I want to use the kernel from Luis's ROM to a different ROM but whenever I flash his kernel's boot image on another ROMs it always boots to the fastboot mode
I don't know but I get the best charging speed with his ROM
I just want that with other ROMs too
Can anyone help me with that?
Its means that rom doesn't supports that kernel.
So no
You cant use that kernel.
---------- Post added at 09:57 AM ---------- Previous post was at 09:57 AM ----------
amanu247 said:
I want to use the kernel from Luis's ROM to a different ROM but whenever I flash his kernel's boot image on another ROMs it always boots to the fastboot mode
I don't know but I get the best charging speed with his ROM
I just want that with other ROMs too
Can anyone help me with that?
Click to expand...
Click to collapse
Use dark phoenix or rockstar kernel for good charging speed.
Installing Rockstar on Evolution X takes me to the safe mode everytime I reboot
So yeah that doesn't help
I don't know why is that happening but whenever I flash rockstar or twister and reboot then it always takes me to the safe mode
Related
Hi there
Rooted my I9000 today and sorted out the 3e problem and installed CWM recovery. All problems averted thus far. Installed CM9, got to the start up screen and it said it needed a reboot. Since i clicked restart its been bootlooping.
I can't get it into recovery mode but i can get it in to download mode. Can anyone tell me (as i'm a massive noob) what i need to do to fix this simply?
Thoughts? Help?
Try to pull out battery for a few secand..insert back n enter recovery mode using 3 button combo..reflash cm9 rom n try to reboot..if happen again..revert back to stock rom..
---------- Post added at 04:02 PM ---------- Previous post was at 03:58 PM ----------
If u are 1st time flash to ics..it need to flash twice..first for flash ics recovery and second for flash ics rom..
Flash a ginger custom(with cwm) kernel through ODIN and reflash cm9 twice.
zodiaxe66 said:
Flash a ginger custom(with cwm) kernel through ODIN and reflash cm9 twice.
Click to expand...
Click to collapse
Could you direct me a ginger custom rom? sorry, i'm pretty useless
I can't get into recoverymode, only download mode...but odin doesn't seem to detect the phone in download mode....thoughts?
managed to get it back on
thanks for all the help lads!
Phone : Xperia x8
The flashed kernel: http://forum.xda-developers.com/showthread.php?t=2136211
So after unlocking bootloader, i flashed that kernel.
I restarted phone and now "nAa Kernel" logo comes up, and i'm stuck there. My phone won't boot longer.
At bottom it says " CWM-based Recovery v6.0.2.8"
My phone won't connect to my computer either...
So what can i do? I tried to go into recovery but didn't work
Nothing happens when i press the back button...
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
8cpaiw said:
Dude...this is your 3rd thread about this problem....
Use flashtool.....HOW?!
1.Turn off your phone
2.Open flashtool and select STOCK KERNEL to flash
3.FLASH
Tada...you are done...let me make a video tutorial for you
Click to expand...
Click to collapse
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
8cpaiw said:
i am going to upload it in 30 minutes
---------- Post added at 11:35 PM ---------- Previous post was at 11:34 PM ----------
download from internet
Click to expand...
Click to collapse
Can't find stock kernel for xperia x8, searched on several places..
Daazion said:
Where do i find the stock kernel..?
And to turn off my phone, i have to pull out the battery....
And when i insert the battery, phone boots automatically -.-
Click to expand...
Click to collapse
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
@op
Why the hell you made 2 threads of same topic :banghead:
Sent from my X8
8cpaiw said:
Pull out battery and return it after 5 secs......after that GO IN FLASHMODE BEFORE PHONE STARTS!!!!
STOCK ROM and KERNEL
are flashed together
My internet is laggy now so search stock rom & kernel .ftf file in Gogeta's signature(Show content)
I need to make you a tutorial
Click to expand...
