Related
Sorry for my bad english
Source of http://forum.xda-developers.com/crossdevice-dev/sony/xperia-z1-z2-z3-series-devices-drm-t2930672
DISCLAIMER: I AM Not Taking ANY RESPONSIBLE TO YOUR CRASHED SYSTEM OR ELSE,AND PLEASE ASK FOR MY PERMISSION BEFORE YOU INCLUDE IT TO YOU MOD OR WHAT
Quote:Hi Everyone who has the awesome xperia device. Did you getting suffer when unlocking the bootloader it will disable the effect of NOISE-CANCELING, BRAVIA ENGINE, X-REALITY or else?
And for unlocked bootloader users, did you have a little suffer on your broken Noise Canceling , BRAVIA ENGINE?:crying:
So, This mod is for::victory:>This MOD WILL NOT RESTORE YOUR HANDSET'S DRM KEY!
>This mod is only for Unlocked Bootloader Xperia devices
>Reactivated Bravia Engine
>Reactivated Noise cancelling
>Reactivated the picture noise that will appear in dark situation( BionZ)
>Reactivated the red-green noise that appear in dark capturing
BUT THIS MOD WONT RECOVER THE DRM KEYS THAT YOU LOST AFTER UB,THIS MOD IS RESTORING THE FEATURES THAT LOSS BY UNLOCKING THE BOOTLOADER!
Well, Except this the main BANEFITS of this mod is
Just Deodex your ROM and you are going on!
And Its EXTREMELY Light! The size of it was <2MB!
CAUTION: YOU HAVE TO FOLLOW THE INSTRUCTION STEP BY STEP, OR IT MAY COLLAPSE OR IT WILL NOT WORKING!
ANDROID LOLIPOP USERS( STOCK ONLY ) THE MOD HAS BEEN UPDATED AND TESTED BY ME AND TEAM EXR, AND NOW THE NEWER VERSION HAS RELEASED FOR LOLIPOP. WORK!!
AND! MAKE SURE THE FTF YOU DOWNLOADED HAS THE TA PARTITION INSIDE THE FTF, OR THE MOD WILL NOT WORKING TOO!
Requirement:
-> Xperia ZR (C550X) with unlocked bootloader
->FULL complete download FW 10.5.A.0.230 ftf with TA partition##To LP Users: The steps are 100% same as KitKat does, just remember you have to flash LOLIPOP version of mod not KitKat, or it wont work
-------------Lets do it----------
>First, Download the latest version of Flashtool and install in your pc
>Relock your phone's bootloader via the relock bootloader features that build-in in the Flashtool
>AFTER relock the bootloader, DO NOT TURN ON YOUR PHONE, FLASH 10.5.A.0.230 ftf that second steps does to your phone
(Remember to wipe the APPSLOG,CACHE,DATA that flashtool has default wipe it)
>After done the ftf flashing, turn on your phone, root and install twrp or cwm in your zr(230)
>When your phone are complete root and install twrp or cwm(230), use flashtool's bootloader feature and unlock your bootloader again
>After done for the unlocking, you are all green to flash the previous ROM,kernel, in twrp BUT REMEMBER FLASH THE DRM ZIP AFTER YOU FLASHED!
complete!
Tested for me and WORK!
Hi, excuseme a few days ago I unlock my z3+ dual bootloader and try to root it. But after reboot I see that the x-reality and supervivid mode lost! Also camera freez in video mode and dont record.
Now I want back to my previous status befor rooting my phone. I means factory mode when I bought phone.
What can I do?!!!
In these thread I understand some but I want to be sure.
I must download 32.2.A.0.253 ftf file and flash via flashtools. Then I flash your kernel. I downloaded v3 provided by you, is it true?!
Then boot into recovery and flash kernel again and then do factory reset and wipe dalvick cache and cache and reboot.
I dont want root any more.
Is this method that I mentioned restor my lost drm key? And this lost featured will back?
Please answer me. Thank you so much. Sorry for my bad english.
Note that Im on 32.2.A.5.11 frimware!
xpvijay said:
Hi, excuseme a few days ago I unlock my z3+ dual bootloader and try to root it. But after reboot I see that the x-reality and supervivid mode lost! Also camera freez in video mode and dont record.
Now I want back to my previous status befor rooting my phone. I means factory mode when I bought phone.
What can I do?!!!
In these thread I understand some but I want to be sure.
