Database Develop

installing MIUI7 on MI3 through custom recovery cwm

Hi,
I want to install MIUI 7.But currently I am on CM12 with cwm recovery.Can anyone please let me know can I flash MIUI 7 directly.If not let me know how I can proceed.
Thanks

nsakhare said:
Hi,
I want to install MIUI 7.But currently I am on CM12 with cwm recovery.Can anyone please let me know can I flash MIUI 7 directly.If not let me know how I can proceed.
Thanks
Click to expand...
Click to collapse
Xiaomi Developer ROMs are delivered through flashable zips and through fastboot images, maybe look into the second option. Be aware that Xiaomi ROMs might replace the Recovery upon boot, if that isn't included in the fastboot image already, which I think is likely, and take a look into potential partitioning hazards.
Edit: To be extra helpful, here's the thread http://en.miui.com/thread-149081-1-1.html

I failed while flashing miui 7 stable on cwm r11, btw miui 6 worked for me everytime even on extended partition.
So I'd say no
hope this helped you

Fikshun said:
I failed while flashing miui 7 stable on cwm r11, btw miui 6 worked for me everytime even on extended partition.
So I'd say no
hope this helped you
Click to expand...
Click to collapse
Stable version will not work in extended partition. Only developer version will work. I think so

24likan said:
Stable version will not work in extended partition. Only developer version will work. I think so
Click to expand...
Click to collapse
I'm currently on Miui 6.7.1.0 stable china rom on extended partition it worked for me

I am miui 7 global stable, i flashed with twrp on extended partition without problems.

slavke1976 said:
I am miui 7 global stable, i flashed with twrp on extended partition without problems.
Click to expand...
Click to collapse
really cuz twrp failed me everytime
which version of twrp are you using

Yes really, twrp is version 2.8.5.0 . To repartition i used cwm recovery, then i changed to twrp.
When i tried to flash miui v6 with twrp i failed, then i changed to cwm recovery, and then i flashed. Try like this if twrp makes failed flashing.

slavke1976 said:
Yes really, twrp is version 2.8.5.0 . To repartition i used cwm recovery, then i changed to twrp.
When i tried to flash miui v6 with twrp i failed, then i changed to cwm recovery, and then i flashed. Try like this if twrp makes failed flashing.
Click to expand...
Click to collapse
what about miui 7 did you flash it with cwm too

I also faced same issue, I found workaround for it from MIUI forums.
1) Go to recovery and wipe all (except internal storage)
2) Flash MIUI rom
3) You will get error, now just go to reboot and select recovery
4) flash rom again (without wiping) and it should work
Using latest TWRP

pra300 said:
I also faced same issue, I found workaround for it from MIUI forums.
1) Go to recovery and wipe all (except internal storage)
2) Flash MIUI rom
3) You will get error, now just go to reboot and select recovery
4) flash rom again (without wiping) and it should work
Using latest TWRP
Click to expand...
Click to collapse
did you try the above steps on TWRP?
and does it work on extended partition

Yes twrp-2.8.7.0
I am on stock partition now. I think it should work with extended partition as it worked for me in the past when I tried MIUI 6. Its only the update which you will need to flash using recovery. Give it a try.

Yes i flashed with twrp recovery, it was working. First i flashed stable miui v7, then i reflashed with stable rooted version of miui v7 stable. so 2 times flashed v7 with twrp on extended partitions. I have mi4. but it should work as it is cancro

slavke1976 said:
Yes i flashed with twrp recovery, it was working. First i flashed stable miui v7, then i reflashed with stable rooted version of miui v7 stable. so 2 times flashed v7 with twrp on extended partitions. I have mi4. but it should work as it is cancro
Click to expand...
Click to collapse
alright I'll try it out

pra300 said:
Yes twrp-2.8.7.0
I am on stock partition now. I think it should work with extended partition as it worked for me in the past when I tried MIUI 6. Its only the update which you will need to flash using recovery. Give it a try.
Click to expand...
Click to collapse
thanks bro it worked for me I successfully flashed Stable Miui 7 on extended partition through trwp just as you mentioned