Click to collapse
FINALLY! Now my phone works... Was first time using flashtool, you got me hella knowledge outta this! Tyvm! :good:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
8cpaiw said:
I am glad that it helped....it would be nice to press the thanks button if i helped
---------- Post added at 09:48 AM ---------- Previous post was at 09:25 AM ----------
Now root phone,unlock bootloader....put custom ROM that requires nAa-005-jb kernel and put it on your SD card......flash nAa-005-jb kernel......go in recovery and install your rom....that is it
Click to expand...
Click to collapse
So first root phone, then unlock bootloader, then Put custom room, like mincm10? Then i flash the kernel?
I need to install recovery or something?
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
8cpaiw said:
go back to STOCK ROM & KERNEL.......just flash STOCK ROM(and stock kernel will be flashed with stock rom)
root phone then check is bootlaoder unlocked
**nAa-005-jb kernel is used to run JellyBean rom
IF BOOTLOADER IS LOCKED then UNLOCK IT and do 1st step
||
\ /
1. if BOOTLOADER IS UNLOCKEDthen put your rom on sd card(need to put Jellybean rom that requires nAa-005-jb kernel in order to run) and then turn off your phone and flash nAa-005-jb kernel form recovery install rom
2. turn on phone and enter recovery(by clicking BACK button when you see the circle and nAa inside)
Click to expand...
Click to collapse
Tyvm! I used this rom http://forum.xda-developers.com/showthread.php?t=1836116
Phone is working now, and it looks hella better! :victory:
Press THANKS button if i helped.....Finally it's working yeey
I recently got an S3 Mini and I wanted to install cyanogenmod on it. I have experience because I have cyanogenmod on my S4 and TWRP custom recovery.
After I use Odin to flash the TWRP custom recovery to the phone, whenever I try to boot into recovery the screen just freezes and these lines and green film start to appear on the screen.
I have uploaded the picture of the phone trying to boot into recovery
Can someone please help me?
Thanks
McMahonus4 said:
I recently got an S3 Mini and I wanted to install cyanogenmod on it. I have experience because I have cyanogenmod on my S4 and TWRP custom recovery.
After I use Odin to flash the TWRP custom recovery to the phone, whenever I try to boot into recovery the screen just freezes and these lines and green film start to appear on the screen.
I have uploaded the picture of the phone trying to boot into recovery
Can someone please help me?
Thanks
Click to expand...
Click to collapse
Did you flashed TWRP from maclaw?
---------- Post added at 08:19 PM ---------- Previous post was at 07:57 PM ----------
Which model is this phone, it's not a GT-I8910 right?
Clostry said:
Did you flashed TWRP from maclaw?
---------- Post added at 08:19 PM ---------- Previous post was at 07:57 PM ----------
Which model is this phone, it's not a GT-I8910 right?
Click to expand...
Click to collapse
you're right, it can't be a I8190. Look at where the camera is (right top side). On the original it's on the left top side
koragg97 said:
you're right, it can't be a I8190. Look at where the camera is (right top side). On the original it's on the left top side
Click to expand...
Click to collapse
The photo is not clear but the camera seems where it should be to me
Just telus is a canadian company, this made me think it could be a sm-g730...
Clostry said:
The photo is not clear but the camera seems where it should be to me
Just telus is a canadian company, this made me think it could be a sm-g730...
Click to expand...
Click to collapse
There's literalyl 390248230948023948 variants of the S3 mini, fairly certain it is the SM-G730 confirm it on the model or in settings. Maclaw's recovery or any other recovery is not compatible with your phone, and as far as I know your phone does not have a recovery yet hence why it bootloops. You need to revert back to stock: forum.xda-developers.com/attachment.php?attachmentid=2530506&d=1390328847 and all shall be well. There's no active development on your phone as far as I know but do give this thread a visit: http://forum.xda-developers.com/showthread.php?t=2469413&page=11
So can it be that I'm flashing the wrong twrp file? Because I'm flashing the wrong region?? Any suggestions on how to fix this issue and get it working?
McMahonus4 said:
So can it be that I'm flashing the wrong twrp file? Because I'm flashing the wrong region?? Any suggestions on how to fix this issue and get it working?
