After downloading gcam on my k20 pro all photos are stuck processing HDR+ after being taken
I have tried restarting, reinstalling, and using different updates with no luck
Running muiui.eu 11.0.2.0 but have also tried on muiu.eu 10.4.6.0 with no luck, all photos are stuck processing after being taken and never finish the processing
Any help would be greatly appreciated thanks!
GCam 7.0 works well. But at times it also shows the processing popup but images get saved in few seconds unlike older GCams.
nijom said:
GCam 7.0 works well. But at times it also shows the processing popup but images get saved in few seconds unlike older GCams.[/QUOTE
Any links to the APK file?
Click to expand...
Click to collapse
Aimara said:
nijom said:
GCam 7.0 works well. But at times it also shows the processing popup but images get saved in few seconds unlike older GCams.[/QUOTE
Any links to the APK file?
Click to expand...
Click to collapse
I used the link in the below article. I'm on 10.4.8
https://beebom.com/how-get-google-camera-7-0-gcam-any-android-device/
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Same here!
I recently got the MIUI 11 Android 10 update yesterday on my K20 Pro China Stable ROM.
I have already tried a lot off GCAM versions but they all didn't work.
I got stuck in HDR+ processing, although the image was already present on the gallery. It's quite annoying!
---------- Post added at 03:54 PM ---------- Previous post was at 03:42 PM ----------
Update: I used this version and everything was workingfine!
https://f.celsoazevedo.com/file/cfiles/gcm1/PMGC_7.1.019_VersionStable_V1.apk
I just find a solution for redmi k20 pro gcam hrd processing stuck in miui 12. So here is the solution.. Hypercam 6.1 XML use must
Config Files for jairo_rossi's HyperCam (6.1)
Stable settings for jairo_rossi's HyperCam (6.1) with xml config files support.
www.celsoazevedo.com
Related
There are a lot of versions of Google Camera Mod floating around on XDA forums for obvious reason - there's no single version that works just fine on all phones.
It also means that not everyone has the patience to test out every version, with every possible configuration. But fortunately, I've found a stable version among all these hundreds of these after trying many of them from different sources.
-------------------------------------------------------------
Update: Mar-2019
Current version (stable):
Pixel 3 Google Camera (based on version 6.1) by san1ty
This is the most recent and stable version available now based on the feedback of many users.
Archived:
Download
Older version (stable): Pixel2MOD V6 Download
-------------------------------------------------------------
Mods by @[B]Arnova8G2[/B]
This thread will be updated whenever a newer version with same/better stability is found (by anyone).
( For a full comparison of the photo quality, stability notes and suggested settings - you can read the article on it )
any idea how to change the storage from internal memory to sd card? couldn't find in settings.
How can I install this apk on Nitrogen OS? I'm not able to open the app , it says "Camera it's not responding"
Does .dng(raw) images taken from camera work ?
Camera help grp for u r questions
Follow the rules
https://t.me/joinchat/DXLUGw-W_5gM8wNFB6tGkQ
22sumit said:
any idea how to change the storage from internal memory to sd card? couldn't find in settings.
Click to expand...
Click to collapse
Sorry, I don't know.
TheGameExtreme said:
How can I install this apk on Nitrogen OS? I'm not able to open the app , it says "Camera it's not responding"
Click to expand...
Click to collapse
This works on almost all 8.0+ ROMs as long as they have Camera2 API support and are 64bit builds. Make sure you're ROM meets these requirements.
KingMaker Charles said:
Does .dng(raw) images taken from camera work ?
Click to expand...
Click to collapse
Yes. Your have to enable the RAW capture from settings.
Not working with stock rom
aman9_6 said:
Not working with stock rom
Click to expand...
Click to collapse
Needs a 64bit ROM + Camera2 API.
I don't think stock ROM is 64bit
Thanks Bro is going Great 4 me hell yess
---------- Post added at 02:55 PM ---------- Previous post was at 02:25 PM ----------
Actually the best mod for me so far
Hey, did you try any of the later versions of the camera?