Wouldn't flashing the fastboot image file through MI suite work? I am also on cm12.1 but would like to switch back to miui 7 developer versions. I thought a simple fastboot image flash should work

aces170 said:
Wouldn't flashing the fastboot image file through MI suite work? I am also on cm12.1 but would like to switch back to miui 7 developer versions. I thought a simple fastboot image flash should work
Click to expand...
Click to collapse
what if i don't have a PC

Fastboot method for fast and clean install.. not sure if flashing miui rom thru twrp/cwm will work..

twist9 said:
Fastboot method for fast and clean install.. not sure if flashing miui rom thru twrp/cwm will work..
Click to expand...
Click to collapse
i suddenly got bootlop on Cm12.1, didnt do anything to my mi3 it just happen
so i decided to flash again, worked and boot up and few minutes it bootloop again
switch to miui7 and flash using miflash to get clear of everything but,
i got unspecified error (0x80004005:FAILED) (remote sized too large)
while flashing using miflash
any suggestion how to unbrick this??
BTW im on extended partition

vranxzs said:
i suddenly got bootlop on Cm12.1, didnt do anything to my mi3 it just happen
so i decided to flash again, worked and boot up and few minutes it bootloop again
switch to miui7 and flash using miflash to get clear of everything but,
i got unspecified error (0x80004005:FAILED) (remote sized too large)
while flashing using miflash
any suggestion how to unbrick this??
BTW im on extended partition
Click to expand...
Click to collapse
restore to stock partition and try it should work

Xiaomi mi 8 se doesn't want to run any ROM

Hi, I've unlocked my xiaomi mi 8 se bootloader and i try to flash twrp recovery and xiaomi.eu rom, but every time i reboot the device he goes in bootloop and when i try to turn off the device and to acess the recovery, the device goes in bootloop. So every time I have to reinstall the recovery and then the ROM again. But for every recovery and rom i tried the device goes in bootloop. I tried every twrp on the forum and also some Rom but the device doesn't want turn on. Can you help me, pls? thanks and sorry for my english

You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.

or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14

luigieg said:
You need to format data in twrp, reboot to recovery in twrp, do a factory reset then flash eu rom.
Click to expand...
Click to collapse
i do, but the phone doesn't want to turn off

kakiyomi said:
or use this twrp https://forum.xda-developers.com/showpost.php?p=78047648&postcount=14
Click to expand...
Click to collapse
i already use this twrp, this time it has not been canceled

CH4nt0 said:
i already use this twrp, this time it has not been canceled
Click to expand...
Click to collapse
I had also bootloop problem but got it working with this twrp https://drive.google.com/file/d/1X39kp3oBz-SYD-fNK-uEgD6VlUUG-WMq/view
1. Boot twrp
2. Wipe -> format data then reboot, transfer rom to device, enter to fastbootmode and boot twrp again
3. install rom and after that wipe dalvik and cache
4. now it should work
The rom what i installed was xiaomi eu stable

i found another twrp and now i have xiaomi.eu dev, thanks for the help

CH4nt0 said:
i found another twrp and now i have xiaomi.eu dev, thanks for the help
Click to expand...
Click to collapse
what twrp?

I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?

shanty23 said:
I installed the twrp mentioned by maketzu111. Then I wiped data. Then rebooted into the twrp
Then I flashed "xiaomi.eu_multi_MI8SE_V10.0.1.0.OEBCNFH_v10-8.1.zip" from the miui 10.1 stable sourceforge page. It is stuck on the mi splash-logo for a very long time. what's happening?
Click to expand...
Click to collapse
You did format the data? What i have read it's the main reason why device goes bootloop if you didn't do that. Rom isn't installed properly if the device stuck to bootloop or in this case stucks to loading screen

OnePlus 3T Android 9 Pie Decryption unsuccessfull

Dear xda members,
I recently installed the Oxygen stable 9.0.2 on OnePlus3T
The phone was unlocked, rooted and with twrp 3.3.0-1 installed
During first boot after installation, I received this error:
Decryption unsuccessfull
The password you entered is correct, but unfortunately your data is corrupt
The only way to continue is a factory reset (but I would like another way, if possible).
I was able to revert to Oxygen stable 5.0.8, but the error persist.
Is there any procedure to access the encrypted data partition and recover files stored in it, before wiping all?
Thank you.
Kind regards

you need to do a factory reset from the recovery menu.You will lose all your data but its the only way.

