Is there any plastic screen protextion for the Mi 9T Pro out there? Can only find tempered glass wich i hate.
Been searching and can't find anything.
SGT John Doe said:
Is there any plastic screen protextion for the Mi 9T Pro out there? Can only find tempered glass wich i hate.
Been searching and can't find anything.
Click to expand...
Click to collapse
Check this out https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/254269493689
Sent from my SM-G950F using Tapatalk
these plastic screen will turn yellow after some time ?
Aimara said:
these plastic screen will turn yellow after some time ?
Click to expand...
Click to collapse
I've bought one pack but haven't tried them out. I'm currently using a Nillkin branded tempered glass
Sent from my SM-G950F using Tapatalk
ishaqtkr said:
I've bought one pack but haven't tried them out. I'm currently using a Nillkin branded tempered glass
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
nillkin h+ glass ? i notice the k20 pro display ends are curved ?
Aimara said:
nillkin h+ glass ? i notice the k20 pro display ends are curved ?
Click to expand...
Click to collapse
This one[emoji116], fits perfectly, just had 1 bubble on top right corner but that too became small after few days, the rest fits perfectly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G950F using Tapatalk
ishaqtkr said:
Check this out https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/254269493689
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
Awesome, thanks.
Gonna give them a try if i can find them somewhere within EU
ishaqtkr said:
I've bought one pack but haven't tried them out. I'm currently using a Nillkin branded tempered glass
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
I'm using Nillkin Amazing H+PRO atm and i don't like them at all. It's to wide for the corved screen so it leaves a gap on the edges. And they feel wonky aswell.
I have XD CP PLUS 3D and it has absolute no bubbles whatsoever and also covers all the screen. Link: https://s.click.aliexpress.com/e/MPDx1upE
Sent from my SM-G950F using Tapatalk
SGT John Doe said:
Awesome, thanks.
Gonna give them a try if i can find them somewhere within EU
I'm using Nillkin Amazing H+PRO atm and i don't like them at all. It's to wide for the corved screen so it leaves a gap on the edges. And they feel wonky aswell.
Click to expand...
Click to collapse
I have H+ also, no Problems here. But yours looks really bad :crying:
SGT John Doe said:
Awesome, thanks.
Gonna give them a try if i can find them somewhere within EU
I'm using Nillkin Amazing H+PRO atm and i don't like them at all. It's to wide for the corved screen so it leaves a gap on the edges. And they feel wonky aswell.
Click to expand...
Click to collapse
awww man , looks like there is no perfect screen protector yet , gaps on edges will hinder , something games icon are at the edges , the other one which has black border , actually makes the display smaller .
I'll share my Nillkin CP 3D and show you all, no air and no gaps at all.
Sent from my SM-G950F using Tapatalk
SGT John Doe said:
Awesome, thanks.
Gonna give them a try if i can find them somewhere within EU
I'm using Nillkin Amazing H+PRO atm and i don't like them at all. It's to wide for the corved screen so it leaves a gap on the edges. And they feel wonky aswell.
Click to expand...
Click to collapse
Here it is...
Sent from my SM-G950F using Tapatalk
ishaqtkr said:
Here it is...View attachment 4835833
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
nice , does it fit well to that ringke case and any black border ?
Aimara said:
nice , does it fit well to that ringke case and any black border ?
Click to expand...
Click to collapse
it fits with case, regards black border, please see it for yourself
Sent from my SM-G950F using Tapatalk
ishaqtkr said:
Check this out https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/254269493689
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
REcieved mine today and i can't really say i liked them. Useless crap and wont recommend them :/
SGT John Doe said:
REcieved mine today and i can't really say i liked them. Useless crap and wont recommend them :/
Click to expand...
Click to collapse
If it's exactly the one i gave you link then you're right it's rubbish, but thing is i realized later that it's ANTI REFLECTIVE one, there's a clear type as well which I've ordered. Will share my thoughts after it arrives if i remember.
