What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
i second that also
this key doesn't answer the incoming call
is there someone else has this problem ?
anyone actally used the handsfree kit?
The wired one? I use mine all the time, answers calls here, and a double press makes it dial last number..
hi, i'am also having the same issues.
the silver button does not pick up calls.
has anyone found a solution for this?
I have the same problem
I live at HK
I have been to the Service Center,
But denied it is the handfree fault but the rom bug..
I argued with them, then changed to a new handfree,
but the problem still there....
Hi everybody,
I'm new here and very grateful for all the brilliant solutions you guys come up with to all sorts of issues with x1.
I have the same problem with my hands-free: the button doesn't work and neither does the microphone. Until now, I've thought of it as a simple matter of replacing the hands-free kit, but now I see the suggestion that this is a Rom bug! Will anyone be able to elaborate a bit on this?
thanks and best regards,
Sune
Really not sure it is real or not that is a rom or software bug,
but sure quite a number of problem of people experienced such problem!
I hope SE not to put a death ear on this issue.
It is really annoying as I quite often used the handfree.
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
seljean said:
hello everyone
the same problem on my russian x1 handsfree. Have tried to fix it with some patches - no results. Then I've bought Nokia Xpress music handsfree, and it works perfectly (and radio works too).
update
VERY SAD, but it doesn't fix the problem. bad quality of X1 jack - thats the problem. Xpress key doesn't answer the incoming call periodically too, but handsfree itself working good all the time
Click to expand...
Click to collapse
The first time i got to know the headphone dosen;t work in answering call, I really feel astonished. It is such a basic function of phone, how can the genius of SE dose not test it. Do them think we will buy another handfree???
Really disappointed of SE.....
swazpurohit said:
What is the silver button on the original handsfree kit meant to do? when i have an incoming call it wont pick up so, so is there meant to be another function to it or something? thanks
Click to expand...
Click to collapse
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
same case here. im really disappointed...
i guess that if i can when asus glaxy came out i will change mi xperia for that one... this phone is really "buggy"...
Same probleme here unfortunately.. I tried to remove all
additional programs related to dialing and volume,
switched to the new ROM, but no changes. Button on headset
does not work and microphone neither.
I also have same issue, both HK new stock ROM & cook rom also.
i'm form India, had purchased Xperia X1i and using Airtel network. when i connect my hands free and attend one call the moment second call come, automatically my loud speaker gets activated.
is any facing the same problem in Indai or any where else? will any one help me this.
is there any solutions?
squarecircle said:
Hi I'm Chris from Sri lanka,
Yes, I have the same issue! The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially! It is very temeperamental and annoying. I also have a problem when I get an another call when I'm already on a call while using the handsfree. The current call goes to speaker phone and the party cannot hear wht I'm saying through my handsfree!
So I am forced to remove the handsfree and talk during such instances! Crazy this, especially since answering phone calls is one of the core functions of a cell phone! what's the point in having all the frills when answering a call is so tedious!
This is very disppointing, especially with such a high price tag to boot!
Click to expand...
Click to collapse
even i facing the same problem.
is there any solution
The handsfree seems to work when I remove it and re insert the jack during an incoming call, but not initially!
Click to expand...
Click to collapse
Samething here, and the above works for me too (Remove and re insert), but SE really need to fix this for us.
I believe it's a hardware problem, bad 3.5mm jack!
My right earphone's volume has fallen to one tenth. I have it for less than a month. Good listening but bad manufacturing quality.
Personally I don't think it's bad hardware, I think it's bad firmware/rom.
Currently, with GENERIC UK ROM R2AA010, three presses of headset button dials last number, long press disconnects. Not tried incoming call yet.
I really need to be able to customize this buttons function, especially to activate Voice Command, so that I can make calls, play music etc, without the need for touching the phone. Only then, will I be able to make a button for the handlebars on my motorbike.
Want to use a fully wired system to save on battery power, rather than bluetooth. Also, in all the years of using bluetooth, I have yet to find a combination of handset and headset that work seamlessly.
So far, not impressed with the lack of functionality of this headset, but can see why it works like this. Essentially SE should have included Voice Command, then this hardware/software combination would have been shipped working effectively. I think it is merely a cost saving exercise and SE need to provide a patch and fix in their next rom release.
