Related
Here I compiled list of question and answer about using TomTom 6 with the HTC Kaiser. Forum Mods, if this is good enough, please make it sticky topic.
*** Which version of TomTom is in the Application CD?
6.032 (8351) - as of September 15, 2007
*** Is that full version or trial version?
It is called TomTom Taster Edition and It is full version, it will not expired, and there is no feature limitation compared to retail version.
*** Is it installed in the ROM by default?
No, it is not. You need to manually install it.
*** How to install it?
Connect to ActiveSync, from the HTC Kaiser Application CD, launch:
Installer_Kaiser_ttn_6_032_8351_HTC_WWE_20070716.EXE
*** I dont have that executable file in my HTC Kaiser Application CD!
Yes, you are not alone, probably you purchased North America version.
http://forum.xda-developers.com/showthread.php?t=329957
http://forum.xda-developers.com/showthread.php?t=327917&page=2
You can also download it here:
http://rapidshare.com/files/56585274/6_032_8351.rar (this link might not be permanent)
Or here (.CAB):
http://www.sendspace.com/file/9379xf (this link might not be permanent)
*** I have TomTom 6.030 (or prior version), what's the main difference?
6.032 has "Built-in Internal GPS" setting and the HTC Kaiser also have one.
*** Can I use/install other maps?
Yes you can. You can purchase additional maps (maps only), and then activate it.
*** Warning! Do not change the external GPS setting!
You should see "external GPS" icon in the Settings->System, do not change anything there.
You might need to hard-reset your device, more info:
http://www.modaco.com/word-warning-re-GPS-se-t258943.html
*** How can I use my own TomTom software?
So, you do not want to use TomTom from the Application CD.
Basically, you just need to install your own TomTom software and use this setting for the GPS:
- Other NMEA GPS receiver
- GPS baud rate = 4800
- GPS is connected to COM4:
For detailed information, check out here:
http://www.modaco.com/TomTom-Kaiser-t256790.html
*** How good is the internal GPS? Any problems?
From my own experience, it is working fine. Signal strength may vary and it depends on the situation (cloudy, clear sky, surounding area, buildings, etc.).
On average, I got satellite fix around 30 - 60 seconds.
However, some people experienced problems which you can follow here:
http://www.modaco.com/GPS-positioning-problems-t259285.html
Paul from MoDaCo.com, reported a bug
"The GPS bug seems to occur with some applications whereby the GPS 'data stream' will pause for a few seconds at a time, which makes some apps think the GPS has gone away (e.g. Google Maps) and other apps just update in sudden jumps rather than smoothly."
http://www.modaco.com/Paul-Reviews-HTC-P45-t256569.html
But, I think that problem is intermittent (randomly occur).
*** How about TomTom PLUS service?
Check out here:
http://forum.xda-developers.com/showthread.php?t=328444
*** TomTom always start with NO SOUND, why?
It's a bug, you have to switch off the data connection before starting TomTom.
SIMPLE FIX: Roll the volume wheel and sound turns on.
Thanks to all XDA-Dev users, Paul and other users from MoDaCo.com
Feel free to add more information in here
I added this thread to the wiki.
The above is all good info.
However, if you are having problems do not believe that the above is the only setup that will work.
I happen to use a bluetooth setup from time to time and have used the external GPS settings without problems.
A working setup for me for intermal GPS uses Other NMEA on COM 9 at a Baud Rate of 19200. In the Tomtom settings.
All other GPS programmes I use are set to COM9
When I setup the bluetooth I have it set to:
Serial Port (ticked)
Outgoing Port COM 9
Authentication (unchecked)
External GPS (in System menu)
(Perform a full backup before changes here - due to reports that changes here may ruin the GPS connection requiring a hard-reset to get it going again)
GPS Programme Port COM9
Hardware (None)
Access (Manage GPS automatically - ticked)
By the way the basic freeware plotting applications I use DO NOT require the clumsy workaround of starting tomtom in order to open the internal GPS. That problem seems to be limited to an issue with Google Maps.
NB
Other ports will work - eg COM0 but you must ensure that for example if you set outgoing port in bluetooth (if you also use BT GPS) to COM0 then it will also be COM0 in tomtom or any other GPS software. Any mismatch and you'll wait forever!
