Carrier: ATT
Rom: AOSiP-V4.0-Marshmallow-6.0.1
Issue: Motorola Turbo Charger
Info: I have had no problems with the stock charger for the last year. Recently, when I plug in the turbo charger into my device, it will not charge. Usually in Ampere, it says it average around 1950 mA of charge, after the issue started occurring, it gives the charging icon but ampere and the built in battery meter says not charging. It actually decreases the charge at a quicker rate.
What I have tried but failed:
Restarting device
Changing Cables
Unplugging charger from wall
What has worked but is not a real solution:
It seems that the phone accepts the wall charger and charges normally after I plug my phone in to my computer via just the cable and then back into the main charger.
424aca said:
Carrier: ATT
Rom: AOSiP-V4.0-Marshmallow-6.0.1
Issue: Motorola Turbo Charger
Info: I have had no problems with the stock charger for the last year. Recently, when I plug in the turbo charger into my device, it will not charge. Usually in Ampere, it says it average around 1950 mA of charge, after the issue started occurring, it gives the charging icon but ampere and the built in battery meter says not charging. It actually decreases the charge at a quicker rate.
What I have tried but failed:
Restarting device
Changing Cables
Unplugging charger from wall
What has worked but is not a real solution:
It seems that the phone accepts the wall charger and charges normally after I plug my phone in to my computer via just the cable and then back into the main charger.
Click to expand...
Click to collapse
This honestly sounds like a outlet problem or a charging box problem. I would check both those if you have not allready.
MellowRoms Nexus 6
Facebook Group Page https://www.facebook.com/groups/212715385759035/
I have a Moto Z Play (Dual Sim Version ~ Germany) and a Incipio Battery Mod. The Mod charges fine when i use the bundled Turbo Charger (Charging is split between Phone and the Mod).
When i use the charger bought on Google Play store, the phone gets charged first to 100% and then the Mod charges.
However when i use a standard charger (the one that was bundled with my Moto X 2013 and a USB 3.0 to USB-C Cable) or a USB port, phone gets charged and it shows "Moto Mod" waiting to be charged for the Mod and it does on charge.
Is this a bug or do i have a faulty Mod? It is a bit annoying as i cannot carry the Turbo charger with me always
I read similar issues were happening with different chargers. Moto charging on a samsung etc Not anything faulty, away they got you to invest on charging cords. and something to do with Quick charge/Turbo charge
My Nokia 8 shows charging on the lock screen and after few minutes it shows the time left to fully charge.
Just then I noticed my phone was on 19% and lock screen was on when I plugged in the charger. On the lock screen above the fingerprint icon it read charging rapidly and then it changed to charging slowly and went back and forth a couple of times, then went just said charging. I can replicate it 100%. Does what it says on the screen really mean it was charging slow and fast and fluctuating in between it?
Phone running oreo beta latest and using stock cable and charger that was supplied. Ampere shows 2910m.
What do you guys make of it.
From 19% to full charge the lock screen shows 3hours. Is that right for Quick Charge?
TIA
I have exactly the same experience with the supplied charger and other QC 3.0 chargers. I tested all the chargers in my house and found my old QC 2.0 Samsung charger is able to constantly rapid charge the phone. I have not yet been able to test of it is actually faster, will update when my battery runs out.
The same here.
I have a QC 3.0 certified charger and it is not showing fast or rapid charge. Looks like there is some issue with Nokia. It was exactly the same using Nougat.
Was able to do further testing and it seems the phone is quick charging with the supplied charger, or any other QC 3.0 charger. The supplied charger was 20 minutes quicker than my old Samsung QC 2.0 charger.
There definitely is a bug in correctly displaying charging rate when connected to QC 3.0 chargers. Also the charging estimates are about twice as high as they should be. The phone can fully charge around an hour and a half, but estimate states three plus hours.
Looks like a couple other people have noticed this issue on the Nokia support forums.
Having issues charging with the original charger since 8.1. When I was in beta 8.1 the charger stopped after 5 seconds same when phone off and charging it just kept rebooting to charge screen. So rolled back to 8.0 and all fine. Now have 8.1 again and the charger has stopped working again. My Nintendo switch charger charges phone fine on 8.1. So is there anything I can try to see why 8.1 has stopped orignal Nokia charger Woking ?
The Nokia charger charges the Nintendo switch fine
Same
Same with me .. Need answer from the expert
Yeah same, mine charges now and again ? and at only 1.5amps! Weird because my QC Charger ramps up to 3.0amps!
I bought the phone four days ago, TA- 1004- Global Dual SIM. Immediately updated it to 8.1. From yesterday Nokia's original charger charges the phone only at 1.5A...
What app do you use to check the charge rate?
Didusieq said:
What app do you use to check the charge rate?
Click to expand...
Click to collapse
Ampere https://play.google.com/store/apps/details?id=com.gombosdev.ampere
May be you can switOpen develop-model , then close usb debug model. maybe help you...
