Related
Hi all, i found all newest firmwares on: http://hwmt.ru/oth/HWFF/info/view.php?find_model=VTR-L09
Be carefull!
Because now iam stuck with only working fastboot and recovery. For my model (i only know what i own VTR-L09 device, but nothing more about operator, or brand) none of these FW can not be installed through "dload" folder from sdcard and iam bricked my phone trying to install wrong files using Fastboot.
And if somebody know and can tell how can write different brand, or operator firmware to phone i would be very grateful.
o0z0o said:
Hi all, i found all newest firmwares on: http://hwmt.ru/oth/HWFF/info/view.php?find_model=VTR-L09
Be carefull!
Because now iam stuck with only working fastboot and recovery. For my model (i only know what i own VTR-L09 device, but nothing more about operator, or brand) none of these FW can not be installed through "dload" folder from sdcard and iam bricked my phone trying to install wrong files using Fastboot.
And if somebody know and can tell how can write different brand, or operator firmware to phone i would be very grateful.
Click to expand...
Click to collapse
Maybe someone know how to restore P10 to working stage when only works Fastboot and Recovery, but nothing of these methods not working:
1. Restore from eRecovery, because no firmware list for device not found.
2. Restore from HiSuite because at the moment this model does not supported.
3. Dload updates from SD/OTG because of EMUI 5.1 security rules.
o0z0o said:
Maybe someone know how to restore P10 to working stage when only works Fastboot and Recovery, but nothing of these methods not working:
1. Restore from eRecovery, because no firmware list for device not found.
2. Restore from HiSuite because at the moment this model does not supported.
3. Dload updates from SD/OTG because of EMUI 5.1 security rules.
Click to expand...
Click to collapse
Check Dc Phoenix if it supports P10 to unbrick your phone. Where did u buy the phone?
Sent from my HUAWEI LON-L29 using XDA Labs
Thank You, currently DC Phoenix not supported for Huawei P10 and phone most likely received from Poland, or UK I can not exactly answer.
Mostar088 said:
Check Dc Phoenix if it supports P10 to unbrick your phone. Where did u buy the phone?
Sent from my HUAWEI LON-L29 using XDA Labs
Click to expand...
Click to collapse
o0z0o said:
Thank You, currently DC Phoenix not supported for Huawei P10 and phone most likely received from Poland, or UK I can not exactly answer.
Click to expand...
Click to collapse
It should be C432 if it is from EU, but cant be sure.
Sent from my HUAWEI LON-L29 using XDA Labs
Mostar088 said:
It should be C432 if it is from EU, but cant be sure.
Sent from my HUAWEI LON-L29 using XDA Labs
Click to expand...
Click to collapse
I try this FW "VTR-L09C432B113_v78079_f1", but same result "Software install failed!" on 5%.
You may understand firmware code structure? Is Cxxx number show brand/operator, or Bxxx number? Can You explain to me firmware code structure?
For example this firmware "VTR-L09C432B113", has 3 parts in name..
Model: VTR-L09
Part-1: C432
Part-2: B113
...and these parameters...
G:1473
g:104
v:78079
f:1
o0z0o said:
I try this FW "VTR-L09C432B113_v78079_f1", but same result "Software install failed!" on 5%.
You may understand firmware code structure? Is Cxxx number show brand/operator, or Bxxx number? Can You explain to me firmware code structure now I know only a few parts?
For example this firmware "VTR-L09C432B113", has 3 parts in name..
Model: VTR-L09
Part-1: C432
Part-2: B113
...and these parameters...
G:1473
g:104
v:78079
f:1
Click to expand...
Click to collapse
C is Cust that is the region, like C432 is EU, C185 is Middle East Africa, C636 is Asia, then there is some branded custs like Vodafone C02 etc.....
B is Build for the Firmware, higher build is newer Firmware.
Then u can only flash a FULL firmware, u cant flash OTA.
L09 is singel sim.
L29 is dual sim.
VTR is P10 model
EVA is P9
VIE is P9 Plus
Etc.....
