Related
I've recently bought the new vw golf with the android auto function. I've updated my galaxy note 3 to the latest lollipop 5.0 UK version so i can use AA.
The phones initial connection is fine. Open the AA app, connect USB to car, car recognises the phone via AA. Phone changes connection type to USB instead of Media. AA app then prompts a few questions (as its new connection to the car) and then AA is good to go on the car screen.
All is well until the next time i hop into the car and connect the USB to the phone. you would a expect that as my phone made an initial connection, the car should be able to pick it up and AA will then load up. However the car display will keep going into a loop where it tries to read my phone but connection keeps failing. likewise for my phone it will keep shifting between connection as media and connection as USB (which is the connection type for AA). AA wouldn't load at all on my phone. i go into the app and tried connecting again but the app will just quit by itself. i've tried USB debugging, no luck. i'm using the samsung original USB cable so didn't think there would be issue here.
the funny thing is that i figured that in order to get AA to connect successfully is to go into the app and go to the settings to forget the car that i initially had it connected to. so next time i plug in the usb and go into the app, it will start the new connection prompts and voila it will work again. but next time i plug in the phone it will just go back to the connection loop and won't be able to trigger AA to load on the phone.
there was only one time that the phone managed to connect to the car and load AA without the need to forget car and connect as new. its very hit and miss and i'm not sure whether this is a bug in the app or the car's.
anyone else having similar connection issues?
AA is buggy but I'd have to say......
rafalucas said:
I've recently bought the new vw golf with the android auto function. I've updated my galaxy note 3 to the latest lollipop 5.0 UK version so i can use AA.
The phones initial connection is fine. Open the AA app, connect USB to car, car recognises the phone via AA. Phone changes connection type to USB instead of Media. AA app then prompts a few questions (as its new connection to the car) and then AA is good to go on the car screen.
All is well until the next time i hop into the car and connect the USB to the phone. you would a expect that as my phone made an initial connection, the car should be able to pick it up and AA will then load up. However the car display will keep going into a loop where it tries to read my phone but connection keeps failing. likewise for my phone it will keep shifting between connection as media and connection as USB (which is the connection type for AA). AA wouldn't load at all on my phone. i go into the app and tried connecting again but the app will just quit by itself. i've tried USB debugging, no luck. i'm using the samsung original USB cable so didn't think there would be issue here.
the funny thing is that i figured that in order to get AA to connect successfully is to go into the app and go to the settings to forget the car that i initially had it connected to. so next time i plug in the usb and go into the app, it will start the new connection prompts and voila it will work again. but next time i plug in the phone it will just go back to the connection loop and won't be able to trigger AA to load on the phone.
there was only one time that the phone managed to connect to the car and load AA without the need to forget car and connect as new. its very hit and miss and i'm not sure whether this is a bug in the app or the car's.
anyone else having similar connection issues?
Click to expand...
Click to collapse
I think this is your radio hardware and not the AA app. But you never really disclosed what phone you are using and if it has been modified or what so there is no clear help answer that I can assist you with.
hi, i've got the Note 3 (SM-N9005) running stock lollipop 5.0 (baseband N9005XXUGBOI2). my phone was previously running 4.4.2 kitkat with root.
the connection is very hit and miss. it will keep trying to read my phone when plugged to the car and the phone will keep shifting between "connected as a media device" or "connected as a USB accessory". When its connected as usb accessory, the phone screen will black out for a second and then goes back into the previous screen which is usually home page of the launcher. i think the "blackout" might be the phone trying to boot or load android auto app but gets disconnected as it tries to get in.
i have to plug the usb in and out a few times and sometimes by lottery, it will establish a successful connection and AA loads on the car screen. i've found that if i open the app first on the phone and then plug in the usb, it will have higher chance of getting a successful handshake.
hope this makes sense.
I have the exact same issue: VW App-Connect in a new 2016 vehicle with a Galaxy S5 running Lollipop. Very annoying because once the two are connected it does work reasonably well.
rafalucas said:
I've recently bought the new vw golf with the android auto function. I've updated my galaxy note 3 to the latest lollipop 5.0 UK version so i can use AA.
