Related
Hi guys,
I have a Nexus 7 3G tablet which was running android 4.2.1. I had flashed a custom apk to enable tethering .
Now, to enable flashing, I copied the original framework-res.apk file and replaced the modified one. Then edited the prop file to eliminate the getprop error . This enabled me to start flashing. Flashing happens all the way to the booloader then fails while flashing radio. it gives the following error
Code:
writing radio...
assert failed: batch.update_modem("/radio/SAM_6260_ALL.fls")
Error in JOP40D.zip
(Status 7)
Aborted
any suggestions would be great.
sayantandas said:
Hi guys,
I have a Nexus 7 3G tablet which was running android 4.2.1. I had flashed a custom apk to enable tethering .
Now, to enable flashing, I copied the original framework-res.apk file and replaced the modified one. Then edited the prop file to eliminate the getprop error . This enabled me to start flashing. Flashing happens all the way to the booloader then fails while flashing radio. it gives the following error
Code:
writing radio...
assert failed: batch.update_modem("/radio/SAM_6260_ALL.fls")
Error in JOP40D.zip
(Status 7)
Aborted
any suggestions would be great.
Click to expand...
Click to collapse
Flash stock recovery. Update via sideloading. Profit!
Just in case you are interested in the cause: Current custom recoveries for tilapia are missing the "bach.modem_update" function (not really sure if all of them).
frikisama said:
Flash stock recovery. Update via sideloading. Profit!
Just in case you are interested in the cause: Current custom recoveries for tilapia are missing the "bach.modem_update" function (not really sure if all of them).
Click to expand...
Click to collapse
if i flash stock recovery, i will lose all my data. any other possible solution, which would enable me to keep my data?
sayantandas said:
if i flash stock recovery, i will lose all my data. any other possible solution, which would enable me to keep my data?
Click to expand...
Click to collapse
No, you won't. I said stock RECOVERY, not stock IMAGE.
Code:
fastboot flash recovery stockrecoverysname.img
OK. So could you give me a link to download the recovery image ?
Sent from my Nexus 4 using xda app-developers app
Do you have the original factory image from google? The recovery.img is inside,
if not i will upload it somewhere, though it doesn't fixed the radio update error for me.
I now have a mixed version > the ota update installed without errors, the bootloader is 4.18 but
in settings it complains to still be at 4.2.1 JOP40D
Flashing the stock recovery only leads to an unusable recovery screen with no options for flash/sideload
with an red exclamation mark over the chest of the sweet robot..
any ideas?
maybe i have to reflash my nandroid and try again, the custom recovery was openrecovery-twrp-2.4.1.0-tilapia
here are the images for those who need them
nakasig-jop40d-factory-efcec044.tgz
http://www.share-online.biz/dl/0OWHBFIMLC
recovery.img
http://www.share-online.biz/dl/LM9JBFIMKSG8
EDIT:
Ok finally i was able to use the stock recovery. though it seemed to be dead.
By pressing power+volup showed the recovery menu for me.
Then flashing the update via sideload worked.
cheers phk
Im trying to fix my phone out of a what it looks like a write protected or freezed state, you can watch more here http://forum.xda-developers.com/moto-g-2014/help/phone-write-protected-freezed-t3030812 , and wonder if its posible to modify an original rom such as Blur_Version.21.11.17.titan_retuaws.retuaws.en.US to just look for watever i had instaled on my phone and ignore it and keep on going with the installation instead of aborting it?
Because most roms i try to install via original recovery via sideload , the either give me the fingerprint error expecting the phone to have another system installed, or they just simply abort the instalation.
This is for a xt1063.
And by modify an original i mean to modify it and repack it again to be able to use it on the original recovery, not on twrp or philz or fastboot, as i have tried that several times.
Thanks for your time and posible help
abispac said:
Im trying to fix my phone out of a what it looks like a write protected or freezed state, you can watch more here http://forum.xda-developers.com/moto-g-2014/help/phone-write-protected-freezed-t3030812 , and wonder if its posible to modify an original rom such as Blur_Version.21.11.17.titan_retuaws.retuaws.en.US to just look for watever i had instaled on my phone and ignore it and keep on going with the installation instead of aborting it?
Because most roms i try to install via original recovery via sideload , the either give me the fingerprint error expecting the phone to have another system installed, or they just simply abort the instalation.
This is for a xt1063.
And by modify an original i mean to modify it and repack it again to be able to use it on the original recovery, not on twrp or philz or fastboot, as i have tried that several times.
Thanks for your time and posible help
Click to expand...
Click to collapse
I dont know if a OTA.zip can be modified but, say it can and we get it to attempt to flash- 1) have you any idea what is wrong / corrupt in 1st place and if like you/me/others believe its corrupted / write protected as a OTA zip flashes along same way as ADB and TWRP - it will most likely fail
Also you misunderstand that a OTA.zip is only a update and not full firmware..... it merges with older firmware - it does not replace / wipe it just updates apps / files to newer versions .