Sent from my HUAWEI LON-L29 using XDA Labs
Mostar088 said:
C is Cust that is the region, like C432 is EU, C185 is Middle East Africa, C636 is Asia, then there is some branded custs like Vodafone C02 etc.....
B is Build for the Firmware, higher build is newer Firmware.
Then u can only flash a FULL firmware, u cant flash OTA.
L09 is singel sim.
L29 is dual sim.
VTR is P10 model
EVA is P9
VIE is P9 Plus
Etc.....
Sent from my HUAWEI LON-L29 using XDA Labs
Click to expand...
Click to collapse
Thank You for code explanation.
Mostar088 said:
Then u can only flash a FULL firmware, u cant flash OTA.
Click to expand...
Click to collapse
OTA can be with two different types Full or Update. For full OTA images is it impossible to extract Update.app file to SD card or OTG "dload" folder and install it? Like it done in this post http://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/?
o0z0o said:
Thank You for code explanation.
OTA can be with two different types Full or Update. For full OTA images is it impossible to extract Update.app file to SD card or OTG "dload" folder and install it? Like it done in this post http://rootmygalaxy.net/how-to-manually-install-ota-updates-on-huawei-devices/?
Click to expand...
Click to collapse
No u cant, u can extract it but it will fail on update. U must have a FULL firmware to do it, and it has to be signed by Huawei before u can update. The only solution is a paid solution that i sent to u on PM.
Sent from my HUAWEI LON-L29 using XDA Labs
Hello all!
Just for theming, I'm trying to extract system.img with "ext4_unpacker" but it's not working, ext4_unpacker not responding and crash. I was able to extract P9 system.img without any problem.
I choose VTR-L09C432B113, 2Go update.zip.
Someone could help me? thanks!
edit: solution founded here https://arunavavishaldutta.blogspot.fr/2016/04/android-systemimg-file-extraction.html
I just received a notification that a newer system has been downloaded to my phone, ready to install. The files were stored in /data/update/HwOUC/81703 and has 3 zip files:
Code:
HWVTR:/data/update/HwOUC/81703 # ls -l
total 957872
-rwxrw-rw- 1 u0_a90 u0_a90 482001071 2017-04-21 00:42 update.zip
-rw-r--r-- 1 u0_a90 u0_a90 7216464 2017-04-21 00:45 update_VTR-L09_hw_eu.zip
-rwxrw-rw- 1 u0_a90 u0_a90 715758 2017-04-21 00:42 update_data_public.zip
HWVTR:/data/update/HwOUC/81703 # sha1sum *.zip
da93572f30c7736ca8e1af8a6d5af1f34bb477fe update.zip
e18e2083f6171b1bceae8a8d834d086976e1c252 update_VTR-L09_hw_eu.zip
5e85c51e082c5a199b7f9b849b0c53939b85776e update_data_public.zip
I'll save a copy in case anyone wants them.
https://drive.google.com/file/d/0B40OxpXn415GNlRIZXlVYk9GajA/view
my huawei p10 screenshot is here.but now i llok at this site latest fırmware for my phone
http://hwmt.ru/oth/HWFF/info/view.php?find_model=VTR-L09
latest firmware VTR-L09C432B123
i look at wrong section?my fırmware is latest?
daily check system update but nothing found
Hey,
I have found the full images for European Model on a page (sorry, can't share the link due to forum restrictions just yet. I googled for
Code:
"vtr-l09C432" full
and picked the russian page from the results.)
I am currently downloading VTR-L09C432B123 OTA FULL, because I had somehow lost my camera app, and will try to reflash it using the dload method.
The page downloads the update from the official huawei update mirrors, so I feel much more comfortable with this approach than with the paid options.
Update currently failing as my only micro SD card is formatted FAT32, and the update.app file is 4GB
Jannomag said:
my rebranded L09...
And the best new feature: I can use the Dual SIM feature!
Click to expand...
Click to collapse
Are you saying you had a VTR-L09C432 (I saw that earlier in another post of yours) and flashed some magic, and now have a dual sim phone?
Lukx said:
Are you saying you had a VTR-L09C432 (I saw that earlier in another post of yours) and flashed some magic, and now have a dual sim phone?
Click to expand...