Sent from my Mi 9T Pro using Tapatalk
i think i would get the hydrogel film type once mine black border ones crack , hydrogel type its clear at the borders
ishaqtkr said:
If it's exactly the one i gave you link then you're right it's rubbish, but thing is i realized later that it's ANTI REFLECTIVE one, there's a clear type as well which I've ordered. Will share my thoughts after it arrives if i remember.
Sent from my Mi 9T Pro using Tapatalk
Click to expand...
Click to collapse
Yes that's correct. The film is kinda misty, the glue is way to strong and you can't even peal the #1 plastic of and it will leave with hundred of bubbles
SGT John Doe said:
Yes that's correct. The film is kinda misty, the glue is way to strong and you can't even peal the #1 plastic of and it will leave with hundred of bubbles
Click to expand...
Click to collapse
Yes it is misty which means it blocks reflection. I have now ordered a clear version. They advertise that the bubbles disappear by themselves after few days but that's something to try.
Sent from my Mi 9T Pro using Tapatalk
---------- Post added at 07:28 PM ---------- Previous post was at 07:15 PM ----------
ishaqtkr said:
it fits with case, regards black border, please see it for yourself View attachment 4836379
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
I'm sorry i was wrong, the case lifts the glass so I've decided to order a 2.5D glass and also a Spigen case, if that also fails I'm buying a flat one.
Sent from my Mi 9T Pro using Tapatalk
Found a better way to peel that plastic of the atFoliX. Put it in the freezer a couple hours before and the glue wont be so sticky.
ishaqtkr said:
Yes it is misty which means it blocks reflection. I have now ordered a clear version. They advertise that the bubbles disappear by themselves after few days but that's something to try.
Click to expand...
Click to collapse
Looks like the clear one does not cover the whole screen. Only the flat part.
EDIT: Seems like there's two option on the clear one. But for the entire screen and only the flat part.
Related
The only place I can find that has screen protectors for the Note 2 now is at Clove. So I ordered one with my note 2 from them, the only problem is that its a MIRROR one and I don't really like it.
Anyone know where else we can get the screen protectors? It would be nice to put it on my note 2 when I get it straight away.
I kinda feel like we could kinda use note 1 screen protectors with a little surgery.
I have a few leftovers to tide me over while I wait for a glas.t for the note 2.
- Frank
ChodTheWacko said:
I kinda feel like we could kinda use note 1 screen protectors with a little surgery.
I have a few leftovers to tide me over while I wait for a glas.t for the note 2.
- Frank
Click to expand...
Click to collapse
But the note 2 screen is longer than note 1 isn't it?
Sent from my GT-P7510 using XDA Premium HD app
55nxb said:
I do not like is a mobile phone is not protected and looks very bad look, so I've been good to my phone's screen saver
http://www.elewarehouse.com/Benks-Magic-HR-Screen-Protectors-For-Samsung-Galaxy-Ace-32757.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
??? I dont really get this post...
Sent from my GT-N7000 using xda premium
Amazon USA has the lumii ark 3 pack for 4 + 3 shipping..so 7$..eBay also has it.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
DMax99 said:
But the note 2 screen is longer than note 1 isn't it?
Click to expand...
Click to collapse
Yeah, hence the surgery.
Basically you'd have to cut the very top and bottom off a Note 1's screen protector, and you would have to leave the Note 2's speaker and button area exposed. The LCD would still be protected though.
Not ideal, but I think it should look okay, and tide me over while I wait for a protector brand I'm happy with.
