earlier today i've replaced my screen, it was all and well, until a white stripe suddenly popped up, it's a strong white vertical stripe, i can't attach a photo because i'm a new member...
anyone has any idea how can i get rid of it?
First you must determine whether it is a hardware or software issue. Does the white line persist even while booting your device? Try entering the bootloader and see if it's visible. If yes, then it is most likely a hardware issue, in which case, you will need to get the screen replaced again.
JarJarWinks said:
First you must determine whether it is a hardware or software issue. Does the white line persist even while booting your device? Try entering the bootloader and see if it's visible. If yes, then it is most likely a hardware issue, in which case, you will need to get the screen replaced again.
Click to expand...
Click to collapse
see now, it is probably hardware issue because i've checked with the bootloader and the line is still visible, but do you have any idea what could've caused this in the first place? because i've replaced the screen, used the phone for a couple of hours, and bam, out of nowhere, white stripe.
meowmanbar2 said:
see now, it is probably hardware issue because i've checked with the bootloader and the line is still visible, but do you have any idea what could've caused this in the first place? because i've replaced the screen, used the phone for a couple of hours, and bam, out of nowhere, white stripe.
Click to expand...
Click to collapse
I'm afraid not. You'll probably need to get it checked by a professional.
meowmanbar2 said:
see now, it is probably hardware issue because i've checked with the bootloader and the line is still visible, but do you have any idea what could've caused this in the first place? because i've replaced the screen, used the phone for a couple of hours, and bam, out of nowhere, white stripe.
Click to expand...
Click to collapse
Maybe the screen is defunct, sounds like a serious case of light bleed at the edge of the screen. Either way, you'll probably gonna need to get the screen replaced again.
100% sure there were no tiny parts of old glass left underneath the new assembly? Doesnt take much to break the new screen.
Related
I just bought my tilt from at&t about 2-3 weeks ago, and now I believe the screen is broken. The weird thing is its not cracked, it was sitting on my bed and i recieved a text and I picked it up and the screen was out. I didn't drop it or hit it with anything, now the screen is completely white, with what looks like ink in the lower right corner and thats why im assuming its the screen. So the question is, is it soley the screen or could my rom, duttys latest hybrid version, have messed with anything? And I'm not sure how that would affect anything anyway. I just don't see why it would go out all the sudden and nothing have happened to it. Im under the assumption now that it is the screen, but was wanting to if it was a hardware problem. I've searched some threads and I havn't found one where there wasn't a crack in the screen.
absintheminded said:
I just bought my tilt from at&t about 2-3 weeks ago, and now I believe the screen is broken. The weird thing is its not cracked, it was sitting on my bed and i recieved a text and I picked it up and the screen was out. I didn't drop it or hit it with anything, now the screen is completely white, with what looks like ink in the lower right corner and thats why im assuming its the screen. So the question is, is it soley the screen or could my rom, duttys latest hybrid version, have messed with anything? And I'm not sure how that would affect anything anyway. I just don't see why it would go out all the sudden and nothing have happened to it. Im under the assumption now that it is the screen, but was wanting to if it was a hardware problem. I've searched some threads and I havn't found one where there wasn't a crack in the screen.
Click to expand...
Click to collapse
It's definitely the screen, the 'ink' color is the liquid crystal layer that's ruptured..
Hello, I've had my diamond about a week, looked after it, no physical damage to it as far as i noticed...
but just been browsing and notice a small line about 1cm long across the screen only visible on light background, rainbow coloured. would this be a scratch underneath the screen? i dont feel any roughness on the outer screen. how would this happen, any solutions? cheers.
jmh7 said:
Hello, I've had my diamond about a week, looked after it, no physical damage to it as far as i noticed...
but just been browsing and notice a small line about 1cm long across the screen only visible on light background, rainbow coloured. would this be a scratch underneath the screen? i dont feel any roughness on the outer screen. how would this happen, any solutions? cheers.
Click to expand...
Click to collapse
Same here...
Thats a fault with the screen, I work for a big TV company and that is the most common fault we see in our service centre! is it a green line? if so then its probably some dust on an internal connector, According to our engineers its easy to fix but invoves taking the whole screen off!
(this is how it works with TV's im pretty sure its the same with a phone screen!)
That's funny, I recently noticed the exact same kind of scratch on mine.
I can only tell with a white background though...
