Database Develop

[HELP]Your device is Corrupt msg while Updating. tried all ways showed in XDA

Hello developers,
pls help me to Get ride of this
I got this while Updating automatically from settings....which i got update notification
i tried to Flash stock/factory image, due to Unallow OEM unlock, i cudnt go further
Fone is LOCKED,STOCK ROM,NOT EVEN ROOTED, DEVELOPER OPTIONS OFF
i tried to update Android N via ADB SIDELOAD..............its not even detecting the zip file
it says... " Loading ..zip file " and get stuck PC
after few min, " installation aborted" displays in fone
i donno what to do .......pls help me
any way to solve this
thanks

If you can still get into recovery, download the latest OTA zip from Google's developer page, copy it to your internal storage, and flash it using the recovery. It will wipe your device storage, but at least your device will function again.

P9 soft brick, tried quite everything

Hi
So I've been trying to set my P9 Plus back to stock, unless I experienced an unknown error during the flash and I got stuck outside the OS, with the black screen warning me that " the phone is unlocked and it can't be trusted". I tested some other firmware but no luck, also for some reason now I can't even access the TWRP. I'm stuck even outer at the moment, I can access only the white bootloader. I since tried to flash TWRP again, following this guide https://forum.xda-developers.com/p9/how-to/huawei-p9-brick-easiest-to-unbrick-t3662348 for the update extractor, but from adb/fastboot I get the FAILED (remote: Command not allowed) error. Looked for most of the solutionfor this step but none of them worked.
I gave a chance to the HWOTA7 tool, to HiSuite, to automatic update too, no progress at all
What could be the next move?
Thanks a lot for the support

Same
Exactly same issue here. Phone boots (when it wants to) but unresponsive (apps won´t open).
Somehow either partition became read only or partition completely gone.

Micro sd download gyári Rom

MI A2 do not boot, black screen

I tried migration from android one to MIUI12, did all the proccess but when rom was about to be installed, i got an error :
Patching system image unconditionally...
E1001: Failed to update system image.
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/10_MIUI_12_jasmine_sprout_V12.0.1.0.QFGCNM.zip'
Updating partition details...
...done
afterwards i tried to do the miflash and restore my phone to the stock rom, donwloaded it directly from xiaomi website, tried to do the flashing procces but it failed, phone started with a message such like The phone failed to boot previously, do you want to "Retry"/"Shutdown" screen. (I dont know if was these words exactly but it was something like that.) I pressed retry and he didnt load... and now it shows me COM10, doesnt allow me to try flashing or anything, doesnt boot via recovery or fastboot.. when i connect it in PC it gives me the sound of connected but phone is dead..

do you see something in the windows device manager?

LuuchoRocha said:
do you see something in the windows device manager?
Click to expand...
Click to collapse
hey man, thanks to reply, i tried the testpoint, then could flash the original rom of mi a2!!

Huawei P10 VTR-L09 bricked?

Hey everyone,
after spending about 5 hours trying everything I could think of and what I found in all kinds of forums, I'll try here before the phone is gonna be burried.
Got a "dead" P10 from a friend - booted straight to an error page with the headline "Your device has failed verification and may not work properly." My guess is that it was supposed to be updated, didn't have enough memory and then crashed.
Here's what I tried:
Factory reset - aborts at about 25%.
Download of a new firmware version via WLAN - aborts
Upload via SD-Card (dload) - firmware update failed
The phone is not recognized on the PC - so wouldn't know how to flash it from there.
I can still access it via fastboot, but I actually don't now how that could help me
Can anyone think of anything else that could be done?
LG
Maxi

Somebody got any idea?

Huawei G620s problem - No IMEI, locked bootloader

I found one of my Huawei G620s phones, I remember in 2019 it was rooted and started haviing problems, for example it was stuck at the bootanimation or did not work at all (red,green,blue LED), then in 2022 I turned it on just to find no reaction at all, nothing. I ran a flashing tool for Huawei and got it to turn on and display a green screen with 2 boxes, one blue and one red, along with the text:
"bootloader lock state: widevine disable mode"
"press and hold poewr key for 10s or more to forcibly reboot."
and surprisingly, i booted twrp 2.8.6.0 using the fastboot command from my PC. However when it loads i keep getting errors, for example:
"E: Primary block device '/dev/block/bootdevice/by-name/userdata' for mount point '/data' is not present!"
"E: Unable to mount '/data'" and it goes on with '/data/media' , '/boot' '/recovery' '/cache' '/system'.
It also says internal storage is 0MB.
I have tried everything, I wiped everything, I tried the file system changing trick, I tried to repair SELinux contexts and permissions, and it all resulted in nothing. Backup shows no partitions too, mount shows the names but clicking on them to mount does nothing, MTP enabled makes the phone show up in This PC but also nothing appears, and if I had a SD card then it would only show it. I tried to install a custom ROM for example, also nothing. Flashing for example TWRP to the recovery or boot partition using the fastboot command on my PC results in: "FAILED (remote: "partition table doesn't exist").
Now before you say the NAND failed, I once found a random paid tool and downloaded a free version of it. It was called something like Miko service tool and I flashed it in the boardsoft section because the other ones didn't work. And guess what? It flashed the stock ROM for me, but I had to use the phone's testpoint. Then the phone started booting but I noticed something was off, the bootanimation was playing kinda too fast, and it took not so long to boot. Then it booted to a lockscreen with a red wallpaper with the qualcomm logo. After swiping up I just saw like 5 hoem screen pages with only test apps, no google apps no huawei services apps, the phone didn't even have a theme applied and looked like old generations of EMUI, just some apps like settings,browser, camera, dialer etc. The test ones were named "MMI Test" or something. I was happy and decided to just ignore this until I put my SIM card into the phone, reboot it, just to see the error that network communication is unavailable because the device ID was altered. then I opened settings, went to the about phone section just to see my IMEI appear as "0", and serial number was "0123456789AB". Then I ran some codes and got into a test menu, and saw that the device mode was "Factory". I tried everything to disable it but I couldn't, then I got the idea to update the phone with the branded rom that was on it when I got it. And it updated, installed the stock applications but the IMEI and S/N were still gone, bootanimation was still the same (I checked in the ROM zip and it was the branded one so I didn't get the wrong ZIP). Then I booted into fastboot to see the thing that made me scared to death, Fastboot said "Phone LOCKED". I was scared thinking that the phone is done forever, because the bootloader relocked itself. Tried to boot TWRP just for the error saying that it's not allowed to appear, I also tried fastboot oem unlock but it asked for the code. Then I started the phone from the test point again and used an program to reflash it, the program failed and the phone rebooted to the green screen again, then I tried to boot TWRP and it worked. Reflashed the phone again with miko's service tool and same result as before.
Is there anyone that had a similiar problem? I really wanna get this phone back to work, I still have the battery with the IMEI written on it along with the S/N. I just don't know why TWRP is refusing to work, I tried the 3.2 build too but same result. Maybe it's because the bootloader is "locked" ? I ran the command to unlock it in the cmd (fastboot oem unlock) and it said "OKAY [ 0.006s]". It's weird because don't huawei phones need a code to be unlocked? And when I had the OS installed it didn't let me run the command and asked for the code.
Sorry if it's the wrong section but I saw the G620s custom ROMs only being posted in the honor 4x section so I thought it's good.