NB
In the tomtom satellite screen (the one that shows aseries of columns for each satellite - there is a useful verbal comment at the top of the screen it will say one of three things:
1
No GPS Device - (always says this initially for 2/3 seconds. If things are set correctly it will move to 2 but if your ports are wrongly set it will stay on this)
2
No Valid GPS Signal - (means it has found internal GPS device and is trying to find satellites - anything from 2 or 3 seconds to couple of minutes if you have not used Quick GPS, it will then move to 3 if you are in range of satellites)
3
Other NMEA GPS Receiver - (says this when locked on to satellites and working correctly)
The above 3 steps are useful to just check whether the setup and port is correct. Even if you do not want to use tomtom it's worth running it at least once just to iron out any port problems.
Mike
gogol said:
*** Can I use/install other maps?
Yes you can. You can purchase additional maps (maps only), and then activate it.
Click to expand...
Click to collapse
How?
I copy the folders of others maps into the microsd, bit if i go to settings- change maps I can't see them! Then i can't put the code to activate them!
What i'm doing wrong?
teresa said:
How?
I copy the folders of others maps into the microsd, bit if i go to settings- change maps I can't see them! Then i can't put the code to activate them!
What i'm doing wrong?
Click to expand...
Click to collapse
Use TomTom HOME program to install maps.
Richard
Thanks, very good thread indeed.
gogol said:
*** I dont have that executable file in my HTC Kaiser Application CD!
Yes, you are not alone, probably you purchased North America version.
You can also download it here:
http://rapidshare.com/files/56585274/6_032_8351.rar (this link might not be permanent)
Click to expand...
Click to collapse
Tried to install this 6.032 version on my TyTN II but got the following error on the device upon starting the installation: "Setup Error: Unable to install application. Please update your device ROM to the required version before trying again." - any ideas? Thanks ...
Would be happy to pay for the software / maps if they wouldn't it make all that difficult to get it installed for a trial ...
Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?
trjons said:
Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?
Click to expand...
Click to collapse
Are you sure u installed 6.032 Tom Tom release? Is the version caming with CD and is not in Tom Tom web. Is the only version that works with internal GPS; but youet guy. can have problems to install it, if you have a previous version.
There is no "internal GPS" icon in the "Settings", only "external GPS"
And dont mess around with the "external GPS", you might need to hard-reset.
TomTom 6.032 has its own setting to use the "internal GPS".
trjons said:
Maybe this is a dumb question, but I can't get the On board GPS to kick up and when I look under settings, the only thing there is "External GPS"....
How do you get it to use the internal GPS?
Click to expand...
Click to collapse
galahor said:
Are you sure u installed 6.032 Tom Tom release? Is the version caming with CD and is not in Tom Tom web. Is the only version that works with internal GPS; but youet guy. can have problems to install it, if you have a previous version.
Click to expand...
Click to collapse
I would disagree with that. Other versions of tomtom DO work. But in tomtom's "configure" select other NMEA instead of internal GPS
Mike
mikechannon said:
I would disagree with that. Other versions of tomtom DO work. But in tomtom's "configure" select other NMEA instead of internal GPS
Mike
Click to expand...
Click to collapse
I agree. I wanted say is the only version capable to tune internal GPS from Tom Tom program. I know versions 6, 6.02 and 6.03 works with othen NMEA and port 4, but my impresion is with internal get satellites faster.
Is there a way for TomTom to give the vocal instruction through the Bluetooth headset ?
Thanks
Jean-Yves
Anyone get a wrong rom error when installing 6.032? UK T-Mob.
Yes me too
As I understood, the T-Mobile version does not have TomTom Taster edition included in the application CD, correct???
If that's the case, I am afraid that the TomTom 6.032 from the HTC Kaiser "unlocked" version is a special build only for that unlocked model.
Just use 6.030, it works fine (read in the FAQ).
Yeah i guess if the rom numbers dont match up, it wont let you install. Not on Taster CD.
Using 60.30 now 8)
No TOMTOM love...
My Kaiser just showed up today and there' no TOMTOM on the apps cd.
What gives?
helm
I installed the Tom Tom and the one free Map, but I still have the same issue I had with Google maps of having to run GPS Viewer to start up the GPS.
I'm sure its a configuration issue for Tom Tom but I can't figure out what the problem is.
You got problem with Google maps and you thought that is TomTom configuration issue? ...
trjons said:
I installed the Tom Tom and the one free Map, but I still have the same issue I had with Google maps of having to run GPS Viewer to start up the GPS.
I'm sure its a configuration issue for Tom Tom but I can't figure out what the problem is.
Click to expand...