So you need to do a full firmware flash with wipe but you say this fails??
if you tell me what firmware you have on or want to go back - i will try to download and make a easy installer for you.
but i'm thinking corrupt partition needed linux to fix / wip or format
thanks for your reply, then will close this and continue with help on my other topic,thanks again.
wrong place
Greetings and all that.
As a hand-me-down, I got my sister's old Motorola Razr i. Now, my idea was to install Hazou's unofficial Cyanogenmod on it, since Motorola doesn't seem to provide updates any more. The device is factory reset, bootloader unlocked, zip in the SD-Card's root ... but when I want to install, it aborts after verifying. Haven't done this before (better brick an old phone than a new one), so maybe I missed something. Help would be greatly appreciated.
Current Android version: 4.1.2
Current Kernel version: 3.0.34
I use CWM Recovery v6
You should try to toggle signature verification (for me it's under "install from zipfile" -> toggle signature verification. That worked for me a few times.
@rhd1989: this can be a bad idea, and could brick the phone.
@Bibliothekar: do you have an error message? what recovery are you using TWRP?
If the flashing is constantly failing, you'd better download the zip again, check its md5sum and retry to flash.
Hi,
I'm having a problem installing TWRP on my doogee X5, in order to root the device. I have tried to flash the recovery with sp flash tool, and every time I try, I can boot to the boot mode menu, select "recovery" and see the doogee logo for a while, then a black screen, then the doogee logo again, following into a normal boot.
This is the X5, not the X5 pro.
firmware on phone: "DOOGEE-X5-B-Android5.1-2016.03.18"
Any help?
PS: I don't want to use kingroot to root the phone, as I also want xposed.
I'm looking for a solution to that very problem too. Let's see if someone comes to help!
Exactly the same goes here too. Probably there's not an updated TWRP for V18 which I am using. I have not the slightest idea who could help us.
Rooting Doogee X5 / TWRP install
Here's what worked for me, thought I'd share this.
Out of the box was on version 18 and wanted to root , so i blindly installed King Root which did work, i then installed Supeer SU me which changed the king root to super user. After that over a week i read that TWRP 3.0.2 worked for one person so using Flashify i flashed the recovery image , after changing it to recovery.img and it worked . Such luck right, i went on to read the forums as im in love with this device , Wakefield helpful was NEEDROM.com , you need to register but there are many roms and tools for mediatek 6580soc . Out of curiosity i downloaded some rar. File roms ACS different fish tools. The best to use if you've only got oneX5 is SP flash tool. Also look for mediatek vcom drivers which auto installs the correct drivers. There are easy to follow you tube videos fur flashing using SP Flash tool. The latest version had been updated for simplicity. the process basically is ( load .bin file in its respective area,( from Flash tool) and load scatter.txt in its box ( from rar. File) the whole interface will polemist populate plug go to format hit start plug in turned off phone without battery, it'll give red then yellow bar and a check, then unplug hi to firmware screen and choose to start dload only except bootloader, start , plug wait for coloured bars and check your done. i even had gotten errors due to a faulty dload and repeated the process till i got it. I understand that not all have the patience for this, therefore i suggest using flash tool of king root messes up though that's rare.
An alternative to supersu me is to root with king root then install twrp with flashify then you can uninstall / repack king root and flash Updateroot.Script available by someone on needrom. That includes super user and busy box. Then installxposed. Etc.
* Each process in the above proven tuturial has been obtained online from other sites not just xda. I've chosen 5.1 as an idealOS for me, I can't say the route to take fur Marshmallow.
This is for -b and non b only version 18, and 19. All others take your own chances but it's resilient chip so have fun.
(SOLVED just flash DOOGEE-X5-HOT2-6.0.zip and the twrp from the rom is installed and works after rebooting in recovery mode.) after flashing CWM recovery
Listed: 10/28/2016 11:16 pm
ROM Version: 6.0 / 5.1 to my doogeex5 (flashing succeed) i got an green android logo with an error sighn(see picture)and some chinese letters...
in normal boot no problem,also upgrading to android 6 (flashed) gave no problem...
how to get new recovery(flashing other recovery`s gave same output exept the chinese sighns disapeard)
kingroot V4.80 couldnt root my doogeex5 after 27%rooting it says cant root device
also doesnt the system update in `my device` recognice the memory card ...no sd card inserted...
any suggestions?
I have a similar problem. Unlocking the boot loader works fine, but i can't seem to find a working twrp file for my phone.
I have an X5 pro (x5pro-android5.1-r17-2015.07.01). I tried different twrp recoverys from needrom and i can flash them to the device, but if i try to boot into recovery i only get the robot with the red warning triangle. Rest of the phone works fine, but i'd like to get a working custom recovery.
Can anyone help me?
So i rooted my phone with kingroot and i wanted to install a custom recovery without breaking the device how should i move next ? My X5 is an old motherboard version android 5.1 V15-2015.11.02 and that was the last official fota update for me. Is there any ofgicial upgrade suitable for my model like android 6.0 ? Two more things. My battery goes down rapidly and i dont know if its battery or chargers problem what should i do ?
http://www.needrom.com/category/doogee/serial-x-doogee/x5-doogee/
even without rooted phone you can flash a lot of roms from above link and read how to
Yeah i noticed this site man but says you need to register first. And one more thing spft always detects scatter files as invalid or maybe not legal even from the official site of doogee. I use the spft from doogeemobile site.
