I tried to update my Swm 8802 but forgot to delete the old update (I was told this was important) and now the screen is all black... is there any way I can connect it to the pc so I can delete everything and try again? or other solutions would help, thanks =)
cptnbull**** said:
I tried to update my Swm 8802 but forgot to delete the old update (I was told this was important) and now the screen is all black... is there any way I can connect it to the pc so I can delete everything and try again? or other solutions would help, thanks =)
Click to expand...
Click to collapse
If you have an old PC power supply, you can attempt to connect the red, yellow, and ground wires to the same ones on the PC power supply. I would try by taking the wires from the unit, and tinning them, then trying to attach them to the power supply.
BE AWARE THAT I HAVE NOT YET ATTEMPTED THIS, SO PROCEED WITH CAUTION! However, being that it is a 12V power supply, technically it should work. Once it's on you may be able to connect it to a PC, but you'll need a double male USB cord. You might also try downloading a restore image to a flash drive, inserting it into the USB port, then booting it up with the reset button held down. I know that worked for me on my Android Media Box.
Tnx for the reply
I have tried to find a restore image but I can't seem to find it? Does anybody have a link or something?
Related
I flashed a new rom from the internal storage and apparently there's something wrong with it because the phone just hangs after the initial screen with the radio version and rom version!! Is there a way where I can get into the internal storage to put in a new rom? As far as I'm concern, bootloader still works (the rainbow screen) but I don't know what ot do after that...I've done many hard-resets but to no avail.
Please help!
if your bootloader works, yo can use your USB cable and computer to flash a new rom !
Hold volume down and hit the reset button. It will put you in the tricolor bootloader screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom. Then try flashing the ROM you want.
stupid me, i formatted teh NAND before I posted this thread! Now when i plug in the USB cord, it still says "Serial" and my computer is not able to connect to it. Is there any other way???
See what happens if you now take out the SIM Card and do another hard reset.
It still says "serial"!! Are these my only options? Are there no other way?
That sounds bad. YOur Dimond is not picking up the connection to the PC via the USB cable. Can you try using a different cable also check the pins on the female USB are not bent as i've seen that happen to someone else on this forum.
EDIT: If you have one, try using another USB cable.
I try on another computer and miraculously it picked up the USB drive!! I then ran the RUU and got a working rom in there
Thank you for your help!
For some odd reason I can no longer get the the "serial" status to change to "usb". It charges but does not connect to activesync. I flashed many many times so I am not a noob at this but I might be making a noob mistake.
What I am using: SPL 1.54 (I use USPL 2.5). I am currently using Miri's v23 manilla 2.5. I am using the same pc (xp) and cables to flash.
What I've tried:
- used 3 different pc's and the original pc
- 4 different usb cables
- ticking/unticking the "enable faster data syncing" box in settings>connections>usb to pc
-ticking/unticking "allow usb connections" in activesync
-if I leave the cable in AND THEN put the phone in bootloader mode, the status is blank. When I remove the cable, it returns to "serial"
When the phone is on, it just doesn't seem to react (vista and xp)to the cable being plugged in. The led just shows that it's charging.
I pulled an all-nighter and I'm stumped.
Maybe you need to update the USB drivers. Same thing happened to me but it worked after updating the USB drivers as per this link.
http://forum.xda-developers.com/showthread.php?t=524619
I forgot the most important part-
Since the pc does not recognize that there's something plugged in, I cannot select the "HTC USB Sync" under device manager and proceed with updating the drivers. I don't think I need to but at this point I'm trying everything.
Unless there's another way of updating drivers without the phone showing up on the device manager...
Updated the usb drivers by plugging in an old htc device. The pc was able to recognize the other htc device and was able to switch from serial to usb.
But after the update, there was no improvement for the blackstone status.
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
supadupa111 said:
Anyone? The phone still doesn't recognize the usb cable whether the phone is on or in bootloader, it just charges.
Any help is appreciated!
Click to expand...
Click to collapse
Seems something wrong with your device. Try to hard reset and do it again?
Or if you still cant connect to usb. there is another way to upgrade without connecting to pc. After upgrade to new ROM, try it again whether it can connect to pc or not? Here is some tips for you.
Connect your SD card to PC through microSD card. Copy all files from your SDcard to new folder in your PC. Then, right click on the microSDcard disk-->full Format by FAT32 (this step is very important).
After formatting SDcard, copy back all files to SDcard . Rename .nbh to BLACIMG.nbh (for Blacktone) and copy it to SDcard.
Insert your SDcard back to Touch HD. Turn off your device by Power button.
Go to Boot loader mode. Push and hold Vol. Down + press Power button.
After that your device with have a white screen with text " Press to power button for continue upgrade" press power button and it will start upgrade Rom.
You can check this video for more practical actions on youtube.(this video for HTC diamond2 but it's almost the same with Blacktone just different in rename step)
Hope it helps and cheer
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
supadupa111 said:
Thanks for the tips =)
I've did a hard reset twice and still no luck.
I've tried to flash through SD but since I use USPL, it just hangs when I try.
If I have SPL 1.54.0000, is there something that can be flash through the SD without USPL?
Click to expand...
Click to collapse
I have not tried this. I am on HSPL 1.56olinex but you can try my suggestion cause I think it's the only one you can choose now. I never ever use USPL. I think you can do it step by step and carefully.
Regard
Hi. I apologize for my bad english, I'm from Ukraine
When I press Volume + and insert the USB cable to the phone, nothing happens. How can I restore the boot loader? The method described in this forum (by KDZ) tried. It does not help. I hope for your help. thanks in advance
Shova97 said:
Hi. I apologize for my bad english, I'm from Ukraine
When I press Volume + and insert the USB cable to the phone, nothing happens. How can I restore the boot loader? The method described in this forum (by KDZ) tried. It does not help. I hope for your help. thanks in advance
Click to expand...