I must download 32.2.A.0.253 ftf file and flash via flashtools. Then I flash your kernel. I downloaded v3 provided by you, is it true?!
Then boot into recovery and flash kernel again and then do factory reset and wipe dalvick cache and cache and reboot.
I dont want root any more.
Is this method that I mentioned restor my lost drm key? And this lost featured will back?
Please answer me. Thank you so much. Sorry for my bad english.
Note that Im on 32.2.A.5.11 frimware!
Click to expand...
Click to collapse
FIRST, IF YOU DID NOT BACKUP YOUR DRM KEYS(TA PARTITION BACKUP) , THEY ARE LOST FOREVER
You need root, to restore the emulated DRM, some rooted kernels already have drm fix in them.
i'll explain, since your bootloader is already unlocked.
1. Download and instal the latest 32.2.A.5.11 firmware via flashtool
2. boot in fastboot and flash the kernel in the link below(update 4), it has trwp drm fix, rootable, dm verity.
3. http://forum.xda-developers.com/xpe...rnel-ric-disable-twrp-root-dm-verity-t3417078
4. Enter TRWP (spam vol up when sony logo appears), flash latest SU ( https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip )
5. You are all done, xreality works and most of the stuff linked to drm like bionz etc
Have fun~
zemetal said:
FIRST, IF YOU DID NOT BACKUP YOUR DRM KEYS(TA PARTITION BACKUP) , THEY ARE LOST FOREVER
You need root, to restore the emulated DRM, some rooted kernels already have drm fix in them.
i'll explain, since your bootloader is already unlocked.
1. Download and instal the latest 32.2.A.5.11 firmware via flashtool
2. boot in fastboot and flash the kernel in the link below(update 4), it has trwp drm fix, rootable, dm verity.
3. http://forum.xda-developers.com/xpe...rnel-ric-disable-twrp-root-dm-verity-t3417078
4. Enter TRWP (spam vol up when sony logo appears), flash latest SU ( https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip )
5. You are all done, xreality works and most of the stuff linked to drm like bionz etc
Have fun~
Click to expand...
Click to collapse
can u tell me how to restore ta backup
xpvijay said:
can u tell me how to restore ta backup
Click to expand...
Click to collapse
question is, did you make a ta backup before unlocking your bootloader?
if the answer is no, do not ever try to restore the ta backup of another phone, DRMs are unique, your phone will be permanently bricked.
Yes I have backed up ta using this tool http://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
can u tell me how to restore??
xpvijay said:
Yes I have backed up ta using this tool http://forum.xda-developers.com/crossdevice-dev/sony/universal-dirtycow-based-ta-backup-t3514236
can u tell me how to restore??
Click to expand...
Click to collapse
in flashtool, go advance mode, then restore
p.s: am not responsible if anything goes wrong.
TWRP needed
Many people still have problems with bringing the device back to the ROM and Recovery stock, so once and for all I decided to make a simple post guide:
This is the backup.
https://mega.nz/#F!dQJAAJiT!9GCaOUGCjiahuNBkEbKIZQ
ONLY FOR P8 LITE 2017 [PRA-LX1C55] (but you can try with another branded or unbranded same device)
I do not feel responsible for any problems.
1: Put the ''BACKUPS'' folder in a new folder called ''TWRP'' in external_sd then reboot to TWRP.
2: In TWRP; Wipe cache and Dalvik cache, data and system. (Also Vendor if it was previously flashed)
3: Click on the restore option and select the backup; swipe and wait. When the installation finishes in my case, if an error appears you do not have to worry, you only need this backup to restore the original ROM and recovery after with eRecovery.
4: Reboot the device and when it shows the ''initial unlocked bootloader screen'', press vol +; it boot on eRecovery.
5: In eRecovery, if it shows erase data click on it firstly, if not, click directly on download and install fw and rom on the first option.
6: Insert your wifi password, and wait for the download of rom and recovery . An Italian TIM Branded c55b105 will be downloaded .
Installation performs automatic recovery, and twrp recovery will be overwritten.
Do not worry if you restart a couple of times, if all goes well you will have to wait for the device to boot and everything will be restored, if you want, you can also relock the bootloader.
I hope I can solve your problem:laugh::laugh::laugh:.
you are awesome!
you saved me! thanks!!!!!!:good::fingers-crossed:
SandXFX said:
you saved me! thanks!!!!!!:good::fingers-crossed:
Click to expand...