That happened to me aswell. Just do a soft reset, it worked for me .
ma3a20 said:
That happened to me aswell. Just do a soft reset, it worked for me .
Click to expand...
Click to collapse
We're not talking about the same thing here.
In my case, it's clearly a scratch considering I can see it with the device turned OFF under the right lighting conditions (and at a certain angle).
I can't tell if it's the screen protection or the actual screen that's damaged though and I don't really care to try to find out
Hello people,
I rarely see a burnt in (like old crt screens) image on the bottom of the screen.
For example when I change the volume, the softkey labels of the today screen are still visible, along with a white line. Most times it is normal so I don't worry very much but I'm wondering if someone else has the same issue.
I've tried many versions of hardspl (because they seem to be connected with some screen issues) but the problem still exists.
Hi i have the exact same issue, i put a post up a month ago not had any response on it. I have a MDA compact IV, not updated any ROM or HARDSPL yet. I was tempted to update to see if the problem could be rectified.
Have you update to a cooked rom? I might send mine back to have it fixed if its a screen issue.
Mine only holds the "burnt in image" along the right of the screen from top right corner to bottom right corner around 3cm in.
Also i have noticed the "Burnt in image" seems to get stronger when the device heats up. If i use GPS or 3G, this seems to affect the screen.
My background is black which makes it really noticable, i think if i stick with the orginal t-mobile white background it's probably not that noticable.
mmm
Perhaps the units you bought where like demo units. Those units that are displayed all day long turned for people to look at them. I have read in another forum that perhaps that distortion is caused by extreme temperatures, cold or heat.
well i'm still trying to figure out what is causing it, as I notice it only once in maybe a week. Maybe temperature is the most probable cause. For me I notice the defect only in gray background (e.g. when changing volume or launching opera).
My unit was from the first batch from expansys (origin htc asia)
It's possible your handsets have screens which are somehow susceptible to heat damage from inside the phone. This would be no fault of your own, but a manufacturing defect.
I'd suggest returning the phone to the retailer, HTC or the operator depending on your situation.
However, if you're using the phone in extreme conditions, ie low temperatures, you may very well find the LCD slow to refresh or have some level of image retention.
Let us know the outcome
i also have a ripple effect when pressing, but its more apparent with black. its also a first gen model, so i think ima make a phone call to htc. maybe a can get a new device.
for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!
tnyynt said:
for the burn in, try this:
1. Go to power settings, deselect automatic backlight management.
2. Pull up backlight level to maximum.
3. Reselect automatic.
You should be ok!
If not, faulty device!
Click to expand...
Click to collapse
Ok I will try this although I can't see how the backlight can affect the screen. In order to repair it with warranty I would have to send it to expansys uk (because it is not a European device) and I bet it would take long
Have you tried removing the battery for a while - some lcd screens can get the memory effect, and cutting power for long enough normally cures it.
My phone actually holds the previous menu under the current menu.
Example i'm on the home screen, goto messages and send a text using the qwerty keyboard. Back to the home screen, i can see a very faint image of the qwerty keyboard under the Programs hotkey.
When the PIN lock comes on the bottom right is "MENU", i can see a faint "programs" letters icon underneath it.
I will try and leave the battery out for a few hours, if not a call to t-mobile!
ok, i have the same "problem". even after a soft-reset the words CommManager
and Programs are still slightly visible in the boot screen.
but: as mentioned above, turning the device off for a couple of minutes cures
this, and the screen is dark as hell again!
really seems to be some kind of memory effect!
regards,
markus
Left the battery out for a few hours, made no difference. I guess is not a software problem.
will be giving t-mobile a call tomorrow!
:-(
I guess every htc device must have a flaw...
when it does it again I will try to take a photo of it and post it here
Hi same problem here.... See my post below..
http://forum.xda-developers.com/showthread.php?t=417629
I thought it was due to Spb Shell but no, now i'm happy i'm not alone..
But what solution for this??
I'm not worried about the burn in looks.. My worry is whether this behavior of the screen will progressively damge the screen???
I have been using the Diamond at full backlight.. Last few days i've put it down to minimum, but the problem persists!!!
ok, I think it happens when it overheats.
So that is why it is caused when charging.
wtf?
No its not due to overheating, coz LCD screen are supposed to tolerate temperatures upto 80degree C... Dont know if its related to electro magnetic radiation, may be looks like it's more after i use the network...
