Related
[GT-P6800][3g]Deodexed&Zip-aligned System Apks (cwm update.zip) & System Bar Mod
Hi,
Deodex / zip alignment of the system/framework apks taken from Stock firmware:
From [ZSLA2] firmware. (apps / framework). tested working for this firmware but may work on others.
Again these are just the deodexed versions of the apps already on your system.
You are not changing anything kernel / csc / your data etc.
This is a cwm flashable zip.
Its in two parts. (join the zip files into one)
http://www.mediafire.com/download.php?cwv5ri52j850hbz
http://www.mediafire.com/download.php?qwjfkmdi7z5qepr
(make a cwm backup first - just in case)
Reboot to cwm recovery:
if you copied to internal memory - in cwm go to "install zip from sdcard"
if you copied to your external sdcard - install zip from internal sdcard.
(cwm labels the phone memory / sd card like this !!)
First boot will take approx 3~4 mins.
System Bar Mod - now part of power menu mod in another post.
ezynow
Appreciate the effort, unfortunately boot loops on my tab.
Thanks.
pa64 said:
Appreciate the effort, unfortunately boot loops on my tab.
Thanks.
Click to expand...
Click to collapse
what part did you flash?
thanks.
I flashed the deodex.
Thanks.
---------- Post added at 12:13 AM ---------- Previous post was at 12:09 AM ----------
Just realized I am on a different firmware (XXLA3).
Could it be the cause for the bootloop?
pa64 said:
I flashed the deodex.
Thanks.
Click to expand...
Click to collapse
cool - if its not too much effort can manually copy over the apks from the zip into the /system/framework/ and into /system/app/ using adb. (first remove all files under those folders).
then wipe davik & wipe cache partition.
and reboot.
i have installed it on my tab so should work ok.
might need to reupload again
thanks again
pa64 said:
I flashed the deodex.
Thanks.
---------- Post added at 12:13 AM ---------- Previous post was at 12:09 AM ----------
Just realized I am on a different firmware (XXLA3).
Could it be the cause for the bootloop?
Click to expand...
Click to collapse
ok i tried it again and worked fine so looks like a firmware incompatibilty issue.
would like to narrow the issue down.
appreciate the feedback.
just to make sure, can you please post the MD5 checksum of the Deodex zip file?
Thanks.
pa64 said:
just to make sure, can you please post the MD5 checksum of the Deodex zip file?
Thanks.
Click to expand...
Click to collapse
uploaded md5.
in first post, just rename it to GTP6800DEODEX.zip.md5
cheers
Guys, please post the stock! Or op, please post the stock battery stuff!
ftgg99 said:
Guys, please post the stock! Or op, please post the stock battery stuff!
Click to expand...
Click to collapse
all stock apks are in the original deodexed zip. just extract it from /system/framework/ and copy over.
i will edit the batt stuff when i get some time should remove it in the mean time.
did u flash the deodexed.zip ok in the first place?
MD5 did not match. Possibly a bad download.
Your file's link is temporarily disabled in Dropbox...
Can you post on another file server?
Thanks.
ezynow said:
uploaded md5.
in first post, just rename it to GTP6800DEODEX.zip.md5
cheers
Click to expand...
Click to collapse
pa64 said:
MD5 did not match. Possibly a bad download.
Your file's link is temporarily disabled in Dropbox...
Can you post on another file server?
Thanks.
Click to expand...
Click to collapse
Sorry dude.
Dont think I can get any more links up for a while. Will update when I can.
These were just meant for evaluation purposes only not anything more.
Hopefully I can sort it out soon.
cheers.
I'm currently recovering a hard bricked GT-P6800 and have it revived via JTAG. ODIN is not permitting a factoryfs file to flash to the device but I have been successful in flashing all other zones (cache, hidden, param, zimage and recovery). Can some PLEASE do a factory data reset, then a backup in CWM and upload that backup for me to recover from?
Thanks!
connexion2005 said:
I'm currently recovering a hard bricked GT-P6800 and have it revived via JTAG. ODIN is not permitting a factoryfs file to flash to the device but I have been successful in flashing all other zones (cache, hidden, param, zimage and recovery). Can some PLEASE do a factory data reset, then a backup in CWM and upload that backup for me to recover from?
