Related
Q&A for [RECOVERY][victara] TWRP 2.8.0.1 touch recovery [2014-10-20]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][victara] TWRP 2.8.0.1 touch recovery [2014-10-20]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
dmbfan13 said:
Has anyone been able to install via TWRP Manager? every time i select "select device", it crashes. Anyone else?
Click to expand...
Click to collapse
I was unable to install via adb, so i tried using the app, it worked perfect.
Question
Hi, first at all: sorry my english, i'm a little rust; i have an Moto X 2014 (xt1097), with Android Lollipop (22.21.17.victara_retbr.retbr.en.BR amxcl), does this version of TWRP works 100%? O almost? i'm most interested to get Root and instal a recovery, my (sold) Moto x 2013, have TWRP and root. honestly, i want root to use Power Toogles, should i have to change the recovery? Or only with root can use it?
Twrp is good except time and date
Question
michyall said:
Twrp is good except time and date
Click to expand...
Click to collapse
Hi, sorry but what do you mean about time and date? It changes time and date on cellphone? Thanks
Yup. Every time i go into twrp date is wrong. Usually 6 days before and time wrong too.
When booting phone i get whatsapp time and date error: no trouble, when radio signal is up android is synchronizing and everything return right. Except twrp.
Have read about a bug
Cant make a backup TWRP
I get the error:
Backup complete. Failed.
unable to create backup folder errno=13
Using either twrp-2.8.6.0-victara or twrp-2.8.5.0-victara
Before trying to use 2.8.6 I could.
Thanks
Revert back to stock recovery on xt1092?
So I flashed TWRP on my xt1092 but I want to revert back to stock recovery. How to do it? My Moto X came with lollipop 5.0 with build no. LXE22.46-19
5.1 Support
Just upgraded to the 5.1 soak test (23.1.28) from a clean 22.46-11 installation and can no longer flash twrp (I tried 2.8.0.3, 2.8.0.5, 2.8.0.6, and crpalmer's unofficial build). They all complain about mismatched partition size, and if the flash is successful the recovery partition must be overwritten immediately by the stock recovery. I'm hoping someone comes up with a workaround or new build soon.
kevind23 said:
Just upgraded to the 5.1 soak test (23.1.28) from a clean 22.46-11 installation and can no longer flash twrp (I tried 2.8.0.3, 2.8.0.5, 2.8.0.6, and crpalmer's unofficial build). They all complain about mismatched partition size, and if the flash is successful the recovery partition must be overwritten immediately by the stock recovery. I'm hoping someone comes up with a workaround or new build soon.
Click to expand...
Click to collapse
Flash from within Android and it will stick.
korockinout13 said:
Flash from within Android and it will stick.
Click to expand...
Click to collapse
How can I do that? Thanks!
EDIT - I'm an idiot, I didn't boot into recovery straight away after flashing the image, so it was overwritten on boot up.
kevind23 said:
How can I do that? Thanks!
EDIT - I'm an idiot, I didn't boot into recovery straight away after flashing the image, so it was overwritten on boot up.
Click to expand...
Click to collapse
Sent from my XT1095 using XDA Free mobile app
Guys, fast question. I've flash stock firmware, flash twrp latest version, then cm and start setting up, deleted some apps wipe Cache and dalvik and when I tried to reboot into recovery to flash a kernel it just boot loops into recovery boot image.... Phone is working great, but can't get into recovery.... Any idea? Already tried flashing previous version and same result
Enviado desde mi XT1095 mediante Tapatalk
I installed this recovery 1 month ago, but now i am trying to boot into recovery but it stucks on TWRP screen, there are no menus like backup, install etc, it just stucks on twrp blue screen. Even i flashed older twrp 2.8.x.x by fastboot mode but same thing happens only twrp blue screen...?
Could someone help me?
P.S: it was working fine 1 month ago when i flashed RR.
I have the exact same issue on my Xt1060. It has flashed several Roms fine, but hangs up on the TWRP blue screen too! I also reflashed 2.8.7.1 with no difference. Any ideas?
I uninstalled twrp and rebooted the phone. I then reinstalled twrp using 2.8.6.0 version. I rebooted and tried opening the recovery. It now works fine. I have since installed the cyanpop nightly and updated happy. Phone works!!!! Not sure why but it does. I will stay with the older version. Thanks.
Guys, I'm having this problem, I'm on 3.0.0.0 and every time I wipe Cache and dalvik/art Cache (I'm on stock marshmallow only tip root and krait kernel) it doesn't wipe anything..... Any idea? Or what do I have to do?
Enviado desde mi XT1097 mediante Tapatalk
On version 3.0.2-2 I get a corrupt zip file error every time I try to flash. This has happened 5 times since encrypting the phone with two different ZIP files.
Is this due to TWRP not supporting Nougat encryption?
Is this resolved in 3.1.0?
Sent from my 2014818 using Tapatalk
I recently bricked my phone and recovered using the RUU, after it all loaded I unlocked the boot loader again, flashed recovery and flashed superu but every time I do it gets stuck in a boot loop forcing me to recover with RUU again. Any ideas as to why and what I can do?
gourleyar said:
I recently bricked my phone and recovered using the RUU, after it all loaded I unlocked the boot loader again, flashed recovery and flashed superu but every time I do it gets stuck in a boot loop forcing me to recover with RUU again. Any ideas as to why and what I can do?
Click to expand...
Click to collapse
Use this SuperSU zip: https://www.androidfilehost.com/?fid=24269982087018189
Thanks worked like a charm, now if only get xsposed to install and not stick me in a boot loop lol
gourleyar said:
Thanks worked like a charm, now if only get xsposed to install and not stick me in a boot loop lol
Click to expand...