Click to collapse
Fr0nK said:
Click to expand...
Click to collapse
can someone give me a stock bakcup for pra-lx2
dazokevin28 said:
can someone give me a stock bakcup for pra-lx2
Click to expand...
Click to collapse
None here has lx2 version sorry , but you can also try this guide to back stock fw (without download lx1 fw obv)
GreenScreen problem
Hello, tried to perform that solution, but encounter a major problem.
In 2nd point I did wiped the Vendor as well (cause was using the haky's LinOS 14.1 previously);
then restored files from your backup (get warning "createTarFork() process ended with ERROR=255" at the end), and reboot.
Then some wierd stuff shows up - instead of any Huawei logo or unlocked bootload screen - I've got GreenScreen witch 2 rectangles (Blue&Red).
But it enters eRecovery; so yet without any worries tried to start recovery over there - "Getting package info failed" made that impossible.
And now I'm bricked a little bit - cause can not enter TWRP, can not flash the TWRP again, only thing that is possible - the eRecovery mode.
Anyone have any ideas how ot unbrick it?
<!-- Edit -->
Sorry for troubles, as just realized the steps made my phone locked again, so "fastboot oen unlock [...]" it again, and now everything is like before.
<!-- Edit2 -->
Already installed SlimOS and everything seems just fine. Therefore the spectacular GreenScreen still showing up every rebooting, even though I did wiped eveything (every single position) in TWRP since then. x)
Would be greatfull for any informations about this phenomenon.
Sixter said:
Hello, tried to perform that solution, but encounter a major problem.
In 2nd point I did wiped the Vendor as well (cause was using the haky's LinOS 14.1 previously);
then restored files from your backup (get warning "createTarFork() process ended with ERROR=255" at the end), and reboot.
Then some wierd stuff shows up - instead of any Huawei logo or unlocked bootload screen - I've got GreenScreen witch 2 rectangles (Blue&Red).
But it enters eRecovery; so yet without any worries tried to start recovery over there - "Getting package info failed" made that impossible.
And now I'm bricked a little bit - cause can not enter TWRP, can not flash the TWRP again, only thing that is possible - the eRecovery mode.
Anyone have any ideas how ot unbrick it?
<!-- Edit -->
Sorry for troubles, as just realized the steps made my phone locked again, so "fastboot oen unlock [...]" it again, and now everything is like before.
<!-- Edit2 -->
Already installed SlimOS and everything seems just fine. Therefore the spectacular GreenScreen still showing up every rebooting, even though I did wiped eveything (every single position) in TWRP since then. x)
Would be greatfull for any informations about this phenomenon.
Click to expand...
Click to collapse
unfortunately I have not encountered this problem
to restore the phone check here
https://forum.xda-developers.com/p8...uide-unbrick-huawei-p8-lite-2017-pra-t3713574
regards
Plz upload as a single zip, not a whole folder on mega .
Can someone give me a stock back up for PRA-LX1C432B### Single Sim please and thanks
Fr0nk0 said:
TWRP needed
Many people still have problems with bringing the device back to the ROM and Recovery stock, so once and for all I decided to make a simple post guide:
This is the backup.
https://mega.nz/#F!dQJAAJiT!9GCaOUGCjiahuNBkEbKIZQ
ONLY FOR P8 LITE 2017 [PRA-LX1C55] (but you can try with another branded or unbranded same device)
I do not feel responsible for any problems.
1: Put the ''BACKUPS'' folder in a new folder called ''TWRP'' in external_sd then reboot to TWRP.
2: In TWRP; Wipe cache and Dalvik cache, data and system. (Also Vendor if it was previously flashed)
3: Click on the restore option and select the backup; swipe and wait. When the installation finishes in my case, if an error appears you do not have to worry, you only need this backup to restore the original ROM and recovery after with eRecovery.
4: Reboot the device and when it shows the ''initial unlocked bootloader screen'', press vol +; it boot on eRecovery.
5: In eRecovery, if it shows erase data click on it firstly, if not, click directly on download and install fw and rom on the first option.
6: Insert your wifi password, and wait for the download of rom and recovery . An Italian TIM Branded c55b105 will be downloaded .
Installation performs automatic recovery, and twrp recovery will be overwritten.
