Hi, i have try to edit my thermal-engine-normal.conf and thermal-engine-sgame.conf for gaming experience, i change the set_point from 40000 to 46000 but it's can't change anything. When i playing game and temp going up to 41°c it laggy.
Please help to edit thermal-engine mi 6x
/vendor/bin/thermal-engine
rename that file to thermal-engine.bak
it will solve your problem but i dont recomended it unless you do hardcore gaming like me xD
Related
hi, i just changed my galaxy s2 for this lg p990 because i needed some money. i love this phone but current software lacks of full hardware control. for instance on sgs 2 tegrak apps and kernels provide a full customization in frequency and voltages (cpu and gpu). if you can find a lucky phone like mine was you can undervolt gpu from 1,1 to 0,75 volt at full frequency with a great battery life improvement. i love small but powerful apps like
-voodoo control
-tegrak apps
-chainfire 3d
and i paid for all of them! so i will buy also a nice app to control gpu and avp of my tegra 2 lg p990! i don t care about need of reboot or aomething, i will just watch my full hp movies on hdmi without lag or frame skip!
Hello!
What you want is available - to a certain extent.
To UV you need a OC/UV kernel to do this and you could use either one of kernels like i.e. spica(Horse Power kernel for stock rom), dr4go(fps kernel for stock), SetiroN(ironknL for CM7) or vodonka (KANG kernel for CM7).
Then use i.e. Pimp my CPU to customise under-volt over-clock...whatever...
But if it is possible to undervolt GPU independently in Tegra 2 chips - I don't know. You could ask any of the kernel devs above!?!?
Chainfire 3D is available - if you bought it just install it - it gives some performance but MSAA customisation isn't supported by the Tegra 2 - if you are looking for this...
Voodoo sound control is available and still under development - right know their are only some basic features - but it works and brings some dynamic range improvement. IMHO it is a noticeable improvement.
BTW: Watching video with full HD up to 1080p is possible out of the box - no need to OC or to OC GPU for that.
hi, thank you for your answer! i flashed cm7 and now i don't cry anymore for my ex sgs2, but a friend of mine gave me an hd file for test and it was 1080p with low bit rate ( 2,5gb for 2 hour lenght) but impossible to watch properly on my hd tv. and i was very disappointed when the encoding speed was almost the same switching beetween hw and sw decode ( on mx player). i don t think tegra 2 sucks as it seems. i manage clock speeds on my mobile with pimpmycpu but it is not very reliable and still don t have any control on gpu and avp clock. so what i think that really lacks on p990 sw
environment is a gpu/avp control. i home cm9 will bring any improvement on this side
isd88 said:
hi, thank you for your answer! i flashed cm7 and now i don't cry anymore for my ex sgs2, but a friend of mine gave me an hd file for test and it was 1080p with low bit rate ( 2,5gb for 2 hour lenght) but impossible to watch properly on my hd tv. and i was very disappointed when the encoding speed was almost the same switching beetween hw and sw decode ( on mx player). i don t think tegra 2 sucks as it seems. i manage clock speeds on my mobile with pimpmycpu but it is not very reliable and still don t have any control on gpu and avp clock. so what i think that really lacks on p990 sw
environment is a gpu/avp control. i home cm9 will bring any improvement on this side
Click to expand...
Click to collapse
The last thing i heard was that CM7 and HMDI 1080p and 720p playback didn't work 100%. on stock, that should work..
yes, it played well on stock gingerbread....not like sgs2 but something lile. dual boot on lg dual (italian name of lg 2x) could be a good idea also
Hello!
The Question is if the used codec that was used for encoding the video is supported by the hardware.
BTW: I use moboplayer, but my TV only supports 720p with this phone (don't know why - while it supports 1080p with my laptop) and I used 720p sources from OnlineTVRecorder.com for testing - this works without glitches...
Guys my Nook Color does not play videos flawlessly. I find no audio - video proper sync. Sometimes it slows down. How to solve this issue ?