Click to collapse
Glad it worked for you
And for xposed these are the ones that seem to work
This version works for the Metro pcs 626s: http://forum.xda-developers.com/desire-626/general/xposed-sdk-23-v86-626s-metro-t3427973
And this one is for sprint: http://forum.xda-developers.com/desire-626/general/xposed-v79-sdk23-arm-6-0-1-t3395232
Thanks for all the help, I was able to get exposed working using http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758 I appreciate all the help and everything runs like a dream now.
RE question
gourleyar said:
Thanks for all the help, I was able to get exposed working using http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758 I appreciate all the help and everything runs like a dream now.
Click to expand...
Click to collapse
What was your version of android is it 6.0 and what is your carrier ? please respond thx
Hello lovely XDA-members,
this morning a new OTA update/patch came out for my OnePlus 3T, so I downloaded and tryed to install it right away. My phone is rooted on android 7.0 and I have TWRP 3.0.3-0 installed as my recovery. Normally (when I updated to nougat) after downloading a new update the phone reboots itself into TWRP and installs the update by itself, but not this time. I had to seqrch through my phone and had to install thw update manually. After that I rebooted the phone and it started booting the TWRP recovery again, I tried it again and again and again, nothint changed. So I tried to restore my backup with everything functioning, but this wouldnt help either. :/ I read the few existing threads with this problem and heard of a recovery flag that isnt cleared and the bootloader being the problem. One solution that I found was only for an LG phone and I'm afraid that I'll brick my brand new phone I have absolutely no idea what to do now, I would be so happy if someone could help me with this :$
I thank you in advance <3
Encoutered the same problem. Either you reflash the official or twrp recovery (neither did the trick to me) or use this "emergency tool" (which helped me):
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
Btw: TWRP 3.0.3-0 is not working well, switch to 3.0.3-1 beta
Good luck to you
I had the same problem.
How you can ''unbrick it'':
1. Flash a any rom available for the oneplus 3t via twrp
a. after this you will be still in twrp bootloop, to solve this go to step 2
2. Flash back stock recovery via twrp
Now your system will boot again
Optional: Flash back twrp
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Isus <3 said:
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Click to expand...
Click to collapse
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
EYT said:
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B0pr-ZA5b-1pNVlxV3ljMUFaUHc/view
Thank you so much, it worked
EYT said:
Thank you so much, it worked
Click to expand...
Click to collapse
No problemos my friendos
Hello guys,
I tried to go back to stock on my OP3T from LineageOS.
I formated too fast my phone - and there was first problem.
After that i flashed stock recovery and tried to flash by ADB sideload a stock OOS.
I've got an error that cmd couldn't read the .zip file. So i started to looking for a solution.
I've flashed twrp recovery, tried there an ADB sideload but doesn't work as well.
When i tried install zip file i got error "its not Oneplus 3t device its "" device installation aborted"
I tried flash firmware/modem zip from jamal2367 and still nothing works.
I found a solution to change recovery to a blu spark recovery and when i tried to reboot my phone to bootloader.....
Badoom !
Now i can't start, reset, charge, anything my phone.
Anybody any idea???
Sorry for my bad english...
[email protected]@@@@@@@@@@@@@
If anyone will have same situation...
https://www.androidexplained.com/oneplus-3-unbrick-return-stock/
That helped me, and i have to say lt helped me on win10.
Phone was really really bricked hope it'll help someone someday !!!!!
best regards,
SzniQ
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
LloydSmallwood did a great Tutorial
It helped me a lot.
Hi Friends
I just got the message from TWRP app that there is a new version available. I just installed it through the app and then rebooted the phone.
And now the problem: It boots only into TWRP. I can't boot anymore into OS! I tried to flash with adb the former TWRP version and vbmeta. But it doesn't help. It still boots into TWRP only.
One strange thingt is, when I reboot, it shows me the "relame - Powered by Android" page for afew seconds. Then the page goes away for a second or so and it restarts again, and goes into TWRP.
Please help me. I urgently Need the phone.
Thanks a lot!
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
jhha said:
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
Thank you! Unfortunately this is different problem and CN version.
Has anbody else an idea. Please!
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
zsonnguyenz said:
Flash ozip stock, if it does not go up. format data and wipe cache & dalvik-cache. Reboot
Click to expand...
Click to collapse
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Sir Backe said:
Thank you! Formatting data with the way, where you have to confirm with "yes" worked! Only this was necessary and it booted again to OS! Fortunately I could make a data backup with TWRP. But now the big question: I have a system with unlocked bootloader and C24 OS, as well as working FP. How to install now TWRP and Magisk, and how to get back the data?
@exadeci, @jhha
I guess you have experience in this. Would you be kind enough to share?
https://forum.xda-developers.com/showpost.php?p=81509817&postcount=78
https://forum.xda-developers.com/showpost.php?p=82131605&postcount=13
Click to expand...
Click to collapse
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
zsonnguyenz said:
I cannot flash magisk, it always bootloop, except the first time it is unlocked. And I am currently using the lieage rom. Did you flash it?
Click to expand...
Click to collapse
Yes I did. The canary version (see below the list on this page, section "Download"). Before I installed TWRP 3.3.1.13 and vbmeta.img, which I got from here (see section "To flash the TWRP" -> Modified VBMETA.
Hi Friends
After a long night with almost no sleeping I finally got a running system with TWRP 3.3.1.13, modified vbmeta.img, Magisk Canary and OS c24. For the first time in my life I bricked a phone just in various ways, one after the other. 2 horrible days are behind me, and i could only finally get a back a working system thanks to all of you, who supported me either in this thread or in various others where I was reading and actively asking questions, depending on the Problem I just had.
Thanks a lot to all of you. You are a great communitiy!