hello friends, sorry for the errors but I'm Italian, I bought a px5 to upgrade my car radio but does not have the gps slot so I have to use the otg cable.
I created the otg cable following your guide in fact my px3 is read and I dump the memory correctly, but with the px5 I have problems.
if I connect the px5 the pc detects unknown device and after 5 seconds it disappears as if I had disconnected the usb but it is still connected.
I thought it was the cable so I soldered directly on the pin all and tried another pc but I have the same defect, with the px3 I read everything and that's fine.
I can not understand the problem.
my video problem : https://www.youtube.com/watch?v=h1XwJGsy5lI
guide: https://forum.xda-developers.com/android-auto/mtcd-hardware-development/px3-5-headunit-mod-recover-flash-som-t3766892
Related
Hi, I am having problems in using Voice Command 1.6 when my ATT Tilt (ROM version: 1.62.502.0) is connected to external speakers such as TV speakers, Car speakers etc. I am using 3 in 1 USB Adaptor to connect cable to speakers.
The problem seems to be with Microphone of the phone which is for some reason being deactivated as soon as the 3 in 1 USB adapter is plugged into the phone. For the first time when I used 3 in 1 USB cable, it worked fine. But after that it stopped working and Microphone is being deactivated as soon as 3 in 1 cable is inserted into phone.
Whereas, when I insert other USB cable such as for charging, ActiveSync etc, microphone seems to be active and I can use Voice Command while the cable is inserted.
Please help. I need the microphone to be active to be able to use VoiceCommand while my phone is connected to my car's AUX port speakers.
[email protected] said:
Hi, I am having problems in using Voice Command 1.6 when my ATT Tilt (ROM version: 1.62.502.0) is connected to external speakers such as TV speakers, Car speakers etc. I am using 3 in 1 USB Adaptor to connect cable to speakers.
The problem seems to be with Microphone of the phone which is for some reason being deactivated as soon as the 3 in 1 USB adapter is plugged into the phone. For the first time when I used 3 in 1 USB cable, it worked fine. But after that it stopped working and Microphone is being deactivated as soon as 3 in 1 cable is inserted into phone.
Whereas, when I insert other USB cable such as for charging, ActiveSync etc, microphone seems to be active and I can use Voice Command while the cable is inserted.
Please help. I need the microphone to be active to be able to use VoiceCommand while my phone is connected to my car's AUX port speakers.
Click to expand...
Click to collapse
you have to use that original htc adapter to connect a universal earphone. this adapter has a microphone in the 3,5 mm plug.
Hi Matthes, You mean, the original htc adapter has microphone builtin?
Also, as I mentioned, my voice command worked properly with my adaptor once (for the first time).
I am not sure mine is original or not, I bought it online and there is no brand name on the adaptor. All it says is 3 in 1 USB Adaptor, RoHS, Made in China. I dont even have the original package for this adaptor. So, cant tell if its HTC or not.
Does the original adaptor says 'HTC' on it?
I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
deboopi2 said:
I've been searching for a while to solve this.
I'd like to connect my HTC one to my car usb connector.
I've seen several repoirts claiming usb audio works, connecting dac's etcetra.
I know I can connect usb drives with a micro-usb to usb connector, tried it and this works.
But I have also seen people saying you need an USB OTG cable for this, so what is it?
I've already connected my One via the micros-usb to usb cable to my car but I do net get audio via the usb on my car equipment.
So again the question, is audio out available on the htc one (and on other android phones) with the stock rom.
Some of the report where talking about CM roms, I do use the elegancia one but I have no intent of switching to CM.
Click to expand...
Click to collapse
since the HTC One does not automaticly plug as mass storage i guess that the car radio simply does not recognize the phone as a mass storage with music.. an USB OTG cable would "fix" it since it will force the phone to be shown as mass storage.. (its a guessing anyway)
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
jmitr said:
And you have guessed correctly. The USB otg cable works fine.....except it added ringtones et al when you select root folder. Worked ok if I navigated to the music folder (assuming your vehicle has that option).
