Problema a flashear Supersu con TWRP - SuperSU

Hola, tengo un Samsung Galaxy J1 Mini Prime con android 6.0.1
Antes lo tenía rooteado, lo rootee mediante en TWRP y flashee el zip de Supersu, resetee mi teléfono a fábrica, volví a instalar el TWRP con Odin, ahora que voy a flashear el Supersu no se puede, sale FAIL, no se que hacer
Auto Translation :-
Hello, I have a Samsung Galaxy J1 Mini Prime with android 6.0.1
Before I had it rooted, I rooted it in TWRP and flashed the Supersu zip, reset my phone to the factory, I reinstalled the TWRP with Odin, now that I'm going to flash the Supersu you can not, it's FAIL, I do not know what to do

Damianwdff said:
Hello, I have a Samsung Galaxy J1 Mini Prime with android 6.0.1. Before I had it rooted, I rooted it in TWRP and flashed the Supersu zip, reset my phone to the factory, I reinstalled the TWRP with Odin, now that I'm going to flash the Supersu you can not, it's FAIL, I do not know what to do
Click to expand...
Click to collapse
I don't have this device but, the following thread may be helpful or, if you need to, post a question there for member assistance.
https://forum.xda-developers.com/showthread.php?t=3608991
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE

Related

[Q] Some question to Criskelo ROM V75

Hello,
I am new here and because this is not allowed to post my questions directly in the thread of the customer rom. I installed Criskelo ROM V75 on my Galaxy S I9000 and after some problems, now it’s work very well. Thank you for this great rom. After this I flash the theme Erebos, and I liked it very much, all works well.
Criskelo ROM V75
Erebos (1.4)
My questions are:
Can I already use the rom updater or the new theme Erebos will make problems?
Before I flash the customer rom I had recovery 2e (flashed with Odin) and now is 3e again…but I want make a backup and need recovery 2e again. Which Kernel I can use? Is possible to give me a direct link? I already read that I need a SeepMod…but which? How I flash I know, I only need know which
And sorry for my English I am a German ^^
See you xporter
Can nobody help me???
Can nobody help me???
In some days I will have 10 posts to write directly in the thread
Come on ... I had 9
Hello again
About my second question I found a solution alone. Is a little bit strange and I don´t understand really why it works, but ok it works. If I start the recovery mod over the 3 keys, I have recovery e3 and the same happens if I start a backup directly over ClockworkMod. A Backup is not possible, ever chancel with a error. But if I start the recovery mod over the Rom (push Power key and choose Recovery) the mobile phone start with the ClockworkMod Recovery Mod and I can make the backup and all the other things.
Maybe somebody can answer my first question.
No puedo descargar!!!
Buenas noches desde España, Criskelo:
Te comento. Soy nuevo en el mundo de android y aunque tengo un viejo Galaxy S i9000 que me han regalado, me ha entusiasmado la idea de mejorar la rom que tienes. Un conocido que tengo me ha hablado de tu trabajo y me parece genial, y eso que todavia no entiendo mucho de esto.
El tema es que intento descargar desde este link y no me deja desde España ¿Me puedes aportar alguna solución?
Muchas gracias. Te pongo aquí el link.
http://forum.xda-developers.com/showthread.php?t=914859
huhuhu,n now i ll go buy some dictionary...
Sent from my GT-I9000 using xda premium