In my Moto g5 plus i have downloaded this version only and only vedio recording, paranoma and photo sphere are working and I try to switch to photo mode it stops working crashes and says open app again and this goes on and after sometime it says force close
Prince khatri said:
In my Moto g5 plus i have downloaded this version only and only vedio recording, paranoma and photo sphere are working and I try to switch to photo mode it stops working crashes and says open app again and this goes on and after sometime it says force close
Click to expand...
Click to collapse
Use gcam minimal
Prince khatri said:
In my Moto g5 plus i have downloaded this version only and only vedio recording, paranoma and photo sphere are working and I try to switch to photo mode it stops working crashes and says open app again and this goes on and after sometime it says force close
Click to expand...
Click to collapse
In which ROM? it works fine in PE july
jsanket95 said:
Hey, did you try any of the later versions of the camera?
Click to expand...
Click to collapse
Yes, check the original post. New mod has been added.
yourSAS said:
Yes, check the original post. New mod has been added.
Click to expand...
Click to collapse
I use Pixel Experience ROM. Usually when I install a new GCAM it sits along the one provided on the ROM, but when I installed the new minimal version it seems to have overwritten it. Version is 5.2.025
I'm running LineageOS 15.1 and when I'm playing music on Spotify, if I go to take a picture with this camera it will stop Spotify. This only happens with HDR on. I'm assuming this is due to it having to use all the phone resources to process the HDR photo? The load time takes quite a while for the HDR photos too, and sometimes it will just keep loading forever when I try to view the photo.
The HDR-off mode of this camera also doesn't work well. The picture it takes just glitches out at times and is splotchy looking.
gcam minimal is the most stable I have used.
https://forum.xda-developers.com/showpost.php?p=76975902&postcount=5208
XoticPhones said:
I'm running LineageOS 15.1 and when I'm playing music on Spotify, if I go to take a picture with this camera it will stop Spotify. This only happens with HDR on. I'm assuming this is due to it having to use all the phone resources to process the HDR photo? The load time takes quite a while for the HDR photos too, and sometimes it will just keep loading forever when I try to view the photo.
The HDR-off mode of this camera also doesn't work well. The picture it takes just glitches out at times and is splotchy looking.
Click to expand...
Click to collapse
I think it's because of the microphone usage by both apps.
wastedige said:
I use Pixel Experience ROM. Usually when I install a new GCAM it sits along the one provided on the ROM, but when I installed the new minimal version it seems to have overwritten it. Version is 5.2.025
Click to expand...
Click to collapse
Yes, because both of these mods are Arnova8G2's and use same package name.
I am using Moto G6 4GB variant and the default camera OK but Google camera is the best that I have ever used.
Can someone link me to APK of a mod of it for this device?
Thanks!
the only way it'll work is on GSI's using the last (2015ish version 4.2) 32bit version, https://www.apkmirror.com/apk/google-inc/camera/camera-4-2-022-135443920-release/
This is the best version I've used, it activates the HDR + mode
https://www.celsoazevedo.com/files/android/google-camera/f/LG_Q7_GoogleCamera_4.2.035-armv7a.apk
It works amazingly!!
Thanks for this! The quality is much much more clear than with the traditional app!
Thanks a lot
Is it possible to install gcam 6 on this device. Cant find any.
---------- Post added at 05:31 AM ---------- Previous post was at 05:18 AM ----------
If I installed the pie update. Can I install gcam 5 or 6?
Am older bsg mod was posted on telegram which got me playing around a bit. This gcam doesn't have smart burst, but also doesn't have the focus issues.
https://f.celsoazevedo.com/file/gcamera/MGC_3.2.045_Mi8_2.apk
I'm running out with the following settings in the attached screenshot.
Sasikiran229 said:
Is it possible to install gcam 6 on this device. Cant find any.
---------- Post added at 05:31 AM ---------- Previous post was at 05:18 AM ----------
If I installed the pie update. Can I install gcam 5 or 6?
Click to expand...
Click to collapse
No, they are only built for arm64. You won't get support through any Motorola update, only potential custom work.
