hello. i flash recently the one plus recovery menu and i cant open install from intern storage. my phone now wont open because there is no any rom flash on and the usb debugging is off because to open the oxygen recovery had to reset it. i am trying to use adb so i will flash a rom but i cant find it in my computer. is there any solution that i can enable usb debugging so my computer will find my phone?
Did you try the unbrick guide at the Guides section?
Sent from my ONEPLUS A3003 using Tapatalk
Related
I was trying to flash a Rom then I ended up in a huge situation that I forgot that my usb debugging was off so if anyone can help please help me
The rom got deleted and now i am stuck
Thanks in advance
Go to download mode
VOL+ (or VOL-) and plug in your USB cable.
Flash the KDZ with software using LG Mobile Support Tool using emergency software recovery option.
Hello, (sorry for my bad english i´m not speak too much) the problem is what i deleted my OS making a hard reset with twrp and i cannot recovery my phone, i tried with ADB, (The pc don´t read my phone in twrp) and with otg the twrp don´t read the usb and the micro sd card the only time what my pc read my phone is when is in fastboot and i cannot make anything in this. Please help me i feel so bad for making this to my phone
My phone is moto x 1053 unlocked retail us
1. Just flash it with RSD lite
2. Flash lastest TWRP and flash anhy ROM.zip
P.S. If your PC can`t see phone on TWRP-MTP-mode - try to mount data on TWRP and look to drivers
St.Noigel said:
1. Just flash it with RSD lite
2. Flash lastest TWRP and flash anhy ROM.zip
P.S. If your PC can`t see phone on TWRP-MTP-mode - try to mount data on TWRP and look to drivers
Click to expand...
Click to collapse
i installed the rsd and detected my phone like a usb stortage, and don´t let me make anything, and the mtp mode don´t works because all the operative sistem and all the options are deleted please help me
SlimReaper said:
i installed the rsd and detected my phone like a usb stortage, and don´t let me make anything, and the mtp mode don´t works because all the operative sistem and all the options are deleted please help me
Click to expand...
Click to collapse
use official Motorola Drivers
Moto Drivers, RSD Lite, and other Unbricking Tools
http://forum.xda-developers.com/general/rooting-roms/motorola-usb-drivers-rsd-lite-firmware-t3042687
Sent from my Motorola XT1060 using XDA Labs
i have all of these on my pc and don´t let me make anything!!
SlimReaper, relax, don't freak out. You have all the tools you need, you just need to know how to use them properly.
Can you still get into TWRP? If yes, then if your phone can be detected as USB storage, how about copying a ROM zip file to it while it's connected as USB storage and then boot into TWRP and flash the ROM file that you just put on it? Otherwise you'll have to flash with your computer using RSD lite like the other guys suggested.
DrvLikHell said:
SlimReaper, relax, don't freak out. You have all the tools you need, you just need to know how to use them properly.
Can you still get into TWRP? If yes, then if your phone can be detected as USB storage, how about copying a ROM zip file to it while it's connected as USB storage and then boot into TWRP and flash the ROM file that you just put on it? Otherwise you'll have to flash with your computer using RSD lite like the other guys suggested.
Click to expand...
Click to collapse
the problem is what the RSD lite detect my phone but whith all N/A like a usb stortage, and i tried to put the rom of android 5.1 and all the packs are bad and don´t install, i´m so frustrated
SlimReaper said:
the problem is what the RSD lite detect my phone but whith all N/A like a usb stortage, and i tried to put the rom of android 5.1 and all the packs are bad and don´t install, i´m so frustrated
Click to expand...
Click to collapse
usb storage isn't what you are looking for
phone needs to be in AP fastboot mode if using RSD Lite
Sent from my Motorola XT1060 using XDA Labs
Get the stock rom from motorola service and after that , flash it using mfastboot mode. I used it a lot of time and i go back to stock everywhere when i softbrick my phone.
Sent from my XT1053 using Tapatalk
Regards to all,
what to do to the specified phone able to use a USB flash memory via OTG cable?