The phones initial connection is fine. Open the AA app, connect USB to car, car recognises the phone via AA. Phone changes connection type to USB instead of Media. AA app then prompts a few questions (as its new connection to the car) and then AA is good to go on the car screen.
All is well until the next time i hop into the car and connect the USB to the phone. you would a expect that as my phone made an initial connection, the car should be able to pick it up and AA will then load up. However the car display will keep going into a loop where it tries to read my phone but connection keeps failing. likewise for my phone it will keep shifting between connection as media and connection as USB (which is the connection type for AA). AA wouldn't load at all on my phone. i go into the app and tried connecting again but the app will just quit by itself. i've tried USB debugging, no luck. i'm using the samsung original USB cable so didn't think there would be issue here.
the funny thing is that i figured that in order to get AA to connect successfully is to go into the app and go to the settings to forget the car that i initially had it connected to. so next time i plug in the usb and go into the app, it will start the new connection prompts and voila it will work again. but next time i plug in the phone it will just go back to the connection loop and won't be able to trigger AA to load on the phone.
there was only one time that the phone managed to connect to the car and load AA without the need to forget car and connect as new. its very hit and miss and i'm not sure whether this is a bug in the app or the car's.
anyone else having similar connection issues?
Click to expand...
Click to collapse
I believe Verizon phones were having USB connection issues because of some special app they had that did stuff over USB, and an update fixed it.
Some USB connection issues can be solved by changing the mode of USB: MTP, Charge Only, etc.
Some issues can be worked around by enabling (or disabling) USB debugging. This is under Developer settings after Dev mode is entered by tapping Build number 7 times.
Hi Mike, I've got an Australian stock unbranded note 3.
i've spoken to the vw dealer and apparently vw is working diligently for a software upgrade to the car's infotainment system which may or may not fix the connectivity issue.
it's just frustrating that in order to get a consistent connection, i have to go into the app and "forget" the car, then it will go through the new connection prompts.
i'm hoping the next app update might fix the issue but at the moment its unclear whether its the app, or my phone or the car's problem.
I have similar issues with my 2016 Skoda Fabia Combi. I'm guessing the infotainment system in the Skoda is pretty much the same as in the Volkswagen. Many parts are because Skoda is owned by VW. After tons of trial and error, I've had some success connecting my LG G3 but first let me tell you how I ended up in the current situation.
I have tried to connect thee different android devices (LG G3, HTC One M7 and Nexus 7 tablet all running Lollipop) with bunch of different USB cables. The result is always the same. On the phone I see black screen flashing before it returns to home screen and nothing else happens. From the recent apps view I can see that the black screen was AA trying to launch. CarPlay with iPhone works fine.
I live in Finland so I have sideloaded the AA app and at first I thought that the issue is caused by AA not being officially available here yet. After searching this forum and other android forums I found out that other people are having the same issues in countries where AA is supported so maybe this is not the case. Obviously it's not also a device problem because I get exactly same results with different devices from different manufacturers. Only common nominator seems to be the VW/Skoda infotainment system? Correct me if I'm wrong here..
In the Skoda smartlink menu you can choose your preferred connection protocol from Android Auto and Mirrorlink. This affects the order the car attempts to establish the connection. I read from a Skoda forum that someone had a successful connection after he had changed these options around so I tried it. I checked Mirrorlink as a preferred method and tried the connection: no luck. I changed back to AA as preferred method and to my amazement after this the AA launched on the phone and I had a successful connection! If the VW has similar option I suggest you VW guys also try this.
My current situation is that most of the time the phone does not connect at first try but after changing the preferred method around it does. I have also other issues with AA. After connecting I cannot adjust the volume first from steering wheel/stereo volume knob. Spotify audio goes to a wrong channel at first (I can hear it only when i activate voice command) After changing music app to Google Play Music and then back to Spotify it starts working normally and I can also adjust volume. And of course the restriction on browsing your Spotify library. It is the most stupid thing I've ever seen at that level of software development.
rafalucas said:
Hi Mike, I've got an Australian stock unbranded note 3.
i've spoken to the vw dealer and apparently vw is working diligently for a software upgrade to the car's infotainment system which may or may not fix the connectivity issue.
it's just frustrating that in order to get a consistent connection, i have to go into the app and "forget" the car, then it will go through the new connection prompts.
i'm hoping the next app update might fix the issue but at the moment its unclear whether its the app, or my phone or the car's problem.