Thanks!
Click to expand...
Click to collapse
how did u do a hard brick?
i have sucessfully used heimdall (linux) before to flash the factoryfs from the stock firmware. there is a download link somewhere.
also when trying a dd image of factoryfs /system partition using heimdall was not sucessful. so odin might be the same.
have u tried a stock factoryfs?
The unit was hard bricked with an invalid PIT and 10.1v firmware meant for a Tegra 2 unit. I'm very familiar with any/all flashing techniques and have tried to flash this zone with both ODIN, Heimdall and SPT Tool. It refuses to accept a factoryfs flash or a bootloader flash. I broke down a firmware and individually tar'd all files within it and they ALL flash except for factoryfs which fails at around 5-10% religiously. This is why I need a CWM backup or zip to flash/restore from. If you could PM the link to me that would be amazing as I understand you may not want it public. I'm sure you know within a backup (after a factory reset) there is no data to remain that would be your personal data so it's 100% safe. Once I am done, I will fully JTAG dump the first 1024MB of the EMMC chip to create a JTAG firmware backup as a secondary method of recovery when ODIN does not work...
Really could use this if you get a chance...
connexion2005 said:
Really could use this if you get a chance...
Click to expand...
Click to collapse
I will try find something for you when I get a chance
Ezynow,
since you deodexed your tab, what is the outcome in term of speed?
I feel plenty of lag on scrolling within the browser, any better wth deodex?
Cheers.
ezynow said:
I will try find something for you when I get a chance
Click to expand...
Click to collapse
Thanks I'd appreciate that and I'll shoot you a donation if possible to buy you a drink or 2.
pa64 said:
Ezynow,
since you deodexed your tab, what is the outcome in term of speed?
I feel plenty of lag on scrolling within the browser, any better wth deodex?
Cheers.
Click to expand...
Click to collapse
sometimes i think its faster but i think this has to do with zip alignment as well.
for my browser, its pretty snappy. i do have flash/scripts turned to on demand as opposed to always on.
also i use a ad blocking hosts file.
xda defn. loads faster than before
connexion2005 said:
Thanks I'd appreciate that and I'll shoot you a donation if possible to buy you a drink or 2.
Click to expand...
Click to collapse
i though i had a default backup somewhere, i will try find it. will just a system partition backup do. i have one of those from a cwm. i will sort something out and pm you.
ok, its done
****http://pan.baidu.com/share/link?shareid=3780073824&uk=17867859
1. Download the ROM from link above (Thanks to the creator)
2. Download Flashable CWM v7
3. Dwonload Flashable SuperSU
4. Now, if you r in rooted .411 with CWM , copy all of the above zips in memory, if not go get rooted and CWM installed .411 first
5. Reboot to CWM, flash the ROM, Flash the SUperSU, Flash the CWM
6. Reboot
7. Then you will have a rooted CWM installed system with old JB Kernel from .411
8. Now open flashtool, goto flash mode, select .67 FTF and select only KERNEL and BASEBAND (exclude all other and remove the tics from WIPE DATA, WIPE CACHE, WIPE APPSLOG and tic no final verification )
9. FLASH em
# NOW YOU HAVE A FULLY 9.1.b.1.67 DEodexed, rooted, CWM installed STOCK ROM with all of its features
anyone check it
devilmaycry2020 said:
anyone check it
Click to expand...
Click to collapse
i did it myself and seemed to have no probs at all what so ever, or you were asking for a second opinion ??
chinmoy32 said:
i did it myself and seemed to have no probs at all what so ever, or you were asking for a second opinion ??
Click to expand...
Click to collapse
did u try to edit system files and without reboot ?
Leo said:
did u try to edit system files and without reboot ?
Click to expand...
Click to collapse
yeap, i am doing it since last night and there was not a single reboot
as a matter of fact i just modified my build.prop and saved it and changed it permission to 777 with Xplore :laugh:
Locked or unlocked bootloader? or both?
chinmoy32 said:
yeap, i am doing it since last night and there was not a single reboot
as a matter of fact i just modified my build.prop and saved it and changed it permission to 777 with Xplore :laugh:
Click to expand...