Click to collapse
When I was using TT6, I was able to get my local weather. Now, with TT7, it says it's not available in my region (yet). Anyone else getting this?
DJ Hellfire said:
When I was using TT6, I was able to get my local weather. Now, with TT7, it says it's not available in my region (yet). Anyone else getting this?
Click to expand...
Click to collapse
Weather working fine on TT7 for me
Where do you live? I'm in NJ.
Works in California.
works in Bloomington, IN...
So you guys just installed the program normally and it just worked?
doesn't work in montgomery, alabama
Weird! Wonder what it is!
Works in Cleveand Ohio
But doesn't 'region' mean US? For example, over seas DVD's have different region codes than US. Am I correct?
works fine all over MD
DJ Hellfire said:
When I was using TT6, I was able to get my local weather. Now, with TT7, it says it's not available in my region (yet). Anyone else getting this?
Click to expand...
Click to collapse
where did u guys get TT7 from?
i cant find it anywhere
a small advice about how i can get it is enough
b1prabu said:
where did u guys get TT7 from?
i cant find it anywhere
a small advice about how i can get it is enough
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=401679
Anyone who had the issue of not getting TomTom Plus to work ever find a solution? As with the OP, TomTom Plus (traffic, weather, etc.) worked for me in TT6, but in TT7, I get that same message saying that the service is not supported in my region (yet). I'm based in Northern California and I'm currently using the USA map that I just bought from TomTom.
work in uk
I had the same issue and after some consternation and trial and error, found that when I deleted the entire TT6 app including xml's dats etc., before installing TT7 I got that error about it not being available... I reinstalled TT6, then installed TT7 then uninstalled the TT6 app only and left the folders alone,now I get weather, traffic (2-day trial) and buddies. Must have something to do with the tt6 files that were originally tied to my Tilt. Did notice however that the key is different for TT7 than TT6 and since I had to replace my Tilt in the past 6 months-TomTom only allows changing the key once in 6 months and tells me to contact support which I am leery of since TT7 isn't native to the Tilt. Not a programmer, so not sure but seems to me that the TT6 files had something to do with it.
I tried what Alemaker suggested and had everything working with TT6, but when i tried to copy the files to TT7, nothing worked. At first, TT7 recognized my username from TT6, but i had to go into "edit account info" to use the other Plus services, and i got the same old error message. And, of course, my username went back to "anonymous".
has anyone gotten any plus services to work with TT7 and the USA maps in the US? i'm starting to think TT6 and TT7 might use different servers. (BTW, i went to TomTom and they said traffic was still in beta in the US - so they gave me a 3 month trial.)
has anyone tried to update via wifi and see if it works?
Funny thing is that it worked for me one time and then when I switched roms it stopped working.
Works fine in Northern Virginia, Washington D.C and the rest of the metropolitan area.
Try upgrading the weather in the TT7 settings within the program...and connect to the TT7 services tab in the application before you try to run the weather...that should fix it. look for and Sign in to the "TT service" icon thats in the options tabs..not the TT website though..theres a tab for it in the prefrences/settings tab underneath the "navigate to" option it will be there somewhere. After your in the TT services it should ask you if you want the weather option as well. If you dont have a TT account youll need to make an account..but u must be connected to the net on your tilt when the TT7 software is running because without internet you wont be able to connect to the TT services and weather function. So to make a TT account email, go to the www.tomtom.com or wutever web page through your tilts browser, make yourself an account email and redo all the instructions up top plus hard reset after you login with your new account and sign in inside the TT7 services and weather services again..that should and will make your weather work. Repeat the steps once youve connected to the TT services throughh a internet connection within the TT7 app
Anyone in NJ that has TT7 and Plus Services working
Been slumming the web and it seems the TT7 and Plus Services not working seems to be concentrated in NJ/NY... Just curious.. anyone in this area that has Plus Services working with TT7?
Having found and read the threads I can on the subject, I want to install Tomtom 7 (tt7) on my Diamond (I purchased the phone whilst on a trip to HK and it didn't have it installed), and to hook it up to Tomtom Home on my pc to purchase maps over and above the taster maps.
I've loaded the application cab from a thread on the Kaiser forum (which most people seem to agree is not Warez), and downloaded TT home 2.3 from the tomtom website. Have got the free taster map, but now want to buy more maps. However, I don't seem to be able to get Home to talk to my device.
From reading the threads, it's suggested to move the application from "Intern Gegeugen" (where it installs), to the Program Files folder. However, doing this breaks all the shortcuts.