- Frank
mate I was thinkng about a screen protector but then I thought "gorilla glass 2". it's suppose to be unscratchable. now I know how you feel, because I've ALWAYS put on a protector for the LCD. but after taking it off on the S3 for a day, I realised how nice it was to use without the protector. there is a big difference of feel with and without a protector on. now I'll never put one on. considering they have gorilla glass 3, 4, 5 and so forth coming up ;P
but if you wanted a protector anyway I was about to buy 1 from spigen SGP. they have them. very good quality. always to edges of phone and buttons, looks like you don't even have one on _b
Amazon also has the Spigen available
http://www.amazon.com/gp/product/B009F25Z6S/ref=ox_sc_act_title_1?ie=UTF8&smid=A2SFKRF5TPZMT5
I saw some on ebay just a day or two ago.
thanks..
Why would you use a screen protector on gorilla glass screen ? I have not scratched my old desires display in 2 years I have been using it. And the desire has gorilla glass, note has gorilla glass 2 and I suppose it should be even better and even more scratch resistant. Has Samsung used "softer" displays on other phones ?
with the above otherwise here:
http://www.spigen.com/cell-phone/samsung/galaxy-note-2.html
spridell said:
Amazon also has the Spigen available
http://www.amazon.com/gp/product/B009F25Z6S/ref=ox_sc_act_title_1?ie=UTF8&smid=A2SFKRF5TPZMT5
Click to expand...
Click to collapse
which one is better? "Ultra Crystal" Or "Ultra Oleophobic"?
crystal is the clear transparent surface.
oleo is a matte finish. mainly for glare resistant and no smudges on the surface.
I would personally go crystal, keeps the clarity of your picture over matte.
end of day the phone has gorilla glass. I wouldn't get a screen protector at all.
Sent from my GT-I9300 using xda app-developers app
alsolh said:
which one is better? "Ultra Crystal" Or "Ultra Oleophobic"?
Click to expand...
Click to collapse
Oleophobic ones are not really that good. Had it on my note 1. The finger print resistant only lasted a very short time. I'm now using the ultra optic only note 1. But haven't tried ultra crystal yet. If you want the finder print resistant...should go for ultra optic but it's a bit grainy. Oleophobic is not really worth it
Sent from my GT-N7000 using xda premium
entwicklun said:
crystal is the clear transparent surface.
oleo is a matte finish. mainly for glare resistant and no smudges on the surface.
I would personally go crystal, keeps the clarity of your picture over matte.
end of day the phone has gorilla glass. I wouldn't get a screen protector at all.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Oleo is NOT Matt finish.
Sent from my GT-N7000 using xda premium
lemmatti said:
Why would you use a screen protector on gorilla glass screen ? I have not scratched my old desires display in 2 years I have been using it. And the desire has gorilla glass, note has gorilla glass 2 and I suppose it should be even better and even more scratch resistant. Has Samsung used "softer" displays on other phones ?
Click to expand...
Click to collapse
I don't care what anyone says, I have gorilla glass on my gs2 and I managed to scratch it with in the first week.
Now it has a screen protector.
Sent from my SGH-T989 using Tapatalk 2
busab said:
I don't care what anyone says, I have gorilla glass on my gs2 and I managed to scratch it with in the first week.
Now it has a screen protector.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
old technology galaxy s2 is old technology
entwicklun said:
old technology galaxy s2 is old technology
Click to expand...
Click to collapse
It's still gorilla glass. Maybe I'm in the minority in my experience, but it will scratch.
Sent from my SGH-T989 using Tapatalk 2
note 2 has gorilla glass 2. I haven't looked at a comparison, but I'm sure it would be more durable?
Ive always wanted this phone cover! Someone finally got it for for Christmas!!
Now I need a screen protector. Any recommendations?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-N7105 using Tapatalk 2
SGP ultra crystal screen protector & aluminum home buttons!
http://www.spigen.com/cell-phone/samsung/galaxy-note-2.html
Can you take an up lose photo of how much of the screen the case covers? I have that case coming to me and I need to know if I need to order a replacement for my Zagg screen protector(no issues with it but it goes all the way to the edge of the screen).
Thanks
layziebone said:
Ive always wanted this phone cover! Someone finally got it for for Christmas!!
Now I need a screen protector. Any recommendations?
