Hi, I'm new here, and I'm not even entirely sure if this is the right place to ask, but I'm on Arrow OS Pie ROM and there's this game(Sword Art Online: Integral Factor) that crashes immediately after opening on the loading screen...and there's not even a crash dialog. I did some digging and saved the logcat of the entire process and couldn't reach a conclusion... I also tried on Nitrogen OS Oreo ROM. Can anyone please tell me what's making the app crash and if it can be fixed?
Package name: com.bandainamcoent.saoifww
Logcat download link: bit.do/logthecat
Thanks in advance!
Related
"the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.
press volume up to reset your device or press any other botton to cancel
this operation will delte all your personal data......"
the above messege is my subjected problem. whenever I do fresh hardreset and after that install any new software and do reset this messege come to my face....
any there anything to correct it........
Actually it was perfect once a months ago but then I suddenly tried to change sim of my mrs. It started to giving me problems... 1st it was not taking any sim even my already working sim, then I repaired it from market now
1) very less battery timing
2) and take too much time to boot
3) every new app installation gives subjected error.
4) not Rom flashing, stuck at 0% (this problem is older than subjected)
5) Network Signal fluctuation
6) After closing call, it hangs up a little bit....
so much problems I have, Please any solution would be appreciated....and thankful to bear my long magazine size issue....
SDKcert - software developers kit certificate(s)
It's the first application I install;
SDKcerts.cab
If you want to remove it..
RemoveSDKcerts.cab
You will need this to run certain applications and carrier settings (most notably Orange cq T-Mobil).
Do you know what an SDK is? its a developers pack. Do you know what a signed program is? Commercial programs are usually signed. certifying their integrity. Most freeware isnt. Problem is the phone is picky about allowing unsigned apps, or programs modification of signed apps. SDKcert is a developers certificate so the phone accepts unsigned apps and allows modification due to development status. Many programs you use NEED sdkcert installed for them to be allowed to run.
Hope this helps,
Senax
Very sorry to say, the problem is still there even installed your suggested-SDKcerts.cab after hard reset but still receiving same problem.
Actually I repaired my mobile and after coming from repairer shop its giving me following problems:
1-mobile booting speed very slow (sleeps on Touch DIAMOND2 screen about 3,4 minutes)
2-after coming to home screen gives many times the error (We're Sorry..."A problem has occurred with device.exe")
3- after installing any new software (those installed and worked without giving any error before repairing) gives the subjected error..
Thanks for your reply and hoping to get more help from you and other peers
Then lets move to file information!
Helle again,
Via PEinfo (Portable Executable) one can obtain information;
Features:
- Information about PE files (executable file and dll in Windows and WindowsCE)
- Shows from what dll depends executable file
- Auto detect some other files *cough*
- Hexviewer
- Image / extraction of resources (icons, images, sounds, dialogs, etc.)
- Determine the processor type and operating system for the assembled file - The program analyzes the resources and applications for Pocket PC
- Information about required to run the modules (DLL) and check their availability -=[can help find the cause of a system message "Can not find file or one of its components," attempting to start the file]=-
- Automatic determination of more than 350 file types, other than PE
Dependency Walker (Win32) is a freeware program, with which you can view several file extentions their dependencies.
Use it when your device is cradled
Success and let me know if these linx helped for you..
Senax
Sir, Senax! what is this? I really don't understand it, I need my system to start without giving this error how can I rid off from this, Can you please tell me how is it possible. Can you please tell me in a simple way if you are experience of this software that how this software can help me to solve my problem
Hello to whoever reads this thread, I hope you can help me.
I'm looking for help since I've been stuck with this issue for a week now and don't know what to do about it.
It all started a few days after finally getting a 16GB SDCard for my Note.
This sounds weird but I can't install all apps. I can install Facebook, Bacon Reader without problem, but apps like XDA or games won't install at all. The play store will just keep saying "Couldn't install on USB storage or SD card"
I tried so many things that I don't have a clue if what I'm doing is actually useful.
Here is a few things I did to get rid of that problem :
- Wiping cache/dalvik, rebooting...many times.
- Flashing PA 4.0 Alpha again and again
- Looking for the "smdl2tmp1.asec" file in .android_secure and remove it (There's no file at all in that folder for me and I have no idea how people manage to see it since I can't really explore the root folder from Windows Explorer)
So, at this point I'm just tired of trying quick fixes and I motivate myself to do the following:
- Trying to go back to PA 3.99 RC2, but CWM is just going mad at me saying the zip file is not made for my device (status 7 error...)