Click to collapse
It can show dual sim feature but he still cant use it without a second imei number. So in Settings it shows u have dual sim but u cant use it.
Sent from my VIE-L29 using XDA Labs
Lukx said:
Are you saying you had a VTR-L09C432 (I saw that earlier in another post of yours) and flashed some magic, and now have a dual sim phone?
Click to expand...
Click to collapse
Mostar088 said:
It can show dual sim feature but he still cant use it without a second imei number. So in Settings it shows u have dual sim but u cant use it.
Click to expand...
Click to collapse
Two quotes, two anwsers:
Yes and no.
I have now enabled dual sim on my VTR-L09C432 - I can make a pic of my package if you don't believe
But I can use it only as Dual Sim Standby. That means, I have both sims active and can make calls with both sims. Internet is working with only one sim which I can choose from settings.
I used it the last 3 days and it worked good. I have my private sim with internet enabled in slot 1 and my sim for work, which is only for calls, in slot 2.
I can make calls using both sims, but when I'm in a call and someone tries to call me on my other sim, the provider tells him, I'm currently not available.
The only thing I can't do is using internet from SIM1 while calling with SIM2.
But this is a thing, I can, personally, live with.
Now I'm interested to know, how the L29 naturally works. Are there two IMEIs?
EDIT:
Screenshot of Dual Sim settings, screenshot of call protocoll, photo of package with phone.
And yes, where I live is nearly no signal - thanks Vodafone! It's a big city in Germany an there's no signal...
Jannomag said:
Two quotes, two anwsers:
Yes and no.
I have now enabled dual sim on my VTR-L09C432 - I can make a pic of my package if you don't believe
But I can use it only as Dual Sim Standby. That means, I have both sims active and can make calls with both sims. Internet is working with only one sim which I can choose from settings.
I used it the last 3 days and it worked good. I have my private sim with internet enabled in slot 1 and my sim for work, which is only for calls, in slot 2.
I can make calls using both sims, but when I'm in a call and someone tries to call me on my other sim, the provider tells him, I'm currently not available.
The only thing I can't do is using internet from SIM1 while calling with SIM2.
But this is a thing, I can, personally, live with.
Now I'm interested to know, how the L29 naturally works. Are there two IMEIs?
EDIT:
Screenshot of Dual Sim settings, screenshot of call protocoll, photo of package with phone.
And yes, where I live is nearly no signal - thanks Vodafone! It's a big city in Germany an there's no signal...
Click to expand...
Click to collapse
There must be a hidden imei in the hardware?, sounds crazy. The L29 comes with 2 imei. Can u check in Developer Menu if u have 2 imei, dail *#*#2846579#*#*
@durrarra
Is this possible?
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
There must be a hidden imei in the hardware?, sounds crazy. The L29 comes with 2 imei. Can u check in Developer Menu if u have 2 imei, dail *#*#2846579#*#*
@durrarra
Is this possible?
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
Where can I find the IMEI in this menu? Searched every point but didn't find it.
Jannomag said:
Where can I find the IMEI in this menu? Searched every point but didn't find it.
Click to expand...
Click to collapse
Veneer Informations - Other Info
Sent from my VIE-L29 using XDA Labs
Mostar088 said:
Veneer Informations - Other Info
Sent from my VIE-L29 using XDA Labs
Click to expand...
Click to collapse
No IMEIs.
Hi guys/gals,
So currently I'm stuck with firmware PRA-LX1C432B172, after forcing the update using FirmwareFinder (else I would be stuck at B161). But there are a few new firmwares available (B179 and B181 for single sim and B180 and B182 for dual sim).
Is there any way to force the installation of those firmwares? Because huawei keeps on having new builds and those builds are not made available through OTA updates or even have authorization for install.
The Mate 9 guys have a patched erecovery image that allows them to skip the authentication.
Note: I've been able to install dual sim firmwares on my single sim device (without enabling dual sim) because most firmwares include both a PRA-L11 and a PRA-L31 data package.
randhackr said:
Hi guys/gals,
So currently I'm stuck with firmware PRA-LX1C432B172, after forcing the update using FirmwareFinder (else I would be stuck at B161). But there are a few new firmwares available (B179 and B181 for single sim and B180 and B182 for dual sim).
