Does anybody know how to remove this 'x' from signal bar it wasn't there on MM but after updating it appeared
I dont use data packs so please help me:crying:
not possible without custom rom
Related
Well i found a fix for our problems with network icons! Hope Everyone enjoys it!.
Code:
Taskbar icons for our phones can have interesting effects. A few work, but most ether 1/2 work or fail miserably.
Currently i have only found 1 set of icons that work 100%
[url=http://forum.xda-developers.com/showthread.php?t=624874] Dusk Taskbar [/url].
Currently i am using this taskbar
[url=http://forum.xda-developers.com/showthread.php?t=626188] Dark Ninja's Android Taskbar[/url]
This one is working like 3/4% with only the only the signal bars not working(tho it doesn't look bad)
Has anyone determined why some work and others dont? I have very little experience with taskbar icons tho i plan to jump in soon...
Another taskbar now works 100% (minus bluetooth)
8/3/10 [Released] HTC Hero/Desire/Legend Taskbar For WM6.5/WM6.5.X W|VGA
idk how/why it works but i plan to find out .
Good job, it looks very clean. The only issue is that my BattClock doesnt match the multi-shade toolbar anymore
Change your theme then change it again and it will change the taskbar color.
I finally found a fix for our taskbar issues, cab in first post.
Sweet!
Great Job Jug6ernaut,
Mind if I add this one to Expo/IQ Tweaker?
fix for icons
finally a fix for the signal bars that would not change from stock white, one thing though, the signal strength will never show more than two bars, yet can open up the manager where you can turn bt, wifi etc on or off, and the signal strength is stronger than what the taskbar icon shows. example icon shows 1 or 2 bars where it should be showing 4 or 5 bars. do i need to change a registry value or what? any help much appreciated. thanks a lot.
3g sig
actually its just when the phone is showing 3g that the signal bars act wierd. it will show 2 bars when the signal should be 4 bars. when the strength actually is 5 bars it will show 4bars, never just 3bars. during a call the signal strength showing will be correct. any help?
Strange, mine seems about the same as the LG bars (IQ) but I’m almost always showing as being on “H” (HSPA+) and not “3G” (HSPA) so I’m not sure. With the taskbar I’m using, I did have to change one reg. setting for the battery as it was off by 1% (big deal) but that was it.
I'll play around with mine and see if I can replicate the problem.
signal
maybe im using the wrong fix, i have tried several taskbars, always no change to the stock white signal icon. then i used the fix above and the icons were all there, just the signal bars did not show the actual sig strength that say the comm manager showed. it was one and two bars like it should then the signal at 3 actual would still show only 2 and only 2 for an actual signal of 4 then when the signal hits 5 the bars will jump and show 4? while im on a call the signal strength is accurate. i do not know. it was hard to get the signal icon to change from stock and now the signal strength is not right. my phone is att pure wm6.5 stock rom etc.
Ahhhh…. This fix is specific to the LG Expo and IQ (I Think), that be part of your problem.
woodhole said:
Ahhhh…. This fix is specific to the LG Expo and IQ (I Think), that be part of your problem.
Click to expand...
Click to collapse
no it should work on all phones. All this fix does is take away a reg key that tells the system to use an alternate dll. His pure should be in same as our expo.
When i ahve time ill make up another cab 4 u to try.
jug6ernaut said:
no it should work on all phones. All this fix does is take away a reg key that tells the system to use an alternate dll. His pure should be in same as our expo.
When i ahve time ill make up another cab 4 u to try.
Click to expand...
Click to collapse
I stand corrected
I have compared my signal strength bar to the one that shows on S2U2 and they both show the same signal strength (even on 3G).. so mine seems to confirm it's working correctly.
woodhole said:
I stand corrected
I have compared my signal strength bar to the one that shows on S2U2 and they both show the same signal strength (even on 3G).. so mine seems to confirm it's working correctly.
Click to expand...
Click to collapse
well this fix has nothing to do with the how many signal bars actually get shown, only which dll is being used to show them.
when i have time(i know same old story xD) ill go have a look at the stock dll and compare to the ones we are using. it is possible that the entries are different which would cause it to show the wrong ones. but i dont think so.
signal bars
fellows i cannot tell you how much i appreciate the effort, i figured the fix would be ok to use on my pure, just dont know why the correct bars will not show on taskbar icon. as i said when on a call the correct number of bars show on icon and comm manager, again thanks for any help. i will be glad to try whatever you can figure out.