- Updating CWM and trying to flash PA 3.99 RC2 after the first install failed. Fail again.
- Edit the update-script file from Windows to delete the specific "device" lines as stated on this thread. Fail again ? Fail again.
Some background info as I just thought about something that might be causing the issue.
See, Play Music for an incredibly stupid reason doesn't allow you to save music to an external sd card so I've been googling a lot and came upon that blog post giving a few tips on how to solve that issue. Maybe I f'ed up something in the process since I find that manoeuver a bit confusing.
More background info : I've been using PA since 3.69 and never have had any issue with it until that Alpha version but since nobody is reporting errors in the PA support thread it must be a problem on my side.
Oh, and while I'm at it, the loading battery animation when the phone is turned off looks really odd, like it's android from a decade ago and not the fancy one i put as the thread icon.
Any help is appreciated.
Thanks in advance for I really don't know what to do anymore. :crying:
Also sorry for bad english.
FINAL EDIT : Oops. Found the answer by myself, thanks anyway
This bug is supposed to be fixed in the current/next nightly of omnirom.
Thanks for the answer.
So...there's no way to just fix the "Couldn't install on USB storage or SD card" bug ? I don't really want to be forced to change for Omni...
Hi,
( I am no native english speaker and therefore my searches do not find the appropiate things.)
My tablet is a ASUS ME176CX with Lollipop 5.0 (OS version: something...24....something).
The device is rooted, XPosed is installed.
I played around with the following xposed modules (all installed):
Prevent running, Lithning wall, Receiver stop, Per App hacking, Bootmanager
Furthermore I played around with Apps Opps [root].
I had a lot of settings done in those, which works all nice and fine.
Today I changed some more setting (and obviously cant remember exactly what I changed)
and now each download I try ends in a notification saying "Unsuccessful download".
The downloading application (Browser/Xposed Installer) does not display an error message
and browsing the web is still possible.
I disabled all Xposed modules and rebooted -- but that does not fix the problem or change
anything which is download related.
So my problem has something to do with Apps Ops [root]. But this cannot be simply switched of.
I need the information applications/services/demons (or whatever) are used to download something.
Then I need to examine the settings of those in the Apps Ops [root] and may be I can fix that.
Any help is very appreciated -- where can I look for it?
Cheers,
noriatell
Remix Minis (1GB and 2GB) have just received OTA update 2.0.611.
This update has resolved the following reported issues:
1. Fixed issue where Amazon Video sometimes crashes when started.
2. Fixed issue where Clash of Clans sometimes can’t start.
3. Fixed issue where Clash Royale sometimes can’t start.
4. Fixed issue where open Slither.io sometimes loses click responsiveness.
Remember, our Help Center can help resolve most of your common issues:
http://support.jide.com/hc/en-us
Please also keep giving us feedback here:
http://support.jide.com/hc/en-us/requests/new
Latest OTA Update
Hi, can anyone tell me if they have updated to this latest OTA update? I live in the UK and have tried to update my box a number of times, automatically and manually with no success. Just trying to find out if it is only me unable to update.
Thanks
fred05 said:
Hi, can anyone tell me if they have updated to this latest OTA update? I live in the UK and have tried to update my box a number of times, automatically and manually with no success. Just trying to find out if it is only me unable to update.
Thanks
Click to expand...
Click to collapse
I updated yesterday. Seemed to take a long time, but updated successfully. I don't play games or the apps listed so the fixes didn't seem important but I run all updates.
Sent from my Nexus 7 using XDA-Developers mobile app
I have remix mini with sticker RM1G but it is actually RM1C inside current version is .512 and it reports as newest. please send a link to me for newer ROM to [email protected]. I want to use keymappping function.
Can you allso add a setting in user permissions for pad tv app that manages digital tv reveiver dongle connected to usb to have more priority on cpu and do not sleep cpu if pad tv is running because after 30 mins it starts to lag untill I make some action to it and it feels kind a cpu went from sleep to work and again no lag.
In last update (2.0.611) files and folders in ext SD card are seen ad doubled by apps. No problemi eith previous version (2.0.604)
PLEASE HELP
I have downloaded the latest update (Remix OS 2.0.611) the usual way using update feature in the settings.
After the download processes completed, I click the button to implement the update, as usual. But after that my Remix Mini never reboot back. With previous updates, it will always reboot and then start performing the update process.
please send 4 help here
In rmx os vrs 2.0.611, apps like Quickpic or music players show same files twice for files stored in external SD card.