[Q] [HELP] SuperHardBrick

Hi, I have a GT-I8190 and from one day to another not grab wifi. I tried to update and upgrade KIES was performed but stick with boot loop. I have flashed several images of the box but still even with the same problem. I can enter Download mode but not recovery or stock or CWM or TWRP.
HELP!
Sorry for my bad English
-------------------------------------------------------------------------------------------------------
Hola, tengo un GT-I8190 y de un dia para otro no agarro wifi. Lo intente actualizar por KIES y se realizo la actualizacion pero quedo con boot loop. He flashed varias imagenes de fabrica pero sigue aun con el mismo problema. Puedo entrar a Download mode pero no a recovery ni stock ni TWRP o CWM.
AYUDA!
Perdon por mi mal ingles
AlbertoJOG said:
Hi, I have a GT-I8190 and from one day to another not grab wifi. I tried to update and upgrade KIES was performed but stick with boot loop. I have flashed several images of the box but still even with the same problem. I can enter Download mode but not recovery or stock or CWM or TWRP.
HELP!
Sorry for my bad English
-------------------------------------------------------------------------------------------------------
Hola, tengo un GT-I8190 y de un dia para otro no agarro wifi. Lo intente actualizar por KIES y se realizo la actualizacion pero quedo con boot loop. He flashed varias imagenes de fabrica pero sigue aun con el mismo problema. Puedo entrar a Download mode pero no a recovery ni stock ni TWRP o CWM.
AYUDA!
Perdon por mi mal ingles
Click to expand...
Click to collapse
flash a completely stock firmware via odin
Ahmed.ragab said:
flash a completely stock firmware via odin
Click to expand...
Click to collapse
I've done more than 10 times
AlbertoJOG said:
I've done more than 10 times
Click to expand...
Click to collapse
flash the oldest you can get for your country then
search www.sammobile.com or here http://www.tsar3000.com/Joomla/inde...iii-mini-firmwares&catid=55:samsung&Itemid=82
AlbertoJOG said:
I've done more than 10 times
Click to expand...
Click to collapse
Screw that, just return it to your seller. The contract of sales lies with the seller, not for you to send it to the manufacturer. I fully drained the battery of my bricked S3 mini before sending it back to Amazon (my seller) and they never found out it was rooted! This is when the download mode of a bricked S3 mini comes to use

ASUS ZenFone Go ZB500KL ASUS_X00AD

Hi everyone,
I everyone, i may be too late to ask this question but i've checked all previous threads about rooting ASUS ZB500KL and tried lots of given tutorials but still the root process is unsuccesful.
From the begining i couldn't install TWRP even using ADB commands it keeps saying "Failed". i'm desprete to root my phone cause i work on mobile developpement and i really need to root it.
Can anyone help me with a succesful tutorial and needed files : - TWRP for Asus ZB500Kl "ASUS_X00AD"
- I already downloaded the latest version of SuperSu and a detailed walkthrought.
I'll be very grateful and hope to get answers from you guys.
With my sincere and respectful greeting.
:crying::crying::crying::crying:
Can anybody reply to my post please? I'm really desperate thank you all for helping.
Asus_X00AD I'D ALSO LIKE TO... [TAMBIÉN ME GUSTARIA ...]
Mod edit - translated by https://www.deepl.com/translator:
It's the phone I bought 4 years ago for my daughter and she can't install the poor thing anymore, I can't find in xDa any alternative to be able to twrp or surround, flash etc.
I would be grateful for your help. I can't find anything in the forum about this model, would there be something generic to be able to mess it up?
************************
Es el teléfono que le compré hace 4 años a mi hija y ya no puede instalar la pobre ni un juego, no encuentro en xDa ninguna alternativa para poder twrp o rodear, flashear etc.
a los foreros os agradecería ayuda no encuentro nada por el foro referido a este modelo, habría algo genérico para poder trastearle?