View attachment 1589694
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
what is different in this than Samsing Galaxy Note II Protective Cover I mean what does extra + holds and from where did you get it.
could you also share some pics like un-boxing and on the device
I don't think there is a non-plus version
swyped all these spelling errors from my galaxy note 2
Gvndeb60 said:
Can you take an up lose photo of how much of the screen the case covers? I have that case coming to me and I need to know if I need to order a replacement for my Zagg screen protector(no issues with it but it goes all the way to the edge of the screen).
Thanks
Click to expand...
Click to collapse
I use an xtremeguard screen protector, which goes all the way to the edge (like zagg). The case works fine and doesn't overlap on the screen at all. I don't know how to accurately describe it, but it kind of just sits on the chrome bezel.
______
This case scratches REALLY easily on the back, like the Speck Candyshell. I only have my wallet in the same pocket, and there are noticeable scratches on the back. I think if it get's cheaper in the future, I'll pick another one up and try to make this one matte with fine sandpaper.
winx14 said:
I use an xtremeguard screen protector, which goes all the way to the edge (like zagg).
Click to expand...
Click to collapse
Sorry for being OT, but the XTREMEGUARD goes all the way to the edge? Like including the curved part of the screen? Have you experienced any lifting yet? I dont plan on using any case with it.
Also, does anyone have any discount codes for them?
read through this thread: Best Screen Protector. A lot of people chime in on Just Like Like, SPG, Zagg, to cheap chinese ones. You'll have a much better idea what will find your preferences, needs and wants.
anirudh412 said:
Sorry for being OT, but the XTREMEGUARD goes all the way to the edge? Like including the curved part of the screen? Have you experienced any lifting yet? I dont plan on using any case with it.
Also, does anyone have any discount codes for them?
Click to expand...
Click to collapse
Xtremeguard goes all the way to the edge but it lifts if you have a case that has sharp lifts. Threw mine away but used the battery protector
Sent from my SPH-L900 using Tapatalk 2
sandeeppathak007 said:
what is different in this than Samsing Galaxy Note II Protective Cover I mean what does extra + holds and from where did you get it.
could you also share some pics like un-boxing and on the device
Click to expand...
Click to collapse
Didn't take photos unboxing but here are a couple of photos on the device.
Sent from my GT-N7105 using Tapatalk 2
Just bought this. I recommend it. Just beautiful. Access to everything and with the confidence of buying a genuine product.
Sent from my GT-N7100 using xda premium
I have the black one and the only thing I don't like is how the back easily scratches.
Sent from my SPH-L900 using Tapatalk 2
Haven't had any scratches on the Protective Cover since the day I received it. It's probably because I managed to fit it into a velvet pouch. :silly:
mexiking713 said:
I have the black one and the only thing I don't like is how the back easily scratches.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
winlinmac001 said:
Haven't had any scratches on the Protective Cover since the day I received it. It's probably because I managed to fit it into a velvet pouch. :silly:
Click to expand...
Click to collapse
Mine has alot of tiny scratches but I love it. It fits perfect and matches the phone very well.
Sent from my SPH-L900 using Tapatalk 2
So what if it scratches? Or should we buy a cover for the cover?
Batter a scratch on the case than the phone.
I really love rhis case.
Peace
Sent from my GT-N7100 using xda premium
I would recommend getting the bestskins ever screen protector. High quality products and it's not that expensive.
mariosraptor said:
So what if it scratches? Or should we buy a cover for the cover?
Batter a scratch on the case than the phone.
I really love rhis case.
Peace
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Im just saying it can become an eye sore. They could have made the back mate instead of glossy to eliminate the problem but it is what it is and I would buy it again regardless.
Sent from my SPH-L900 using Tapatalk 2
anirudh412 said:
Sorry for being OT, but the XTREMEGUARD goes all the way to the edge? Like including the curved part of the screen? Have you experienced any lifting yet? I dont plan on using any case with it.