Click to collapse
thanks! ill try ur method!
chinmoy32 said:
8. Now open flashtool, goto flash mode, select .67 FTF and select only KERNEL and BASEBAND (exclude all other and remove the tics from WIPE DATA, WIPE CACHE, WIPE APPSLOG and tic no final verification )
Click to expand...
Click to collapse
You do not have to update the baseband, it may be worth NOT selecting the baseband. If anyone gets any connection issues restore a .411 backup, go through the process again and this time do NOT select baseband.
SammiSaysHello said:
Locked or unlocked bootloader? or both?
Click to expand...
Click to collapse
the particular method is for locked bootoaders, but the point is if you have an unlocked BL u can achieve
the above in more easy ways like flashing doomkernel or so
gregbradley said:
You do not have to update the baseband, it may be worth NOT selecting the baseband. If anyone gets any connection issues restore a .411 backup, go through the process again and this time do NOT select baseband.
Click to expand...
Click to collapse
thanks for the info, but i thought a updated baseband wont hurt anyone as i am using it on my TX while selecting LTE (preferred)WCDMA,GSM even though TX has no LTE radio support from hardware. so u know no one should have any connection problems........
I have my phone flashed using this way.But when I want to delete a system app, chrome.apk, my phone is reboot automatically~~~~:crying: and,every time I located the system/app it reboot automatically
There is a reboot fix .zip somewhere in the general section.
You can flash that and see if it works on this firmware.
Its specifically for fixing the reboot when editing system files bug
Everything works, but now the phone is not charging off.
nnmka said:
Everything works, but now the phone is not charging off.
Click to expand...
Click to collapse
i have been getting infos on reboot when editing system apps and files from other users but cant understand why not I having this problem !!
but phone is not charging ??!!! how come !!!
tianzhisun said:
I have my phone flashed using this way.But when I want to delete a system app, chrome.apk, my phone is reboot automatically~~~~:crying: and,every time I located the system/app it reboot automatically
Click to expand...
Click to collapse
I can confirm reboot when touching any system app...Trying to look for the reboot fix.zip, anyone know where I can find it. I searched "general" already. thks
try this, not sure its the right one, but you can give it a go.
Edit
This does not work
gregbradley said:
try this, not sure its the right one, but you can give it a go.
Click to expand...
Click to collapse
thanks, will give it a try
---------- Post added at 08:39 PM ---------- Previous post was at 08:30 PM ----------
jameswood24 said:
thanks, will give it a try
Click to expand...
Click to collapse
Caused a bootloop
ok, its the wrong one then.
Restore your backup
jameswood24 said:
I can confirm reboot when touching any system app...Trying to look for the reboot fix.zip, anyone know where I can find it. I searched "general" already. thks
Click to expand...
Click to collapse
I have tried several methods to root my phone without unlocked BL, but when I edited system app the reboot occurred every times.It seems that to root the 1.67 without unlocked BL was hopeless……But, I have found a compromisingly way that allow u edit sys apps, root permission and CMW.
jameswood24 said:
thanks, will give it a try
---------- Post added at 08:39 PM ---------- Previous post was at 08:30 PM ----------
Caused a bootloop
Click to expand...
Click to collapse
rebootfix,ZIP does not help
I rooted my device and installed IHackers rom, now it says that it can't find the root when I open superSU.
The error is there is no su binary installed and supersu cannot install it. this is a problem
Sent from my C6903 using xda app-developers app
Hanozy said:
I rooted my device and installed IHackers rom, now it says that it can't find the root when I open superSU.
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
I fixed it, so you can remove the thread.
For those who are experiencing this problem just flash the supersu zip into your phone in recovery mode http://forum.xda-developers.com/showthread.php?t=1538053
Alright this happened yet again today and I can't do anything, after the ROMflash it looks like my recovery mode has been deleted so I can't flash the supersu zip, what should I do?
The error is "there is no su binary installed and supersu cannot install it. this is a problem"
Searching for this problem in google led me to the answer that no, I can't fix it using google search because that requires a recovery mode which I don't have access to.
Did you try to reflash the recovery form FlashTool?
eclyptos said:
Did you try to reflash the recovery form FlashTool?
Click to expand...
Click to collapse
Will it remove anything on my phone?
How do reflash dualrecovery in flashtool?
Hanozy said:
Will it remove anything on my phone?
Click to expand...