Hello
I just changed my TYTN II for a sony xperia. I love the features of this phone.
I paired it with my Pioneer avic F90Bt. With the TYTN it was working perfectly.
Now with the xperia, when I receive calls everything works fine (I even did the tweak to solve the hang up problem).
However, when I call (using the phone of the Avic) there is a big delay. I never hear the phone rings(must be 15 seconds at least) before I hear the person.
I does only that in bluetooth. It's like if the phone doesn't sense noise, I see dialing on the phone even if it is connected. After the 15 seconds, it shows connected and then I hear the other person.
I search in this forum and with google and did not find anything related to placing calls, only to problems receiving calls.
It is the xperia from rogers with the R3 update already done.
Greetings
Labgate
Hello again
just to give an update, it seems the problem is related to the detection of sound.
When someone speaks loud, then it switch, but the ringing sound and a small "hello" don't do the job.
I will continue to investigate. I hope someone will be able to give me some hints.
Greetings
Labgate
Hi,
Is here allready someone who got isecretary working well on the diamond touch as an answering machine?
i cant get it working right.
it records the incoming calls, but also put it over the speaker. when i bring the speaker volume down, i dont hear my welcome record at the other phone... so is here someone who get it working like you record a welcome message, when someone calls you, isecretary picks up the call, plays your welcome message ONLY to the caller, and then records the callers message, without playing it over the speaker? if so, how did you do that?
much thanks,
Bart
iSecretary
VolgensBartjes.nl said:
Hi,
Is here allready someone who got isecretary working well on the diamond touch as an answering machine?
i cant get it working right.
it records the incoming calls, but also put it over the speaker. when i bring the speaker volume down, i dont hear my welcome record at the other phone... so is here someone who get it working like you record a welcome message, when someone calls you, isecretary picks up the call, plays your welcome message ONLY to the caller, and then records the callers message, without playing it over the speaker? if so, how did you do that?
much thanks,
Bart
Click to expand...
Click to collapse
Did you get this working?
hi,
i still dont get it working wel on my diamond... the site is allready offline for a wile. the file of the latest version is online at:
http://www.freeware4mobile.com/Software/Windows_mobile/Phone/iSecretary/iSecretary4_6.cab
first i was able to get it answering and recording, but it played it over my speaker, but this time i tried it again, he even doesnt pick it up... but at the internet a saw positive storys about it...
would be nice if anyone had good experiences with it... or if the developer would go on with the program ...
allready some who get this working OR got an other program?
In Utopia, this software would do the following
1) Intercept an incoming call
2) Tap into the mic system and playback a predesignated audio file such that no one else but the caller can hear it
3) After the message has played, it then taps into the ear piece system and records the caller's message. Again, no one else but the phone can hear this.
4) Provide you a notification for the message you have received.
In reality, this is not possible. Here's why
1) Telecom providers would lose a pretty significant amount of money that they charge you for voicemail services.
2) I'm pretty sure that the above reason is why a lot of hardware manufacturers don't allow intejcting an audio stream into the mic system.
This is why you never get the result you want with all the "phone answering machine" software out there.
The way these programs work is they turn on your speakerphone and play the message loud so that the mic can pick it up and your caller hears the message.
In the same way, when the caller talks back it plays it loud and the mic again picks up the sound and records it.
Hello guys,
I just face the problem which is, when I call or receive call, the caller/receiver cannot hear my voice but i still can hear them clearly, I try with loud speaker it same too.
BUT when I try use Audio Recorder, it work fine.
I have try flash many roms, factory reset, but still all same. I don't know where the problem from.
Anyone can help me?
Thanks
Hey guys I have a strange Wireless Headphones/Airpods bug on my mi 9.
And as reading on the internet, it's not only on the mi9.
Most of the time if I'm connecting my wireless headphones and calling someone. The other Person can't hear me.
I need to mute and unmute my mic on the Phone.
After that's it works.
In one thread for the mix A3 someone suggested to change the sim card slots.
After this the mic was working perfectly.
But now after I rooted my mi9 and and installed Xiaomi Eu instead of the global EU.
The mic stopped to work.
Funny thing it only happens on a Xiaomi Phone
OnePlus with LOS works perfectly.