I have this:
profile- if battery 45-0,
task - then power save on.
I want to add a exit task, which turns off battery save if mobile is plugged in. Can't i add this in the same profile? Can someone detail explain how to do this?
Add a second profile context, "not power any".
To do this, long press on the existing battery context. A pop up will appear, choose add, then state -> power -> power. Select "any" and check the box to invert. Save.
Now whenever your battery is less than 45, and the device is NOT charging, the entry task will run. If the battery level goes above 45 OR the device is charging with the device below 45, the exit task will run.
Just to make sure you know, when in the profile tab, long pressing the entry task (green right facing arrow), pops up a menu where you can add an exit task (red left facing arrow).
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Related
I don't know if this has been posted before, but I found this tip on another forum.
HKEY_LOCAL_MACHINE\ControlPanel\Phone
- Create new dword value
- Change the value name to "Flags2" (no quotes).
- Select the 'hexidecimal' button.
- Type 10
- Click ok.
- You should now see in the 'name/data' section:
- Flags2 16 (0x00010)
Now when you are connected to GPRS and click on the bubble on the task bar, it will show a disconnect button to disconnect and show duration. Or, you can press and hold the red hang up button for a few seconds and it will disconnect as well.
Works like a charm. Thanks
Which forum did you find this on? Do they have anything listed for connecting as opposed to disconnecting? Merry Christmas!
The only way that I have found to connecting is through a program that automatically connects (ex. weatherpanel) or GPRS Monitor from SPB. It allows you to connect with a single tap.
I'm using GPRS Monitor to do that, but that's such a small icon to hit with my finger. It works great for the Wizard too.
Yeah, I hear ya. I prefer having the option to connect from the connection bubble on the taskbar like in WM2003. Hopefully it can be brought out by a registry setting like this.
hello
on my old iPAQ with WM 2002, I could hold the power button to show me options like:
- change profile (silent, loud, etc.)
- turn off background light
etc
the most useful, IMO, is in fact the change profile
anyone know if it's possible to remap the "hold power button" to a little menu like that (it can also contain a "shutdown" option)?
advanced config
gonna try it
thanks very much
I need to detect if tap event happened while screen is off.
I just want to skip audio track if I tap twice on screen that is off
and go one track back if I tap on screen three times...
is it possible with Tasker?
As discussed by Tasker's developer in the Tasker Google group, no, it's not possible.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
I have a wall tablet that cannot be rooted so the tasker screen idle function doesn't work.
I read that I can acheive the same thing with autoinputs but I can't figure out how to do it.
Generally, I'd have imperihome always running on the screen. I would like to launch daydream app using daydream launcher if I have not touch the screen for more than 1 minute. Can someone help me out? thanks
I think using create a profile that uses "UI Action" from AutoInput as a context will get you where you want. It should trigger anytime you touch the screen and the associated task contains a wait so if another touch occurs, the task will re-fire and start the wait again. The profile should be configured to abort the existing task for that to work. If the wait completes, then your daydream app can be launched.
"find somebody that you think is undeserving of your compassion and give it to them" - Christian Picciolini
Could someone help me with the below 2 modules please?
Module 1 -
1 - Hardware key (volume or power button ) used to launch a particular app
2 - Once app is launched - Lock the app with an overlay with a particular dimension (for example - overlay blocks the app completely except 20 % at the bottom)
3 - Volume button press simulates screen press at a particular co-ordinate
Module 2 -
part 1 - Shortcut to make direct Whatsapp call to a particular contact
part 2 - Receiver mobile answers the Whatsapp call and places on speakerphone automatically
This will help me stay connected with my aged parents.
Kindly help !!
Mod 1
Profile: Event/Vol long button up/down, then launch the app
Task: Scene; draw your box how you want. You may need/want to lock portrait mode.
Task: Use Auto input to simulate your screen press. You can use the option to view touches from within the phone Settings/Dev Mode
Sent from my Note8