Do not worry if you restart a couple of times, if all goes well you will have to wait for the device to boot and everything will be restored, if you want, you can also relock the bootloader.
I hope I can solve your problem:laugh::laugh::laugh:.
Click to expand...
Click to collapse
thanks for your tread it's very helpfully but i flashed the oeminfo only without restore everything just the oeminfo backup i changed in img mode and i flashed with twrp and done. I reboot to eRecovery mode, connect to WiFi and done i installed the firmware pra-lx1c55b105 with success TIM firmware
thanks for your great job ?
jalel25 said:
thanks for your tread it's very helpfully but i flashed the oeminfo only without restore everything just the oeminfo backup i changed in img mode and i flashed with twrp and done. I reboot to eRecovery mode, connect to WiFi and done i installed the firmware pra-lx1c55b105 with success TIM firmware
thanks for your great job
Click to expand...
Click to collapse
Nice to hear. :fingers-crossed:
So... i recently tried to flash lineage os bug changing the format of the partition corrupted my data partition.
I managed to boot the system, but without sound, camera, and the nfc tag is going on and off.
How can i get rid of it and get back to REAL stock?
What works:
-TWRP
-Fastboot
What I already tried:
-The unbrick method from haky and chinhon. -> still landing in a rom with these bugs
-extracting system,recovery,boot from update.app and flashing it with fastboot -> doesn't start at all
-flashing update.zip -> data error
force upgrade update.app -> stops at 5%
Some information about the device:
Rooted: no
unlocked bl: yes
Please help me :crying:
Firstly flash stock recovery and try making a factory reset
Then if you will boot into os, download app called Firmware Finder and download firmware PRA-LX1C432B175 using in-app proxy
You can also try using eRecovery to restore your device
If that fails download the service unbrick firmware from here: http://androidhost.ru/K5 , extract it and put dload folder on the root of an sdcard (sd card should be 8bor more). Insert sdcard into tye phone and on phone powered off hold volume up + volume down+ power. When you see huawei logo let go of the power button but keep holdiing volume up + volume down until you see emui logo
The update process will start.
Hope i helped
unbrick solution
Pupskartoffel said:
So... i recently tried to flash lineage os bug changing the format of the partition corrupted my data partition.
I managed to boot the system, but without sound, camera, and the nfc tag is going on and off.
How can i get rid of it and get back to REAL stock?
What works:
-TWRP
-Fastboot
What I already tried:
-The unbrick method from haky and chinhon. -> still landing in a rom with these bugs
-extracting system,recovery,boot from update.app and flashing it with fastboot -> doesn't start at all
-flashing update.zip -> data error
force upgrade update.app -> stops at 5%
Some information about the device:
Rooted: no
unlocked bl: yes
Please help me :crying:
Click to expand...
Click to collapse
Hi, recently I suffered from a softbrick as well.
I followed this procedure https://www.android-hilfe.de/forum/...a-lx1c432b182-emui-5-01-android-7.858545.html
and VERY IMPORTANT! the procedure only worked when I repeated the bootloader unlock in fastboot (fastboot oem unlock "your unlock code") after following the procedure which finally caused a factory reset. Hope it works for you as well!
:fingers-crossed:
P.S.: I think it only works with a rooted device
https://forum.xda-developers.com/p8...-to-root-huawei-p8-lite-2017-android-t3582179
Pupskartoffel said:
So... i recently tried to flash lineage os bug changing the format of the partition corrupted my data partition.
I managed to boot the system, but without sound, camera, and the nfc tag is going on and off.
How can i get rid of it and get back to REAL stock?
What works:
-TWRP
-Fastboot
What I already tried:
-The unbrick method from haky and chinhon. -> still landing in a rom with these bugs
-extracting system,recovery,boot from update.app and flashing it with fastboot -> doesn't start at all
-flashing update.zip -> data error
force upgrade update.app -> stops at 5%
Some information about the device:
Rooted: no
unlocked bl: yes
Please help me :crying:
Click to expand...