Also when I delete a file stored in external SD card, the trash show me the same file twice.
I tried to restore my Remix Mini, but this issue persists. No problem with previous version (2.0.604). I have Remix mini 2Gb ram
i've always desktop crash with black screen.. only pressing Start i can see icon desktop
wiking76 said:
i've always desktop crash with black screen.. only pressing Start i can see icon desktop
Click to expand...
Click to collapse
My Remix Mini just went through an update and the wallpaper disappeared and the icons all disappeared.
Sent from my Nexus 7 using XDA-Developers mobile app
---------- Post added at 05:59 PM ---------- Previous post was at 05:31 PM ----------
Just rebooted and the Wallpaper and app icons returned as normal. Try rebooting.
Sent from my Nexus 7 using XDA-Developers mobile app
The days after again
AmoraRei said:
please send 4 help here
Click to expand...
Click to collapse
Thanks everything was fine after giving it a force shutdown and reboot.
I have upgraded from Android Studio 1.0 to 3.3.
I was building and rebuilding and flashing my software to phone very effectively on 1.0 and now after upgrade after nearly two days of work I can still not get the basics (build Android app as far as java compile errors) working.
I appologise if my questions are not perfectly formed, I am beginning to get really tired and confused and I would be so grateful of a little latitude and some help to get back to where I was.
When I installed 3.3 it recommended that it uninstall the current version, which I agreed to it doing. So fresh start I guess.
Amongst other things...
After the install, my app would not build and kept asking for a newer version of gradle. I set in settings local gradle 4.10.1 and I set the gradle plug-in to 3.3.0 in the top level gradle file. I tried setting "use default gradle wrapper" and then setting these versions in "project structure" but they kept changing back again, so I used the other method just described. It then complained it couldn't find that plugin so I added repositories google and jcentre to that file. It then began to build but complained that a version of build tools could not be installed because the license had not been accepted. I clicked on the link provided and accepted the license, but the build tools would not install, no reason.
I could not find "sdk manager" menu item anywhere in AS menu structure. Don't know why. It used to be there in 1.0.
Thinking it's a brand new install as it said I go to OS start->all programs->Android sdk tools and launch sdk manager as administrator. I install the offending build tools version accepting the license.
I rebuild, same error.
I look where that sdk manager exe was and there is no license folder in that folder nor the one above.
I root around the folder structure and find a different sdk manager under prog files (x86)\Android\android-studio\sdk and a license folder in the folder above. I run that sdk manager and install the offending build tools version accepting the license.
I go back to Android studio and click rebuild project, nothing I mean literally nothing happens, clean, nothing, make, nothing! Nothing at all! I close AS and restart it (as administrator), exact same issue. This new issue really gives me very little to work with as there is no feed back at all. I'm beginning to regret upgrading AS as it is holding me back from coding now.
I have two questions:
1) Can anyone see a possible way out of my immediate problem and how to get my project at least attempting to build again and get at least as far as just compile errors.
2) Am I right in thinking that current version of AS is far from an out of the box experience even for the common default activities (build Android java project) and has a variety of unexpected anomolies OR a lot of settings whose defaults may very likely not be useful and need manually resetting? IF SO... Is it therefore recommended I do a couple of days reading maybe about the structure of "specifically" AS and it's dependant components and how to set them up and use them effectively? IF SO... what documents would one recommend, so as to make the most efficient use of time.
Apologies if this is not well formed. Hoping for some help.
Thanks.
@hardya
I have AS installed on linux so I can't help you much with windows. I can tell you that AS 3.3 works great and is much better than 1.0. Mind you, I've been using AS since it was in beta.
Try to create a new project. If the new project is created and builds without error, then you know AS is working correctly.
If the above doesn't work then I recommend you do a full uninstall of AS and then do a fresh install as follows.
Follow this AS uninstall guide:
https://stackoverflow.com/a/39953746
Then follow this guide to install AS:
https://developer.android.com/studio/install
Then try a new project as mentioned above. If the new project goes well, then you can proceed to import the project you was working on originally.
Thank you. I think there are possibly issues with this upgrade path. It was supposed to have uninstalled completely (said it was doing so) and installed 3.3 afresh. However when you open "AS" itself it opens with the existing project in place. It is not until you close that project that it suddenly closes AS, reopens AS and enters the first startup wizard to complete the remainder of the installation / configuration.
I think I am a step further on since then.
Thanks