Click to expand...
Click to collapse
Auto dealers tend to know almost nothing about software and smartphones. They know how to sell cars, and the mechanics tend to know how to fix them mechanically, more or less.
And they can almost always say that there is likely an update due at some point.
If you, or anyone having a problem on the car/HU side, has a USB OTG cable and a bit of time to test, you should consider trying my Headunit app; see my sig.
If you get it working you can get a better idea if your car HU is at fault.
I wonder if there are car stereo shops where you can plug your phone into a Pioneer AA unit, like 4100NEX, and see if it works OK on that.
I've had my 2015 Seat Leon (also VW group) for four months now and also having trouble with Android Auto through the SEAT 'Full Link' connection. It seems to be russian roulette whether it'll make a connection and start AA when you plug it in. Sometimes you'll get a 'Connection failed' message, other times you will see the system try AA, fail, then try MirrorLink then fail on that too (as my Nexus 5 doesn't support MirrorLink). As others have said you see the phone screen go black then crash out and goes back to the home screen.
The only solution I have is to restart my phone and try again. Its almost my routine now to restart my phone just before I know I'm about to go for a drive. It beats having to sit in the car watching my phone reboot before I set off!
I didn't know you can change the USB settings on the phone, so I'm going to go through the various settings in developer options to see if any of these help. I'm thinking 'Charge only' might be useful, unless AA needs MTP or network connection to operate?
seems like i'm not the only one! sounds to me its more and more likely to do with the vw made headunit (could be the firmware). I just tried a mate's phone with the AA app but it also went in a connection loop before finally establishing a handshake with the phone. hopefully next firmware update to the car's headunit may be able to fix but but i won't bet on that happening anytime soon.
guess everyone has to trial and error and find ways to establish a successful consistent connection. for me is to forget the car and establish a new connection to the car.
still frustrating as ever and i don't want to have to spend 2 - 3 mins each time before i drive to wait for AA to load.
anyone else having connection issues with other car makes?
rafalucas said:
anyone else having connection issues with other car makes?
Click to expand...
Click to collapse
With my Pioneer or my Headunit app, one of the biggest issues is quality of the USB cable and USB connections.
Testing with different/known high quality cables is worthwhile.
nimdy said:
'Charge only' might be useful, unless AA needs MTP or network connection to operate?
Click to expand...
Click to collapse
"Charge Only" is what I try to aim for. Despite it's name apps like Android Auto can use the USB in this state.
AA does not need or use MTP or network connections via USB. Trying to use USB for other things, like network connection, would only be possible via a USB hub, but it's a crap-shoot whether that would even work.
mikereidis said:
With my Pioneer or my Headunit app, one of the biggest issues is quality of the USB cable and USB connections.
Testing with different/known high quality cables is worthwhile.
Click to expand...
Click to collapse
i've tried various cables but i find the original samsung cable that came with the phone the most "consistent" in establishing a successful connection.
mikereidis said:
"Charge Only" is what I try to aim for. Despite it's name apps like Android Auto can use the USB in this state.
AA does not need or use MTP or network connections via USB. Trying to use USB for other things, like network connection, would only be possible via a USB hub, but it's a crap-shoot whether that would even work.
Click to expand...
Click to collapse
i'll give this a go tonight
PHEW. I thought maybe it was just me. I have just purchased a Skoda Fabia 2016 with Android Auto (I imagine this will be the same underlying system for VW/Skoda/Seat/Audi). I find that sometimes, I plug it in and then it magically works fine. Other times it can't connect to the device and tries to connect to MirrorLink instead....which also fails. I'm using a Samsung Note 3 official UK lollipop build - but rooted. When it fails, I have to go through the process of telling it that I want to connect to the device.