Click to collapse
Hy, take a look HERE That's worked for us
Okay thank you guys but i managed it on my own and here is the solution:
I used chinhons backup and put in on my external sdcard. Then I tried to restore it, but it failed at restoring the data partition. So I changed the filesystem from /data from f2fs to ext4 and back to f2fs. Then I restored his backup ( 2017-12--PRA-LX1C432B182-stock-su_root) without problems. Then, I restored the cust and oeminfo partition from my own backup and the rom booted without problems. (NFC worked,sound worked and camera worked). Hope over people can fix their phone like this and a big thumbs up to all of you who tried to help me
Pupskartoffel said:
Okay thank you guys but i managed it on my own and here is the solution:
I used chinhons backup and put in on my external sdcard. Then I tried to restore it, but it failed at restoring the data partition. So I changed the filesystem from /data from f2fs to ext4 and back to f2fs. Then I restored his backup ( 2017-12--PRA-LX1C432B182-stock-su_root) without problems. Then, I restored the cust and oeminfo partition from my own backup and the rom booted without problems. (NFC worked,sound worked and camera worked). Hope over people can fix their phone like this and a big thumbs up to all of you who tried to help me
Click to expand...
Click to collapse
cleverle
Please never ask the community before you tried all your own ideas - if not, you might be stealing (not only wasting) other peoples time...
aciupapa said:
Firstly flash stock recovery and try making a factory reset
Then if you will boot into os, download app called Firmware Finder and download firmware PRA-LX1C432B175 using in-app proxy
You can also try using eRecovery to restore your device
If that fails download the service unbrick firmware from here: http://androidhost.ru/K5 , extract it and put dload folder on the root of an sdcard (sd card should be 8bor more). Insert sdcard into tye phone and on phone powered off hold volume up + volume down+ power. When you see huawei logo let go of the power button but keep holdiing volume up + volume down until you see emui logo
The update process will start.
Hope i helped
Click to expand...
Click to collapse
This only works with the following firmware versions:
PRA-LX1C432B175
PRA-LX1C432B165
PRA-LX1C432B129
PRA-LX1C432B125
KuGeSch said:
Please never ask the community before you tried all your own ideas - if not, you might be stealing (not only wasting) other peoples time...:
Click to expand...
Click to collapse
Bad and useless answer
Hello !
After a wrong manipulation with TWRP, my OS got wiped ( i think ?)
Stuck in a boot loop (phone doesn't want to shutdown) with :
Code:
ERROR MODE :
[COLOR="Red"]Attention !
Please update system again[/COLOR]
[[COLOR="Lime"]Android buddy[/COLOR]]
[COLOR="Red"]Error !
Func NO : 11 (recovery image)
Error NO : 2 (load failed)[/COLOR]
I'm still able to got the fastboot menu (i am fully unlocked) but nothing else (no twrp, no erecovery or whatever)
and i already tried to flash a custom recovery, kernel img, system img, recovery_ramdisk... with FASTBOOT and even with the multi tool... but nothing happens (maybe i do it wrong ?)
I got a VTR-L09 8.0.0.386(C432)...
Help me buddies, i don't know what to do...
(Sorry for my bad english, i tried to be clear )
Tried this method
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Necrodaemon said:
Tried this method
https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Click to expand...
Click to collapse
Hi ! Thanks for sharing this method !
i tried a couples of time but when it come to install recovery, i got an error at 99% (Recovery Failed)
Any idea ?
bump!
Had the same problem a few month ago...
If you have bootloader unlock, first flash TWRP!
Then take a look at @Jannomags tutorials in the forum here, depends on which FW you like to install (Pie or Oreo)...
I did tutorial "updating to pie" and it worked for me, finally latest Pie Firmware was installed!
Hey, I got the same issue but I don't have access to fastboot anymore, what should I do?
kamesaito said:
Hello !
After a wrong manipulation with TWRP, my OS got wiped ( i think ?)
Stuck in a boot loop (phone doesn't want to shutdown) with :
Code:
ERROR MODE :
[COLOR="Red"]Attention !
Please update system again[/COLOR]
[[COLOR="Lime"]Android buddy[/COLOR]]
[COLOR="Red"]Error !
Func NO : 11 (recovery image)
Error NO : 2 (load failed)[/COLOR]
I'm still able to got the fastboot menu (i am fully unlocked) but nothing else (no twrp, no erecovery or whatever)
and i already tried to flash a custom recovery, kernel img, system img, recovery_ramdisk... with FASTBOOT and even with the multi tool... but nothing happens (maybe i do it wrong ?)
I got a VTR-L09 8.0.0.386(C432)...
Help me buddies, i don't know what to do...
(Sorry for my bad english, i tried to be clear )
Click to expand...
Click to collapse
I have the same problem, please help!