Click to expand...
Click to collapse
It's because there is no TWRP for your device, there are no TWRP or CWM builds for the TELUS S3 MINI the ATT&T S3 MINI and the VERIZON S3 MINI.(as far as I know) Only solution is to compile it yourself, and that's quite involved but there are numerous guides out there.
I see.... Thanks anyways, I may try to compile my own, if I do get it working I will upload it here
McMahonus4 said:
I see.... Thanks anyways, I may try to compile my own, if I do get it working I will upload it here
Click to expand...
Click to collapse
http://xda-university.com/as-a-developer/porting-clockworkmod-recovery-to-a-new-device
http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
TWRP is easier to compile after you got a working CWM recovery, as you only need to add in a couple of TWRP flags.
You need to run ubuntu natively or through virtual machine (VMWare, etc) and download the CM source code which may take a while depending on your internet speed (it's quite large about 15gb i think or so )
The same thing happened to me when I tried to install CWM for my s3 mini sm-g730w8( this is the Canadian version for telus) Boot into download mode (VOL DOWN+HOME+POWER) then just choose reboot device and it should be okay. If it still doesn't work then boot into download mode and then flash the stock rom via odin. Also regarding the custom recovery for our phone, even if you did port a working custom recovery the works for our phone, you won't be able to install it because our bootloader is locked; which is also why your screen turned green after trying to boot into your custom recovery. I found 2 possible solutions for flashing scripts and mods: kn0x0ut Toolbox http://forum.xda-developers.com/showthread.php?t=2550120 and Flash Gordon http://forum.xda-developers.com/showthread.php?t=2250555 I haven't been able to try them yet but I think kn0x0ut toolbox is more reliable. I hope this helped
Hello People of XDA..
I am unable to flash any rom to my note 5..
Device: Samsung Galaxy Note 5 SM-N920T (T-Mobile)
Status:
TWRP Flashed and Working
Download Mode Working.
Detected by Odin3_v3.10.7
It was rooted before i wiped everything.
( I had some problem in the display and after reading online I thought of flashing a custom ROM hoping that might solve problem. I suddenly got a green line in my display.. someone suggested it could be a software issue.. and some googling showed it occured in some samsung devices... so i thought of wiping off everything and trying a custom rom...)
I Wiped:
Dalvik/ART Cache
System
Data
Internal Storage
Cache
Then it restarted and stuck on the Samsung Logo..
Then Tried to Install This ROM: Hyperdrive RLS5
Step by Step as advised in the forum.
but it stucks at the Black Screen after Samsung Logo..
Then I Tried This T-Mobile Galaxy Note 5 SM-N920T to Stock 5.1.1 Lollipop Firmware using Odin3_v3.10.7 but it Fails
Odin3 Screenshot http://i.imgur.com/7efYkPl.png
Please Tell me any Rom which can work ....I just need to fix this phone with any Rom..
Is there any kernal missing or something? i am unable to understand about kernals...
I bought this phone for aboutt 475 USD with hard earned money, used only a week i really feel depressed please if anyone could help me solve this problem... Thanks in Advance..
Download stock firmware from Sammobile flash it via Odin
---------- Post added at 03:09 AM ---------- Previous post was at 03:02 AM ----------
Try flashing marshmallow firmware and see if pass and never wipe internal storage
---------- Post added at 03:14 AM ---------- Previous post was at 03:09 AM ----------
https://www.androidfilehost.com/?fid=24651442761498722
Try this rom
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
Flash rom go through aroma settings then click finish but don't reboot flash this kernel http://arter97.com/browse/exynos7420/kernel/21.1/n920tw8/arter97-kernel-n920tw8-21.1.zip and boot
Zenngn said:
Download stock firmware from Sammobile flash it via Odin
Try flashing marshmallow firmware and see if pass and never wipe internal storage
Try this rom
Flash rom go through aroma settings then click finish but don't reboot flash this kernel
Click to expand...
