security. Any ideas?
Version number? Patch date? C'mon give us some info
Got it yesterday. It's a security update. Haven't seen anything new on my phone, and performance hasn't changed.
CSI3 for VZW and CSI5 for SPR but it's only october security patch ,nothing new