Click to collapse
No, recovery is implemented in kernel and that will not wipe your data, just be careful with the flashtool and uncheck everything what you don't need, specially "Wipe Data".
eclyptos said:
No, recovery is implemented in kernel and that will not wipe your data, just be careful with the flashtool and uncheck everything what you don't need, specially "Wipe Data".
Click to expand...
Click to collapse
Could you tell me where I download the flash file
Hanozy said:
Could you tell me where I download the flash file
Click to expand...
Click to collapse
Let me find it. Should be somewhere a kernel with dual recovery...
---------- Post added at 08:09 PM ---------- Previous post was at 08:02 PM ----------
Here you go http://forum.xda-developers.com/showthread.php?t=2448613
This kernel is implemented with dual recovery and you should install it in Fastboot Mode BUT is for Bootlader Unlocked only!
Are you on Unlocked Bootlader?
eclyptos said:
Let me find it. Should be somewhere a kernel with dual recovery...
---------- Post added at 08:09 PM ---------- Previous post was at 08:02 PM ----------
Here you go http://forum.xda-developers.com/showthread.php?t=2448613
This kernel is implemented with dual recovery and you should install it in Fastboot Mode BUT is for Bootlader Unlocked only!
Are you on Unlocked Bootlader?
Click to expand...
Click to collapse
I'm on locked bootloader
Hanozy said:
I'm on locked bootloader
Click to expand...
Click to collapse
So it's a problem, at the moment I don't know any kernel with recovery for locked bootloaders. I think you should take in consideration to flash Stock FTF and wipe everything to make a clean installation and repeat the procedure to get root and recovery on your phone. I think is too compromise.
---------- Post added at 08:42 PM ---------- Previous post was at 08:39 PM ----------
If you need more help maybe you should ask here http://forum.xda-developers.com/showthread.php?t=2598582
eclyptos said:
So it's a problem, at the moment I don't know any kernel with recovery for locked bootloaders. I think you should take in consideration to flash Stock FTF and wipe everything to make a clean installation and repeat the procedure to get root and recovery on your phone. I think is too compromise.
---------- Post added at 08:42 PM ---------- Previous post was at 08:39 PM ----------
If you need more help maybe you should ask here http://forum.xda-developers.com/showthread.php?t=2598582
Click to expand...
Click to collapse
How do I go about saving my data and such.
Hanozy said:
How do I go about saving my data and such.
Click to expand...
Click to collapse
I don't think it's a good idea. I know you try to do everything you can to keep your data buy actually this will not be possible if you try all the process again. It's recommended to wipe everything to make a clean installation.
eclyptos said:
I don't think it's a good idea. I know you try to do everything you can to keep your data buy actually this will not be possible if you try all the process again. It's recommended to wipe everything to make a clean installation.
Click to expand...
Click to collapse
Damn, I really need some of the stuff on my phone, will have to think this one through.
for locked bootloaders u can try this....http://forum.xda-developers.com/showthread.php?t=2455959
mohit378 said:
for locked bootloaders u can try this....http://forum.xda-developers.com/showthread.php?t=2455959
Click to expand...
Click to collapse
I was thinking about that but he have problem with root, which is needed.
Hello fellas...just rooted my note 4 using odin. After rooting I tried to install the TWPR flash recovery to no evail. For some reason after downloading the recovery file, when I open it up in odin it get's stuck on the screen ( using my computer). So I cannot install it to my phone....yet. I did download ROM toolbox pro...i do notice there is a recovery option here. Is this the same thing as the TWPR recovery? Do I absolutely need TWPR recovery? really new to this so all and any info will help thanks!
Use an older version of Odin. I'm using 3.04 everyday. Yes you need a custom recovery.
http://forum.xda-developers.com/showthread.php?t=1703998
freshverse said:
Hello fellas...just rooted my note 4 using odin. After rooting I tried to install the TWPR flash recovery to no evail. For some reason after downloading the recovery file, when I open it up in odin it get's stuck on the screen ( using my computer). So I cannot install it to my phone....yet. I did download ROM toolbox pro...i do notice there is a recovery option here. Is this the same thing as the TWPR recovery? Do I absolutely need TWPR recovery? really new to this so all and any info will help thanks!
Click to expand...
