Related
my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
mrapeace said:
my phone is totally dead after i trying to root using smart flash tool....im install .kdz file n the process is complete...
after that im not see my phone is working....
try to turn on not working..
SoD: Screen of Death, which means, that your phone is frozen, and you can't do anything at all. Often combined, with a heating up, of the device.
plesss hellpp!! :crying:
(sorry for bad english)
Click to expand...
Click to collapse
Is SW Update still accessible?
Sent from my LG-P970
xonar_ said:
Is SW Update still accessible?
Sent from my LG-P970
Click to expand...
Click to collapse
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
mrapeace said:
no...because my phone is like phone without battery....i try to connect usb cable use the step volume up + power button...nothing appear....
Click to expand...
Click to collapse
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
You're tried?
N00BY0815 said:
Only Volume UP and plug in USB, NO POWER BUTTON!
Try again and report.
Click to expand...
Click to collapse
nothing appear.... if we try to root our phone is that damage our phone hardware??
mrapeace said:
nothing appear.... if we try to root our phone is that damage our phone hardware??
Click to expand...
Click to collapse
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
xonar_ said:
No. Not unless you throw your phone at the wall halfway through the processes.
Sent from my LG-P970
Click to expand...
Click to collapse
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
mrapeace said:
so why my pc not detect usb cable...i charge the phone not show anything....have any solution to fix that???
Click to expand...
Click to collapse
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Same Here
Hello,
I have exactly the same problem as statet above. My phone is totally black.
nothing happens when i put it on charger,
nothing happens when i hold power button,
nothing happens when i hold power buton + down volume,
nothing happens when i remove battery, hold down volume and plug in usb.
My phone worked fine, i have used like 3 or 4 roms. i made a backup of a ROM.
This went totaly succesfull, just as it did before a couple of times.
After this backup it rebooted succesfully to my CM10 nightly.
Then it said my SD card got dismounted and i opend ROM manager and clicked on reboot to recovery.
and then i got in the situation where i am now.
can anyone please help me? im pretty scared that i bricked my phone.
Which is kinda odd because it wasn't aborted during any flash or backup.
Hardware cannot be damaged right ?
N00BY0815 said:
Maybe your USB port is at the cell is broke... Or did you already try, to plug in the cable without battery in the phone? Did you try to directly flash a kdz file with smartflash, or did you unpack it to bin/fls files before?
Click to expand...
Click to collapse
yes...i already did to plug in the cable without battery in the phone...and that why i got the problem when i convert a kdz file to bin and fls files then i flash it...the process is complete...after that i look my phone totally black...no screen respon....
xonar_ said:
The charge images are inside the boot partition if you overwrote that partition it would not show images when charging. What OS is your PC running? If its Linux run lsusb or cat /proc/devices to see if it detects it. Windows doesn't play nice with bairly working devices. I have no idea about how Mac handles it.
Sent from my LG-P970
Click to expand...
Click to collapse
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
mrapeace said:
i running Window OS...i put charger pluq also not show anything...no screen light...no battery images display....nothing at all...
Click to expand...
Click to collapse
I would recommend sending it into repair shop. At this point we can't do anything if SW update mode is nor accessible. I've been working on a way to recover with shot bootloader but to no avail.
Sent from my LG-P970
Hi @ all
I'm working on unlocking my bootloader
and it always get stuck on this "factory reset for first bl unlock" thing
and I think it is because of missing fastboot drivers ( possibly that's why it's working
on linux distros).
When my phone get stuck and I go into device manager in Win 7
there's a fastboot device with a yellow triangle (=missing drivers),
so do anybody know how I can get those drivers?
I already installed latest LG drivers (through LG Update Tool and from a external download)
and I updated adb and that whole thing but still no fastboot drivers
Are there any drivers available for our v20A yet?
Thanks for your help in advance,
you guys are awesome
ImInMunichBitch said:
Hi @ all
I'm working on unlocking my bootloader
and it always get stuck on this "factory reset for first bl unlock" thing
and I think it is because of missing fastboot drivers ( possibly that's why it's working
on linux distros).
When my phone get stuck and I go into device manager in Win 7
there's a fastboot device with a yellow triangle (=missing drivers),
so do anybody know how I can get those drivers?
I already installed latest LG drivers (through LG Update Tool and from a external download)
and I updated adb and that whole thing but still no fastboot drivers
Are there any drivers available for our v20A yet?
Thanks for your help in advance,
you guys are awesome
Click to expand...
Click to collapse
you don't need the fastboot driver simply type adb reboot oem-unlock, the official way...
send from my rooted P880
http://forum.xda-developers.com/showthread.php?t=2180497&page=2
Youl'll find fastboot drivers here, in post number 17 by 'nedooo'. He attached them in his post. They worked for me!
Well I think you didn't get where I got stuck
I do the official way (or any other way) and I get into the
unlock procedure menu, then I press volume up
and it says "Download Mode" (in red) and nothing happens
but the fastboot device is recogniced in windows (without drivers).
If I unplug the usb before or after the download mode thing appears
it shows the next line (factory reset for first bootloader unlock ... please wait).
But then nothing happens
Tried plugging usb back in and power button but nothing happens after that.
So I think it's the fastboot driver
teddyxfire said:
http://forum.xda-developers.com/showthread.php?t=2180497&page=2
Youl'll find fastboot drivers here, in post number 17 by 'nedooo'. He attached them in his post. They worked for me!
Click to expand...
Click to collapse
I'll look into it
If they work I love you, I searched whole day for this!
Thank You!
EDIT: A little text appeared saying "Done ... Now ready!"
You are awesome!
EDIT 2: After good 2 hours of working I got TWRP running and restored an old data backup
without any problems.
Result: Open Bootloader - TWRP - No data loss
ImInMunichBitch said:
I'll look into it
If they work I love you, I searched whole day for this!
Thank You!
EDIT: A little text appeared saying "Done ... Now ready!"
You are awesome!
EDIT 2: After good 2 hours of working I got TWRP running and restored an old data backup
without any problems.
Result: Open Bootloader - TWRP - No data loss
Click to expand...
Click to collapse
I have the packet from 17 post, now, i click at install and nothing happens, could you tell me how proceeds ??
Im allways getting the message above:
(bootloader) Showing Options on Display.
(bootloader) Use device keys for selection.
(bootloader) Bootloader is unlocked now.
FAILED (status read failed (Too many links))
finished. total time: 169.836s
Installed the Euro-XXX and in About Phone read:
P88020A-724-06
Any rom installed returns this code 724-06, till the 20B, i got this code.
Any help ??
Mine was a 262-000, and there were no errors like yours.
Sent from my LG-P880
Install?
teddyxfire said:
http://forum.xda-developers.com/showthread.php?t=2180497&page=2
Youl'll find fastboot drivers here, in post number 17 by 'nedooo'. He attached them in his post. They worked for me!
Click to expand...
Click to collapse
How do you install them? I run the Install.exe but nothing happens. I am running it as administrator too. And the FilterDriverInstaller.exe is in chinese so I don't think it's that one. Sorry if this is a super noobish question.
Edit: Don't. Just don't.... **** I'm retarded
Edit 2: I have the same problem (stuck on factory reset), but I can't seem to find the fastboot driver with the yellow triangle in device manager. Is it something completely else that's causing my problem?
Edit 3: Don't know why, but I now get the message Done... Now ready!
You guys need windows 7 PC to unlock the device. And make sure your PC have android fast boot drivers given by needooo installed in. If drivers in PC are not perfectly configured you can't unlock your device. Why windows 7? Known truth windows 8 sucks. You can't install fast boot drivers in windows 8
Not yet solved you must be missing something do as it is in the post.
Sent from my LG-P880 using xda app-developers app
bollen55 said:
how do you install them? I run the install.exe but nothing happens. I am running it as administrator too. And the filterdriverinstaller.exe is in chinese so i don't think it's that one. Sorry if this is a super noobish question.
Edit: Don't. Just don't.... **** i'm retarded
edit 2: I have the same problem (stuck on factory reset), but i can't seem to find the fastboot driver with the yellow triangle in device manager. Is it something completely else that's causing my problem?
Edit 3: Don't know why, but i now get the message done... Now ready!
Click to expand...
Click to collapse
if you right click on the yellow triangle and press update drivers, you'll be sorted
just make sure you have the drivers downloaded...
Sofikul said:
if you right click on the yellow triangle and press update drivers, you'll be sorted
just make sure you have the drivers downloaded...
Click to expand...
Click to collapse
You did notice that the last post is nearly two months old didn't you? Unnecessary to post an answer for this.
Sent from my LG-P880
Yeah you are stuck like me , if you unplug the charger , it will give u the factory reset line and says please wait ... then it will do nothing. Yesterday I found these on the forum I think I ll try their ways :
Killah.inc said:
I had problem to, to install the drivers to but i find a very easy way.
1, uninstall the LG suport tool and then reinstall it agien.
2, connect phone to computer.
3, open LG suport tool and from it uppdate/install adb drivers. (If u have drivers but maby wrong drivers uppdate, if u dont have drivers you install).
4, now u have the latest and right drivers on your device.
For me that worked very good....good luck
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
The second one is explaining how you should make sure that ur drivers are updated , and providing a link to download adb drivers.
Omario-242 said:
Hi @ all
I'm working on unlocking my bootloader
and it always get stuck on this "factory reset for first bl unlock" thing
and I think it is because of missing fastboot drivers ( possibly that's why it's working
on linux distros).
When my phone get stuck and I go into device manager in Win 7
there's a fastboot device with a yellow triangle (=missing drivers),
so do anybody know how I can get those drivers?
I already installed latest LG drivers (through LG Update Tool and from a external download)
and I updated adb and that whole thing but still no fastboot drivers
Are there any drivers available for our v20A yet?
Thanks for your help in advance,
you guys are awesome
Click to expand...
Click to collapse
teddyxfire said:
http://forum.xda-developers.com/showthread.php?t=2180497&page=2
Youl'll find fastboot drivers here, in post number 17 by 'nedooo'. He attached them in his post. They worked for me!
Click to expand...
Click to collapse
Sent from my Lg p-880 using xda premium
I hope they gave enough help good luck !
john_0405 said:
Yeah you are stuck like me , if you unplug the charger , it will give u the factory reset line and says please wait ... then it will do nothing. Yesterday I found these on the forum I think I ll try their ways :
The second one is explaining how you should make sure that ur drivers are updated , and providing a link to download adb drivers.
Sent from my Lg p-880 using xda premium
I hope they gave enough help good luck !
Click to expand...
Click to collapse
Why you answer this thread? The title says it's solved, and the last necessary post was about 2 month ago.
Please don't think I don't appreciate your help but like I said it's solved
Sent from my LG-P880
Omario-242 said:
Why you answer this thread? The title says it's solved, and the last necessary post was about 2 month ago.
Please don't think I don't appreciate your help but like I said it's solved
Sent from my LG-P880
Click to expand...
Click to collapse
I am terribly sorry , I was quoting from this thread, and instead of pasting in another thread I pasted it here. Again I am sorry , and I am still new so I didnt know how to delete the post using xda on android.
Omario-242 said:
Well I think you didn't get where I got stuck
I do the official way (or any other way) and I get into the
unlock procedure menu, then I press volume up
and it says "Download Mode" (in red) and nothing happens
but the fastboot device is recogniced in windows (without drivers).
If I unplug the usb before or after the download mode thing appears
it shows the next line (factory reset for first bootloader unlock ... please wait).
But then nothing happens
Tried plugging usb back in and power button but nothing happens after that.
So I think it's the fastboot driver
Click to expand...
Click to collapse
it happens same to me
i pressed Volume up and it says "Download Mode"(in red) and nothing happened
so i unplugged and it says "Running factory reset for the first Bootloader unlock.....please wait"
how did you solve this problem?
just wait? or... plug usb again?
aqua06 said:
it happens same to me
i pressed Volume up and it says "Download Mode"(in red) and nothing happened
so i unplugged and it says "Running factory reset for the first Bootloader unlock.....please wait"
how did you solve this problem?
just wait? or... plug usb again?
Click to expand...
Click to collapse
Few posts before yours there's a link to fastboot drivers. Just install those manually. For me those where the only one working so you should give it a try
The problem seem to be that there are different fastboot versions or something similar.
Sent from my LG-P880 using XDA Premium 4 mobile app
Omario-242 said:
Few posts before yours there's a link to fastboot drivers. Just install those manually. For me those where the only one working so you should give it a try
The problem seem to be that there are different fastboot versions or something similar.
Sent from my LG-P880 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thank you~
succeed in installing CM11 on my 4x ~
aqua06 said:
thank you~
succeed in installing CM11 on my 4x ~
Click to expand...
Click to collapse
Glad to help you
Sent from my LG-P880 using XDA Premium 4 mobile app
I was trying to restore back to stock and followed the directions completely. After over and hour plus the onscreen message kept saying it was sending the ROM files to the phone its pretty clear it wasn't. So now I am stuck in the Bootloader with no ROM image at all. My Win8 computer suddenly won't recognize the device, I have removed and re-installed the drivers that worked before and get nothing.
I am on my wife's Win7 computer and I still cannot get the device to be recognized with the current drivers installed. The only thing I can do is power down my HTC One and reboot in the Bootloader - Fastboot.
I could use any help urgently.
RaptorMD said:
I was trying to restore back to stock and followed the directions completely. After over and hour plus the onscreen message kept saying it was sending the ROM files to the phone its pretty clear it wasn't. So now I am stuck in the Bootloader with no ROM image at all. My Win8 computer suddenly won't recognize the device, I have removed and re-installed the drivers that worked before and get nothing.
I am on my wife's Win7 computer and I still cannot get the device to be recognized with the current drivers installed. The only thing I can do is power down my HTC One and reboot in the Bootloader - Fastboot.
I could use any help urgently.
Click to expand...
Click to collapse
Have you tried flashing a recovery in fastboot?
The command is fastboot flash recovery nameofrecovery.img
Flash a custom recovery and then install a custom rom through it.That should make your phone usable for the moment. When you have time again you can try going back to stock.
I have heard these things recommend by others:
- Be sure you have the latest drivers. Download HTC Sync if need be, and sure to reboot your PC, then allow enough time for the phone to be recognized.
- Try a different USB port.
- Power down phone by simulating a battery pull by holding down the power button for up to fifteen seconds, then reboot into recovery by pressing the volume down key as the phone restarts.
Good luck!
Sent from my HTC One using Tapatalk 2
BillTheCat said:
I have heard these things recommend by others:
- Be sure you have the latest drivers. Download HTC Sync if need be, and sure to reboot your PC, then allow enough time for the phone to be recognized.
- Try a different USB port.
- Power down phone by simulating a battery pull by holding down the power button for up to fifteen seconds, then reboot into recovery by pressing the volume down key as the phone restarts.
Good luck!
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I tried the power down as you mentioned it just reboots everytime, I also tried the rebooting into recovery - Fastboot. I also tried all 4 USB Ports on my laptop.
Any other thoughts on this?
I tried the HTC Sync installer still get the same thing USB Device Not Recognized.
My device wasn't able to work with USB 2.0 port, is there only USB 2.0 on your laptop?
Sent from my HTC One™
I have USB 3.0 but no joy on any of my ports. On the phone with HTC Support they are USELESS. The only thing they can offer is to reload the OS by replacing the motherboard and that takes 2 weeks and $200. There has to be a better way.
http://androidforums.com/incredible-tips-tricks/161463-ruu-error-170-171-solution-windows-7-a.html
Don't know if this is any help to you
a box of kittens said:
http://androidforums.com/incredible-tips-tricks/161463-ruu-error-170-171-solution-windows-7-a.html
Don't know if this is any help to you
Click to expand...
Click to collapse
I am off to bed its nearly 1:30am and I need to go to work in 5 hours so I need some sleep. Any other suggestions, voodoo help or chants are welcome
hassan89 said:
Have you tried flashing a recovery in fastboot?
The command is fastboot flash recovery nameofrecovery.img
Flash a custom recovery and then install a custom rom through it.That should make your phone usable for the moment. When you have time again you can try going back to stock.
Click to expand...
Click to collapse
At the moment I cannot get my phone to show up on my computer, without that I cannot even push a recovery image like TWRP. If only I could.
Original poster: born_fisherman
My laptop only has USB 3.0 ports. I could get HTC sync to
work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windo...st-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Rocker19943 said:
Original poster: born_fisherman
My laptop only has USB 3.0 ports. I could get HTC sync to
work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windo...st-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Click to expand...
Click to collapse
Thank you. The link isn't working, could you send it to me via PM.
Thanks.
Rocker19943 said:
Original poster: born_fisherman
My laptop only has USB 3.0 ports. I could get HTC sync to
work fine, but the PC wouldn't recognize the phone when in the bootloader. I was struggling to find an answer until I came across this blog and this worked flawlessly. The problem is with the Microsoft USB 3 host controller. This method replaces 2 Microsoft drivers with Intel drivers.
http://plugable.com/2012/12/01/windo...st-controllers
Follow this to a T. It does require rebooting the PC to disable driver signing, so make sure you bookmark the link to go back to it after you rebooted. If this helps you, just press the thanks button!
Click to expand...
Click to collapse
Was this the link you were suggesting? http://plugable.com/2012/12/01/windows-8-and-intel-usb-3-0-host-controllers I found it doing some google searches.
Yes, it is
Sent from my HTC One™
If you can get into bootloader all is not lost. We'll figure something out. Have you tried a different cable?
makbil said:
If you can get into bootloader all is not lost. We'll figure something out. Have you tried a different cable?
Click to expand...
Click to collapse
I truly want to say THANK YOU, to everyone here at XDA-Developers. It is truly one of best communities for help, advice and resources and no one is ever left behind.
I was able to use my Win7 desktop at work, (very open workplace) and use the drivers that come with the All In One Root Kit and was able to get Fastboot USB and get my ROM back on my phone. I am now completely back to stock, wow that was scary stuff.
Above all else I learned a HUGE lesson, ask questions, wait for responses and ask more questions if you don't understand because someone will help you. Just as I was helped and saved last night and today by everyone here I too will pay it forward in anyway I can.
Thank you all for your help. HTC is NOT getting my $200 for a new motherboard. I mean their Tech Support at 12:20am is not that great but at least someone was there.
Thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you
Rocker19943 said:
Yes, it is
Sent from my HTC One™
Click to expand...
Click to collapse
Thanks again. I got the drivers d/l this morning along with the two small files I needed to copy and replace into the drivers folder (took me a few minutes to figure out where they wanted me to paste them). So tonight I will get home and I will move forward with removing the MS drivers grrrr.
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Xperia v brick
gregbradley said:
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Click to expand...
Click to collapse
no the phone doesnt connect in fastboot mode it shows no led nothing i only see in device manager that there is a
QHSUSB_DLOAD device wich i think is the processor...so what can i do man?and in device manager i see connected qualcomm hs-usb qdloader 9008 (com8)
did you try what I said?
hello greg, hows the z1, hope you enjoy it
thanks for your many many support to all questions here, hope it wasnt that frustrated when people not tried out what you suggested :silly:
to sash89: you unlocked bootloader, and flashed an cm img kernel? that let me comes to another question. you flashed that kernel above a stock rom, or you flashed CM ROM also?
Hi
The Z1 is great, I recommend it.
Yes, it does help if people try things you suggest.
brick
gregbradley said:
did you try what I said?
Click to expand...
Click to collapse
but where i must enter that code?in cmd?or where?
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
brick
gregbradley said:
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
nothing hapened man...it may be a hard brick???if yes what can i do?
sash89 said:
nothing hapened man...it may be a hard brick???if yes what can i do?
Click to expand...
Click to collapse
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
brick
gregbradley said:
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
Click to expand...
Click to collapse
nothing happens man...no leds showing up no connection to pc...only this is showing up on device manager when i connect phone to pc qualcomm hs-usb qdloader 9008 com8
This is not looking good for you.
Try this link
or this google search
but I have not heard of good things with phones that want that driver. Best of luck and hopefully someone can come up with a solution
sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
YudiA1 said:
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
brick
gregbradley said:
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
Click to expand...
Click to collapse
so may i send it to warranty?what are your suggestions guys?
sash89 said:
so may i send it to warranty?what are your suggestions guys?
Click to expand...
Click to collapse
Your warrenty is void because you unlocked the bootloader.
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
brick
immerblind said:
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
Click to expand...
Click to collapse
and what is this meaning man?my battery was something like 18 percent when i flashed...so may the battery be broken?anyway when i put the phone into charge without battery red led flashes for one time...what this means?
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?
immerblind said:
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?[/QUOTEi was on stock rom man
Click to expand...
Click to collapse
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
Click to expand...
Click to collapse
If it is hard bricked then open the phone disconnect the battery and reconnect it..then use flashtool to flash a kernel with recovery and flash another rom..you should then be good to go!
@PeterGeorgiou already tried it, gives nothing.
fastlone said:
@PeterGeorgiou already tried it, gives nothing.
Click to expand...
Click to collapse
Try to press and hold volume up and power simultaneously and connect to pc. I managed to recover my XV that way.
If it doesnt work, take battery out and in and retry.
Good luck!!
Still nothing :/
Second question: is there any chance that if I send it for a guarantee, sony experts won't find that my phone was modificated?
fastlone said:
Still nothing :/
Second question: is there any chance that if I send it for a guarantee, sony experts won't find that my phone was modificated?
Click to expand...
Click to collapse
All you have to do is put the phone in fastboot mode and use Flashtool to flash a stock kernel or the kernel for your ROM if you're on a Custom ROM, which is the first thing a repair shop will do if you tell them what you did and/or if they really are "experts". You should google how to put your phone in fastboot mode since I've already heard about several people saying they've ruined their phone when in fact they just have no idea how to put it into fastboot/flash mode properly.
If they manage to boot up the phone they will see that you've at the very least rooted your phone and installed apps that require root, so you might want to consider that.
Antiga Prime said:
All you have to do is put the phone in fastboot mode and use Flashtool to flash a stock kernel or the kernel for your ROM if you're on a Custom ROM, which is the first thing a repair shop will do if you tell them what you did and/or if they really are "experts". You should google how to put your phone in fastboot mode since I've already heard about several people saying they've ruined their phone when in fact they just have no idea how to put it into fastboot/flash mode properly.
If they manage to boot up the phone they will see that you've at the very least rooted your phone and installed apps that require root, so you might want to consider that.
Click to expand...
Click to collapse
If I was able to put my phone in fastboot mode, I wouldn't make this thread. Main reason of creating this topic is that I can't access my phone in any way including many combinations of keys, disconnecting battery etc.
fastlone said:
If I was able to put my phone in fastboot mode, I wouldn't make this thread. Main reason of creating this topic is that I can't access my phone in any way including many combinations of keys, disconnecting battery etc.
Click to expand...
Click to collapse
I know, I'm just saying because, just as you, I've seen other people make threads because they say they can't do this and that, and then it turns out they just don't know what they are doing. You wouldn't be the first person who couldn't get into fastboot mode, when in fact, didn't know how to get into fastboot mode, which is why I reminded you, because if a Sony Service Center does in fact boot up your phone and see you have rooted, that might most likely void your warranty and you'd have to pay; so it's best if you really figure out if you actually know how to get into fastboot/flash mode.
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
Click to expand...
Click to collapse
What boot.img have you installed?
Is your bootloader unlocked?
istux said:
What boot.img have you installed?
Is your bootloader unlocked?
Click to expand...
Click to collapse
Of course it's unlocked :>
It's a boot.img from Omni ROM dated on 09.23.2014. Rom I've installed is WhiteNeo's NeoWave based on CM11.
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
Click to expand...
Click to collapse
fastlone said:
Of course it's unlocked :>
It's a boot.img from Omni ROM dated on 09.23.2014. Rom I've installed is WhiteNeo's NeoWave based on CM11.
Click to expand...
Click to collapse
NeoWave is based on Omnirom... not CM11.
Boot.img had to be installed by Flashtool or manually in bootloader mode.
The only way is to connect to PC pressing volume UP.
Power+volumeUP is a good way to reset a wrong kernel.
No sign from your phone? No blue light?
Have you tried to change usb cable? To change PC?
If there's no red light when you connect the recharger, it's a bad sign though
istux said:
NeoWave is based on Omnirom... not CM11.
Boot.img had to be installed by Flashtool or manually in bootloader mode.
The only way is to connect to PC pressing volume UP.
Power+volumeUP is a good way to reset a wrong kernel.
No sign from your phone? No blue light?
Have you tried to change usb cable? To change PC?
If there's no red light when you connect the recharger, it's a bad sign though
Click to expand...
Click to collapse
Sorry, my bad.
Haven't switched USB cable (I've got only one), but I'm sure it works because I've checked it on my secondary phone.
Tried to do it on PC and also on my laptop, both don't work.
And a really bad thing is that when I connect my phone to recharger there's no red light.
fastlone said:
Sorry, my bad.
Haven't switched USB cable (I've got only one), but I'm sure it works because I've checked it on my secondary phone.
Tried to do it on PC and also on my laptop, both don't work.
And a really bad thing is that when I connect my phone to recharger there's no red light.
Click to expand...
Click to collapse
Perhaps you need to find a way to recharge your battery because it's to low for anything to happen?
Someone should inform the Flashify developer that his app bricks our phones.. Perhaps he can add some kind of device check to prevent this in future.
WhiteNeo said:
Perhaps you need to find a way to recharge your battery because it's to low for anything to happen?
Someone should inform the Flashify developer that his app bricks our phones.. Perhaps he can add some kind of device check to prevent this in future.
Click to expand...
Click to collapse
Any ideas how to recharge my battery?
fastlone said:
Any ideas how to recharge my battery?
Click to expand...
Click to collapse
There are some chargers like that on the market.
The question is if you want to invest the money and give it a try.
WhiteNeo said:
There are some chargers like that on the market.
The question is if you want to invest the money and give it a try.
Click to expand...
Click to collapse
Or just buy a new battery, which has always a little charge before installation.
A wrong kernel doesn't allow to recharge and the battery may discharge quickly, that's true, but the fact that after rebooting there was no sign is a very bad thing.
Maybe the battery was suddenly fried... who knows.. Yeah, give it a try.