Hi another mate has this problem Andrew...
http://forum.xda-developers.com/showthread.php?p=2684406&posted=1#post2684406
Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?
the problem appears more often now on my device....
It does not have to do with heat afterall.
Why would the image "stick" when the phone is off? I mean that many times I see the symptoms right after I switch the phone on.
Do we have any screen experts in the forum?
viperone88 said:
Hi,
i sent my phone back to T-Mobile hoping they will fix this issue with the screen. Just received the phone and it looks like they have done nothing On the job sheet all it says is "Software updated"? The problem is still there!
I dont think there is a fix as such, it looks like this is the cause
http://www.practical-home-theater-guide.com/image-sticking.html
I'll try if i can get a completely white background and leave the screen on for a while at the brighest setting, if this will erase the screen issue?
Click to expand...
Click to collapse
After calling up T-Mobile and made a complaint saying nothing had been done by the repair centre, they gave up and agreed to give me a handset replacement. Received the handset today, looks like a refurbed one? Anyway my problem is now fixed. Left the phone on a while and it got pretty hot, no ghosting on the screen
The restore was a pain, Wifi didn;t work, the HSDPA didn;t work. But after a few hours messing around it's all up and running so far.
About a month ago I got my Kaiser screen replaced as it was broken, now all of a sudden the screen is all whitish and I can hardly ready whats on it!
Is the screen broken again??
I'm fixing to replace the screen in a Kaiser i bought used with a broken screen. From the reading i've done, it sounds like one of the cables to the screen is loose. Trying pressing on the middle of your keyboard and see if anything happens. The big ribbon cable has a connector there.
hmmmm coming to think of it when I pressed the middle of the screen it used to do some funny effect (like when you press your TFT monitor) but now nothing happens!
Is your screen something like this?
jrask said:
Is your screen something like this?
Click to expand...
Click to collapse
last night i was woken up by a text, i looked at my phone and all of a sudden the screen went crazy. Started scrolling up and down (like a bad signal/wrong format ntsc/pal on a tv). Everything got all messed up and lines and dashes all over, kinda like your screen, it started acting wierder when i began applying pressure on the top of the device by the earpiece and d-pad. So i soft-reset the device and it was still doing it while boot up, leading me to believe it wasn't a software issue.
So in my half awake state i just left it on my nightstand. I woke up and its perfectly fine now, even when i press all around the screen.. wierd huh?
I didn't notice anything like you descriped, touch screen and everything else worked like before. Only the colors were like on the picture. Tried hard reseting but didn't help. Phone is still under warranty so sent it to be repaired, i can post what they did when i get it back.
Thanks jrask. Thats exactly how it looks.
I think i have some bad news for you, the screen was damaged and needed to be replaced. I think it was cracked under the frame.
Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Since you change your LCD....it might be a different panel from your original. Check your kernel or flash the kernel again.
Sent from My LG G2 LS-980 or LG G Pad 7.0 V400
Same thing happen to me about a month ago during my G2 screen repair. I bought mine on ebay from a seller that had sold hundreds of them, figured I couldn't go wrong. Unfortunatly I never figuered out why it was failing and just ended up returning it for a refund. The second screen I bought was from etradesupply and it worked perfectly. Hopefully someone has a fix for this weird issue.
I had that exct thing happen to me, well rainbow colored lines. I shattered the screen on a corner drop. I took it to Gopher Mods, they replaced the screen and within a few minutes it happened. They replaced it 2 more times and eventually the last time the screen popped out a little bit since they did not add enough glue/sticky tape inside and the lines dissapeared. They also gave me a full refund, with which I got another G2. So two working phones now lol.
Basically the screen might be pressed in too tightly causing the cable inside to be kinked too much. Its very easy to damage the video cable in this phone mind you.
Bmatthews11 said:
Hello,
I know a lot of us are having problems with displays and digitizers and im wondering if anyone else has this problem. Yesterday i replced my screen because it had a dead zone. I booted up the phone and everything worked great until i locked the screen. When i pressed the power button to unlock it there was just a black screen with lots of white lines forming. Without fail the phone will do this. I restart and its fine but when i lock it, it gets screwy. I really need to get this working since i dont even have a backup phone right now. By the way the display is not oem its a knockoff.
Click to expand...
Click to collapse
Try installi mg dorimanx's kernel which detects your panel type of search the thread for a kernel swap flashable. Your new panel may be of a different type causing the white lines.