How to download it .Please give me The link.
Gurpreet0211 said:
How to download it .Please give me The link.
Click to expand...
Click to collapse
Read the posts above u
Hello.
I have installed the gcam , mentioned above, quality is awesome, but i cant use LED flash.
It doesnt work.
Any ideas?
Google Camera
It was very good the app.
I recently updated my mi a2 to android pie and install ed Magisk . Then enabled camera2api via buildprop editor. The Arnova pixel 2 camera port work flawlessly but whenever I tried to launch any pixel 3 camera port it crashes after 3 second.
I tried every pixel 3 camera port and same thing happens everytime.
I need help so that I can use the night sight feature.
Kingsuk50 said:
I recently updated my mi a2 to android pie and install ed Magisk . Then enabled camera2api via buildprop editor. The Arnova pixel 2 camera port work flawlessly but whenever I tried to launch any pixel 3 camera port it crashes after 3 second.
I tried every pixel 3 camera port and same thing happens everytime.
I need help so that I can use the night sight feature.
Click to expand...
Click to collapse
It is due to MI A2 has Dual Camera and In android Pie there is new featured called Multi-Camera API which enables to manufacture to make available other camera sensor to use in other third party apps .
Thus this had added Line in prop that States
"persist.vendor.camera.HAL3.enabled=1"
This line add camera 's Vendor file from vendor image/files to support Multi-Camera API from manufacturer's propitiatory camera files.
But this implementation of Vendor partition is not proper similar to Treble Support .There are optimisation problems both ways Application(GCam,ETC) point of view and GSI Rom point of view.
In the Carbon PIE ROM for 6X/A2, pixel 3 camera works fine, with night sight too. Xiaomi messed up something in settings... Even older pixel 2 versions are working worse than on other ROMs. Image quality on gcam ports are worse than stock cam on PIE update... Shame...
Sent from my Mi A2 using Tapatalk
So I guess there is no way to fix this crash in stock pie rom
Kingsuk50 said:
So I guess there is no way to fix this crash in stock pie rom
Click to expand...
Click to collapse
Not yet.
Interesting, when I have edited build.prop in root\vendor, saved and rebooted, after reboot in build.prop there was no line I have added. So, it is reverting to original after rebooting. Also, I have replaced media profiles in vendor\etc , and after reboot they reverted to stock, wtf?
Sent from my Mi A2 using Tapatalk
@Mr.Nice.ba, I'm on PIE stable, enabled camera2 with setprop commands and gcam mod from OREO is working like it should, even 4K with stabilisation is working.
Arnova v8.3b1
All v6 of gcam mods are crushing, but I did not used them in OREO neither.
That version is working for me too, but that gave me worst results than stock camera, not even close to Carbon Pie Rom + Pixel 3 camera, not even close...
Edit: mind sharing your in app settings. For me iso is always too high compared to stock cam, because of that photos have more noise.
Sent from my Mi A2 using Tapatalk
After searching minnuss's thread I added the following codes in buildprop editor
"persist.camera.stats.test=5"
"persist.vendor.camera.stats.test=5"
Now all pixel 3 gcam works with night sight
Kingsuk50 said:
After searching minnuss's thread I added the following codes in buildprop editor
"persist.camera.stats.test=5"
"persist.vendor.camera.stats.test=5"
Now all pixel 3 gcam works with night sight
Click to expand...
Click to collapse
Thanks, that really worked for me
Kingsuk50 said:
After searching minnuss's thread I added the following codes in buildprop editor
"persist.camera.stats.test=5"
"persist.vendor.camera.stats.test=5"
Now all pixel 3 gcam works with night sight
Click to expand...
Click to collapse
Which Google Cam version you using?
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
kwasi76 said:
Thanks, that really worked for me
Click to expand...
Click to collapse
Which Google Cam version you using?
Oline1032 said:
Which Google Cam version you using?
---------- Post added at 06:45 PM ---------- Previous post was at 06:44 PM ----------
Which Google Cam version you using?
Click to expand...
Click to collapse
GCam_Pixel3Mod_1.3beta_build.6.1.0210.