Incidentally when it has connected, it's rock solid every time (well with one random crash & reboot of the car's entertainment system).
It's just annoying. I want to get in my car, plug it in, AA to launch and that's it!
What's also slightly annoying is that there's no button to go right to AA on the dash. I have to go to 'Menu' and find Android Auto in that menu to launch back into it if I go to something else within the car's entertainment system. Grr! Not anything anyone can do on here, but just venting!
jonboyuk said:
PHEW. I thought maybe it was just me. I have just purchased a Skoda Fabia 2016 with Android Auto (I imagine this will be the same underlying system for VW/Skoda/Seat/Audi). I find that sometimes, I plug it in and then it magically works fine. Other times it can't connect to the device and tries to connect to MirrorLink instead....which also fails. I'm using a Samsung Note 3 official UK lollipop build - but rooted. When it fails, I have to go through the process of telling it that I want to connect to the device.
Incidentally when it has connected, it's rock solid every time (well with one random crash & reboot of the car's entertainment system).
It's just annoying. I want to get in my car, plug it in, AA to launch and that's it!
What's also slightly annoying is that there's no button to go right to AA on the dash. I have to go to 'Menu' and find Android Auto in that menu to launch back into it if I go to something else within the car's entertainment system. Grr! Not anything anyone can do on here, but just venting!
Click to expand...
Click to collapse
Galaxy s6 Stock firmware and my octavia android auto 1.4 work very well.
No luck with LG G3
Good day everyone, I just purchased a 2016 VW GTI and I have an LG G3 with Lollipop 5.01 rooted. and I can not get it to work with mirrorlink or android auto. Mirror link default or AA default. I tried different cables, plugged in car on before the car was on. MTP, PPP, charge. The head unit does see it as an LG phone but nothing works.. usb debugging on or off.. Kind of bums me out. Oh I keep getting a make sure the phone is unlocked message I turned screen lock off, and the phone is awake when I try to connect.
mikereidis said:
If you, or anyone having a problem on the car/HU side, has a USB OTG cable and a bit of time to test, you should consider trying my Headunit app; see my sig.
Click to expand...
Click to collapse
Yes! This is the best option for check if the problem is the HU/car or the phone.
From my point of view typically the most issues are related to the phone (ROM, AA app, etc.). For example, with my previous Lollipop 5.0 one month ago... the AA was inestable. With a new 5.1 phone and with the last AA app version (upgraded 1 week ago) I don't have any problem.
Please, try this before post about problems. Sometimes the problems isn't the car or the Head Unit. :angel:
Hi all. Further to my last post, I'm also sure it is a device/ROM issue. It doesn't work all the time, but most of the time the workaround for me is to open the open apps list, swipe them all off to close them, including AA app, then re-open AA. This increases the chances of my phone connecting to the car, but every so often I get a connection error and have to try again a second/third time.
I think I may have asked before, but is there anywhere we can report these bugs to? AA is technically beta (as with most Google products) so I'm sure they would welcome our bug reports.
Connection Memory ?
Hi,
I have the same experience as many others that the connection to AA is very random. I've tried:
Different phones (Nexus 5 and Nexus 6 on stock Android 6.0)
Different USB cables
AA app on and off
Screen locked and unlocked
All without being able to see a pattern. Sometimes it connects automatically in 15 seconds, sometimes automatically in 1 minute and sometimes I need to manually push the connect on the HUD (VW Passat 2106).
The only thing that is consistent is that once you are connected to AA and then disconnect, if you re-connect the phone it works flawless every time ! It seems to be working even if the re-connect happens after a few minute (e.g. not rigth away). So it seems that either the HUD or the phone has some sort of connection memory. Once it expires the connection problem reappears.
Anyone else that can confirm this ? Any ideas on where the problem can be ? I guess this rules out the USB cabel as suggested by many.
// J
Mine arrived yesterday, so I have not had much time to "play". But here are my first impressions and the issues I have found.
First impressions (coming from an LG G3).
It is super fast. I really like that.