Click to collapse
Press and hold Volume Up, then plug the USB cable, your screen should enter the recovery mode. CMIIW.
redy2006 said:
Press and hold Volume Up, then plug the USB cable, your screen should enter the recovery mode. CMIIW.
Click to expand...
Click to collapse
it is doesn't help. when i try this, nothing happens. screen are don't turn on.
Shova97 said:
it is doesn't help. when i try this, nothing happens. screen are don't turn on.
Click to expand...
Click to collapse
Oops, forgot to remove battery first, then Vol-Up and plug USB cable...
redy2006 said:
Oops, forgot to remove battery first, then Vol-Up and plug USB cable...
Click to expand...
Click to collapse
I remove battery and do this steps.
I read this topic - http://forum.xda-developers.com/showthread.php?t=1275315
Can you help me?
If you bricked your phone which is very hard to do you`re fu**.
Only way to bring it back is with Jtag and i don`t think riff jtag can do this job.
Just pray and search a jtag in your area !
the drivers installed correctly ?
Just try it at another computer or install a second and if possible different version of Windows. Then there install drivers and follow guid again. I also had problems under Windows XP already. Then tried it at the same PC, but Windows 7 64 bit and suddenly it worked like a charm I always have dual boot, just in case something doesnt work I play around much with my installations
Easiest way is try it at another PC, idk, maybe a friend's or maybe u have a second one.
Already tried to disable Lg Modem?
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected". But I noticed that this isn't about USB Cable or PC, it's just about the SD Card. So we are going on this.
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Edit: Guys, miraculously, I've solved the problem. I was trying something, I reinstalled PC Companion, SEUS and Gordon's Gate. Tried again but it was the same, no notification. And within a last hope, I tried to use SEUS, so I turned off the phone and started SEUS, miraculously I get to flash mode. Now it's working fine, thank you all for your help. I don't know how did it happen, I couldn't get to flash mode yesterday but now I can. Thanks again.
UP
Any Ideas? I can't listen music, use camera and much more... It really bothers me now.
i like heavy metal said:
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected".
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Click to expand...
Click to collapse
have you tried putting SD card in other device or adapter in computer?
hmm you cant enter flash mode? that is biggg problem i think :/
i like heavy metal said:
Hey guys, I have a big(or not?) problem.
My phone doesn't recognize my SD Card and when I connect my phone to PC via USB Cable, I don't get a notification "USB Connected".
Also I can't get to flash mode by pressing back and plugging USB Cable, it just charges the phone. So that mean I can't use SEUS or similar ****?
I searched this on google and tried something like Automount SD app, factory reset, formatting SD Card to FAT or FAT32 but these didn't work.
I thought it was a easy problem but now I'm a bit afraid. What can I do now? Did I really messed up with that?
Click to expand...
Click to collapse
When you plug in your USB cable, can your PC detect your phone? sometime could be your USB port problem. Try on other PC/laptop, and see the result. If you PC couldn't detect your phone/USB cable, it wouldn't install the correct drivers, so PCC is unless in this case, You have to install Golden Gate driver instead.
Other the other hand, to enter into flash mode, you need to fully power down the phone first ( you didn't describe this step in your post). Then only hold the "back" button and plug-in the USB cable.
@Xmaster8
Yeah, I've tried it on mum's phone and worked.
@saintckk
No, my pc detects the phone, but not at all. I mean that I can charge the phone but I can't transfer files to my SD card. And there is no notification on my phone "USB Connected.".
And my sist just used the PC to put some music on her SD Card, so there is no problem with the cable or computer. There must be something else.
And I didn't get what you mean with "fully power down". If you mean turning off phone, I did this. But if you mean spending all the battery, I didn't do this.
My 1020 got bricked while flashing through WPInternals.
In the middle of the flashing the USB got disconnected and after that I have blank screen. The power button pressing does make phone vibrate. Also soft reset combination makes vibration. However I am not getting anything on my laptop on USB connection. No connection notification. Nothing on device manager. I tried combinations to get it detected but nothing works.
So the question is, Is there any way I can blindly send force flashing to one of the USB port and make it happen ?
JTAG is the only option ?
same me hichic
Flash Mode
Hello,
try this: power off/reset and power on holding vol-up key. You should get a flash-and-cogwheel sign on your display. If so, you cna reflash your (valid) .ffu file using PhoneImageDesigner/Lumia Flash Tools (->google!).
Are you sure your USB cable or port is not broken?
Best whishes,
Joachim
JoachimP said:
Hello,
try this: power off/reset and power on holding vol-up key. You should get a flash-and-cogwheel sign on your display. If so, you cna reflash your (valid) .ffu file using PhoneImageDesigner/Lumia Flash Tools (->google!).
Click to expand...
Click to collapse
Okay, I have already tried that, since the USB got disconnected during boot loader flash, it does not display anything on the screen when I start with power button or reset combo. It only vibrates.
JoachimP said:
Are you sure your USB cable or port is not broken?
Click to expand...
Click to collapse
I have changed the cable too(USB flex cable of my lumia and USB cable too), It does charge battery, does keep flashing the start button once in a while when the cable is connected. I am sure USB is working fine. But not getting detected in PC.
http://forum.xda-developers.com/showpost.php?p=69395504&postcount=4
booker50rus said:
http://forum.xda-developers.com/showpost.php?p=69395504&postcount=4
Click to expand...
Click to collapse
Yup, its same. I had to open another thread in Windows 10 as nobody responded in windows 8. Thanks.