Also, does anyone have any discount codes for them?
Click to expand...
Click to collapse
It goes all the way to the edge. My first one actually got scratched up when I used an alcohol pad to clean it.
No lifting so far. Please be advised that the pen does not work well with it. I use the pen like once every two weeks, so I just left this screen protector on. Might replace it when there is a non-zagg-like one that goes to the edges.
winx14 said:
It goes all the way to the edge. My first one actually got scratched up when I used an alcohol pad to clean it.
No lifting so far. Please be advised that the pen does not work well with it. I use the pen like once every two weeks, so I just left this screen protector on. Might replace it when there is a non-zagg-like one that goes to the edges.
Click to expand...
Click to collapse
These cover more than xtremeguard and are better with the s pen. I had an xtremeguard screen protector then I switched to jlg and I like this one alot better. Use code iwantultra for 40% off plus free shipping.
www.clearprotector.com
Sent from my SPH-L900 using Tapatalk 2
can someone tell me if the original sammy case is compatible with this?
http://www.spigen.com/cell-phone/sa...note-2-screen-protector-steinheil-series.html
or will it lift it at the corners? thanx
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Love it. Paired a bumper (albeit with the stupid antenna cutout) with an NFC enabled CF backing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Wow that looks incredibly good! Where did you find the NFC carbon backing?
masterme117 said:
Wow that looks incredibly good! Where did you find the NFC carbon backing?
Click to expand...
Click to collapse
Think its on Ebay for like $12, little too expensive for my taste despite it looking pretty nice
erick161 said:
Love it. Paired a bumper (albeit with the stupid antenna cutout) with an NFC enabled CF backing.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Link pls
Sent from the TermiNOTEr 2!
Got a link to the tpu bumper?
-TeaM VeNuM Like A Boss
-Galaxy Note II Edition
Its probably this bumper
http://www.ebay.ca/itm/NEW-BLACK-BU...ries&hash=item51a49d81b7&_uhb=1#ht_4518wt_937
http://www.ebay.ca/itm/Samsung-Gala...ies&hash=item3ccdbeefd7&_uhb=1#ht_2567wt_1163
with this black cover
without NFC
http://www.ebay.ca/itm/Battery-Cove...ies&hash=item416d579c8d&_uhb=1#ht_3766wt_1163
with NFC
http://www.ebay.ca/itm/Carbon-Fiber...ies&hash=item3ccb99eeaa&_uhb=1#ht_2586wt_1163
IamPro said:
$12, little too expensive for my taste
Click to expand...
Click to collapse
Lol what?
Sent from my SCH-I605 using Tapatalk 2
Looks pretty cool. I was thinking about doing the same thing but with a aluminum bumper.
Looks like the tpu bumper covers the buttons. How difficult is it to push with the tpu?
Sent from my SPH-L900
DarkManX4lf said:
Looks pretty cool. I was thinking about doing the same thing but with a aluminum bumper.
Click to expand...
Click to collapse
don't do the aluminum bumper. I got one today and you're just asking for scratches on the screen whenever you put it on it take it off. That was actually my whole plan too.
Sent from my SGNII
Happy with my aluminum bumper. No scratches.
Sent from my SGH-T889 using xda premium
jlczl said:
Happy with my aluminum bumper. No scratches.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
Does that one screw together? Or does it have the piece that slides across the screen? Link?
Sent from my SGNII
crzycrkr said:
Does that one screw together? Or does it have the piece that slides across the screen? Link?
Click to expand...
Click to collapse
Sweat Armor
Package Content:
* 1 x Front Frame of Sweet armor gNote2
* 1 x Main Frame of Sweet armor gNote2
* 2 x Power Button
* 4 x Volume Button
* 1 x Driver
* 8 x Spare Screw
Click to expand...
