Hi guys, after a hard brick i restore my phone following the guide for hardbricked devices but now i can't install any kdz because my pc don't recognize my phone to install it. i try reinstalling drivers, reset the pc, other cables.
Other thing after this un-hardbrick my phone can't get rooted, what i mind, even after un-rooting the download mode show me "rooted" at the bottom.
i have installed stock kiktkat v10c.
And the last thing is i can't try to install a custom recovery, when i try my phone got hard bricked.
any suggestions? thx for read and srry for my poor english
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
manoj3101 said:
i was on lineage os, but after that i flash stock firmware 5.1 thrgh command prompt. all done well and device booted after that i got security patch upadate 2016. while installing that update in recovey mode my phone goes off. after that i cant boot mobile i think its hard brick. i am unable to open bootloader too. tried all key combination but nothing happn when i connect phone to pc no devices detected but somtimes green light blink. on phone. i have installed all driver i.e adb and motorola and qualcomn one. but unable to detect device on pc . anyone know solution plz hlp meee. my devices is xt1052 retail asia
Click to expand...
Click to collapse
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
YedanyXD said:
You cant install that update while you were using roms, check videos about to revive the moto x from hard brick
Click to expand...
Click to collapse
found one video but when he connect device somthing like hqsusb appers. but in my case nothing happn when i cnnt device to pc. if u find any hlpful video plz provide me link
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
cyrusct82 said:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
Click to expand...
Click to collapse
u can download updates using adb sideload command and thats what i did
HS-USB Diagnostics 9008 ? In windows device manager?
What do you see in Windows device manager?
Do you see Fastboot, or HS-USB Diagnostics 9008 ?
Did you unlock_critical?
If you see HS-USB Diagnostics 9008, then your bootloader have to be bind to one slot.
Solution: Follow steps of LG qualcomm. You have a hard way a head you, because there or no ready model-files yet that "someone" extracted from our firmware-binary-files.
https://forum.xda-developers.com/verizon-lg-g3/general/fix-unbrick-hard-bricked-lg-g3-vs985-t3467067
You need drivers for Qualcomm installed on windows Qualcomm QDLoader_HS-USB_Driver 32 and 64bit Link is in the link above
Follow internet with these keywords when you search "unbrick HS-USB Diagnostics 9008 " on google. Also there is defferense between in partiotions mountspoint because of different GB-size 64GB 128GB
Don't follow this unless you know your thing: Warning! https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319
This is my partiotion that I flashed and theyr size, size isn't important information but when flashing through Qualcom there is need for specifik hex-code, start-sector to end-block for each partition in the EMMC (phone-harddrive)
PHP:
274*432 abl.img
405*504 bluetooth.img
53*161*984 boot.img
8*388*608 cda.img
225*280 cmnlib.img
294*912 cmnlib64.img
61*440 devcfg.img
16*777*216 dsp.img
41*943*040 hidden.img
262*144 hyp.img
380*928 keymaster.img
17*809*408 mdtp.img
1*081*344 mdtpsecapp.img
114*331*648 modem.img
2*326*528 nvdef.img
53*248 pmic.img
237*568 rpm.img
11*079*680 splash.img
3*758*096*384 system.img
45*056 systeminfo.img
1*945*600 tz.img
3*006*464 xbl.img
22 File(s) 4*032*188*416 bytes
I am almost in the same situation, maybe yours is easier, dependes on the details we don't know exactly, but this Qualcomm Com port is the last resort. I trouble when I did flash everything when I dumped/extracted the firmware, maybe the software-hack-tools I used where not perfect, Or me dum for flashing every img and
Now my fastboot don't work with a black dead phone. I working it out. And will share the solution by time.
kurdi9132 said:
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
Click to expand...
Click to collapse
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Shabbirkt said:
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Click to expand...
Click to collapse
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Dr.Csoo said:
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Click to expand...
Click to collapse
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Shabbirkt said:
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Click to expand...
Click to collapse
Do you know if they can or not notice if device was hard bricked by software mistakes?
@kurdi9132
Plug your phone to your computer via. USB, and leave it for 15-16mins, you should hear a notification sound, then check Device Manager to see if Qualcomm 9008 comes up.
Please let us know!
well... doing some stuff with t-virus and my curiosity led to situation like what is mentioned here. everything was fine untill I pressed reboot>edl from recovery. Phone went down and went down deep!
PC makes sound when I connect the phone. but nothing more than that.
Device manager shows HS-USB Diagnostics 9008.
It looks like that the phone does not even charge. I cant feel any warming while connected to power adapter.
So...?
Hello friends!! I have my phone in hard brick. It all started when I unlocked the bootloader by Motorola code. The fastboot process ended well, but I made a mistake. When the process finished remove the usb cable before the phone was restarted, but I did not write "fastboot reboot". Now it does not recognize the phone via usb and only the led light blinks. So, I have seen that it can be restarted via sd memory, but I don't get the mmcblk0.img for the xt 1800 Sanders model. Any other solution? Thank you very much and greetings from Argentina!
lokochris said:
Hello friends!! I have my phone in hard brick. It all started when I unlocked the bootloader by Motorola code. The fastboot process ended well, but I made a mistake. When the process finished remove the usb cable before the phone was restarted, but I did not write "fastboot reboot". Now it does not recognize the phone via usb and only the led light blinks. So, I have seen that it can be restarted via sd memory, but I don't get the mmcblk0.img for the xt 1800 Sanders model. Any other solution? Thank you very much and greetings from Argentina!
Click to expand...
Click to collapse
Sure brother
1st thing if u remove cable without fastboot reboot cmd
Then this is not the reason of bricking ur device
U manually rebooted ur device
2nd thing u can recover ur device
Just follow the thread i am dropping the link below
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165
Reply if u have any doubt
Wadu192 said:
Sure brother
1st thing if u remove cable without fastboot reboot cmd
Then this is not the reason of bricking ur device
U manually rebooted ur device
2nd thing u can recover ur device
Just follow the thread i am dropping the link below
https://forum.xda-developers.com/moto-g5s-plus/how-to/batch-scripts-sanders-unbrick-flash-t3895165
Reply if u have any doubt
Click to expand...
Click to collapse
thanks for answering. The problem that I have that the PC does not recognize the cell phone via usb, I cannot even enter the booloader using the power + volume buttons -. Now if I disconnect the battery, it connects and disconnects constantly, but does not recognize it