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
deboopi2 said:
Well, for me it does not work.
As I said before I can attach a USB drive to my phone and I can accomplish this by using a micro-usb to usb adapter.
When attaching the drive my phone complains it cannot charge and that I need the standard charger.
But when using a file explorer I can see (read and write) the contents of my usb drive in the storage/usb folder.
I thought this was enough to decide that the converter was OTG but now I'm not so certain about this anymore.
Is every usb to micro usb an OTG or what are the extra requirements?
Anyway I tried again to connect to my car audio and the message I got on the car was
that he could not charge the phone but the phone was as well not recognized as media input.
Because OTG adapters are very cheap I ordered one which explicitly says it is OTG,
I'll see what happens when I can try that one out but in the meantime all comments are welcome.
Click to expand...
Click to collapse
Yes, the cable I had explicitly said "OTG".
I only experimented with this for fun, my Elantra also supports built in bluetooth (phone controls are on the steering wheel, mic in the roof) so I mainly put my One in my car kit, launch car mode and away I go.
The OTG cable worked well for me when I tried it though. It did NOT work with my Son's Nexus 4 so these things can be finicky.
I'm considering to add a powered hub to my Hui because i want to connect a usb flash drive, a dab dongle, a hard disk and maybe a wifi dongle and i want to charge my cellphone.
Right now i have an unpowered USB hub connected to my usb storage port 1. When i connect 2 usb sticks to the hub only one is detected in android, when i also connect my dab dongle, my dongle works. When i remove the USB sitck which is not working and i plug it in my USB 2 storage its also not found ( in root explorer a white icon appears before the name "usb_storage2").
Can some one explain me why the USB storage devices are not mounted / found in android? Is it even possible to add more than 2 storage devices or USB devices to our Hui? Or do i have to mount a third USB storage device manually?? Or is it because o the less of power??
I don't think android currently supports more then one USB data device. I know there are workarounds but I have not tried any. Most of these devices come with at least one sd slot so I think most (myself included) just live with the one usb limit.
Hello, i've bought a galaxy note 5 a week ago. N920C, international version, Marshmallow 6.0.1, not rooted. I was able to get a 32gb variant only, i though that's not a problem, i will increase my storage via USB OTG with Micro SD card reader or USB Flash stick! Today i received all the parts, i've spent whole day trying to find out why it doesn't work, i've downloaded many apps to check OTG compatibility and driver condition. My device recognises the connection when i put in USB OTG cable only - when the screen is off, i connect OTG, screen lights up. Also throubleshooting apps say the same, the device knows when OTG is connected.
The occuring problem : when my phone is connected with OTG cable, i also connect my USB Flash stick / SD card reader / mouse / keyboard / another usb flash stick --> Nothing appears on the screen, file managers show nothing and the troubleshooter stops at recognised OTG cable. Other connection tests won't pass any further. Troubleshooter conclusion - "System NOT Detect USB OTG Signal"; (App name: USB OTG Checker).
After buying a decent high-end device i expect it to have availability to expand storage space via USB OTG, although it was written in phone's specification list. 90% of note 5 devices on the internet say it is working perfectly and i would like to get mine going too :|
Dear all
I have interesting issue. I was using OTG flawlessly (mount usb memory with micro USB plug, or also regular rush with OTG adapter).
Suddenly that stopped working.
I didn't get any update or change any system settings.
Just I was trying to connect my phone to my car via android auto. I was succeeded and for my second trial I couldn't connect to car.
Then I ve realaized otg also not working. I'm not sure this 2 issue is relevant but it seems so.
When I plug USB to phone, I can see "usb connector connected" on status bar and few seconds later it dissappear and does not mount usb disk.
Do you have any idea what is the reason and how can I fix it?
I'm using stock room (without root) 6.0.1
Thabks for any help in advance.