Is there any way to force the installation of those firmwares? Because huawei keeps on having new builds and those builds are not made available through OTA updates or even have authorization for install.
The Mate 9 guys have a patched erecovery image that allows them to skip the authentication.
Note: I've been able to install dual sim firmwares on my single sim device (without enabling dual sim) because most firmwares include both a PRA-L11 and a PRA-L31 data package.
Click to expand...
Click to collapse
It works the same way. Look here:
https://forum.xda-developers.com/showpost.php?p=74421241&postcount=20
ChinHon said:
It works the same way. Look here:
https://forum.xda-developers.com/showpost.php?p=74421241&postcount=20
Click to expand...
Click to collapse
I've tried the eRecovery trick, it downloads the firmware and in the end gives an error and doesn't allow the firmware to get flashed.
Are there any hardware differences between the P8 Lite 2017 Single sim and Dual sim phones or is it all software differences?
[Guide] Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat "Updated 25.03.2018"
[Guide] Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat
This thread will be discontinued, because Huawei refuses to provide unlock codes in the future, because of security reasons.
A shame that after the support end of the device it will be quite useless, cause you don´t get any security updates and have no chance to make secure again, by flashing someting else.
I recommend you not buy any Huaweidevices in the future cause of that.
Here´s my P10 Guide, the steps are the same for the P10 Plus: Huawei P10 Plus Debrand/Rebrand/Update for Oreo&Nougat
Just use the following files for the P10 Plus instead:
TWRP for P10 Plus
@AndroidFilehost: HWOTA_VKY-L29C432_B365.zip (Oreo) MD5: 0858c05a98053ad5043dfaf7041ec54e
@Mega: HWOTA_VKY-L29C432_B360.zip (Oreo)
@Mega: HWOTA_VKY-L29C432_B177.zip (Nougat)
Doesn't work on a converted single sim UK P10 plus to dual sim. Used this method to go back to B123 to get the phone to work. It was showing a different model number each time I tried to update to B177 using this method.
abdulhamid1978 said:
Doesn't work on a converted single sim UK P10 plus to dual sim. Used this method to go back to B123 to get the phone to work. It was showing a different model number each time I tried to update to B177 using this method.
Click to expand...
Click to collapse
Did you already use this method before? Seems you messed up with the 1 of the 3 updatefiles. Especially the update_all_hw.zip which is only for the l29 or l09.
Did you try to update via firmware finder and did you make check with imei in that tool? That should fix your problems, if you use the FullOTA.
LwannaCM said:
Did you already use this method before? Seems you messed up with the 1 of the 3 updatefiles. Especially the update_all_hw.zip which is only for the l29 or l09.
Did you try to update via firmware finder and did you make check with imei in that tool? That should fix your problems, if you use the FullOTA.
Click to expand...
Click to collapse
The FULLOTA in firmware finder says 'The firmware is not approved for installation'.
I have VKY-L09C432 which I converted to VKY-L29C432 and was on B170. I used the 3 update files from the the link you provided in step 2 'HWOTA_VKY-L29C432_B177.zip'. Was I supposed to change any of these files?
abdulhamid1978 said:
The FULLOTA in firmware finder says 'The firmware is not approved for installation'.
I have VKY-L09C432 which I converted to VKY-L29C432 and was on B170. I used the 3 update files from the the link you provided in step 2 'HWOTA_VKY-L29C432_B177.zip'. Was I supposed to change any of these files?
Click to expand...
Click to collapse
No, i think you just haven´t read the guide carefully. In firmwarefinder choose an older one, that is approved for installation.
LwannaCM said:
No, i think you just haven´t read the guide carefully. In firmwarefinder choose an older one, that is approved for installation.
Click to expand...
Click to collapse
I am back on L29C432B170 via normal OTA.
Probably messed up on 2. Run the update.bat file from a preopended CMD with adminrights, It will ask you if you copied the files. Press any key to continue.
I just ran update.bat file as an administrator. That was the only thing I did differently to the guide.