Click to collapse
Did you install Chainfire Root before trying to install TWRP. I have a short Odin video on YouTube I made for another member that you can check out. See if it helps you
http://youtu.be/hMOsw0RDeSQ
Remember that this was for a specific member and rom he was installing as far as the Firekat files. The Odin, chain root, and twrp will work for your needs. You might want to update the twrp to 2.8.4.
2.8.1 works fine for me so that what I have installed
lances1027 said:
Did you install Chainfire Root before trying to install TWRP. I have a short Odin video on YouTube I made for another member that you
Remember that this was for a specific member and rom he was installing as far as the Firekat files. The Odin, chain root, and twrp will work for your needs. You might want to update the twrp to 2.8.4.
2.8.1 works fine for me so that what I have installed
Click to expand...
Click to collapse
Yes used odin for chainfire root...i downloaded the recovery file but when i load in odin via pda it says program not responding and I end up having to shut down Odin.
freshverse said:
Yes used odin for chainfire root...i downloaded the recovery file but when i load in odin via pda it says program not responding and I end up having to shut down Odin.
Click to expand...
Click to collapse
make sure your file is a tar file and not an image, if it is good then I would try a different version of Odin as mentioned before. If still no luck I would definitely try a different file location to get the Download or a different version of TWRP. I have files that I know work if you need.
Hope we helped
Also when your loading in the pda slot it takes a minute to populate in the slot sometimes 60 seconds....
That is normal. Sometimes when loading firmware it takes up to 3 minutes or so for the md5 check to be done. Usually root and recovery aren't quite as long but still can take a min.
freshverse said:
Do I absolutely need TWPR recovery?
Click to expand...
Click to collapse
To answer this question, are you planning on flashing ROMs? If not, I wouldn't worry about TWRP. Some people just like to ROOT and be on their way.
lances1027 said:
That is normal. Sometimes when loading firmware it takes up to 3 minutes or so for the md5 check to be done. Usually root and recovery aren't quite as long but still can take a min.
Click to expand...
Click to collapse
Yeah I realized that when I loaded the chainfire file in odin. But after waiting 10 minutes for the recovery file , I figured something was wrong. If you can provide me with the recovery link that would be great. Its for the note 4 t mobile.
What version where you using?
---------- Post added at 07:06 AM ---------- Previous post was at 06:57 AM ----------
Here is 2.8.4
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.4.0-trltetmo.img.tar
And 2.8.1
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.1.1-trltetmo.img.tar
lances1027 said:
What version where you using?
---------- Post added at 07:06 AM ---------- Previous post was at 06:57 AM ----------
Here is 2.8.4
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.4.0-trltetmo.img.tar
And 2.8.1
http://www.techerrata.com/file/twrp2/trltetmo/openrecovery-twrp-2.8.1.1-trltetmo.img.tar
Click to expand...
Click to collapse
okay here is the thing when I try to save this file to my computer it saves it as openrecovery-twrp-2.8.4.0-trltetmo.img ...not openrecovery-twrp-2.8.4.0-trltetmo.img.tar what gives?
That is the problem. Try adding the .tar to the end
lances1027 said:
That is the problem. Try adding the .tar to the end
Click to expand...
Click to collapse
Ok now do I open up this file using winrar before i select it in odin pda ...or select it in odin pda as is?
As is
---------- Post added at 09:27 AM ---------- Previous post was at 08:59 AM ----------
Make sure that after it reboots you turn off your device. Hold volume up, power and the home button at the same time and go into recovery mode and back your device up. Leave what is x'ed off as is but I also back up the modem. Change the location of the back up to be saved to your SD card. Factory wipe, the advanced, checking off dalvik, system, data and cache. DO NOT WIPE INTERNAL or SD card. Reboot your phone. Let it sit for 5 min on the welcome screen then enjoy
---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------
If you need some good apks and a great couple roms go check out Megas Fire Kat V8. Awesome rom.