You should totally flash the 5.0.8 fw after flashing the offical pie OOS. It has been discussed in the official thread here at XDA.
Check this:
https://forum.xda-developers.com/showpost.php?p=79542744&postcount=517

Tagtag123 said:
You should totally flash the 5.0.8 fw after flashing the offical pie OOS. It has been discussed in the official thread here at XDA.
Check this:
https://forum.xda-developers.com/showpost.php?p=79542744&postcount=517
Click to expand...
Click to collapse
Thank you very much for the information!
This is what I did
1 Boot recovery and press cancel when it asks for password
2 Adb push needed files in /mnt
3 Flash the rom (OnePlus3TOxygen_9.0.2_28_OTA_082_all_1905110010_f09a2bfe8e361d.zip)
4 Flash the firmware package (oxygenos-9.0.2-bl-km-5.0.8-firmware-3T.zip)
5 Flash twrp 3.3.0-1 again in the recovery partition
6 Flash Magisk 19.2
7 Wipe cache / dalvik-art (with errors related to mount storage)
But I found the same error of the first post. Which is my mistake in the procedure?

Darksp1der said:
Thank you very much for the information!
This is what I did
1 Boot recovery and press cancel when it asks for password
2 Adb push needed files in /mnt
3 Flash the rom (OnePlus3TOxygen_9.0.2_28_OTA_082_all_1905110010_f09a2bfe8e361d.zip)
4 Flash the firmware package (oxygenos-9.0.2-bl-km-5.0.8-firmware-3T.zip)
5 Flash twrp 3.3.0-1 again in the recovery partition
6 Flash Magisk 19.2
7 Wipe cache / dalvik-art (with errors related to mount storage)
But I found the same error of the first post. Which is my mistake in the procedure?
Click to expand...
Click to collapse
You could have flashed the firmware first, ROM second, but I don't think it would have changed anything.
We used to have this problem with the closed beta and with the open betas as well.
Once you wipe your storage, flash Pie, boot it, it doesn't happen again. I've been to Nougat, then back to Pie, no issues.

i have issue with the OnePlus 3T

Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom

zunairkh said:
Hello.
I flash OnePlus 3T stock pie 9.0.3 to (ROM) aroma pie 9.0.4 with twrp (3.2.3.1)
My mobile got brick after then i use msmdownload tool from 1.11Gb mega.nz l then i got back my phone on Marshalls mallow but when i trying to upgrade to stock 9.0.3 pie with the twrp 3.2.3.1 successful flashed the rom and reboot to system but i can boot to system 3,4 hours still loading on red circle when stock first boot logo please help me what i do i need to upgrade stock 9.0.3 pie at least instead of custom rom now im using Miui 10 in OnePlus 3T so please guide me how i can back to upgraded os because i don't want to use custom rom
Click to expand...
Click to collapse
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...

Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
You should have said "use the latest", in this case 3.3.1-0 instead

Master_TC said:
At first use the latest TWRP 3.3.0.1
https://eu.dl.twrp.me/oneplus3/
Then try again...
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1

Immortalis said:
You should have said "use the latest", in this case 3.3.1-0 instead
Click to expand...
Click to collapse
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1

zunairkh said:
Can i use aroma 9.0.3 or OOS 9.0.3 with twrp3.3.0.1
Click to expand...
Click to collapse
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.

i failed
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system

Master_TC said:
Yes you can.
The latest version is 3.3.1.0. Sorry i have mistyped.
Click to expand...
Click to collapse
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system

zunairkh said:
i tried with letest twrp 3.3.1.0 recovery OOS.9.0.3 modem zip then i flash OOS9.0.3 FIRMWARE but still stuck on booting not enter in system
Click to expand...
Click to collapse
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.