Click to collapse
Is it real CF or some sort of overlay? I have plenty of real CF stuff...and it looks a little off...but might just be the picture, or it might be the first time I've seen carbon overlays applied to something as small as a phone
Lord Sekhmet said:
Sweat Armor
Click to expand...
Click to collapse
Geeze $70?! Way too much for an aluminum bumper. What's so special about it that makes it $70?
DarkManX4lf said:
Geeze $70?! Way too much for an aluminum bumper. What's so special about it that makes it $70?
Click to expand...
Click to collapse
It's sweat....
Sent from my SCH-I605 using Tapatalk 2
coiledwire said:
Looks like the tpu bumper covers the buttons. How difficult is it to push with the tpu?
Sent from my SPH-L900
Click to expand...
Click to collapse
Not hard, but hard enough you won't hit the volume button at the same time you are hitting the power button to lock to the screen.
I do wish however that the TPU case was a little more soft... more silicone like. ..just for grip. But I love it.
Who ever said $12 is expensive for am nfc back is crazy lol.
They also make it in white
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Purchased both a white CF backplate and black bumper. Will update with pics when it arrives.
erick161 said:
Not hard, but hard enough you won't hit the volume button at the same time you are hitting the power button to lock to the screen.
I do wish however that the TPU case was a little more soft... more silicone like. ..just for grip. But I love it.
Who ever said $12 is expensive for am nfc back is crazy lol.
They also make it in white
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Does nfc work? I read in another thread someone was saying their nfc didn't work on a cf back cover.
I really like this setup. I was thinking of doing the same thing but was going to get a bodyguardz cf armor skin and then run a bumper with it. I kinda think this way might be the better way to go.
Sent from my Nexus 7 using xda app-developers app
So i bought a tempered glass.
But the sides woulnt fit.
Is this thing a bit round on the glass?
Looks like it is round a bit.
Can you post a pic to get a better idea of what you are describing. Also some screen protectors are smaller than the screen to help with cases and also to avoid edge peeling.
Sent from my Nexus 6 using Tapatalk
sdakidd88 said:
Can you post a pic to get a better idea of what you are describing. Also some screen protectors are smaller than the screen to help wit cases and also to avoid edge peeling.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Did already remove it.
The sides it wouldnt fit stays open on the sides does not fill completely.
I bought one now wich is a bit round and should fit on the nexus 6 (i hope).
My english is not very good ...
Hard to explain...
I ordered this one, I am currently using it. So far it has been great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 6 using Tapatalk
sdakidd88 said:
I ordered this one, I am currently using it. So far it has been great.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Is that one a bit round to ?
Does the package says it ?
Did it fill the whole screen?
It is round but it fits well in my case.
Sent from my iPhone using Tapatalk
sdakidd88 said:
It is round but it fits well in my case.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
You have the same problem.
Its open at the sides.
I see air under the sides ...
Guess yours is not round to so it does not fit very well .
I see what you mean. My moto x is a lot worse so I am happy with this one
Sent from my Nexus 6 using Tapatalk
sdakidd88 said:
I see what you mean. My moto x is a lot worse so I am happy with this one
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Thanks for helping me out.
Will put a pic if i have my round one
Toeterbaas is right.
Yesterday I have installed one on my Nexus 6 (cheap one from E-Bay) and I am suffering same issue, the sides are not fitting well.
The videos in YouTube shows no issues but I am getting them.
I am not sure what is the reason for that.
Today I've ordered a new one called "G-Shield" from Gizzmo, and I'll try something else, but I am not sure.
Anyone with a successfully installed glass?
Best tempered glass protector I've used. Love it. And I tried like 3 different types.
Tranesca Full Cover Edge to Edge Tempered Glass Screen Protector for Google Nexus 6
https://www.amazon.com/dp/B01CNWKACK/ref=cm_sw_r_em_apa_MupqybCSFHR03
Goes right around the edges. Can't even see it. Love this protector. Seriously
Sent from my Nexus 6 using XDA-Developers mobile app
ozzmanj1 said:
Best tempered glass protector I've used. Love it. And I tried like 3 different types.