For some reason, when my Nexus One uses 3G and GPS together (i.e. Google Maps), after the program is closed, the 3G doesn't work anymore. I need to restart my phone for it to work
Any idea what the problem is?
If it helps, I'm on O2 UK
Noone's experienced anything like this?
Are you using any custom roms?
Nope. Stock ROM
iVisionX01 said:
Are you using any custom roms?
Click to expand...
Click to collapse
Hello there, please I was just wondering if you can help me with a similar question:
I am experiencing similar problem. I recently rooted my nexus one with modaco rom and my navigation system voice guidance is not working. In the notification bar, it shows gray color. The voice will not talk but the map shows. It says "Searching for GPS" at the bottom screen. It gives all route directions and maps though.
Please where can I go to activate the voice guidance or what exactly do I need to do to correct this?
P.S, the 3g icon is not longer visible either, it only shows "H" or "E"
and the wifi is always turn on but not always connected
Thanks
hey guys , sorry if im in the wrong place here , i have an issue with my htc pure that has me on the edge of pulling my hair out lol, i live in an edge network area and i get a very poor signal no matter what i do. is this a radio issue , or i mean , ever since i had the phone and i am stationary at home ive never been able to get above 2 bars , as my wife has the same phone , and she gets 4-5 bars , can someone please enlighten me on this , maybe should i flash to a different rom and radio , if so can someone point me in the right direction to a fast, stable rom . thanks in advance
I dont know what I did to my captivate, but for some reason the signal strenth icon says "EV" next to it.. I know this is not right since I have a GSM phone with AT&T.. also the Wifi icon now looks like this " | " a pipe. and I also get a weird triangle and some other icons.
i think the GST Galaxy S Tweaker messed with it, but i do not know how to get it bacl.. anyone .. ideas?
thank you?!
Did you make a nandroid backup? If not, you need the original framework-res.apk for the rom you are on.
Greetings guys,
I've also been having issues with the GPS on the OB. I tried the various fixes ( hidden menu settings, different gps configs etc) but the root of my problem is (or atleast appears to be) different. Whenever i fire up GPS status or Google maps, the flashing GPS icon in the status bar won't stay lit for more than 1 second .It's like it's not even trying to get a lock.
I was on the latest stock rom , tried Zeus aswell but to no avail; i have exactly the same issue. I do remember the GPS working (albeit with difficulties) on stock froyo, before i updated.
I'd just like to know ,is this issue the same as the one everyone's facing regarding the inability to get a proper lock, or do i have a hardware issue , in which case i need to reflash to stock and contact LG ?
Thanks in advance for the insight guys, if i haven't provided all the necessary info please feel free to ask, i'm hardly an expert in these matters
Pordalas said:
Greetings guys,
I've also been having issues with the GPS on the OB. I tried the various fixes ( hidden menu settings, different gps configs etc) but the root of my problem is (or atleast appears to be) different. Whenever i fire up GPS status or Google maps, the flashing GPS icon in the status bar won't stay lit for more than 1 second .It's like it's not even trying to get a lock.
I was on the latest stock rom , tried Zeus aswell but to no avail; i have exactly the same issue. I do remember the GPS working (albeit with difficulties) on stock froyo, before i updated.
I'd just like to know ,is this issue the same as the one everyone's facing regarding the inability to get a proper lock, or do i have a hardware issue , in which case i need to reflash to stock and contact LG ?
Thanks in advance for the insight guys, if i haven't provided all the necessary info please feel free to ask, i'm hardly an expert in these matters
Click to expand...
Click to collapse
It sounds like a hardware issue.
Anyway if you can show that GPS isn't working properly on stock Froyo, then you have a good case to request warranty from LG.
Do you have data active?
If not cold lock(without A-GPS) might take as long as 3 - 4 Minutes.
If you do have data active sounds like hardware problem.
Gps is not the best i have seen and tested but works (mostly).
i cant use my gps! i use v20c and change the gps setting with gps status!!!how can i fix it??
excus for bad en!