STUPlDidi0t said:
Having issues charging with the original charger since 8.1. When I was in beta 8.1 the charger stopped after 5 seconds same when phone off and charging it just kept rebooting to charge screen. So rolled back to 8.0 and all fine. Now have 8.1 again and the charger has stopped working again. My Nintendo switch charger charges phone fine on 8.1. So is there anything I can try to see why 8.1 has stopped orignal Nokia charger Woking ?
The Nokia charger charges the Nintendo switch fine
Click to expand...
Click to collapse
Try to close developer options in settings. Probably USB debugging could be an issue. Turn it off.
Yeah it's werid my phone charges full speed for a bit then slows down to 1.5ah
I believe Ampere is not really accurate together with QC. Used a small USB multimeter once and there you can see that the charging amperage during quick charging is not much higher then about 1.4A.
One of the characteristics of QC is that the voltage during charing is boosted. At 'peak power' the multimeter showed 12V & 1.4A, thus charging at almost 17W instead of the 'normal' 5V & 1.5A (7.5W).
Hi i am new here so forgive me
i have been checking the QC from beggining and it seems at 9V i get 7V and 1.44A and seems its a new type of battery that works this way at 4.3 volts instead of 5v at 1.79 get from other phones with a 4.2 volt battery.
changed charger with 5V 2.1A and it still went up to 1.44 .
i think the default charger is the only one to use.
i get a day and a half with fb and games seems that it doesnt get hot
SebasNL said:
I believe Ampere is not really accurate together with QC. Used a small USB multimeter once and there you can see that the charging amperage during quick charging is not much higher then about 1.4A.
One of the characteristics of QC is that the voltage during charing is boosted. At 'peak power' the multimeter showed 12V & 1.4A, thus charging at almost 17W instead of the 'normal' 5V & 1.5A (7.5W).
Click to expand...
Click to collapse
Agreed, standard charging is at 5V, QC 2 jumps up to at 9V and QC 3 jumps up to 12V but Ampere's voltage reading doesn't seem to reflect these boosted voltages.
My old Samsung S6 (from which I just upgraded to the Nokia 8) says "fast charging" when QC is active vs "cable charging" at 500mA (e.g. when plugged into a very old charger or PC) vs "charging" at other non-QC rates... I had assumed this was an Android feature that the Nokia 8 would have too, but apparently not, which is rather disappointing. Perhaps it's worth a feature request in the official Nokia.com forum for the N8?
---------- Post added at 09:53 PM ---------- Previous post was at 09:49 PM ----------
Correction: Looking at Ampere again, the voltage appears to refer to the battery, not the incoming power, it only shows the mA for that, not the voltage. So I'll log a feature request for Ampere...
UPDATE: My phone is model TA-1012, I'm currently running Android 8.1.0 with build number 00WW_4_84A_SP03 and I've noticed that the phone DOES tell me if it's quick charging, but only on the lock screen when it's showing notifications, and only as per the following sequence:
1) Directly after plugging in to any charger it says "charging"
2) If it's plugged into a QC2.0 or QC3.0 charger (and using a compatible cable) then after a while (not sure how long exactly, seems to be about 2 mins) this changes to "rapid charging"
3) After another while it changes to "charging (XX mins until full)" or "rapid charging (XX mins until full)" depending on the type of charger (and cable)
However, the phone is supposed to support QC 3.0 but the charging time estimate is always the same no matter whether I use a QC 2.0 or 3.0 charger, which suggests that it's actually a QC 2.0 device.
So i talked with Nokia support about the charging issue. They told me how to fix it...
1. Settings -> apps & notifications -> see all apps -> press the 3 dots in the up right corner -> show system -> battery protection -> storage
-> clear cache and data
2. Soft reset the phone.
How to do a soft reset: Press the Power button and Volume Up until you see "Powered by Android" on the screen. You can then release the buttons . Thats it.
its fast charging , it doesnt fast charge from 0 -100 . it works like this on nokia 8 : from 0-40 3amp , from 40-80 1.5amp , from 80-90 1amp , and decreases slowly from that.
but i have another problem , i dont have original cable and charger , my cable is anker powerline+ and my charger is xiaomi qc3 charger . my problem is that from 0-40 when its fast charging it keeps disconnecting and connecting every 10-15 sec.
BTW u can check your charge status when ur phone is locked (rapid charging = fast charging , charging = normal charging"this is from 80-100" , slow charging = somthing is wrong check ur cable or charger)
Hi guys,
I just got a quinck charger 3.0 from Anker, the P30 Pro is saying it is in "Quick Charge" but it sometimes charge at 2.5A and often at 1.2A.
Do you know if there are some compatibility issues?
Thank you!
It is compatible, iv got a qc3 charger and it shows quick charging by 2 lightening bolts on the battery. Works with wireless quick change as well.
dlevick said:
It is compatible, iv got a qc3 charger and it shows quick charging by 2 lightening bolts on the battery. Works with wireless quick change as well.
Click to expand...
Click to collapse
Thank you. It says quick charge, but it never goes up to 3A. it moves between 1.2A and 2.5A, that's why I'm not sure it works correctly.
I still use it with the fast charge cables (purple ones) I think they handle the power to them