Currently I am using Mirage 7.2 [03042012 build]
I have no idea how to overclock, so I assume I am using at stock speed. Does overclocking help this issue ?
Does my nook HWA enabled ? How to check ?
Which is best media player ? something like VLC / GOM as for PC ?
Here are the two videos I'd like my Nook Color play flawlessly :
Video 1 : http://npteldownloads.iitm.ac.in/softlinks_mp4/106102064/lec06.mp4 [source]
Video 2 : https://d19vezwu8eufl6.cloudfront.net/algo1/recoded_videos/[420f432a] about.mp4 [source]
This are free educational videos & I am not pirating.
I just ran the 11mb file you posted and it ran flawlessly. I suggest you use Mobo player for playing video files. My NC is overclocked, set on conservative from 800mhz to 1200mhz. I suggest you check out the post from mr72 in General Discussion about his setup, you don't have to do the first steps about repartitioning. Just do the last few steps about battery and performance improvements. Right now im posting from my nook so its a bit cumbersome to get the links for you. Once I get on my laptop ill edit the post.
Sent from my NookColor using Tapatalk
Edit: Ok go into mr72's guide and follow the steps from 17 - 19, this should help with your performance.
Thank you very much, I will look into it
Is overclocked needed OR it can play at 800 Mhz ?
avi! said:
Thank you very much, I will look into it
Is overclocked needed OR it can play at 800 Mhz ?
Click to expand...
Click to collapse
I would definitely overclock. It is very safe and easy and gives a significant performance boost in all areas. 1200MHz seems fine for every Nook C, some push it to 1300MHz but that can actually start to slow some graphics performance measures down. You won't significantly hit battery performance as the Governor slows the clock speed down when its not needed.
Just get one of the apps from the market like antutu CPU Master pro and set it up.
Just an app from Market can OC it ? no other flashing any zip file / kernel etc needed ?
avi! said:
Just an app from Market can OC it ? no other flashing any zip file / kernel etc needed ?
Click to expand...
Click to collapse
If you are using Mirage it already comes with overclocked kernel capabilities, just follow the instructions in mr72's guide (the link I gave you earlier).
Or just go into Settings>CyanogenMod Settings>Performance>CPU Settings:
Min CPU: 300mhz
Max CPU: 1200mhz
and voila!
But I highly recommend that you take a look into mr72's guide for undervolting these specific steppings, so you get better battery life.
on a side note, anyone able to play 720p videos?
Hello. Anyone tried real racing 3? I was expecting a lot more from a quad core + gpu 1.5x speed the Mali. Although installed it shows 'device not supported' in Google play. Maybe it has to do something with this? Any workarounds?
i also use this phone, it can play this game, if we use all core (4 core), the game run so lag but full graphic, if we only use 1 core, game run smooth but low graphic
warcraft8 said:
i also use this phone, it can play this game, if we use all core (4 core), the game run so lag but full graphic, if we only use 1 core, game run smooth but low graphic
Click to expand...
Click to collapse
What about 2-cores? What software are you using to change the core usage?
As always in better games - set governor to performance . Plays quite good
governor=??
Can someone please elaborate?
oh, you need app like SetCpu to do this.
scooterlord said:
governor=??
Can someone please elaborate?
Click to expand...
Click to collapse
governer.. the way ur cpu behaves under load and idle times..
Oppa Gangnam Bootlooder Unlock Style
Hello, I have got Lenovo K3 Note, everythings working good, But have only one big problem with games. Wien I start playing game on first minutes game working Good and smooth, but after some minutes fps going down and game is lagging a bit. Its on many games like Dead trigger 2, modern combat 5. Example on Dead trigger 2 When start is 30-40 fps, after some minutes of playing fps down to 15-30 and game is not playable. Anyone have This Phone and checked some games on it?
dompas said:
Hello, I have got Lenovo K3 Note, everythings working good, But have only one big problem with games. Wien I start playing game on first minutes game working Good and smooth, but after some minutes fps going down and game is lagging a bit. Its on many games like Dead trigger 2, modern combat 5. Example on Dead trigger 2 When start is 30-40 fps, after some minutes of playing fps down to 15-30 and game is not playable. Anyone have This Phone and checked some games on it?