Can anyone either provide a cab for the application that installs to the right place, or give me some step by step pointers how to get it all working? Would really appreciate the help!
Oh - and should anyone from Tomtom chance upon this post, the sooner you get your website and Home explicitly working for TT7, the faster I'm sure people like me would actually be buying your products- seems you've done the hard part of actually developing the software, just not making it easy for people to buy it right now!
That's interesting about moving the install folder... I haven't tried that. What I did do though was to uninstall Home 2.3 as I encountered the same problem and install Home Navigator 1.5. From there, you can just purchase maps of your choice. You need to link the device to a 'GO' device as they are the only models using version 7 software.
Hope this helps
raveydavy said:
Having found and read the threads I can on the subject, I want to install Tomtom 7 (tt7) on my Diamond (I purchased the phone whilst on a trip to HK and it didn't have it installed), and to hook it up to Tomtom Home on my pc to purchase maps over and above the taster maps.
I've loaded the application cab from a thread on the Kaiser forum (which most people seem to agree is not Warez), and downloaded TT home 2.3 from the tomtom website. Have got the free taster map, but now want to buy more maps. However, I don't seem to be able to get Home to talk to my device.
From reading the threads, it's suggested to move the application from "Intern Gegeugen" (where it installs), to the Program Files folder. However, doing this breaks all the shortcuts.
Can anyone either provide a cab for the application that installs to the right place, or give me some step by step pointers how to get it all working? Would really appreciate the help!
Oh - and should anyone from Tomtom chance upon this post, the sooner you get your website and Home explicitly working for TT7, the faster I'm sure people like me would actually be buying your products- seems you've done the hard part of actually developing the software, just not making it easy for people to buy it right now!
Click to expand...
Click to collapse
Place the contents of "Intern Gegeugen" into My Device/Program Files/Navigator on the Diamond. Connect via Activeynch and finf TomTom Navigator.exe in the above folder. Right click, choose create shortcut and paste that shortcut in My Device/Windows/Start Menu/Programs and rename it accordingly.
And after that you can connect with tomtom home 2.3 (for PDA). First you choose your memory location, get an error, go back and your device is connect.
I've just given that a go and moved the install onto the internal storage. It all still seems to work ok. One question though, other than free up the main memory are there any advantages/disadvantages to running the app from internal storage? (i.e. does it run slower from internal storage etc)
I find if you install TomTom 7 on the internal storage, TomTom home 2.3 comes up with an error, installing it the the internal memory TomTom home picks it up fine.
I have tried the above, but still cannot purchase any maps. when I Click on the maps i just get the message 'No Items Available'
Radeon123 said:
I find if you install TomTom 7 on the internal storage, TomTom home 2.3 comes up with an error, installing it the the internal memory TomTom home picks it up fine.
Click to expand...
Click to collapse
same for me! tomtom home recognices my device but can't really communicate with it.
i use the maps i get with me touchcruise/xda orbit2, they are version 6.75.
connected with tomtom home 1, device can get connect. i used the maps from cdrom and could install them. afterwards i activated the map on my device using my product code card, no problem :-D
Only TT home 1.5 is compatible with Navigator.
What I did was upgrade my TT6 maps to the latest then using TT home transfered the maps to the device and installed TT 7 after. works well
I changed TT6 into TT7 and I could use the same maps. All is working fine.
One question:
TT7 does not get a fix, when phone is not on. I found it today, when I use Tomtom in a car about 10 minutes. I stopped and turned phone on, so Navigator 7 got the fix easily.
I have not agps on.
In Artemis I did not find this kind of symtom with Navigator 6.
i have also tomtom 6 with maps from my o2xda2. i've installed the maps from cd over tomtom home 1.5. it installed successfully. but in tomtom 7 on my diamond i can't still use the maps.. they aren't listed in manage maps?! what do i wtong?!
please help
i don't know, i just installed tt7, not 6, then connected it with tomtom 1.5.
put the cd in and i was capable to install the maps.
yeah... i did the same! all fine! but when i start tomtom on diamond i can't change the maps. i only see the demo-map. you can?
yes, i can. i even never installed the demo map. you know that you have to choose/change map in order to see the right one?
yes i know... but there who i can change the map i see only bern (demo-city-map)!!!
Not being a SatNav user I did this
I am not really a big user of SatNav as I read the signs on the road.
However, I am a lover of toys and have always kept a copy of tomtom nearby for fun.