Hello guys!
So I recently bought a "Huawei P10 Plus VKY-AL00 6GB RAM 128GB Dual-Sim" from China. I want to rebrand this model to "Huawei P10 Plus VKY-L29 6GB RAM 128GB Dual-Sim". Ive unlocked bootloader. So what shall I do now ? This tutorial above is for the european model. Please help me thx!
No connection to the mobile network after rebranding
Hi
I went through all your described steps and everything worked fine. However, I've got a strange problem.
I have different SIM cards available (multiple mobiles), but only one (prepaid from croatia) is working after the procedure. The ones from Vodafone Germany and Swisscom do not work.
They work fine on other mobiles. Everything else is working fine on the P10+. The SIMs not working, are displayed in the phone, but will not connect to the mobile network of any provider.
No available networks are listed. Both SIM-slots tested.
Any idea, where the problem could come from?
Thanks for your help.
how to convert VKY-L09C432 dual sim to single sim?
Sorry for stupid question. I'm having VKY-AL00 with B217 firmware. I guess soon I will update it to Oreo. Am I still capable for rebranding?
yukato said:
Sorry for stupid question. I'm having VKY-AL00 with B217 firmware. I guess soon I will update it to Oreo. Am I still capable for rebranding?
Click to expand...
Click to collapse
You can still rebrand, but AL00 is already dual sim if that's what you were after.
---------- Post added at 10:05 PM ---------- Previous post was at 10:03 PM ----------
Gamkutopolowk said:
how to convert VKY-L09C432 dual sim to single sim?
Click to expand...
Click to collapse
There's a walkthrough for using HWOTA to rebrand to the L29 model: https://forum.xda-developers.com/p1...nvert-to-dualsim-huawei-p10-plus-vky-t3605071 Works very well, changed my Fido/Rogers L09 without any issues. The instructions can be a little confusing but you should be ok if you've flashed phones before.
singularoctopi said:
You can still rebrand, but AL00 is already dual sim if that's what you were after.
Click to expand...
Click to collapse
I'm thinking to go from chinese to european firmware may be The reason is I can't turn my location history ON in Google Maps And It seems I'm still having some notification problems.
TWRP not working
Hi,
I can't get TWRP to work on my VKY-L29. Everytime I try to get in TWRP, I get into the normal Huawei recovery again. Phone's Bootloader is definitely unlocked and it also says that writing the TWRP was sucessful. I followed all the steps as they're written. Any thoughts on how to fix this?
Rommco05 said:
Unplug phone from cable and turn off. Turn on with holding vol up+power button, when u feel vibration release power button and vol up
Click to expand...
Click to collapse
when I do that i get to the screen saying: phone is unlocked an can't be trusted... If I then prss volume up to enter TWRP I still get into the Huawei eRecovery.
I have p10 plus VKY-L09 with C55B140 (Tim IT brand) and with firmware finder i check for C432B175 and firmware finder say it's aproved for installation...
So, it's fine to update/instal?
bondaru18 said:
I have p10 plus VKY-L09 with C55B140 (Tim IT brand) and with firmware finder i check for C432B175 and firmware finder say it's aproved for installation...
So, it's fine to update/instal?
Click to expand...
Click to collapse
I don't know what to tell you...I got firmware finder as well but my latest update was 2 days ago and now i got B177.The chinese phones already got Oreo update (yesterday,two days ago). I recomand you to not update yet,use HiSuite and connect your phone to your pc.I did get B170 using the cable and having installed on my pc HiSuite,so good luck.
Hello,
Tried following the guide but now my phone VKY-L09 shows up as a NRD90M with 2GB of RAM. followed the procedure many times now but still with the same results.
Doing the rebrand seems to work (if i do it twice on the update script it shows VKY-L29C432 but after booting up it still is NRD90M.
I can boot to fastboot/twrp/erecovery without issues.
Used this file HWOTA_VKY-L29C432_B177.zip
I am from Portugal and only need for the phone to have Dual Sim
Mike69pt said:
Hello,
Tried following the guide but now my phone VKY-L09 shows up as a NRD90M with 2GB of RAM. followed the procedure many times now but still with the same results.