Tranesca Full Cover Edge to Edge Tempered Glass Screen Protector for Google Nexus 6
https://www.amazon.com/dp/B01CNWKACK/ref=cm_sw_r_em_apa_MupqybCSFHR03
Goes right around the edges. Can't even see it. Love this protector. Seriously
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
Buy the one @ozzmanj1 linked above; I'm on my 3rd and they all have fit perfectly. This was the 5th and only one I found on Amazon that fit properly.
tnp9008 said:
Buy this one; I'm on my 3rd and they all have fit perfectly. This was the 5th and only one I found on Amazon that fit properly.
Click to expand...
Click to collapse
The one I posted works great. No halo effects and fits great.
Sent from my Nexus 6 using XDA-Developers mobile app
ozzmanj1 said:
The one I posted works great. No halo effects and fits great.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
He wasn't arguing with you. He was CONFIRMING what you said.
ozzmanj1 said:
The one I posted works great. No halo effects and fits great.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
That's what I was saying as well; just confirming that it was the best one to buy since I've been through a lot of these things. The N6 seems to be a hard phone to fit a TG screen protector on due to the curved screen edges.
No argument intended, but I did edit my original post to clarify. :good:
tnp9008 said:
That's what I was saying as well; just confirming that it was the best one to buy since I've been through a lot of these things. The N6 seems to be a hard phone to fit a TG screen protector on due to the curved screen edges.
No argument intended, but I did edit my original post to clarify. :good:
Click to expand...
Click to collapse
Apologies I guess I misunderstood. But yeah, it's awesome. I bought 2 extra glass covers. It's superb
Sent from my Nexus 6 using XDA-Developers mobile app
I have bought a Nillkin 9H+ 2.5D Tempered glass screen protector, it costs about 12 bucks on ebay, and it is brilliant, one of the best tempered glass you can buy for your Nexus 6. I'd say it is the best one, but I didn't tried every single one on the market, so I can't. But it is hard to imagine a tempered glass for our dear Shamu to be any better than this.
The glass is precisely cut to end right where the glass on the phone starts to curve, so there is almost no halo effect, just a very minor at the top, but that's nothing to worry about. It is also very durable, at 9H it is as strong as other tempered glasses, but in reality it is very hard to scratch it, believe me, I tried. I even tried things like sandpaper on it, just for fun You can obviously scratch it with a sandpaper or something really hard, but with any everyday item like scissors, keys etc. it can't be scratched.
It has also very smooth surface with super good anti fingerprint coating, it doesn't get fingerprints as much as other glasses do, and when it gets dirty, you can easily wipe it on your t-shirt or something. It is also very comfortable for fingers, so much it is in fact addictive
I use it for about half of a year now, and I can fully recommend it. It will last long if you don't drop your phone and crack it. I think it can easily last over a year if you don't drop it and crack it. Mine is cracked but I still use it anyway, because the crack isn't very visible.
Cutouts are proper and precise, on the top there is a cutout for a proximity sensor, the front facing camera is covered under the glass. No image quality issues if you care about selfies.
You can't definitely go wrong with this one, it is worth every dollar. It can be a little more expensive one at $12, but it is worth it. If it breaks, I'll buy the same one again. I use it with Spigen neo hybrid case and it is perfectly fine.
And as a bonus, you get a couple of small rear camera plastic protectors.
I might take a photo when I get home if you want
PS: the edges of the glass are a little rounded, so called 2.5D effect. Very cool and smooth for fingers.
I have both clear/clear and clear/ black cases and both are nice cases.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The cases have polycarbonate backs/sides and top and a little bit of stiff tpu around the USB area and buttons. The tpu forms the mm or so that protects the screen if placed face down. It is a little difficult pushing the phone into the case but it can be done. The slider is easier to get to compared to my orzly bumper case.