I installed the XDA linked TT7.cab file (11.9mb) and directed it to Internal Storage.
Then I went online and created myself a tomtom account. I went through the maps purchase wizard stating my device was a GO 720 model.
I then purchased the 7.2 Great Britain and NI Map. £29.95 - even by my standards a bargain.
I then downloaded Home 2.3 and connected my Diamond as a disk system.
When the Diamond came up it challenged me to select the location of my product and I chose Internal Storage. It then promptly through up an error message.
I did a back and continued. When I went to MAPS etc it didn't find my map. So I clicked on the Update Pocket PC icon and there was my map.
It didn't take long to download and install (161 MB ish) and now I have a working TT7 with the 7.2 map.
I could also update the Pocket PC with free voices and POI's too from the TomTom website (although I have forgotten the steps just now).
The advantage is that I have a working, reliable, sexy, copy of Tomtom 7.
The negative is that I don't seem to be able to use MAP share. This is not a big deal for me (as I never actually use Sat Nav anyway!). It didn't seem to matter once I had bought the map what I set the device to be - PDA or GO 720.
I hope that this is useful as a legitimate way of getting Tomtom 7 onto your Diamonds...and all for £29.95.
I have done this twice - once for me to play and once for the missus to actually use.
Not a bit of Warez anywhere - for 30 quid why bother with Warez?
All the best,
Sam.
I tried the above method and HOME 2.3 just said that the map i purchased was not an available device for these maps so the checkbox was greyed out...any ideas...maybe they caught on?
need a response please!
df
sfere1 said:
I tried the above method and HOME 2.3 just said that the map i purchased was not an available device for these maps so the checkbox was greyed out...any ideas...maybe they caught on?
need a response please!
df
Click to expand...
Click to collapse
No it's not a case of have they caught on. TomTom 7 the application on a PDA is not supported on TOMTOM Home 2.3. You need to use 1.5 . This is beacause at the moment only PNA devices are supported on 2.3
The Maps which you purchace to activate with your device to make the application work have not been released yet for PDA so you have to use backwardly compatible maps . 6.75 etc until you can purchase ver 7 maps
As for Warez the licenceing is with the maps only and not the application which is available to download from TomTom . If you was to load hacked Maps then this is WAREZ as the Licence is with the maps. You can only use your brought maps with one device and that is the device you purchaced it for. Hence you get the activation number from your device as it is device specific.
You cannot if you purchased maps already from a different device use them on another device . This is the License law and you need to purchase new maps every time you cahnge device . You can email TomTom support but they will tell you the same thing.
All maps are 30% cheaper at the moment, because they'll release the new version in the beginning of August.
The 30 price reduction is not for Navigator user as I found out last month.
As for only using the Maps for one device (true in a sense) though I managed to activate via TT home my maps twice on my Trintiy (as the Device ID changed once when I flashed an early ROM and activiate the same product code again for my Diamond - which is indicated on the TTcode website as three activations.
I have purchase new 6.75 maps for my Navigator 6 and know these will work on version 7 once on general release.
hi i have navigaon 7 on my diamond , anyone knowhow to make it work with internal gps????
thanks
Simply let it scan for your GPS settings, picked up mine at COM4 (just like the Windows Settings state).
but it says no gps reception, what do you choose from gps settings? where is asks if gps reciever is bluetooth bla bla bla
Take the new release 7.3.1, this one works with the diamond without any registry hacks ...
Download here
how big is the file?
hkr said:
Take the new release 7.3.1, this one works with the diamond without any registry hacks ...
Download here
Click to expand...
Click to collapse
can you upload on here or rs or mu? thanks
hawwy said:
how big is the file?
Click to expand...
Click to collapse
609MB, it includes Maps from Germany, Austria & Switzerland ...
checked and myn iz same version
doesn't work. on the gps status show -1 on the Satellites and -1.0 on HDop
Try attached files. Extract all files into NAVIGON directory (on PPC). In Navigon.mscr set corect path for MobileNavigator.exe and run Navigon.exe. It works for me.
hkr said:
609MB, it includes Maps from Germany, Austria & Switzerland ...
Click to expand...
Click to collapse
Now the full european Try & Buy version is online on Navigons Homepage ...
Any one tried ppc.zip a few posts back ?
Navigon
hawwy said:
hi i have navigaon 7 on my diamond , anyone knowhow to make it work with internal gps????
thanks
Click to expand...