Click to collapse
Okay Bro I Try All of this and let you know
[/COLOR]Flash rom go through aroma settings then click finish but don't reboot flash this kernel arter97 . com/browse/ exynos7420/ kernel/ 21.1/ n920tw8/ arter97-kernel- n920tw8- 21.1. zip .......... and boot
Click to expand...
Click to collapse
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
empowercb said:
Can anyone help me with this part of the solution dont reboot and flash kernal...
after flashing SICK AS HELL ROM Am I suppose "not" to reboot from TWRP and go back and copy arter97 kernal in my phone and flash it and then reboot?
_______________________________________
One more then ... when i flashed the Hyperdrive Rom... I remember reading .. "there was no kernal found or something" in the end of installation.... is that is what is causing problem?
Click to expand...
Click to collapse
Yup, there was no kernel installed with your rom and you erupted the old one...flash stock modified, arter 21, or latest available skyhigh kernel and you'll boot...OR find a custom rom pkg that includes a kernel...
Sent from my SM-N920T using Tapatalk
I tried flashing stock rom in my lenovo A7000a with lollipop version via SP Flash tool but it stuck in bootloop. Then i installed twrp recovery and root it and flash a custom rom "Androim 7" by thinking that it will solve my problem but it didn't. It still get stuck in bootloop. When it get first boot up in custom rom, for first time bootanimation get change a littel and then it get stuck again and every time i flash stock rom or custom rom it get stuck at bootanimation.
Did u enable da/dl with all checksum in spft?if not u must reflash it again with stock rom after enabling them in spft thats it ????????.???? :highfive:
Hit thanks if i helped
Yes, I have checked da dl all checksum in option->download
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
aswinp222 said:
Then possible it maybe the problem with the stock rom/scatter that u used.try downloading another stock rom with its scatter.it may help
Click to expand...
Click to collapse
I did try it by download another stock rom from *Flashing Stock Rom Via SP Flash Tool[Lenovo A7000] by*PrashantRana
But it gets into bootloop.
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
aswinp222 said:
If bootanimation appears,dont worry just wait for long time.try rebooting with battery replacement etc:both stock and androium takes a hell lot of time to boot for first time.or else you may try flashing CM roms or the nexus MM minimal ported by myself.the wont take much time to boot up :cheers
Click to expand...
Click to collapse
I did as you said above and i downloaded cm13 and istalled it but it didnt work. I have uploaded a video see it. For first time i installed cm13 it goes to cm13 boot animation but in another boot it didnt go to cm13 boot animation. I have provided a video. Have a look.
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
aswinp222 said:
In fact your phone is a7000a or is it a7000 plus?
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
Which are the fields that you wiped before flashing the rom?
---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ----------
In spft which option did u chose?download only/firmware upgrade/format all???
Click to expand...
Click to collapse
Both are same. A7000a is the model number and Lenovo A7000 Plus is official name of the Device.
I have tried two methods.
1st Method.
First I flash stock rom then I wipe data/cache/dalvik-cache.
2nd Method
I did same as above in this method but I wipe data/system/cache/dalvik-cache.
I have tried two method
1. Dowload only
2. Firware Upgrade
Third method format all didnt didnt work.
It shows some error.
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
aswinp222 said:
A7000 and a7000plus are not the same.they got different architecture and kernel.a7000 got a 1.5ghz cpu whereas a7000plus got 1.5ghz,resembling to k3note.make sure you flash the proper firmware.choose firmware upgrade in spft.also i recomment flashing recovery only after first boot.if bootanimation appears it is likely to boot.
Click to expand...
Click to collapse
Heyy, i got boot up but It again gets reboot and and then its goes to loop. I think the problem is in Cpu Governer. So is there a way to fix cpu frequency?
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
aswinp222 said:
just ttry flashing daredevil kernel.it got some patches for the same i hope.but i dont think that it helps.give out a try though.
Click to expand...
Click to collapse
But the kernel is for marshmallow and my phone has lollipop
Does it wok with Cm13