Stock Nougat 7.0 Downgrade for Binary 3

YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
Attention
The rom and the bootloader provided in this topic and to be used in a device where the Bootloader Binary has been changed to 3, devices where the binary has not been altered that is in Binary 1 or 2, it is not necessary to use these files to Downgrade. If you use and come, there is an error such as: Loss of IMEI, Battery Bug, Super Heating, Boot Random. I am not responsible for any errors caused by user error or misuse.
Instruction:
1º Download the most recent version of Odin or it can be the version also v3.10.
2nd Download the files needed to downgrade.
3º Open Odin, and in the AP put the file with the name (bootloaderDowngrade.tar) of the start to start the procedure. The unit will restart by itself. Go back in download mode again and in AP put the file (Downgrade Nougat 7.0.0 Binary 3.tar) of the start again leaves until the device restarts normally.
Note: The first start of it may take 5 to 10 minutes.
4º After the procedure is finished, the phone will restart with ROM STOCK Nougat 7.0, NO ROOT and NO MODIFICATION (ROM IS FACTORY). However this procedure did not allow updating by OTA, because in this procedure the Binary will still continue with B3 and file is with binary combination. But when installing any other ROM STOCK when passing them on ODIN, just do not put the Bootloader of 6.0 or 8.1.0 in the BL option. Only use the stock files as standard AP, CP and CSC.
Download:
bootloaderdowngrade
Downgrade Nougat 7.0.0 Binary 3
Donation:
Click Here
XDA:DevDB Information
Nougat 7.0 Downgrade By Pass Binary 3, ROM for the Samsung Galaxy J7
Contributors
darkfalling
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2018-11-07
Created 2018-11-07
Last Updated 2018-11-07
reserved
Reserved
Hi there!
There is a way to get root?
Thanks for your job.
¡Hola!
Espero obtener el link por favor ya que actualize y quisiera bajar, muy buen aporte.
darkfalling said:
YOU ARE NOT ALLOWED TO USE ANY PART OF THIS ROM WITHOUT MY PERMISSION
Attention
The rom and the bootloader provided in this topic and to be used in a device where the Bootloader Binary has been changed to 3, devices where the binary has not been altered that is in Binary 1 or 2, it is not necessary to use these files to Downgrade. If you use and come, there is an error such as: Loss of IMEI, Battery Bug, Super Heating, Boot Random. I am not responsible for any errors caused by user error or misuse.
Instruction:
1º Download the most recent version of Odin or it can be the version also v3.10.
2nd Download the files needed to downgrade.
3º Open Odin, and in the AP put the file with the name (bootloaderDowngrade.tar) of the start to start the procedure. The unit will restart by itself. Go back in download mode again and in AP put the file (Downgrade Nougat 7.0.0 Binary 3.tar) of the start again leaves until the device restarts normally.
Note: The first start of it may take 5 to 10 minutes.
4º After the procedure is finished, the phone will restart with ROM STOCK Nougat 7.0, NO ROOT and NO MODIFICATION (ROM IS FACTORY). However this procedure did not allow updating by OTA, because in this procedure the Binary will still continue with B3 and file is with binary combination. But when installing any other ROM STOCK when passing them on ODIN, just do not put the Bootloader of 6.0 or 8.1.0 in the BL option. Only use the stock files as standard AP, CP and CSC.
Download:
bootloaderdowngrade
Downgrade Nougat 7.0.0 Binary 3
Donation:
Click Here
XDA:DevDB Information
Nougat 7.0 Downgrade By Pass Binary 3, ROM for the Samsung Galaxy J7
Contributors
darkfalling
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2018-11-07
Created 2018-11-07
Last Updated 2018-11-07
Click to expand...
Click to collapse
Muchas Gracias! funciono perfecto. hay alguna manera de obtener root?? no acepta el recovery de twrp
Great!
Why did not you use a more current version of the nougat system?
jbryanr022 said:
Muchas Gracias! funciono perfecto. hay alguna manera de obtener root?? no acepta el recovery de twrp
Click to expand...
Click to collapse
Without TWRP and ROOT forecast, I'm working to resolve this. I get for ROOT and TWRP but because of the Binario continue in 3, TWRP gets the Bug that can not access internal space and even with this bug. But you can turn it on but it stays on a black screen saying it's a problem.
Rod_1980 said:
Great!
Why did not you use a more current version of the nougat system?
Click to expand...
Click to collapse
Even putting a current version of Android would not change at all. I am using my J7 G610M to do this procedure and the other recent firmware the Binary of it are all of end 1 ... and change 6 by half dozen.
Ops, I commented on the wrong post. Sorry
Como vuelvo a instalar una version 8.1 oficial en mi telefono , ya que no me deja
Cyanogem said:
Como vuelvo a instalar una version 8.1 oficial en mi telefono , ya que no me deja
Click to expand...
Click to collapse
Puede instalar el 8.1.0 en su teléfono por el odin sin ningún problema, vea si esta usando la ROM correcta pues no hay nada que te impida instalar el OREO, el único error es del downgrade a 6.0.1 y 7.0 binario 3 no se permite.
amigo, esto puede servir para un s7 que esta en binario 3? gracias
draconash said:
amigo, esto puede servir para un s7 que esta en binario 3? gracias
Click to expand...
Click to collapse
No puede, en el sitio de Sammobile tiene el firmware con revisión para Binario 3
Hola amigo si Sabes Montar eso de roms Y Modificarlas, Tengo una gran idea Para este mismo Cell. Como pude encontrar el J7-j700t Cuenta con Nougat 7.1.1 en Bootloader 3. Los dispositivos Tiene Casi todas Las mismas funciones. Creo que Serviría Mucho si Lograses Adaptar esa Rom Para este dispositivo, Que Opinas? La rom esta en Sammobile/firmwares/galaxy-j7/SM-J700T/TMB/download/J700TUVU3BQK3/196920/
can i use this firmware to g610y model? hoping that it could fix unknown baseband issue.already tried latest binary 2 firmware but still unknown baseband
can i install it and flash supersu by otg without issues? Thanks!
another thing... there is a rom for j7 j700t wich is in binary 3 with nougat 7.1.1. you can convert it for j7 prime. the both ones have the same characteristics!
Downgrading I remove the LTE option in the second line of mobile only worked in E... Line 1 was left in H and H+, disabling one of the lines could only access LTE :laugh:
No me deja insalar Downgrade Nougat 7.0.0 Binary 3.tar Se queda en setupconecction, ayuda pls (((!!
I can not install Oreo 8.0 firmware
Cyanogem said:
Como vuelvo a instalar una version 8.1 oficial en mi telefono , ya que no me deja
Click to expand...
Click to collapse
the same happens to me
After doing this, can I install an android 8.0 firmware? Because when I start Odin, it does not let me install what can I do to install the bt and its most current firmware?

