It's been a week since i've some problem while i talk driving my car. When i try to speak other people can't hear me.
I did't change the cable so i can't figured out why i talked without putting speakerphone for months and now i need to turn it on. The problem is that also the audio output is being redirect to internal phone speakers.
I think this is some sort of hardware problem.
I need to redirect the audio input to speakerphone but i need to keep the output from the car so i can better hear the conversations .
Please help me.
Related
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
Hi,
I have the official car dock plugged in my car stereo, and the audio output works great for music, and for navigation (using Google car home).
But whenever I make or take a call, the audio goes back to the phone speaker, which is very annoying, I can't hear anything at high speed.
Any idea for a fix?
Bumping this thread because I have the exact same problem and was hoping that someone in the know might see it.
I believe that this can be resolved in the kernel, so does anyone perhaps know of a custom kernel that has this feature working as we'd like?
StNickZA said:
Bumping this thread because I have the exact same problem and was hoping that someone in the know might see it.
I believe that this can be resolved in the kernel, so does anyone perhaps know of a custom kernel that has this feature working as we'd like?
Click to expand...
Click to collapse
Another bump. If I plug the audio out cable directly into the phone's headphone jack, it works fine, audio quality is great, no problems with echo'ing. Very frustrating that in dock mode, calls can't go through the stereo.
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.
Hi guys and gals,
I have tried searching Google and on here, but I can't seem to find another person with this problem.
The issue I have is: when my S6 is Bluetooth-paired to my car (2014 Passat S/TSI), audio for notifications/charging/directions initially plays through the speakerphone for ~half-second, then switches to my car speakers. This results in a weird sounding echo for the first second of the sound. Whatever it is, it does not seem to affect music playing, and it does not matter if music is continually playing or the phone is silent.
I never had this problem with my GS2 or my HTC One M7. I was wondering if others had this problem or know some things to try and fix it?
I've already reset the phone and reset the Bluetooth connections car- and phone-side.
@jeebuz. There are a lot of Bluetooth problems with this phone and cars right now. I have a weird issue with audio books, the volume goes up and down. I haven't tried to make calls on bluetooth though. One guy has a long post in the "Dropped Calls" thread you should read.
I've recently purchased a lovely headset from XiaoMi for my Huawei P20Pro.
It's Mi ANC & Type C In-Ear Earphones. Model: JZEJ01JY.
It has lovely audio and works fine with most of the features except...
When I made calls, the headphone will not hear any sound at all. no dial tone, not even when someone picked up the phone on the other end.
I noticed a quick fix for this error is to turn on the handsfree mode when you made the call; after you hear the sound from the handsfree mode, turn off the hands-free, then the sound will start coming in through the headset.
Another option is to wait until you hear the dial tone then only plugged in the headset.
It is not quite ideal considering the hassle of having to do so.
The error was so niched that I could not find generic help online at the moment.
Anyone shares the same pain or could provide some help here? Thanks!
Sounds like a compatibility issue. Use the stock earphones and check of the problem also persists.
Same problem with stock headset
Hi, same issue with the original headset that came with the P20 phone. Same clumsy solution. Have you solved it?...