BojanT88 said:
Regards to all,
what to do to the specified phone able to use a USB flash memory via OTG cable?
Click to expand...
Click to collapse
does anyone have an idea?
BojanT88 said:
does anyone have an idea?
Click to expand...
Click to collapse
My device (NEM-L21) doest support OTG.
But if you can or if you have unlock(ed) bootloader, you can install kernel or ROM, which supports OTG. You only cant use normal OTG cable, you need Y OTG cable. It like normal OTG cable, but there is added one USB which is used to power it and you connect it into charger, i think. Search on Google 'Y OTG cable' and you will see. But ROM / kernel support is needed first.
I think I made a big problem ...
Today I unlocked the bootloader, root did, then TWRP and SuperSU. I followed the advice from the forums and youtube. However When you turn on the phone, two things happen: or to use TWRP or appears Huawei eRecovery, which can not be download...
my phone is now unusable. What do I do and where I made a mistake?
any help is appreciated!
Any?
After several attempts to fix my problem now, when I set out to do a reboot TWRP recovery go out me notice: No OS instaled.
Looks like I'm all messed up...
BojanT88 said:
After several attempts to fix my problem now, when I set out to do a reboot TWRP recovery go out me notice: No OS instaled.
Looks like I'm all messed up...
Click to expand...
Click to collapse
https://forum.xda-developers.com/ho...covery-stock-recovery-download-honor-t3521504
Here is stock recovery for NEM L22.
Find stock recovery for your model if you dont have NEM-L22(i might work too, but i dont know) and flash it, proably via fastboot.
Then download stock firmware for your phone, you find it on huawei website. (Or you can try from here https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110)
You should create folder dload in root of sd card and here put UPDATE.APP file, which you extract from stock firmware. Then you should do force update - turn off device, the press all three keys (vol + ol - power) once.
Or you can try to install some custom ROM for our device.
Odesláno z mého NEM-L21 pomocí Tapatalk
I am using Mi A2 6gb/128 and while installing Gcam i think i did something that i dont know .
Now i have magisk installed and Gcam installed but i cant use fastboot mood , whenever i enter any command the mobile fastboot screen goes black with a command "' press any key to shutdown'"
.
i have tried each and every method in this XDA forum but nothing solved the problem .
please any Hero in this thread who can help ?
What exactly did you do? We need more infos to help.
Did you try flashing stock rom in edl mode?
This shouldn't happen by just installing an .apk
had the same problem. try a different computer and or different usb cable
Use a usb 2.0 port not a usb 3 port
Hello to all. I have mi 11 ultra .I wanted to unroot the device. I installed magisk for that,after disabling USB debugging and turning off developer options.After restart, device stuck on boot screen with a black screen.
Bootloader Unlocked
USB debugging is not enabled
I can not enter recovery mode using Volume Up+Power button combination.It does not work.
I can enter fastbood mode using volume down+power combination but usb debugging not enabled.
There is no way i can find, recovering or factory resetting the device.
I need help.
You have to flash miui stock rom in fastboot mode , using windows pc.
Bobfish said:
You have to flash miui stock rom in fastboot mode , using windows pc.
Click to expand...
Click to collapse
May i use it while developer options turned off and usb debugging disabled? When i plug it to windows pc,while the phone is at fastboot mode, device manager does not detect any usb.
You
muraxz said:
May i use it while developer options turned off and usb debugging disabled? When i plug it to windows pc,while the phone is at fastboot mode, device manager does not detect any usb.
Click to expand...
Click to collapse
Download and latest adb drivers.
Older drivers can't detect the phone.
Use windows 10 , there could be issues with windows 11 with adb/fastboot.
I used my old phone's cable and it was detected. Mi flash tool did not recognize but mi flash tool pro worked. I flashed the EEA rom. Since i am not familiar with all the stuff, it took all of the night.But i managed to make it work. I can not thank you enough for your answers.