Click to collapse
Change to Duttys rom it worked for me with this, but not with vic diamond or Dia Duit.
also worked with others as I change roms regularly & did not come acsoss the problem until I loaded Dia Duit, which has to be the most convenient one of them all.
Navigon
paddymcc said:
Change to Duttys rom it worked for me with this, but not with vic diamond or Dia Duit.
also worked with others as I change roms regularly & did not come acsoss the problem until I loaded Dia Duit, which has to be the most convenient one of them all.
Click to expand...
Click to collapse
I installed HallengreeN rom last night & Navigon finds GPS immediatly you will find it here
http://forum.xda-developers.com/showthread.php?t=429147
tomiskavac said:
Try attached files. Extract all files into NAVIGON directory (on PPC). In Navigon.mscr set corect path for MobileNavigator.exe and run Navigon.exe. It works for me.
Click to expand...
Click to collapse
Hello this works for me. How could i make that navigon starts in landscape mode using your script?
Reality view works (only in LScape mode)
http://rapidshare.com/files/190389812/PPC.zip.html
paste ppc folder files onto navigon folder, (just copy the files not the whole folde!) and of course edit navigon.mscr in order to have internal storage in the route, where it is (almacenamiento interno) (Spanish)
it turns to landscape and then when you exit the program it returns to vertical. The problem is that backlight remains and duration is toggled to 10s, and you have to fix it everytime after exiting navigon.
Ah something else, i have Landmark_EU_Q4_2008.nxs n landmark directory, but i think reality is not working. How can i check? Landmark_EU_Q3_2008.nfs is also there and has different extension!
thanks!
hi guys.
i just ried to switch landscape for use with MN|7, but i cant get it to work properly. (ROM>AZTOR x2 GER, MN 7.3)
any1 knows if there is a app to assign like "press hangup long" to switch the screen to landscape?
also tried PPC.ZIP and the others, not working.
MN7LS_90.ARM.zip tried one time (with error after launching)
i'll continue on my journey finding the right tool, maybe someone can enlighten me!
and yes, would be nice to have TF3d enabled
i just did this
http://forum.xda-developers.com/showthread.php?t=402767
and can get the reality view option, wich wasnt availible before.
navigon 7
thanks, now i can play around with it.
hawwy said:
hi i have navigaon 7 on my diamond , anyone knowhow to make it work with internal gps????
thanks
Click to expand...
Click to collapse
I used a program called Glopus http://www.glopus.de/glopuscab.php
This app basically simulates a Com Port for navigon to see.
In Glopus :
1. go to Data source drop down menu and choose "COM 9 (Serilot)"
2. Tap on "Configure Serilot" button underneath
3. You will have two more drop down Menues: In the upper one choose "Com 9" in the lower choose "Com 4)
4. click ok
In Navigon:
1. Go to GPS status
2. Tap on settings
3. Choose manual config
4. Select plain GPS device
5. In Ports choose "COM 9"
6. In Baud rate choose 9600
Done.
I hope this is helpful.
Cheers.
HI i need help...i followed the right tuto and everything worked fine, But i had to hard reset my phone and i made a mistake in globus and as this software is in german how can I reset all GPS setting?
Hi all
I installed Tomtom7 yesterday, but could only install the blue version. The black version always failed to install. I have the latest 7.9 version.
I can only start TT via the file explorer the the today shortcut link does not work. It only beeps and that is.
I have also a proper TT account for safety cameras and traffic. when I connetc the PDA I can download pois, cameras etc. However I don't see them in the poi list? In TT home it shows as installed.
When I copy my old TT6 overlays into the map folder the show on the map.
The traffice update and warning work fine however..
Any ideas?
nobody really?
Which ROM are you using?
the standart WM6.1 from HTC.
I have figured out how to create a link and add stuff to the menu by now.
I have also seen a Speedcam on the map and can sync them via tomtom plus service, but still dont see them under any POI menu,...
screetch said:
Hi all
I installed Tomtom7 yesterday, but could only install the blue version. The black version always failed to install. I have the latest 7.9 version.
I can only start TT via the file explorer the the today shortcut link does not work. It only beeps and that is.
I have also a proper TT account for safety cameras and traffic. when I connetc the PDA I can download pois, cameras etc. However I don't see them in the poi list? In TT home it shows as installed.
When I copy my old TT6 overlays into the map folder the show on the map.
The traffice update and warning work fine however..
Any ideas?
Click to expand...
Click to collapse
Call support, I got the sd card and it works perfectly, version 7.910. They send me another card for my other phone FOC.