Hello. There are some kernals that support fast charging for mi3 and apparently they seem to be working if used with a supported charger. So is it safe to use fastcharging in mi3? Are there hardware limitations?
Related
Hello,
I used for a while stock Google play edition rom and then bought a new charger thats really capable of charging 2A (even measured with ampere app). Then I wanted to use cyanogenmod (12.1) and after installation I found out that I can't charge it with the same speed but 700-800mA thats. So I was wondering if it is a system or kernel limitation? Is there anyway to get it to work properly? Researched about custom kernels that force fast charging but then I'm unable to transfer data.
Same issue with Cm12.1, was good with ARHD and Insertcoin. Did you try enable fast charging ?
Fast charge option in some kernels doesn't have anything to do with chargers. It gives you faster charging when you plug your phone to a computer or laptop
I don't know why fast charging isn't working i have nougat castum rom ported s8
That's clearly a Rom problem
The problem was from the charger i need to change it
Have you checked other chargers and they worked ?
Yes i replaced the usb cable and now fast charging is working
Hi,
I've got an old Samsung Galaxy s4 (i9506) and I would like to use it in my kitchen as multimedia center connected to a TV using a MHL cable. The problem is that phone detects it as USB so it charges only at 500 mA max, and it drains battery quicker.
I've been searching all around, and I didn't find any kernel that supports fast charge for USB ports for this phone... In fact I only found arter97 kernel, obviously not maintained for a long time...
So the question is... is there any easy way to enable fast charge in this phone? I know there's a c patch code available to add fast charge support to any kernel... and arter97 source code is also available, but I don't have enough skills to do it myself...
Ok. I was wrong... There's more kernels around than I though initially, and there's one ported from Note 3 with fast charge feature included:
https://forum.xda-developers.com/galaxy-s4/i9506-develop/kernel-krait-kernel-shv-e330s-k-t3548770
I post it just in case someone faces same doubt.
bye!
Hello everyone,
I am facing the fast charging issue in k20 pro the fast charging stopped working and only does normal charging. In the hardware test it shows as current project need to test USB_ Hvdcp. Is it a software issue
Are you sure the problem is with the phone, and not with either the charger or the USB cable?
Hi, i have Redmi Note 10 Pro (sweet) and from 3/4 days i have facing fast charging (phone says fast charging) slow, 3 hours for charge fully and if i check with battery guru says max 5w output, official xiaomi charger and tried also with baseus 120w charger, before works well fast charging, any suggestion? other with this problem? Unlocked with latest twrp from nebrassy and MIUI Rog edition with delta kernel
Can you confirm that the phone is actually taking 3 hours to charge? Or is it just saying 3 hours until full? My phone was also showing 3 Hours Until Full but in actuality was not taking that long.
Take me about 45 minutes from 30% to 90%, it should be about 1h30m for 0 to 100%
try changing the orientation of usb-c connector on either or both charger and phone connection end and see.
I have no problems charging close to 33W with Xiaomi included charger or my Baseus 65W GAN charger which supports 33W profile. I charge at around 75%/hr
Looks like a problem with twrp /
Go to the concerned forum with this question
If you have Magisk / Super user, they have modules to enable fast charging
Probable cause might be your charger cannot detect the charging profiles supported by your phone. For precaution it uses the slowest profile.
Also you may check with the kernal. Sometimes they purposefully disable fast charging.
JvLTech said:
Looks like a problem with twrp /
Go to the concerned forum with this question
If you have Magisk / Super user, they have modules to enable fast charging
Probable cause might be your charger cannot detect the charging profiles supported by your phone. For precaution it uses the slowest profile.
Also you may check with the kernal. Sometimes they purposefully disable fast charging.
Click to expand...
Click to collapse
I flash a known good rom as charging issues are hard to troubleshoot... reduce the variables.
Or trouble shot the current firmware if you are capable of doing so. The wrong value could cause hardware damage.
Could also be a sign a hardware fault condition exists.
Inspect port with a good light and magnification for any signs of damage. Clean if any debris or dust is present.
Use a known good OEM charger and cable. That means exactly what it says. It's also how I ended up with 2 Samsung bricks/cables
A friend or repair shop might let you use theirs.
Did not root my last two phones anymore. To much problems ;-)
Camera Api2 is activated by default on the 10 pro. So bootloader unlocking also not needed.
JvLTech said:
Looks like a problem with twrp /
Go to the concerned forum with this question
If you have Magisk / Super user, they have modules to enable fast charging
Probable cause might be your charger cannot detect the charging profiles supported by your phone. For precaution it uses the slowest profile.
Also you may check with the kernal. Sometimes they purposefully disable fast charging.
Click to expand...
Click to collapse
Can you link any module? The ones by Laptapper change what it displays, but don't actually change anything sadly.