The phone signal strenght seems better. So, either they "lie" on the display or the antenna is better.
No bloat - nice.
I got the 128Gb one. Loads of free memory and storage. I like that.
Screen is OK.
It came with dual sim slots which I didn't know - I can now use both sims in one phone.
Now, issues:
It won't connect to my PC. I get a "USB device not recognised" error. Spent ages chatting with their techie and I need to put it into USB debug mode and the load an ADB driver which they could not provide. How STUPID is that.
The capacitive button lights are so dim as to be unusable and only come on as you press on the spot. What is the point of that?
Bluetooth won't connect to my headset (MPows) unless I put it into APTX mode.
Bluetooth connects to my car for phone, but while it tries to play audio, there is nothing there. I have loaded some music and it plays OK using VLC. Maybe the music is in the wrong place but I have no idea how to check.
If anyone has any idea on my first issue, I would be grateful for some help.
Alan
alan sh said:
Now, issues:
It won't connect to my PC. I get a "USB device not recognised" error. Spent ages chatting with their techie and I need to put it into USB debug mode and the load an ADB driver which they could not provide. How STUPID is that.
Click to expand...
Click to collapse
I had this issue, it would appear to fairly common. What worked for me was the following.
1) Disconnect your phone and restart windows. (Restarting windows was necessary for me as attempting to connect the phone and it failing caused something that was only cleared by a reboot).
2) Enable developer options and on the phone and select USB debugging mode.
3) While you are in developer change Select USB Configuration to MTP (Media Transfer Protocol).
4) Check step 3) actually stuck. It takes a few goes for me and others for some reason.
5) Connect it to your PC
6) Hopefully it will mount as a drive called Oneplus Drivers or something similar (can't remember the exact name). In this driver is a setup up for the USB driver installation. Run it as admin and install.
7) If that all worked you should now have the mounted drive described above and your Oneplus 5 as a separate mounted MTP device in explorer which you can access the internal storage from.
For me, I can't disconnect and reconnect without rebooting windows and repeating steps 3,4 & 5 above. There is clearly either a bug in Oxygen or a driver issue that needs resolving but hopefully this will work for now. For info, with the phone connected my PC won't shut down. It does boot to the login screen but won't actually show the login prompts! Weird.
Thnks Chris. At the moment, I can't get MTP mode to "Stick". I'll keep trying. I may have also found some ADB drivers (on my laptop which is not near me at the moment).
Alan
One more issue - playing music over bluetooth, it occasionally "stutters" and I hear what appears to be a very small gap in the music - about 1/10th second - but noticeable. Has anyone seen (heard) this?
Alan
alan sh said:
One more issue - playing music over bluetooth, it occasionally "stutters" and I hear what appears to be a very small gap in the music - about 1/10th second - but noticeable. Has anyone seen (heard) this?
Alan
Click to expand...
Click to collapse
I have had this with a previous phone, not this one. What does the catlog say during the stutter? Mine showed errors regarding the Bluetooth communication, does yours do that? This can help you find out if it's software or hardware.
My capacitive buttons seem dimm as well, haven't really noticed that before..
AT,
What is the catlog? Where do I find that?
alan sh said:
Thnks Chris. At the moment, I can't get MTP mode to "Stick". I'll keep trying. I may have also found some ADB drivers (on my laptop which is not near me at the moment).
Alan
Click to expand...
Click to collapse
Alan,
If you try and set MTP mode a few times it will stick. However, the text under Select USB Configuration will still say "Charging" unless you leave the Developer options menu and go back in again. Then it should say "MTP (Media Transfer Protocol)".
Chris,
You are a star. That worked and I can now see my internal storage.
Thank you
I just have to find out why my 2016 BMW will not see the music over bluetooth now (my old LG G3 worked fine)
Alan
Alan
Haven't tried to mount to PC yet. Surprising it isn't like the oneplus 3 where it mounts a separate drive on the PC with the drivers?
alan sh said:
Chris,
You are a star. That worked and I can now see my internal storage.