Doing the rebrand seems to work (if i do it twice on the update script it shows VKY-L29C432 but after booting up it still is NRD90M.
I can boot to fastboot/twrp/erecovery without issues.
Used this file HWOTA_VKY-L29C432_B177.zip
I am from Portugal and only need for the phone to have Dual Sim
Click to expand...
Click to collapse
Guys I really need some help on this please. It's the only phone I have.
Mike69pt said:
Guys I really need some help on this please. It's the only phone I have.
Click to expand...
Click to collapse
Had a similar issue. Got round it by following this guide to rebrand then used the firmware finder app to install the latest available vky-l29 update. After that I unlocked bootloader again and flashed twrp and installed magisk.
baddesthad said:
Had a similar issue. Got round it by following this guide to rebrand then used the firmware finder app to install the latest available vky-l29 update. After that I unlocked bootloader again and flashed twrp and installed magisk.
Click to expand...
Click to collapse
Could you please give me some more details on how to do this? When i rebrand using this guide and boot it's got the nrd90m
Hello!
Some one can link me / write me how can I update my P10 to the latest version using the "sd card" method, or even tell me it is possible to update the dual version? Unfortunately my phone stucked with B151 fw and I want to perform an update without using the service.
Thanks!
mobal,
mobal said:
Hello!
Some one can link me / write me how can I update my P10 to the latest version using the "sd card" method, or even tell me it is possible to update the dual version? Unfortunately my phone stucked with B151 fw and I want to perform an update without using the service.
Thanks!
mobal,
Click to expand...
Click to collapse
Use Firmware Finder. It's the easy and Best way to update
I have a Huawei P9 that doesn't seem to receive updates.
EMUI 4.1.1
Build: EVA-L09C900B182
Andriod: 6.0
I have tried using firmware finder but I always get checksum failed before it passes 1%.
I had a look through the Forums and it seems that people recommend rebranding though that was in 2017.
I was wondering if there is any easy way to update?
I am a noob so i want to try avoid rooting and rebranding if possible.
Has anyone managed to update this?
2 years later and I'm still trying...
focussss said:
Has anyone managed to update this?
2 years later and I'm still trying...
Click to expand...
Click to collapse
For c900 there is no newer firmware.
Flashing anything else than c900 means rebranding - but rebranding requires unlocking Bootloader (not 'rooting')
So wandering, what are you really trying to do for two years?!
- Unlock Bootloader (4 Euros):
https://www.dc-unlocker.com/
- Rebrand properly to be able to update to Nougat eg EVA-L09c432b504:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
I followed that guide but now my phone is stuck on "Type the password to decrypt storage" when I enter my Google password it says it's correct but data on my phone is corrupted. Any ideas?
focussss said:
I followed that guide but now my phone is stuck on "Type the password to decrypt storage" when I enter my Google password it says it's correct but data on my phone is corrupted. Any ideas?
Click to expand...
Click to collapse
Are you talking about TWRP asking for pass or Android?
If Android, on which firmware are you, what was the last step you performed?
Also, make sure you used TWRP for MM, not for Nougat - since you were on c900 MM when you started with rebranding to c432 (?)
Btw, you unlocked the Bootloader?
Thanks for the quick response and all your assistance. I managed to finally boot into EVA-L09C432B182 and will write what I did in the rebranding post for others who run into this issue. I still have no updates on L09C432B182 though.
focussss said:
Thanks for the quick response and all your assistance. I managed to finally boot into EVA-L09C432B182 and will write what I did in the rebranding post for others who run into this issue. I still have no updates on L09C432B182 though.
Click to expand...
Click to collapse
For OTA you must have a valid SIM card and WiFi - check manually to the System Update to trigger checking for an update
You can also try with HiSuite (PC) - latest versions of HiSuite have an option at the bottom to update the firmware
See:
https://huaweiflash.com/how-to-flash-huawei-stock-firmware-all-methods/
You can also update by DLOAD (read the guide above), you must download FullOTA-MF-PV (must be PV), like b360, from Firmware Finder
There is also HWOTA method, see:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3