I have a Leeco Le2 X520 which was flashed with AOSPExtended v5.8. Then I flashed couple of times of 19s bootloader and modem trying to fix the GPS issue. Then last night I picked up the system update, only found out that it was not stable and always freezes and restarts itself. Further looking reveals that the device name now is le_x2 instead of le_s2. I then tried to clean flash pixelexperience pie ROM. It flashed (with change made to update-script) but stuck in the boot interface. At this moment I do not know what to do. Is there a way to change the device name back to le_s2? Thanks for your help!
jensenchen68 said:
I have a Leeco Le2 X520 which was flashed with AOSPExtended v5.8. Then I flashed couple of times of 19s bootloader and modem trying to fix the GPS issue. Then last night I picked up the system update, only found out that it was not stable and always freezes and restarts itself. Further looking reveals that the device name now is le_x2 instead of le_s2. I then tried to clean flash pixelexperience pie ROM. It flashed (with change made to update-script) but stuck in the boot interface. At this moment I do not know what to do. Is there a way to change the device name back to le_s2? Thanks for your help!
Click to expand...
Click to collapse
Check your bootloader, perhaps you flashed of x2 (le max 2). Use chinese recovery and flash stock eui 6, boot and check about phone, then flash your favourite rom again.
Will do, thanks for your help!
MP_Singh said:
Check your bootloader, perhaps you flashed of x2 (le max 2). Use chinese recovery and flash stock eui 6, boot and check about phone, then flash your favourite rom again.
Click to expand...
Click to collapse
Related
Hello guys, I really need your help!
I've just spent 5 hours trying to fix my Xiaomi Mi 8 bootloop.
Everything began this morning when I started a common update. After the reboot I got just an infinite bootloop on the white word "MI" that i get every time I turn the phone on.
I bought the phone from China with a Global rom already installed and the bootloader unlocked. I can access fastboot.
Here what I did today, until now:
-I decided to install a TWRP, only the 3.2.3.0 worked after many attemps with other versions.
-From twrp I flashed the last xiaomi eu stable. Result? Bootloop was still there.
-I flashed the last xiaomi eu weekly. Result? Bootloop there.
-I decided to go through Mi Flash.
-I installed the tool and downloaded the last Global Stable for fastboot installation.
-I flashed the global from Mi Flash. Result? Bootloop is here.
I don't really know what to do. Every time i did factory reset from twrp. I tried also to make the factory reset from fastboot command. I tried everything I could find online. No solution, same infinite bootloop.
Any suggestion? Thank you very much
Simone
Did your find a solution? I have the same problem.
Odoslané z MI 8 pomocou Tapatalku
Hi, after many attemps I installed the xiaomi.eu!
I could install china stable from mi flash, but I was not satisfied with a lot of Chinese apps. After that I installed again the twrp and I could put the ROM pixel experience. After pixel experience if I am not wrong I tried another twrp (I need to check) with which I could install the Xiaomi EU!!! Now I don't want to update anymore
If you need help I can check the version of the last twrp I have used! I guess it was an anti backroll protection because I could install the last china dev but nothing else, neither from that twrp.
If you need help ask,
Bye bye
is it because of encryption issue? from the first day i use mi8, i always on decrypt.
my step to flash any rom is:
1. flash rom
2. magisk
3. flash dm-verity
never had bootloop issue
flashing dm-verity should fix it.
simoooo17 said:
If you need help I can check the version of the last twrp I have used! I guess it was an anti backroll protection because I could install the last china dev but nothing else, neither from that twrp.
Click to expand...
Click to collapse
Hi I have/had the same problem!
- The only rom I got working was the "xiaomi.eu_multi_MI8_V10.0.11.0.OEACNFH_v10-8.1." which I stil use.
- I also can get the the official "dipper_global_images_V10.0.2.0.OEAMIFH_20180912.0000.00_8.1_global" rom working but it stil keeps updating to the latest version after a while. If that happends I get the bootloop problem.