If I've helped don't forget to hit the thanks button
lances1027 said:
As is
---------- Post added at 09:27 AM ---------- Previous post was at 08:59 AM ----------
Make sure that after it reboots you turn off your device. Hold volume up, power and the home button at the same time and go into recovery mode and back your device up. Leave what is x'ed off as is but I also back up the modem. Change the location of the back up to be saved to your SD card. Factory wipe, the advanced, checking off dalvik, system, data and cache. DO NOT WIPE INTERNAL or SD card. Reboot your phone. Let it sit for 5 min on the welcome screen then enjoy
---------- Post added at 09:28 AM ---------- Previous post was at 09:27 AM ----------
If you need some good apks and a great couple roms go check out Megas Fire Kat V8. Awesome rom.
If I've helped don't forget to hit the thanks button
Click to expand...
Click to collapse
Okay so I figured out what was wrong..for some reason my winrar program was messing up the .tar file, so I deleted winrar and was able to do the recovery without a problem! Thank you for your help fellas I hit that thanks button as much as I could..lol. Okay so now I think I want to try out a rom but....I don't see any youtube videos of people showing off firekat rom for the note 4...is firekat compatible with the note 4?
Firekat is definitely compatible with the note 4. Here's the thread:
http://forum.xda-developers.com/showthread.php?t=2916463
Screen shot 2
Android_Monsters said:
Screen shot 2
Click to expand...
Click to collapse
okay im about to install firekat....so im in recovery mode now I need to do factory reset correct before I install firekat? Which do I check in advanced ...dalvik cache...system..date...cache..??
I don't always clean install firekat, but mega does recommend it. Cache, Dalvik cache, and data.
Not sure if someone has the patience for a newbie here but it's my last hope. got this phone from a reliable source he bought it new tried to unlock the bootloader and screwed up in the middle of the process. I have no idea how fix it as far as what software I ned and how ot use it and which to steps to take. I tried all options in the power plus volume recovery mode, non work, here is what I get:
http://i57.tinypic.com/2d0ngqs.jpg
http://i57.tinypic.com/2v1klqw.jpg
http://i61.tinypic.com/x0s67q.jpg
http://i60.tinypic.com/xoe5oo.jpg
http://i60.tinypic.com/5vn0i0.jpg
http://i57.tinypic.com/mkhfrq.jpg
http://i57.tinypic.com/208enbo.jpg
http://i57.tinypic.com/28ckhh4.jpg
http://i60.tinypic.com/x1alqq.jpg
http://i57.tinypic.com/2dc8n12.jpg
http://i59.tinypic.com/15cd9gg.jpg
http://i57.tinypic.com/mmqu0z.jpg
http://i61.tinypic.com/2vn45mq.jpg
http://i62.tinypic.com/2h2mkhi.jpg
http://i57.tinypic.com/25aj6n9.jpg
http://i60.tinypic.com/2en8g9z.jpg
Any ideas?
Cheers
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
scitech09 said:
It looks like you have a custom recovery and need to flash a ROM. Try downloading a ROM from XDA and flashing it. You need to put the ROM on an SD card and flash it using the menu options.
Click to expand...
Click to collapse
don't have a sd card, can I do this with my mac somehow and usb connected to the phone?
also where do I download the rom and how do I flash it with what software?
Look in the XDA Developers forum under "Xperia Z3 Compact Android Development". You will find various ROMs in the discussions as well as links for downloading them. The ROMs well be large ZIP files. Transfer them to the phone using a tool called ADB. You can install this on a Mac and transfer the ZIP via a USB cable.
---------- Post added at 11:25 PM ---------- Previous post was at 11:24 PM ----------
Google's ADB and Mac for installation instructions.
---------- Post added at 11:28 PM ---------- Previous post was at 11:25 PM ----------
Once the ZIP file is on the phone, boot into recovery mode and select "Install ZIP". Then select the ZIP file that you transferred.
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
basti2909 said:
So u have cwm, thats good for now.
Download a Rom u want to flash. For example a Stock kitkat Rom.then use the cwm sideload Option to copy it to ur internal storage. When this is done wipe System,Cache &dalvik Cache. Do NOT wipe the internal storage.then flash the zip u Put in via sideload and reboot. If u done all correct System should Boot.
Click to expand...
Click to collapse
ua101 said:
I think I wiped it I know I tried to clean everything and pressed every option, not sure, where is the link for the stock kitkat rom, there are so many pages and links I can't find it.
Click to expand...
Click to collapse
You have a custom recovery...you cannot therefore flash a stock rom.
Download a custom rom. Place it on your sd card, and flash it from recovery.