Click to expand...
Click to collapse
Sorry I am not giviny you a help, but I am asking you for a help.
I have flash mine with a recovery and it can not boot any more now, can you please give me a backup from yours, so that I can flash it with SPFlashTool ?
Sorry I am not giviny you a help, but I am asking you for a help.
I have flash mine with a recovery and it can not boot any more now, can you please give me a backup from yours, so that I can flash it with SPFlashTool ?
Click to expand...
Click to collapse
Solved: in SPFlashTool we must check the option "DA DL all checksums" to flash correctly this phone, otherwise it will not boot!
A possible reason
dompas said:
Hello, I have got Lenovo K3 Note, everythings working good, But have only one big problem with games. Wien I start playing game on first minutes game working Good and smooth, but after some minutes fps going down and game is lagging a bit. Its on many games like Dead trigger 2, modern combat 5. Example on Dead trigger 2 When start is 30-40 fps, after some minutes of playing fps down to 15-30 and game is not playable. Anyone have This Phone and checked some games on it?
Click to expand...
Click to collapse
The heat sensor in the phone is optimized with UI. When it starts heating a lot, it will definitely start dropping the FPS. What I do in my case, is to put the phone in flight mode, clear out all running app, restart the phone, get myself as close possible to the AC and then launch heavy games. We seriously need CM11 in this to get the best result out of it.
Somebody on another thread says that games play very well on the vibe 2.5 1529 rom.
As regards heating, afaik all phones heat and downclock when playing taxing games. Maybe the downclock is too aggressive on most roms on this phone.
Use Stable versiln of ui vibe. Its the best rom so far for games (no fps dropping that much, not that hot as others)
Fix game lag on k3 note
So you can try this app: " Ram manager pro"
Open app, in "option",you chose " hard multitasking" ,then chose "Custom" and config :
Foreground apps : 0 MB
Visible apps: 0 MB
Secondery server: 0 MB
Hidden apps : 0 MB
Content provider: 0 MB
Empty apps: 0 MB
swappiness : 100
Then choose "confirm" and check in "setb on boot".
you can try with " Real Racing 3",,good luck
Mediatek Clearmotion technology Missing in K3 Note! How to enable?
Hi All,
I couldn't fin the Mediatek Clear Motion technology in the settings page of Lenovo K3 Note. Can anyone say, how to enable this?
I am sure the chipset MT6752 supports Mediatek Clear Motion technology.
Please help.
Thanks&Regards
Satheesh
k3 note said:
So you can try this app: " Ram manager pro"
Open app, in "option",you chose " hard multitasking" ,then chose "Custom" and config :
Foreground apps : 0 MB
Visible apps: 0 MB
Secondery server: 0 MB
Hidden apps : 0 MB
Content provider: 0 MB
Empty apps: 0 MB
swappiness : 100
Then choose "confirm" and check in "setb on boot".
you can try with " Real Racing 3",,good luck
Click to expand...
Click to collapse
Useless solution
cant play fifa for more than 2 minutes, before it starts going slllooooowww moooootion lol
Hi,
I noticed that Dota Underlords on Android Oreo has horrendous fps, like max 15 fps, and it can easily reach 5... I tried it an Pie and it ran fine, but Pie is missing some things that make me prefer Oreo.
I never found any game that runs that bad, even on minimum graphics, and I was wondering if I'm missing a setting or if other apps are interfering, like the game launcher.
Can anyone give me any idea to be able to play the game decently on Oreo?
Maybe Oreo is missing a GPU driver update that is making affecting your game