So I'm stuck at an android 8.1 .EU rom and I'm scared to update to the latest stable android 9.0 rom because of the bootloops and/or to brick it and to lose al my data again.
So my questions:
1 - do you use the latest stable ROM, (which one) at the moment?
2- how did you install it?
3 - which TWRP did you use to flash the .EU rom?
4 - I use an 8.1 .EU rom. Do you think I can update without losing al data again (my wife will kill me if I have to reinstall again)?
5- Any idea why we have this problem?
I really like to update to android 9.0
I just saw (!) that they released an official version of TWRP for the Mi 8 at https://twrp.me/xiaomi/xiaomimi8.html
Thanks in advance!
Hello, I have solved using a different TWRP with which I could install the xiaomi.eu weekly! I tried a lot of twrp until that one worked
Where can I find this twrp version? Anders on which exact version are you on?
My Mi 8 got bricked by the latest MIUI update. I installed the software update from settings and clicked reboot and it booted straight to TWRP (more on that in a bit). I tried rebooting to system but it just went straight back to TWRP. I have unlocked the bootloader and also rooted my phone but as I kept the stock ROM I wouldn't think this would break it. In hindsight, after doing a bit of looking around it seems like people tend to reflash stock.img before updating or something when they've rooted their phone? Wish I'd known that before I clicked update.
I tried flashing a different ROM but when I go to reboot it just says "no OS installed. Are you sure you want to reboot?" and just goes into bootloop stuck on the Mi logo
using fastboot adb tools I can boot it into TWRP (has never worked using the volume and power buttons) and flashing ROMs seems to go okay but reboot says no OS installed and it bootloops, as I said.
I've tried flashing the latest MIUI build for my device, pixel experience, lineage OS and all of them yield the same results. Happy to answer any questions and try out any suggestions that anyone has. I'm really quite desperate!
SOLUTION: I flashed the stock firmware using the xiaomi mi flash tool. This fixed pretty much everything apart from now the camera doesn't work lol
What twrp you are using?
dimitrisverlis said:
what twrp you are using?
Click to expand...
Click to collapse
twrp-3.2.1-0611
Wipe everything, FORMAT data and update xiaomi firmware.
Hi guys, I'm new here. I haven't been playing with custom roms for a while now but I have xiaomi mi 8 se for which I would like to set up a custom global/eu rom. I read a lot of posts here and tried to do it but without access. First I applied to unlock my device via Xiaomi procedure, waited X hours and then went to download and install rom from here: https://mifirm.net/model/sirius.ttt#global
That's when I realized that I have to find fastboot rom for this way of flashing and there isn't one for global or eu version. After a bit more reasearch I decided to do it on my own with TWRP (just found out how that works). So I downloaded one from here: https://mifirm.net/model/sirius.ttt#twrp and after some time (and a lot of small steps I learned along the way) I got it installed.
Then I downloaded non fastboot EU rom and tried to flash it through recovery(twrp). Problem here is that the whole recovery is in chinese so I had to watch other people videos and compare location of buttons so I'm not sure I pressed everything correct. After "flashing" phone stuck in fastboot boot loop. Here I panicked I bricked the phone and downloaded "normal" chinese rom with fastboot and flashed that MIU flash tool. This went well so now I have factory reset phone with the same/similar rom I had before. I know this is an old device and probably there isn't some easy solution but I would love to hear if someone with more experience can give me some advice how to correctly flash eu rom (non fastboot). Also is there some version of twrp that isn't chinese and it would be perfect if I can flash twrp with fastboot (if thats possible).
For recovery: Link
Recommend to factory reset from TWRP before flashing any ROM. And speaking of custom ROM, can I recommend to you the Pixel Experience? It's the most solid ROM right now. If you are interested, you can try out.
Hello NesaiOmachi, thank you very much for your advice. Pixel experience looks great, my only prerequisite is that it has google play services support so will definitely check it out. I found this page with ROM downloads, can you please also point me which version to choose and which twrp (from your url) is compatible with it?