Problem with TWRP after install ROM

Hello for everyone.
Sorry for my english, i'm from Argentina, i don't Talk english.
The problem I have is that when I want to install a ROM, after sliding the install button, the TWRP tells me that there was a problem.
The error code is 07.
I know it is a simple error to solve, but could someone please tell me how to do it?
The specific model of my Samsung is the G800M and I have the latest version of TWRP installed.
Thank you.
ayrsigure said:
Hello for everyone.
Sorry for my english, i'm from Argentina, i don't Talk english.
The problem I have is that when I want to install a ROM, after sliding the install button, the TWRP tells me that there was a problem.
The error code is 07.
I know it is a simple error to solve, but could someone please tell me how to do it?
The specific model of my Samsung is the G800M and I have the latest version of TWRP installed.
Thank you.
Click to expand...
Click to collapse
Try an older TWRP version like 3.2.8 or 3.3.0.
Which ROM are you trying to flash?
With 3.3.0 I've flashed crDroid 5.12= Pie on mine.
bmwdroid said:
Pruebe una versión anterior de TWRP como 3.2.8 o 3.3.0.
¿Qué ROM estás intentando flashear?
Con 3.3.0 he flasheado crDroid 5.12 = Pie en el mío.
Click to expand...
Click to collapse
Hice la recuperación en mi mini s5 g800h y ahora no pasa la descarga que sugieres?
ayuda nortecesito
lacrostyc25 said:
Hice la recuperación en mi mini s5 g800h y ahora no pasa la descarga que sugieres?
Click to expand...
Click to collapse
Translation: I did the recovery on my mini s5 g800h and now the download you suggest does not pass?
Please translate next time yourself first and check translation if it's correct.
Reply: I didn't suggest any download.
What do you mean?

Categories

Resources