I am trying to set up a profile for sleeping where my volume is off and no vibrate. I have it set up to trigger when I plug it in for charging and that works fine, but the action is evading me.
If I use dnd then when it "wakes up" (turns off dnd in the exit side) it plays my current notification sound which wakes up my wife.
If I try to set volume to 0 I still cannot turn off vibrate.
My phone (s8+) has a "sound mode" with sound/vibrate/mute but I can't find the corresponding tasker action to set this.
My desire is to have both ringer volume and notification volume 0 with no vibration. I don't want any sound or beep or vibration to happen when I end this profile. (If something causes a notification at that moment I understand that it will beep - what I am trying to avoid is the beep which is generated automatically exiting from the profile).
Does the "audio -> vibrate mode" action not work?
"Good judgment comes from experience, and a lot of that comes from bad judgment." - Will Rogers
Related
In Kit Kat, I held down the power key for a second and was then able to select different sound profiles depending on where I was.
In Lollipop, the only option I get is Power Down!
Have the toggles moved somewhere else?
They have been removed, the tap the bell icon in the volume bar (through the rockers), it will set to vibrate. And then, there is the priority settings to mess about - no silent mode, for now; perhaps on 5.1!
Cool thanks
Press one of the volume buttons. Then tap "None". That will set your phone for no interruptions which is what I'm finding to be silent mode. You can set some contacts to have a priority and use the priority setting to allow certain contacts to still ring.
mills2533 said:
Press one of the volume buttons. Then tap "None". That will set your phone for no interruptions which is what I'm finding to be silent mode. You can set some contacts to have a priority and use the priority setting to allow certain contacts to still ring.
Click to expand...
Click to collapse
Note that this will only work until the next time Moto Voice is invoked (purposely or accidentally); then the phone will set the ringer volume to 60% and leave it there.
WTF?
Solutions Etcetera said:
Note that this will only work until the next time Moto Voice is invoked (purposely or accidentally); then the phone will set the ringer volume to 60% and leave it there.
WTF?
Click to expand...
Click to collapse
Yeah, I think that's clearly a bug. Hope they can fix in next release.
I have a profile in Tasker that is supposed to set the phone to silent mode when I have a meeting scheduled. It works fine, has always done, until I got the OnePlus. The OnePlus has its built in system of Ring mode, DND mode and Silent mode which are triggered by the three step hardware switch on the side of the phone.
What happens is that when my "In a meeting"-profile triggers (and my phones hardware trigger is set to Ring), Tasker tries to set the volume to 0 but since the Ring mode prevents it the volume only goes down to 1 (out of 7 steps).
Someone tipped me of an app called "Sound Profile +volume schedule" which actually managed to change the volume to 0 in my phone when I applied the apps "silent" profile!
I however am not that clever at this (yet) that I can figure out what this app called on to make this happen.
But I'm counting on that some of you smart guys and girls here might know!
Thank you!
EDIT:
I have no ****ing idea how I suddenly got this to work but here it is. A silent profile in Tasker while slider is set to ring mode.
Volume is 0% and not 15% as it has been for a while for me. The ****er just suddenly gave in and works!
https://drive.google.com/folderview?id=0B6O1zb-OcKDmU2xUV21HMVlfM3c
rage77 said:
I have a profile in Tasker that is supposed to set the phone to silent mode when I have a meeting scheduled. It works fine, has always done, until I got the OnePlus. The OnePlus has its built in system of Ring mode, DND mode and Silent mode which are triggered by the three step hardware switch on the side of the phone.
What happens is that when my "In a meeting"-profile triggers (and my phones hardware trigger is set to Ring), Tasker tries to set the volume to 0 but since the Ring mode prevents it the volume only goes down to 1 (out of 7 steps).
Someone tipped me of an app called "Sound Profile +volume schedule" which actually managed to change the volume to 0 in my phone when I applied the apps "silent" profile!
I however am not that clever at this (yet) that I can figure out what this app called on to make this happen.
But I'm counting on that some of you smart guys and girls here might know!
Thank you!
Click to expand...
Click to collapse
This is a few days old so maybe you've moved on. There are apps that will capture intents, maybe that is a way to find out what the Sound Profile +volume schedule app is doing. Then you could send the same intent through tasker. Else, instead of lowering the volume a workaround might be to switch the ringtone to silent. Then there is always AutoTools.
I have no ****ing idea how I suddenly got this to work but here it is. A silent profile in Tasker while slider is set to ring mode.
Volume is 0% and not 15% as it has been for a while for me. The ****er just suddenly gave in and works.
https://drive.google.com/folderview?id=0B6O1zb-OcKDmU2xUV21HMVlfM3c
Hello,
I am curious if there is a way to disable sound profile switching feedback. For example when going from Normal to Vibrate there is a vibration, when going from Silent to Normal there is a beep. Also when using the Volume Up and Down buttons there is a beep. I want to disable it.
Best regards.
This beeping while adjusting volume with the side buttons is driving me crazy. The worst thing I have ever experienced with a phone. On my last galaxy there was option to disable the sound preview.
I'm running COS 6.1 A.10 on my unrooted/unlocked European X2 Pro.
When I press the physical volume buttons, I very often don't see the sound control popup. Sometimes it appears and I can change the volume, but in most cases it doesn't appear at all. It doesn't make a difference which app I'm using - YouTube, Prime Video. I don't have an active BT device linked or a headset plugged in either. Quiet Time is turned off, all volumes in Sound & Vibration are turned to medium, the default function for volume buttons is set to Media Volume although nothing changes if it's set to Media Volume.
I used to have MacroDroid to change sound settings based on time/location/events but that's uninstalled. I still have Do Not Disturb which mutes my phone during calendar events. Regardless of any such apps, I should still be able to use the volume buttons to adjust the volume but there are no popups most of the time.
I just restarted my phone and the volume popup is back. I know this happened before but after a while it's gone again without knowing why. Does anyone have an idea what could be the reason and how I can get my volume popup back permanently? Thanks for your help.
Hi.
sometimes (at least once a day) it happens to find the volume of notifications at 0. The volume of calls, system and multimedia are ok, that of notifications is set by itself to zero.
do you have any suggestions on what it might be?
Do you have any automation turned on? (Bixby Routines)
I use DnD during the night, but it is set like the other phone