I assume I have to install twrp with ADB tools from my PC (already have that setup up), then I enter TWRP and do something like this: https://nerdschalk.com/how-to-install-a-custom-rom-using-twrp-recovery/
EDIT: just saw there are instructions at pixel experience site, awesome! Ignore my message, will try with latest twrp and latest pixel rom and see how it goes
When I try to install a ROM, no problem installing TWRP and flashing a ROM.
But when I restart, whatever the ROM it systematically restarts on TWRP.
Everything is back to normal when I reinstall the MiUi ROM.
I installed vbmeta, TWRP is kept even with the MiUi ROM.
I tried to install a ROM on MiUi but nothing happened, TWRP is launched systematically after restarting.
I tried with several versions of TWRP but nothing worked.
Also with LOLz kernel with and without; and Magisk too.
Sleep on it !
you have to format DATA and not Wipe !
Hello guys! I'm new here and don't know where to get help. My phone (Xiaomi 4g [phoenix]) has a weird bootloop to it.
I installed Miui 13 eu rom via the name of file is "windows_fastboot_first_install_with_data_format" now I get a bootloop that goes back to TWRP.
When i checked the my storage on my pc it only shows TWRP folder only. i don't know what to do. i've been sitting the whole day trying to figure to fix my phone.
I downloaded a Miui 12 and installing it via twrp. now after a few minutes of waiting and still get backs to TWRP.
1999romelx said:
Hello guys! I'm new here and don't know where to get help. My phone (Xiaomi 4g [phoenix]) has a weird bootloop to it.
I installed Miui 13 eu rom via the name of file is "windows_fastboot_first_install_with_data_format" now I get a bootloop that goes back to TWRP.
When i checked the my storage on my pc it only shows TWRP folder only. i don't know what to do. i've been sitting the whole day trying to figure to fix my phone.
I downloaded a Miui 12 and installing it via twrp. now after a few minutes of waiting and still get backs to TWRP.
Click to expand...
Click to collapse
wrong subforum, heres the poco x2 subf
Xiaomi Poco X2
The Xiaomi Poco X2 is a 6.67" phone with a 1080x2400p resolution display. The Qualcomm SDM730 Snapdragon 730G chipset is paired with 6/8GB of RAM and 64/128/256GB of storage. The main camera is 64+8MP and the selfie camera is 20+2MP. The battery has a 4500mAh capacity.
forum.xda-developers.com
sounds like your data got wiped, thats why theres only a twrp folder in internal. you should prolly full flash a fastboot rom since you mightve missed a few important steps
Hi Fonzacus
Please tell me
What is the reason for flashing that vbmeta img?
Is it always necessary when clean flashing latest crdroid custom ROM?
johndaog said:
Hi Fonzacus
Please tell me
What is the reason for flashing that vbmeta img?
Is it always necessary when clean flashing latest crdroid custom ROM?
Click to expand...
Click to collapse
sorry for the super late response
its supposedly for bypassing android verfied boot (avb). it blocks unauthorized roms from booting. if you search for 'what is vbmeta', we literally get no info at all and mainly speculations (no official docs etc). imho it does seem true
Hi
A few months ago I was able to flash on angelica lineage-17.1-20210326-UNOFFICIAL-angelica.zip and this worked well. Yesterday I tried to flash the s same image again and after several attempts I get a black backlit screen when lineage is meant to start. I reflash stock _V12.0.10.0.QCRMIXM then a recovery - PBRP 3.0.1. From there I was having issue
What is the flashing process for an unlocked device that has something like TWRP/Pitch Back/Orange Fox installed?
I guess once you unlock and can flash the recover you use the recover to flash the zip, then reboot and flash magisk.zip and everything should work? Or is there some step missing.
I had this problem too with the google pixel 7 pro. Can't help ya there on that one. I even tried re installing older firmware and it still didn't work. Maybe the bootloader is permanetly downgradable but the firmware of the stock is. Just a guess. Lineage os 20 is an unofficial build at the moment that receives hardly any updates.