Thank you
I just have to find out why my 2016 BMW will not see the music over bluetooth now (my old LG G3 worked fine)
Alan
Alan
Click to expand...
Click to collapse
The only thing I can think to do is delete the phone from the car's memory entirely. Delete the connection from the phone entirely, and start all over. You may have done that, but on my 2013 Veloster I have had times where I needed to just start over completely. Having said that, no problems out of the box for me so far with the OP5 in my car, bluetooth gym headphones, or either bluetooth speaker I use. It's been very easy.
I tried that - still the same. The attached picture shows what I get.
This is my last major issue with this phone.....
Alan
Onother issue i just found out...
Maybe someone else found a fix, but i didnt....
With my OP2 i always conncted e Little USB adaptor with a micro sdcard in it to the phone to Transfer Music or any other files to or from the phone. When i connected it to the phone it imidiatly was recognized and in the filemanager one more Folder was created to manage These files.
But on my OP5 nothing happens....... can someone help?
Edit: last Oxygen Update, OTG is on, USB Debugging is on
Stefan McSleaze said:
Onother issue i just found out...
Maybe someone else found a fix, but i didnt....
With my OP2 i always conncted e Little USB adaptor with a micro sdcard in it to the phone to Transfer Music or any other files to or from the phone. When i connected it to the phone it imidiatly was recognized and in the filemanager one more Folder was created to manage These files.
But on my OP5 nothing happens....... can someone help?
Edit: last Oxygen Update, OTG is on, USB Debugging is on
Click to expand...
Click to collapse
Yeah, I think TechTablets on Youtube also mentioned USB-on-the-go not working on his OnePlus 5.
pedodroid said:
Yeah, I think TechTablets on Youtube also mentioned USB-on-the-go not working on his OnePlus 5.
Click to expand...
Click to collapse
Would be sad without that feature because always connecting to my PC wouldnt be such comfortable for filetransfer....
Hope that the developer from Oneplus will fix it in future
Had an issue with the APN for T-Mobile in the US. I had data and could make VOLTE calls etc but email through TypeApp or Blue mail would not sync and various other programs had issues (connection errors), over wireless at the house everything was fine. I added the APN suggested by T-mobile haven't had an issue since. All I changed was the APN protocol to IPv6/IPv4 (was just IPv6) and removed hipri and supl from the APN type.
Everything works as it should.
hey I want to ask a question
is the camera on the op5 worse than the note 5 ?
In the advanced settings I noticed a Bluetooth codec option which might help.
I haven't tested it on the car yet. mines a 17 VW so will test it
I've tried changing the codec - no difference.
another annoiing issue....it changes network from O2/4G LTE to EPlus 3G. So i disabled automatic network and switched manual to O2 again. But the same....it really s...ks, because most time it runs with Edge only
tapatalked...
Only issue I have at the moment is too sensitive autorotation of the screen. Even though the rotation happens very fast, I would prefer it not turning in the first place if phone is rotated only few degrees. I wish there was a way to adjust the angle when to rotate the screen.
Sent from my ONEPLUS A5000 using Tapatalk
I had the Sony XAV-AX100 and everything worked great. I just switched to the AX5000 and now AA drops out all the time. It will either freeze up, or it will come up with a warning that there is no connection to USB. I have tried a different usb cable. Same problem. I am using the same phone Galaxy S8 and the same high end USB cable. I uninstalled AA from phone and re downloaded it. Same thing. It is very random. It will boot up AA just fine then go to Pandora play a song or two then drop all connections. If I unplug and wait and plug phone back in it will work for a short time then drop out again.
Anyone have any thoughts on what to try here?
I have talked to Sony chat session not much help here.
Thanks
I talked to Sony a little bit (from what I could understand) They think it is a MSC "Mass Storage Connection" connection with USB. But Android has not had a MSC connection since maybe 2015. So why would this be happening now with this firmware? Anyone have any suggestions on how to get phone to a MSC USB connection instead of MTP? Or the radio to use the standard MTP connection on every Android out there.
I got the AX5000 on Monday and have been fighting the same issue. I have a Samsung Galaxy S7 running Oreo (8.0) and have tried everything from a physical perspective (cables, flash, factory resets) but no luck. When I spoke with Sony today, they tried to tell me that AA was not supported on my car (2012 Jeep Wrangler) which ignores the fact that this is an after-market upgrade. I agree that it's likely an issue with how the head unit communicates with the phone. The only place I have found to change USB settings is under the Developer Options. The available options are Charge this phone, MTP (Media Transfer Protocol), PTP (Picture Transfer Protocol), RNDIS (USB Ethernet), Audio Source, and MIDI. I'll try each of them and resort back on the results.
Yes with talking to Sony they said that the phone USB has to be set to MSC for USB1 to work. Well you would think that they would know that has not been used on android run phone for years. I tried developer mode and setting debugging to on. and even tried different USB configurations in debugging. like Switching it to Audio Source. As soon as plug my phone in it kicks it back to MTP. This is a easy fix for Sony they have the MTP setting on the USB 2 wire. But we will see how long it takes them to do an update on this since they just did one last week. Very frustrating I have the AX5000 on my Harley. So it is not very convenient to mess with it.
Please do post if you find some kind of solution: As I am sure Sony will be awhile.
I had the same result with attempting to switch the USB mode. It switches back when the phone is plugged in. A firmware update may be our only hope.
Well not sure if I found a possible fix. I put my phone in developer mode. Then switched the USB to debugged. and used my original USB cord that came with the S8. For the limited time that I have been able to check it out it has worked. Keep in mind this is on a Motorcycle. So time to work on this is limited. The problem I have is that the original cord is 4' long and I have no where to tuck it in. I have tried several different short cords (amazon) and they all will work for a bit but AA stops randomly.
I still think it is funny When I talked to SONY they said that this radio would not work with my phone USB protocol. But I have talked to several people that say they have no problems with same phone & same radio.
Anyone know where to get a 1' USB cord that would be the same as stock Samsung S8 cord? Yes I check with US cellular. Phone carrier..
Thanks
Does anyone know if Sony has fixed this issue yet? This is really the only deck I want. The 2330 was another I was looking at but the screen is resistive.
Still an issue for me. No firmware update beyond 1.01 and no settings or application conflicts that I've found.
https://ap.community.sony.com/s/que...sing-a-samsung-galaxy-s7-edge?t=1538077755876
connection to AA should automatically set your USB to MIDI.
if it doesn't, try setting MIDI manually before connecting the cable (and double check it after connecting).
Yeah, tried that with my Galaxy S7 and it auto-switches it back.
I have it working using a Pixel 3 XL.
First, enable developer options
Settings > About phone > tap Build number 7 times
Go back to Settings, then System > Advanced > Developer Options > Default USB Configuration > Set to MIDI
I've given up on the Google Forums, looking for some relief here. Last September we bought a new 2017 Honda CRV. Great car, except...
It worked for several months, now I can't get AA to remain connected at all. I think I have been through everything. I just tried the recommended high quality Belikin 3.1 USB cord, it didn't make any difference. Tried other cords as well. This is so frustrating. One of the main reasons we went with the Honda over the Toyota was the availability of Android Auto. Unfortunately, this has been a real excercise in frustration.
When I start the car (USB not connected at this point), Bluetooth connects and AA automatically starts up on my phone. After a few moments, I plug in the USB cord. On the CRV's home screen the blue Android Auto logo shows in the smartphone field. I tap it and my phone connects to the head. So far so good. However, within a minute Android Auto vanished from my phone's screen and on the car's display I get "Device Not Connected".
Has anyone else had/solved this problem? Any of you using an HTC phone? It's not like the phone disconnects, it seems more like AA on the phone just shuts itself off/crashes within a minute or two of starting, but what do I know? Here is the kicker, the system seems to work fine with my wife's Samsung Galaxy S7 phone, SM-G930V. I just went out for a little drive. The HTC refuses to remain connected, the Samsung did just fine.
Error message: On head, "Device Not Connected". AA on my phone just stops. It's like AA on the phone stops working causing a disconnect from the car. Here is more info about my system.
Car/Head Unit make & Model
2017 Honda CRV
Head model: MY16DA
Android Auto version 4.2.2
Kernel Version 3.1.10+
Build number 1.F195.80
HTC 10, model HTC6545LVW USB C cable
Verizon
Android 8.0.0
Android Auto version 3.4.582534-release
Google play services: ver. 12.8.72 (040400-202717283)
Developer Options >USB debugging enabled. USB set to MTP and also tried other settings.
Tried changing out HTC cords to no avail. Just purchased new Belikin USB 3.1 cord. It didn't make any difference.
I have done a factory reset on my phone and on the Honda's display unit as well. I uninstalled HTC's Boost+, reset my phone's Bluetooth. I changed the battery settings on my phone to not optimize AA, Waze and Google Maps.
How can I fix this? Is there anyway out of this rabbit hole?
Switch USB debugging off change Bluetooth from 1.4 to 1.6 in the developers settings
Running into the same problem with an after-market Sony head unit (XAV-AX5000) and a Samsung Galaxy S7 (Oreo 8.0). I'll have to give the BT setting a try.
dq0 said:
Switch USB debugging off change Bluetooth from 1.4 to 1.6 in the developers settings
Click to expand...
Click to collapse
Nope, didn't work. It seems to connect to the phone fine, but then it quickly disconnects, within seconds, or a minute or two. Posting on Honda thread, it doesn't seem to be an across the board problem, I think it's limited to my phone. Having said that on the AA forums there are plenty of complaints about connecting problems. I was hoping against hope that this forum might have a deeper understanding or possible resolutions.
SammyQ2 said:
Nope, didn't work. It seems to connect to the phone fine, but then it quickly disconnects, within seconds, or a minute or two. Posting on Honda thread, it doesn't seem to be an across the board problem, I think it's limited to my phone. Having said that on the AA forums there are plenty of complaints about connecting problems. I was hoping against hope that this forum might have a deeper understanding or possible resolutions.
Click to expand...
Click to collapse
Try turning Dev mode in AA. OPEN app go to About. Click on the title several times.
dq0 said:
Try turning Dev mode in AA. OPEN app go to About. Click on the title several times.
Click to expand...
Click to collapse
I'm willing to try anything, I had no idea that setting existed. Sorry to say that it didn't work. Ugh.
Hi everyone and sorry if my first post has been covered before, but I couldn't find a post that exactly replicated mine.
I have a Kenwood Head unit, model number DMX8020DABS which is Android Auto compatible. My phone is a Samsung A20e running Android 10.
I cannot for the life of me connect my phone to the head unit either by usb cable or wirelessly.
I have had a friends phone iphone connected to the carplay on the unit and also a Samsung Galaxy S10 also, both connected wirelessly as soon as the bluetooth connection was made. This leads me to think my phone is not compatible. I have read about various compatible phones connecting wirelessly and can't see mine in a list anywhere, but I have also read any Android phone with Android 10 should be able to connect via usb cable.
I obviously have the Android Auto app built in to the Android 10 software, one question is do I need to download the Android Auto for phone screens app also?
When I plug my phone into the usb connection to the head unit the phone acknowledges it and the Android Auto app comes up and says follow instructions on car screen, but when you press Android Auto on the kenwood unit the wheel just keeps spinning and it says 'processing' and nothing happens. I have tried resetting the unit, uninstalling/re-installing the AA app, restarting the phone, everything.
Am I missing some settings, not set properly? One thing I noticed in the phone, when you connect the phone and pull down the drop down menu on the phone if you tap on the usb connection settings a screen comes up usb controlled by connected device or this phone, it is set to this phone, and one of the options is Transferring files / Android Auto with a button next to it, when I try to activate that button it won't check it just goes off, even though this is preset in the settings>developer options>networking>default usb configuration where the button is checked.
I have been trying for days to get this to connect. As an aside, my bluetooth connection is fine the unit can make calls and play spotify from my phone, it's just Android Auto that's not working.
Do I need a to get a new phone? Any ideas or advice would be welcomed. Thanks for reading.