I am using SP_Flash_Tool_exe_Linux_v5.1520.00.100 with ubuntu(linux) maybe try an other flashtool edition,registering needrom is simple just making username and make a password when you are registered take the inifix hot 2.6.0 for the x5 flash it and you have got also a TWRP from wich you can root or install also the .zip roms etc.
I mentioned the inifix hot2.6.0 because that was the one i had succes even with a bricked recovery caused by flashing a cwm recovery without rooting first.
Well i just want for sure make a backup of my current rom without wiping it. I guess the infinit will delete all. Plus i also want to install recovery having rooted it 1st which is easy i think on 5.1. I have the one with the old motherboard not the -b. To sum up i want to install the official updated rom V20 via sd (which i tried and didnt work) luckily it didnt brick or via spft which doesnt load scatter file says is not valid no matter if i use latest or older version of spft in order to flash it manually. Its risky to root and install a recovery by an apk without having my rom backed up 1st. And even with the spft i cant do that. I just want to fix my battery status. Thats all. I use xp pro os.
indeed it is hard to install android 5.1 roms on the doogee x5with a twrp,al the 5.1 roms i could flash,but then i bricked the recovery,wich made no differend for the installed 5.1 roms,they just work.i can only install a working twrp by flashing Infinix Hot 2 6.0,wich is a 6.0 rom,but as far as i know you cant install a 5.1 rom with a 6.0 twrp... error 7.
Thats why we will end this discussion for now and wait for future solutions. Thx for your concern man. I just dont want to brick it since it runs smoothly with 5.1. As i said before i wanted to install the latest (official stock) V20 rom recently released. But i cant do it even from the tutorial that exists on their forum. It's a use of spft but i cant manage to do it. Scatter file always invalid.V20 Rom fixes some bugs and displays your interface like on 6.0 android version. We talk mate.
Hello !
Any news on the matter ?
I have got an X5 with Android 6 (!) on it. Have tried to root it with several one-click tools but this does not work.
Any suggestions?
Hi! What room do you recommend The most stable, And best, Under flashtool To Doogee X5? Thanks in advance for help!
hello i need help on my doogee x5 all 6.0 custom rom flash give me error 11 on twrp how to fix please ,
Any help please?
I have error 7 on all rom
Help?
Having tried to install TWRP it is rejected
Having downloaded twrp_x5max.img from needrom and used the adp method of installing the TWRP.img (https://www.xda-developers.com/how-to-install-twrp/). I get the following error message. "writing 'recovery'...
FAILED (remote: download for partition 'recovery' is not allowed".
So How do I get the TWRP img loaded into the Doogee X5Max (not pro) android with marshmallow?
I have tried using SP FlashTool and it says installed successfully, but I still get the default recovery program, after the dead robot with triangle and a exclamation mark inside, when booting into recovery using keys or adb command.
Is there another way of getting this image file loaded into the recovery partition?
I have followed all the set up steps in developers mode, so why cannot I use adb?
Hello,
english powered by google
I desperately my Xperia SP on Android is trying to switch 4.4. Unfortunately, most Totourials are useless, alone because very often missing files or they are just out of date.
After so many problems I managed to flash my Xperia. Unfortunately nothing had the desired effect due to the files.
Currently I have the following problem which I do not get resolved:
I have loaded with the Flash tool the Cyanogenmod bootfile via fastboot, earlier I had installed CWM course with USB debugging and deactivated Bootlock. ect.
Unfortunately, he did not start the CWM but the CyanogenMod and I did not have the possibility to install the ZIP file on the SD card. Instead, I've obviously just all deleted.
Currently I have no system, but only the CyanogenMod. A flash on Standart is suddenly no longer possible FAILED (remote: Download size too large). Even when I extracted the System.sin I had problems to start them in fastboot mode.
I had previously done with older files, unfortunately the installation was on the ZIP file in recovery mode error. Why I have updated the files and all programs.
Restoring the standard firmware previously ran flawlessly ...
So I really do not go on and am really desperate.
I very much hope that my one helps the more clueless than me.
Best regards,
Ben
So i assume you now have installed official sony firmware? If yes , and you have unlocked bootloader then all you have to do is install twrp recovery(TWRP recovery for Xperia SP), then download Custom rom(i.e Cyanogenmod-Cyanogenmod builds for Xperia SP), if you like also google apps(OpenGapps) and install trough recovery. It might seem difficult, i know i did not explain it very good but its late... If you have any question or you want me to write a tutorial how to install cyanogenmod step by step just tell me.
Edit: even if you cant access the system it will be easy to install cyanogenmod
Problem Solved:
Flashtool was the Problem. I used the newest Version. After a Downgrade to 9.8.16 it worked.
Thank You very much