Related
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
I have the same problem?!
Nobody for help a desesperate newbie ..?
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Try full wipe, flash ROM ,gapps ,magisk and reboot.
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Try this!
-Your data and cache Partition must be in ext4 format.
-Enter in twrp recovery wipe Dalvik, system, data and cache Partition.
-reboot to recovery
-install just the ROM zip without gapps ir another addon
- reboot to system
If the boot is not sucessfull, reboot to twrp and wipe data Partition only.
-if the boot is sucessfull, reboot to twrp install gapps and reboot to system again.
After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot
Ps- this last boot takes a Little more time dont sorry
Hope i helped
newbie_or_not_newbie said:
Hi,
Since few days, I'm facing bootloop when I install an oreo custom rom on my santoni (3gb/32gb)
I tried every step :
from Miui eu rom, flashing twrp by nikesh, firmware 34, oreo rom, gapps...
Full wipe, etc...
I even tried to erase the whole memory of the phone.
Every time, I get bootloop...
Can't understand because I already installed some oreo roms in a recent past, but now, I'm lost !
What can I do ?
Thanks for your help.
Click to expand...
Click to collapse
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
Sr
---------- Post added at 06:07 AM ---------- Previous post was at 06:03 AM ----------
newbie_or_not_newbie said:
Nobody for help a desesperate newbie ..?
Click to expand...
Click to collapse
Answered as below
S r
{
Hello,
once installation of new ROM done, install Gapps as well. once it done?
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, All the best...
}
---------- Post added at 06:14 AM ---------- Previous post was at 06:07 AM ----------
newbie_or_not_newbie said:
Still bootloop.
I tried what you said, full wipe, flash rom, gapps, magisk then reboot.
Really don't know why it doesn't work anymore with oreo custom roms.
Click to expand...
Click to collapse
Here you go
once installation of new ROM and Gapps as well.
Here to go >>
Twrp > Advanced > tools > Disable verify. once done, wipe caches/dalvick and then reboot from there (you would see end of disabling verify)
But, I'm not responsible if your phone went Brick at any cause, but it will take 5mins at least to login. All the best...
S r
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
newbie_or_not_newbie said:
Thanks for all your help.
For the moment, I'm tired to try every day since weeks.
So I keep staying with a Nougat Rom, which is working, soon I'll try again with an Oreo Rom !
Thanks a lot again !
EDIT : @Speaker87 :
your solution is fine !
Except the last "After the boot if you want to configure Your Google account reboot to twrp and swipe to factory reset and no more!
- reboot", which gives me bootloop.
If I don't swipe to factory reset, Play store gives me FC... Google Play services too.
EDIT 2 :
Strange, I have bootloop but can hear the startscreen sound (if you understand my bad english...)
Click to expand...
Click to collapse
In that case , in the last step, instead of swipe to factory reset, format only data Partition, and reboot!
Try that
If after the reboot , you are in bootloop, reboot again to twrp and format data Partition again!
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
newbie_or_not_newbie said:
Thanks again for help.
Do you think the problem could come from Gapps ?
And also I'm using the double sim.
Before, I had a sd card, which had the roms (zip) on it.
Could the problem come from this too ?
Click to expand...
Click to collapse
Today, i flashed a new Oreo ROM! I passed all the difficulties that you already described! I remember that i read Somewhere in xda to remove sdcard and sim trata, on the last step (after flash ROM, boot, flash gapps boot, format data Partition, and then remove sim tray and boot again) . The boot occurs normally, 2-3 minutes later Google configuration wizard pops on screen. I think the problem is Oreo adjacent, or a encription problem! Don't know exactly...
Try to install micro gapps instead of pico apps
If the phone starts make your settings an go to Recovery.
Backup your data.
Make factory reset
Install rom
Now you can install pico gapps
Restore data
Restart
I have the same problem ,
with all of the oreo roms ,
if i do not flash the gapps phone does not bootloop
i tried pico/mini/nano gapps
Hi
So, do you think it could be ok if I flash micro or stock gapps ?
Like @sptepacate, if I don't flash gapps, the phone boots.
If I flash gapps then, the phone boots but google account bootloops...
Hurray !
I followed every step of @Speaker87, with extract of sim tray...
Now, I'm using AEX oreo 8.1 on santoni....
Thanks a lot for help !
Thank you , worked for me too for Nitrogen OS
Glad i could help!
Best way is :
- Wipe - Format data - type "yes" - ok.
- and then install newest TWRP
i've tried all the steps provided but i still get bootloop
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Did you tried another recovery? Try Batik Recovery!
Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.
Amir_espie said:
Hey there, how about u try to install Pitchblack twrp the latest one and install Pixel experience pie riva, it can be used for rolex also because the developer make the rom to unified for both rolex and riva. Then install the magisk after that. I've been using pixel experience pie for a month and it is so far so good.
Click to expand...
Click to collapse
Sure,will give it a go
An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys
Solved Magisk Error!
I've been using Pixys OS on my Redmi 4A and it works fine smoothly. I recommended to clean wipe before installing. Android Pie us amazing and I've installed stable version. Do backup before clean wipe.
For Magisk I recommended this: https://freaksterism.blogspot.com/2018/10/solved-cannot-mount-vendor-magisk.html?m=1
It worked for me. Also go through this step before any custom ROM. Do let me know the status
Anirudh15 said:
An update
I installed Batik recovery.Magisk could be flashed but Im still getting the decryption unsuccessful message when I install Pixys
Click to expand...
Click to collapse
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.
You have two problems.
Anirudh15 said:
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
You need to flash the twrp separated vendor version by my friend Offain https://androidfilehost.com/?fid=962187416754475993
The other problem with the decryption:
You must enter in the twrp press wipe and format data. Type yes and then reboot into twrp again. After that flash the rom and gapps and you will not have the decryption problem again
Anirudh15 said:
I dont know if this is the right place to post this issue,sorry if this violates any rules
Recently I've shifted to custom roms on my device.I've always wanted to use one of those 9.0 ROM's.I tried 2 flavours-Pixys and Havoc.Both based off 9.
I tried flashing it with TWRP 3.2.1-0,as soon as I installed and rebooted it shows me Decryption failed and proceeded to factory reset my device.I had to repair my phone's file system to EXT4 to correct it and install an 8.1 based rom
Since I thought it might have to do something with TWRP, I tried RedWolf Recovery and tried installing Pixys and Havoc only to return to the same "Decryption Failed" issue.
Is there something different that I am doing?Can anyone help me in this regard.
Also,Im not able to install Magisk, recovery shows me Error-1 Couldnt mount vendor partition.What's the solution to this?
Click to expand...
Click to collapse
I had the same problem. Its because your phone is encrypted. The only solution I found is to boot the device into fastboot and using command: [fastboot format userdata] on PC. This will wipe all data off your phone so do backup. It removes encryption and now you can install any custom rom.
Decrypt ur phone first then flash, use twrp vendor
athish said:
to solve decryption unsuccesful message, format data (Wipe>Format Data) after installing the rom, make sure you backup your internal storage coz Format Data will also ERASE the internal storage. This how i got over the decryption unsuccessfull message. hope this helped.
Click to expand...
Click to collapse
Format Data was the only thing that worked for me. First backup everything on your mass storage.
Edit: Figured out the missing step! Wasn't mentioned on any guide I read, or if it was, I'm afraid it wasn't clear :'( Hopefully this guide helps other people though, I've highlighted the step I added!
Hi Mi9 Forum!
Longtime S7 user here, I've flashed (literally) hundreds of roms over the years, but unfortunately lost my device so switched to a Mi9 (Which is ****ing huge!)
Earlier today, after the (arduous 1-week wait) I unlocked my phone (now reads unlocked on boot up), and set about testing three different roms.
From what I understood, I needed to flash a Vendor image before the actual rom itself, so I installed TWRP, flashed the vendor image, then tried flashing the ROM, but alas, I got kicked back to TWRP.
The steps I've taken a listed below, perhaps I've missed something obvious, or not so obvious, but any help would be appreciated!
UNLOCKING
Unlocked phone with Mi tool (Reads unlocked on bootscreen now)
Booted into Fastbook (Vol down + Power)
Plugged in
Used MinimalADB to push TWRP (3.3.1.42) onto my device
Unplugged and rebooted (Vol up + Power)
Plugged back in and entered into TWRP (Huzzah!)
Pushed two files into my "/tmp/" folder, these were xiaomi.eu_multi_MI9_V11.0.2.0.QFACNXM_v11-10.zip, and Magisk (V20)
Went to Wipe > Format Data > "Yes"
Back to TWRP Home, went to Install, and installed the xiaomi.eu mentioned above, then installed Magisk
Once both were done, I restarted, phone loaded up perfectly fine, and had Magisk installed
It was at this point I decided to try a custom rom:
CUSTOM ROM
Booted into TWRP
[*]Selected to Wipe > Format Data > "Yes"
I wiped System, Vendor, Data, Cache, and Dalvik
Pushed the Vendor 9.8.1 file into my "/tmp/" folder, along with whatever ROM I was testing (Tried with Syberia project, AOSPExtended, and ResurrectionRemix), GAPPS, and Magisk
Flashed the Vendor file
Flashed the ROM
Flashed GAPPS (Where it wasn't included with whatever ROM I was testing)
Flashed Magisk (This began giving me ERROR-1 here, even though it was exactly the same file that worked fine earlier.)
Once all that was done, I restarted the phone, it booted up fine, I saw the "Mi" bootscreen along with the "unlocked" at the bottom...Then the phone restarted.
It went to the same bootscreen once more, before restarting once again, and kicking me into TWRP.
I've tried it several times now, with different roms, both with/without installing GAPPS/Magisk, but I always get the same result.
I've been on these forums for a while, I know usually people post without reading, but that's not what I've done, I've read up on what to do, downloaded all the necessary (I think!) files ahead of time, and documented everything I did (in-case of a cockup!). So yes, I really have tried, and I really have searched
Any help, or direction, or hints, or magic wishes anybody can give me regarding this would be much appreciated!
same problem happened to me
i face the same problem every time without any solution i can only flash miui roms not aosp roms?
maheg said:
i face the same problem every time without any solution i can only flash miui roms not aosp roms?
Click to expand...
Click to collapse
Using the above steps, I have been able to flash AOSP, and Miui roms.
Though I always go back to Miui because it has the best camera app.
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.
Hey everyone I recently installed cn rom v5.11 in my red magic 3 and also magisk 23.0 with twrp 3.3 latest as it posted by seniors , I have facing a problem encrypted internal storage even I wipe all my data several times still facing this problem ,I tried to flash force decrypt but it's given me error 1 even after flashing boot.img again , I need your help dear seniors developers I know you know better and have faith on you guys Tysm sir
Mechbeant said:
Hey everyone I recently installed cn rom v5.11 in my red magic 3 and also magisk 23.0 with twrp 3.3 latest as it posted by seniors , I have facing a problem encrypted internal storage even I wipe all my data several times still facing this problem ,I tried to flash force decrypt but it's given me error 1 even after flashing boot.img again , I need your help dear seniors developers I know you know better and have faith on you guys Tysm sir
Click to expand...
Click to collapse
Hi. You can use version v5.16. It can install twrp and root. However, if you use google, you must flash nikgapp as an alternative to gapp and some games will not be able to update and install successfully.