Here is the download link
https://www.celsoazevedo.com/files/android/google-camera/f/GCam_Pixel3Mod_1.3beta_build.6.1.0210.apk
Kingsuk50 said:
GCam_Pixel3Mod_1.3beta_build.6.1.0210.
Here is the download link
https://www.celsoazevedo.com/files/android/google-camera/f/GCam_Pixel3Mod_1.3beta_build.6.1.0210.apk
Click to expand...
Click to collapse
You are in PIE or Oreo? to Enable Camera 2 Api which methods do you used? please give me with link. thanks
i am in pie but 6.1 any versions can't work in my phone.
Oline1032 said:
You are in PIE or Oreo? to Enable Camera 2 Api which methods do you used? please give me with link. thanks
i am in pie but 6.1 any versions can't work in my phone.
Click to expand...
Click to collapse
https://www.celsoazevedo.com/files/android/google-camera/f/MGC_6.1.021_MI8_V1a.apk
This is the most stable version I've found.
Why do people still recommend ANXCameraUnity_158.SlimyColdHusky.zip everywhere?
There are already lots of newer versions out - do they not work with the Mi 9T Pro, or why are people still recommending this specific version?
Can I safely install the latest one?
KuroRyu said:
Why do people still recommend ANXCameraUnity_158.SlimyColdHusky.zip everywhere?
There are already lots of newer versions out - do they not work with the Mi 9T Pro, or why are people still recommending this specific version?
Can I safely install the latest one?
Click to expand...
Click to collapse
I flashed the latest one, restarted, then flashed the 48mpx/Q libs add-on - everything works except portrait mode (can't connect to the camera error) I had to add permissions manually in the settings though. It actually works pretty well.
therightperson_630 said:
I flashed the latest one, restarted, then flashed the 48mpx/Q libs add-on - everything works except portrait mode (can't connect to the camera error) I had to add permissions manually in the settings though. It actually works pretty well.
Click to expand...
Click to collapse
Did portrait mode work after you adjusted the permissions.
To me it still seems that I should go with 158 slim husky if the newer versions are so buggy
KuroRyu said:
Did portrait mode work after you adjusted the permissions.
To me it still seems that I should go with 158 slim husky if the newer versions are so buggy
Click to expand...
Click to collapse
Be careful if you have magisk add-on, remove it and try again. After that it should work as normal
What version do you use?
hello there,
i have some problem regarding anx camera, i am using pe+ march edition since the april edition is not really stable for me especially the function inside the anx camera ( yes i know gcam is exist )
the problem is, the camera is lagging after i taking the picture via main lens or changing to other lens after taking picture from the main lens
i am using the latest version of anx camera..installing the add on module,clearing apps data, installing old version seems not helping at all
any suggestion ?
regards
KuroRyu said:
Did portrait mode work after you adjusted the permissions.
To me it still seems that I should go with 158 slim husky if the newer versions are so buggy
Click to expand...
Click to collapse
I can't say for the 158 slim husky, not tried it. but even with the Q libs portrait mode still doesn't work, so I just avoid using it really - if I really need portrait mode I'll use GCAM.
---------- Post added at 08:41 PM ---------- Previous post was at 08:39 PM ----------
affendymahmud said:
hello there,
i have some problem regarding anx camera, i am using pe+ march edition since the april edition is not really stable for me especially the function inside the anx camera ( yes i know gcam is exist )
the problem is, the camera is lagging after i taking the picture via main lens or changing to other lens after taking picture from the main lens
i am using the latest version of anx camera..installing the add on module,clearing apps data, installing old version seems not helping at all
any suggestion ?
regards
Click to expand...
Click to collapse
This sounds pretty normal. It's processing the photo you just took from the main cam I suppose (happens with Gcam too). Wait a short while before taking another picture or changing modes.
Instructions:
1. Upload File to Magisk
2. Restart
3. In case it doesn't work, manage the permissions manually.
No fix for 48Mpx needed.
Bugs:
There are no or unknown.
Running:
Wide angle
2x
Slow motion
Video and wide-angle video
Panoramic selfie
48Mpx and 32Mpx
Portrait mode
And more.
Note:
* Use only with rom vendor10, Android 10.
* Do not try to combine with ANX Camera, I am not responsible for failure if combined.
* It does not enable 48Mpx in the gcam, apparently it is a problem inherited from Android 10 in this device since I have verified that neither the open camera shows them in the stock rom, in Android 9 the 48Mpx mode worked well outside the camera stock, apart from the limitations of 1 / 4s that also affect custom roms in third-party apps (OpenCamera, some gcam) etc.
Download url:
https://drive.google.com/file/d/14Ce5nwqk2cye_75noCOFqfChkeO5TOy8/view?usp=sharing
Can you increase exposure time in pro mode more than 32 secends?
How is the picture quality?
AFH is offline, could you make it available elsewhere?
@Nodierg1 can you upload it again? Link doesn't work.
You there man ?
Download link not working link update
hdnote said:
Can you increase exposure time in pro mode more than 32 secends?
Click to expand...
Click to collapse
Fixed view this post:
https://forum.xda-developers.com/mi-a3/themes/32s-fix-android-10-mi-a3-magisk-module-t4097673
ramswamy said:
Download link not working link update
Click to expand...
Click to collapse
File link is update now.
neemzeey said:
@Nodierg1 can you upload it again? Link doesn't work.
Click to expand...
Click to collapse
https://drive.google.com/file/d/14Ce5nwqk2cye_75noCOFqfChkeO5TOy8/view?usp=sharing
Nodierg1 said:
Fixed view this post:
https://forum.xda-developers.com/mi-a3/themes/32s-fix-android-10-mi-a3-magisk-module-t4097673
Click to expand...
Click to collapse
In this link, is it more than 32 seconds?
hdnote said:
In this link, is it more than 32 seconds?
Click to expand...
Click to collapse
Exactly.
Nodierg1 said:
Exactly.
Click to expand...
Click to collapse
What is the maximum exposure time that you used?
I don't think it is more than 32 secs.
I did flash it in magisk!
Noting changed!
I installed this câmera here under my actual CrDroid 6.6 ROM and for point-and-shoot it works better than ANX Camera.
However, if you wish the functions of the Pro Mode, like options to Focus and Shutter Speed, so you have to go to ANX + Fixes >.<'
Camera error in redmi note 5 pro android 10 how to fix
ramswamy said:
Camera error in redmi note 5 pro android 10 how to fix
Click to expand...
Click to collapse
This camera is for Mi A3 custom roms.
For addapt at your device, intent change libs in arm and arm64 principally in camera device and libcameraservice.so
Nodierg1 said:
This camera is for Mi A3 custom roms.
For addapt at your device, intent change libs in arm and arm64 principally in camera device and libcameraservice.so
Click to expand...
Click to collapse
Redmi note 8 support?
32 sec patch breaks sounds On Havoc too!
This magisk module doesn't require the use of the 32sec fix. I'm on extended reborn rom, everything working fine.
Hi,
I tried this and it install fine but when I open the app it is recieving no input from the camera and can not access any options.
I'm also unable to run any of the GCAM ports as they just crash when I open them.
I'm running crDroid and the lineage camera works, as does open cam, but neither of them support the higher megapixel modes.
I'm using the Australian Xiaomi Mi A3.
Can someone please help me to get a quality camera app installed?
---------- Post added at 03:03 AM ---------- Previous post was at 02:56 AM ----------
blipk99 said:
Hi,
I tried this and it install fine but when I open the app it is recieving no input from the camera and can not access any options.
I'm also unable to run any of the GCAM ports as they just crash when I open them.
I'm running crDroid and the lineage camera works, as does open cam, but neither of them support the higher megapixel modes.
I'm using the Australian Xiaomi Mi A3.
Can someone please help me to get a quality camera app installed?
Click to expand...
Click to collapse
Nevermind! I had to manually add permissions to the stock camera app.
However, GCAM apps are still crashing, even if I add permissions for them.