Thanks sir i will try and inform you if it work i will be thanks ful

Master_TC said:
OK you want to use the original OxygenOS 9.0.4?
Then go this way (all your data will be lost!):
1. in TWRP (3.3.1.0) delete all partitions (Dalvik, Cache, System, Data,...)
2. reboot into TWRP
3. format Data in Wipe - Format Data - type YES
4. reboot into TWRP
5. connect your phone with your computer and install full OxygenOS 9.0.4 zip (download from OP page)
6. reboot into TWRP and install magisk, if you want to keep TWRP. Else reboot into system
First boot takes 5-10 Minutes.
Click to expand...
Click to collapse
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe

zunairkh said:
step 1 All partition include ( internal storage)?
Step 5 for transfer file oxygenos.zip? How to install though computer adb sideload or twrp flashing swipe
Click to expand...
Click to collapse
1. without internal storage (you can wipe it too, if you don't have any important data)
5. yes to transfer file or you use a sdcard. install OS in TWRP

I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks ? you solve my issue
If i want to imstall aroma rom so can i do same process
?

zunairkh said:
I wiped all thing
And wiped format data and instll oxygen os 9.0.4 with magisk
Thanks you solve my issue
If i want to imstall aroma rom so can i do same process
?
Click to expand...
Click to collapse
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!

Master_TC said:
Yes, so you can install all roms clean and without problems.
Don't forget to save your data!
Click to expand...
Click to collapse
Is there any method i can download miui cloud message,call history backup without install miui rom

Question Can't install custom roms after MIUI 12.5 china port (Redmi Note 10 pro India)

So I was using evolution x for a few days then I saw this MIUI 12.5 china from and tried to install it. I wiped Dalvik, cache and data then flashed the room. Unfortunately, I forgot to install magisk after that and just formatted data. I got stuck in a boot loop. Then I went back to recovery (orange fox) and it didn't recognize my internal storage (showing 0Mb). I tried installing another rom with OTG and I got this error "failed to mount system_root (no such file or directory)". System type was showing "f2fs" so I changed it to ext4. After that, I wiped everything(including internal storage) and installed the miui 12.5 china rom again then flashed magisk and formatted data. It booted and is working fine. But the problem is that recovery still doesn't recognize storage and I get the same mount errors when installing any other rom than miui. I also tried with twrp recovery but same result. So I'm basically stuck with miui and can't install anything else.

Flash stock miui using fastboot, reflash recovery and try again everything will be fine

chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fin
Click to expand...
Click to collapse
chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fine
Click to expand...
Click to collapse
Do I flash with mi flash or adb?

chazy chaz said:
Flash stock miui using fastboot, reflash recovery and try again everything will be fine
Click to expand...
Click to collapse
I'm getting this error when installing stock rom with mi flash "error:Not catch checkpoint (\$fastboot -s . * lock),flash is not done"

adnansamihr said:
I'm getting this error when installing stock rom with mi flash "error:Not catch checkpoint (\$fastboot -s . * lock),flash is not done"
Click to expand...
Click to collapse
if you have rmn 10 pro you have wrong rom i see the foto RKFINXM but for rmn10 pro is RKFMIXM FOR EU ONLY.

stauros2653 said:
if you have rmn 10 pro you have wrong rom i see the foto RKFINXM but for rmn10 pro is RKFMIXM FOR EU ONLY.
Click to expand...
Click to collapse
Can you link the right rom plz

adnansamihr said:
Do I flash with mi flash or adb?
Click to expand...
Click to collapse
download the full fastboot zip (4gb compressed, 8gb uncompressed), it comes with everything you need

I
adnansamihr said:
So I was using evolution x for a few days then I saw this MIUI 12.5 china from and tried to install it. I wiped Dalvik, cache and data then flashed the room. Unfortunately, I forgot to install magisk after that and just formatted data. I got stuck in a boot loop. Then I went back to recovery (orange fox) and it didn't recognize my internal storage (showing 0Mb). I tried installing another rom with OTG and I got this error "failed to mount system_root (no such file or directory)". System type was showing "f2fs" so I changed it to ext4. After that, I wiped everything(including internal storage) and installed the miui 12.5 china rom again then flashed magisk and formatted data. It booted and is working fine. But the problem is that recovery still doesn't recognize storage and I get the same mount errors when installing any other rom than miui. I also tried with twrp recovery but same result. So I'm basically stuck with miui and can't install anything else.
Click to expand...
Click to collapse
M haveing the same issue can't port or flash the arrow rom after update. Twrp can't clean flash ?? Any help

Hello...i m using note 10 pro max India...i m facing lots of issues...i can't flash any rom with twrp...its shows zip file corrupt in every rom..i flashed fastboot rom with mi flash tool...but no sound coming from the phone...any now when i go to twrp to flash other roms same issue...zip file corrupt.please help me