Between the orzly and poetic I think I like the poetic better because it feels a little less bulky with what seems to be close to the same protection. . I think this is now my go to case.
Sent from my ONEPLUS A3000 using Tapatalk
It is easy to remove the case? I'm using spigen and while it looks good, I find it a bit hard to uncover from the phone.
I'm going to say that it is hard to remove... I might struggle a little while removing it.
Sent from my ONEPLUS A3000 using Tapatalk
tdamocles said:
I have both clear/clear and clear/ black cases and both are nice cases.
The cases have polycarbonate backs/sides and top and a little bit of stiff tpu around the USB area and buttons. The tpu forms the mm or so that protects the screen if placed face down. It is a little difficult pushing the phone into the case but it can be done. The slider is easier to get to compared to my orzly bumper case.
Between the orzly and poetic I think I like the poetic better because it feels a little less bulky with what seems to be close to the same protection. . I think this is now my go to case.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Can you post front and back pictures of the phone with the case on? Was deciding b/w this an neo hybrid
omgbuffguy said:
Can you post front and back pictures of the phone with the case on? Was deciding b/w this an neo hybrid
Click to expand...
Click to collapse
Got some pictures here. Sorry it was taken with a Galaxy S4 and it is the clear / clear version. I would not try this with a pleson/orzly/yootech tempered glass. It would definitely pop it off.
Sent from my ONEPLUS A3000 using Tapatalk
tdamocles said:
Got some pictures here. Sorry it was taken with a Galaxy S4 and it is the clear / clear version. I would not try this with a pleson/orzly/yootech tempered glass. It would definitely pop it off.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Hmm how come you're not using the black one? Would it be possible to show how it looks I'm he black please?
Sent from my ONEPLUS A3000 using Tapatalk
tdamocles said:
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Damn, this looks to be a lot better than my Fusion Bumper. I find it looks so beautiful.
I've just ordered the Clear/Black Case from Amazon UK. I ordered the Soft Gold phone and wanted a decent case,this one looks very promising. Thanks for the photos.
I bought the black one and its really scratched altough ita a new.
Can you post some photos,thank you.
Its really hard to show this on the pictures.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
samson09 said:
I bought the black one and its really scratched altough ita a new.
Click to expand...
Click to collapse
Ok, I will see how it stands up to daily use when mine arrives.
MISSDIVA said:
I've just ordered the Clear/Black Case from Amazon UK. I ordered the Soft Gold phone and wanted a decent case,this one looks very promising. Thanks for the photos.
Click to expand...
Click to collapse
Can you post some pics on how it looks with the case applied please?
I had one of these for an Honor 5X and it's a nice case.
Sent from my ONEPLUS A3000 using Tapatalk
tdamocles said:
I have both clear/clear and clear/ black cases and both are nice cases.
The cases have polycarbonate backs/sides and top and a little bit of stiff tpu around the USB area and buttons. The tpu forms the mm or so that protects the screen if placed face down. It is a little difficult pushing the phone into the case but it can be done. The slider is easier to get to compared to my orzly bumper case.
Between the orzly and poetic I think I like the poetic better because it feels a little less bulky with what seems to be close to the same protection. . I think this is now my go to case.
Click to expand...
Click to collapse
What tempered glass do you have on there?
Can anybody recommend a screen protector with this case?
I'm using the v2 orzly tg right now. It's really close to the edges. We'll see if it lifts it in the future.
Sent from my ONEPLUS A3000 using Tapatalk
tdamocles said:
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Thank you so much for those pics (real life lighting conditions, much more convincing than the CGI pictures on amazon!), they gave me the nudge I needed to go with the clear/black, really good looking
(in this thread, it is stated that OP's official tempered *curved*(!) glass works well with the Poetic Affinity case.)
:fingers-crossed:
tdamocles said:
I'm using the v2 orzly tg right now. It's really close to the edges. We'll see if it lifts it in the future.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse