Hello All,
Following my post from 9 months ago (https://www.reddit.com/r/LineageOS/comments/8iwxke/moto_x_2014_victara_stuck_on_start_up_screen_at/), my Moto X 2014 presented the behavior again. Stuck on a bootloop after the battery discharged.
I have replaced the battery like 8 months ago, after some full wipes it was working again.
It lasted for a long time, but again I had to do a full wipe to make it work (partial wipes and file system recoveries did not work).
Any tips on how to recover from this without a full wipe?
Related
When I reboot to recovery it takes f-o-r-e-v-e-r for it to load up. It just sits at the splash screen for a full 2 or 3 minutes (maybe longer). Anyone else experience this? Is there a fix?
2013 Moto X
Verizon Dev edition
Stock, rooted, xposed, twrp
Well, I did a factory reset and then wiped internal storage and it's fixed. NOt sure what the problem was but at least it's fixed.
Hello,
I'm new to unlocking / rooting / image flashing etc etc. However, I was excited to see Moto X 2nd Gen is finally unlockable so I went ahead and completed that process. I have an XT1096 on VZW.
I followed Mikeoswego's directions to run 5.1 on XT1096 detailed here: http://forum.xda-developers.com/mot...1096-victara-mofo-image-root-t3100145/page103
However, after flashing the images and rebooting my phone, it plays the motorola world animation then the screen goes black. I've let it sit for a few minutes to no avail. This happens every time i reboot it. I've tried reflashing the images as well, no difference.
Any tips on what i should do next? At least just to get it working as normal again?
Thanks,
Ryan
i had issues with that version of the stock rom after reboot, Its from the same mike user. Boot into twrp Recovery and then copy this firmware to the downloads folder. https://www.androidfilehost.com/?fid=24052804347797814. Then get the stagefright update and cm launcher from here http://forum.xda-developers.com/moto-x-2014/development/img-xt1096-victara-mofo-image-root-t3100145. Flash both those files and then if you want can run the debloat on same page as above. Then make sure ya flash a 5.1 version a gapps file too, (http://opengapps.org/) then reboot phone. Being i had accidentally wiped my phones partition during a reboot I had to start from scratch in the recovery but got it all working again. I was worried mine was bricked too but Im back on CM13 now but have been going back to the stock as well since it has better reception on verizon than CM12 or CM13 currently. You should get moto boot image animation, and will cycle through all the stages and after a few more mins of that moto screen it will begin the setup page on the phone.
Thanks very much. I replied to your PM but I also wanted to mention the issue is resolved here. I was able to flash CM 13 after i figured out how to properly use TWRP.
I've got a lot of learnin to do in this realm.
The phone just died for the battery ( i have the battery problem of this phone, it dies on 20% battery like you disconnect the same) and I charged a little (20%) and when I boot it up, the phone is soft bricked (just ROM boot screen and vibrates occasionally).
I have last LineageOS Nightly for the phone, root, and busybox.
I had this problem a few times in the past and i successfully solved it by erasing data in TWRP, but its REALLY FRUSTATING format all the apps and start again without previous backup.
I want to find the way to solve it without formating the /data.
Hope help of any of you, thanks<3.
PD: Sorry for my bad English.
Hi friend,
i have the same problem with Ressurection Remix V5.8.2 (Moto X 2014), i found a "fix" without lose any data, simple re-flash with before version of the rom (and clean cache) (in my case Ressurection Remix V5.8.1) and start phone, after boot (ignore some app errors) quick reboot in recover mode and re-flash with the actual version of rom you use (clean again cache) (in my case Ressurection Remix V5.8.2).
Good lock.
Fabiano Souza
Hey bro,
I have the same issue when I have opengapps installed. So it may be fixed with uninstalling opengapps.
It works on ViperOS v2.1 although brings inconvenience
Good luck
Same problem here (for the second time) and occurred on 31st July 2017
zureau said:
Same problem here (for the second time) and occurred on 31st July 2017
Click to expand...
Click to collapse
you try the tips in the post? Same problem after try?
Please help: Constant "Android is starting" on every reboot. Moto G 2014 XT1068
Hi,
On every reboot of the Moto G 2014 XT1068 the phone acts as the system or apps have just been installed for the first time ever and gives the "Android is starting" - "Optimising App X of XX" message.
I've tried many many different custom ROMs while trying to find a fix but it keeps happening. Currently installed is Minimal OS ROM but prior to this Liquid Dark was installed, as was Dirty Unicorns, Cyanogen Mod, MicroKat etc etc. I've wiped the phone and followed all best practices but nothing seems to stop it from doing this.
The last thing I did was to backup the phone using TWRP, I then wanted to reboot but reboot was NOT showing on the TWRP recovery manager for some reason, (hmmm) so I chose "Shut down" and then powered on and low and behold here we go again!
It's been saying it's optimising apps for 39 minutes now. It keeps restarting the process.
Can someone please advise me? I've never experienced these many problems before with a phone, first it was the battery and now this.
Thank you.
I have not used your phone but that issue may be caused due to installing of app (I had a game which created that problem) or try clearing cache in recovery or data and cache both
Hello guys,
the title says it all: i've bought this second hand MI PAD 4 Plus. It had already Pixel Experience installed, (pretty nice rom btw), but i've used it for some weeks and then, one day, i forgot to charge it and it went off, of course. Well, since then, it booted only into TWRP. I couldn't make it boot the system again, until I formatted Data and basically started over all again.
It happened again a couple of times, so I decided to move to another rom: installed twrp-4.19-3.7.0_9-clover-20221113-0854.img, lineage-20.0-20230222-UNOFFICIAL-clover.zip, and NikGapps-wossgebberSLcustomgapps-arm64-13-20230223. Performed a Factory Reset, booted up, LineageOS runned GREAT.
But guess what, I tried to turn the tablet off and again, when turned on, it booted TWRP only. Had to factory reset again.
Am I missing something? Maybe it's something related to encryption?
Thank you very much!
McJefferson said:
Hello guys,
the title says it all: i've bought this second hand MI PAD 4 Plus. It had already Pixel Experience installed, (pretty nice rom btw), but i've used it for some weeks and then, one day, i forgot to charge it and it went off, of course. Well, since then, it booted only into TWRP. I couldn't make it boot the system again, until I formatted Data and basically started over all again.
It happened again a couple of times, so I decided to move to another rom: installed twrp-4.19-3.7.0_9-clover-20221113-0854.img, lineage-20.0-20230222-UNOFFICIAL-clover.zip, and NikGapps-wossgebberSLcustomgapps-arm64-13-20230223. Performed a Factory Reset, booted up, LineageOS runned GREAT.
But guess what, I tried to turn the tablet off and again, when turned on, it booted TWRP only. Had to factory reset again.
Am I missing something? Maybe it's something related to encryption?
Thank you very much!
Click to expand...
Click to collapse
Is that version of Lineage 20.0 by kyasu or saber-op? The first one is based on 4.4 kernel so it would definitely give you a problem but the second is based on 4.19. Also you need to format data after flashing the ROM and not just do a factory reset otherwise you can encounter encryption issues.