I have upgraded from KitKat to Android7 (Nougat).
The Nook does not recognise the external micro sd card.
Also, when I connect to a PC in windows explorer the Nook is recognised but I cannot see any files in the internal memory and the external card is also not showing.
Any ideas please.
The SD card is now appearing as an external card in the Nook. It was not formatted.
It still does not appear on the PC
Problem solved.
Apparently due to Nook to PC being in charging mode and not transfer mode.
Related
Hello,
I can not see the external sd card on my windows PC.
I can see the internal sd card as a drive and i have read write access on my win PC (XP/ prof and win7 prof)
I can see the external sd card as a drive but cannot see any files or folders.
connected USB cabel
select mass storage device
not possible to connect USB to PC via dialog (no notification is vissible in notification bar)
reconnect usb cable
Now it is possibel to connect USB to PC via upcoming dialog on phoneselect mass storage device Message box comes up telling that some apps may not work because they have access to sd card
After disconnecting the phone from PC I cannot access the external SD card on my phone until reboot of phone.
I can access the the external sd card using a card reader on my PC.
I think I got these problems since flashing Voodoo-stable-5.1-Froyo-2.2.1-GT-I9000
Firmware Version 2.2
Baseband I9000XXJPP
Kernel 2.6.32.9
I tried to format the sd card with the phone - no changes.
Best regards and thanks in advance O
I have the exact same problem, when I connect with usb cable to my win 7 x64 system using the mass storage option, at first I do not connect at all, then I have to remove the usb cable once, after that I can connect but only see the sd card on the phone itself, the external sd card is invisible.
When I remove the usb cable I am also unable to see the external sd card on the phone itself and I have to restart my phone in order to see it again.
My proplem is solved. By error I installed the voodoo 5.1. on Froyo 2.2 . But it should have been installed on Froyo 2.2.1 as mentioned in the filename of the zip file. I thought froyo 2.2.1 is included in the voodoo update.
Gesendet mit Tapatalk
Answer SD card not visable.
Set the USB to choose on connect and the select through the prompts and it works for me.
5.0.2 kernel are for 2.2
from 5.0.3 its all for 2.2.1 i also have same problem if i flash new kernel on 2.2 rom
Okay, not technically a Nook question. But in order to use the extras gigs of space on my sd card while using nookie froyo for sd I need to repartition the sd card. The problem is that Easeus isn't seeing the card. It's there under disk management, explorer, just not Easeus.
Anyone else encounter this problem?
Yep, had same issue. For some reason, when I took out the microsd card and plugged into my laptop via the card adaptor, I had same issue.
Was only able to get Easeus to recognize the card when inside the nook and plugged in via usb. I then partitioned normally. Also check debugging is off (i think off). This is how I got to finally work for me.
Maybe a stupid question but did you launch easeus with the card in or insert the card with easeus already up? Think it has to be in the slot before you load easeus.
I already had the card in the computer. Checked to make sure that I could see it as a drive with all the partitions first. Then fired up Easeus. only shows my C: drive...
Sent from my Samsuck Vibrant
Sometimes your card reader can cause problem. Try a different micro sd adapter or usb reader
Sent from my PC36100 using XDA App
Had the same
Hi I also has same problem was using server edition uninstalled and installed free version can now see sd card ???
Philyk
I have the same problem. Windows management sees 4 partitions on the card. 1 of them is not formatted.
Explorer only sees files on the root.
This is after I installed CM7. So what partitions can we use for storage?
Are you running the most recent version of Easeus (8.0.1)? I had a problem with a nook SD card that updating solved.
You haven't said If it's in a laptop card dreaded yet. Easus only recognizes USB drives and internal drives. Google Mini tool partition wizard. That one will work for it (assuming you have the laptop card reader). You should be able to expand to empty space on fat32 Partitions in disk manager on windows though, but the mini tool partition wizard is much better than easeus
hi everyone! I'm currently running cm7 on sd card, but my problem is, my sd card isn't recognized by my pc. when i plug the cable in, the pc (windows 7 os) only recognizes the internal memory. Do you have any idea why it does this? Does it have anything to do with my brother doing the cm7 install in a mac?
Another thing, can we update the version of cm7 even if it's on the sd card? if so, how?
thanks!
Windows doesn't see your microsd card because it can not recognize the file system.
Even Paragon Partition Manager and Easeus Partition Manager don't recognize the file system. However if you have Linux installed (ubuntu, Mandrova) you should be able to see whats on the card. And you should be able to resize partitions using Gparted.
I've recently run into a problem where I can view the contents of my external SD when my Amazon Fire is connected to my PC via USB. This hadn't been a problem until a few days ago. Now, when I connect my tablet to my PC, it only shows me the internal storage. I recently updated SuperSU, and I think that's when the problem began. However, I'm not sure how it's related. Can anyone help me out?
FYI, my tablet still recognizes the SD card. I can still manage the contents of the SD card on my tablet using X-plore, so there's nothing wrong with the SD card itself. I can still download files onto the card and move files around. The only issue is that I can't access the card from my PC via USB, which is kind of a hassle.
I've uninstalled and re-installed the driver, but this hasn't helped. I'd appreciate any advice. Thanks.
Nevermind. I managed to get it working again. I rebooted my tablet, and it did some sort of update. Now the SD card is showing up when I'm connected to my PC via USB.
When I connect my 4s (EU) to my PC, it detects the SD card (128GB Kingston or 64GB, both tried exFat and FAT32 formatted), but when opening the contents, it says there's nothing on it, while it has over 40 gb of data on it...!
What's going on? The card is up to spec!?!
The phone's own memory is shown correctly and I can access all maps. The SD card however is detected, but not accessible.
The only files I can see are the ones I copy from PC to phone's sd card over USB connection. But I want to copy photos and videos from phone to PC.....
I already tried uninstalling the Alcatel Idol 4s driver, and reconnected to get this phone mounted again, and the result is the same.
Anyone have this too? Fix?
PS: I've tried FAT32 formatting as well as ExFAT, both cases the PC detects the card, even tells me how much space is available, but shows NO contents and tells me the map is EMPTY!?!?!
Do you try usb debugging? Is ur phone locked when you connect it to pc?