I really need your help. My xiaomi mi a2 just got brick i think?.
I can't fix the " Failed to mount '/persist' (Invalid argument)
I can't even fix my persist:crying::crying:
I'm using twrp 3.3.1-0
Thamk you for the help
Update: fix by this https://forum.xda-developers.com/mi-a2/how-to/how-to-fix-sensors-camera-stock-pie-10-t3914885
Flash through mi flash a good firmware no?
blazessdd said:
Flash through mi flash a good firmware no?
Click to expand...
Click to collapse
No. Btw my persist has [0mb]
Related
Hello ! I need help. When i wanted flash a rom i got a message in twrp: Failed to mount '/applog' (Invalid argument) .When i flash some rom i reboot phone and he stop on boot animation. So i dont know what i should do now. If sb will know how to repair this i will happy. Sry for my english.
Misio0887 said:
Hello ! I need help. When i wanted flash a rom i got a message in twrp: Failed to mount '/applog' (Invalid argument) .When i flash some rom i reboot phone and he stop on boot animation. So i dont know what i should do now. If sb will know how to repair this i will happy. Sry for my english.
Click to expand...
Click to collapse
Restore stock firmware through flashtool. There are many guides on XDA and it is very easy to find
Hello!
I tried to downgrade from nougat to mm and my /cust partition got corrupted.
Successfully installed EVA-L19C432B386 with the dload method, but I stuck at the huawei logo.
I have access to TWRP and fastboot, but in TWRP I got "Failed to mount '/cust' (Invalid argument)" error.
Could anyone help me to find out why these happen?
Thank you in advance!
EVA-L19
twrp-3.1.1-1-eva.img
EDIT: I found my stock cust.img and flashed it via fastboot. Finally it's working properly.
Can you install anything from TWRP
Rafa Mistry said:
Can you install anything from TWRP
Click to expand...
Click to collapse
I can, but every rom I install from TWRP ending with a "Failed to mount '/cust' (Invalid argument)" error message and won't boot.
Maybe if I can find my stock cust.img, I can restore it with this method.
But I cannot fint it anywhere.
At me similar was.
Hardly corrected the situation. I put twrp-3.0.2-0-eva-modaco-test1 in place of eRecovery using adb flasher, it saw the phone's memory. Then I formatted the "system" section in the ext2. Next, I rebooted into the stock recovery. It erased the cache (up to 100%) and data (an error of 19%), but the smartphone still loaded on the firmware Android 7.0 NRD90M test keys. Next, I requested a rollback, and then through the folder the dload in the built-in memory requested the firmware in b170.
Download http://download-c1.huawei.com/download/downloadCenter?downloadId=91764&siteCode=uk
Install use method buttons .
in your condition at this moment might get bricked after some wrong flash
so my suggestions is enter fastboot flash stock nougat recovery if your still there ( emui 5 )
or flash stock marsmallow recovery ( emui 4.1 ) then download the rollback and apply fix
after that flash your marsmallow desired firmware
Hi, I have the same problem, but I can't fix it.
I tried the @Limerain link solution, but it doesn't recognize the commands for adb.
Help me, please!
Oh, thank you.
rey_lagarto said:
Hi, I have the same problem, but I can't fix it.
I tried the @Limerain link solution, but it doesn't recognize the commands for adb.
Help me, please!
Oh, thank you.
Click to expand...
Click to collapse
Use fastboot command instead of adb.
Limerain said:
Use fastboot command instead of adb.
Click to expand...
Click to collapse
It didn't work either.
I've also tried Adb Pull, and it seems to do something, but no, it doesn't do anything.
Limerain said:
Hello!
I tried to downgrade from nougat to mm and my /cust partition got corrupted.
Successfully installed EVA-L19C432B386 with the dload method, but I stuck at the huawei logo.
I have access to TWRP and fastboot, but in TWRP I got "Failed to mount '/cust' (Invalid argument)" error.
Could anyone help me to find out why these happen?
Thank you in advance!
EVA-L19
twrp-3.1.1-1-eva.img
EDIT: I found my stock cust.img and flashed it via fastboot. Finally it's working properly.
Click to expand...
Click to collapse
Is the img your backup img? mind if I use it just to recover my system? I have the following issue https://imgur.com/a/nx6U5bC
Limerain said:
Hello!
I tried to downgrade from nougat to mm and my /cust partition got corrupted.
Successfully installed EVA-L19C432B386 with the dload method, but I stuck at the huawei logo.
I have access to TWRP and fastboot, but in TWRP I got "Failed to mount '/cust' (Invalid argument)" error.
Could anyone help me to find out why these happen?
Thank you in advance!
EVA-L19
twrp-3.1.1-1-eva.img
EDIT: I found my stock cust.img and flashed it via fastboot. Finally it's working properly.
Click to expand...
Click to collapse
Can Someone help me, somehow at fastboot I get error, command not allowed only at cust.img
when I try flashing a custom rom it gives me an error saying "failed to mount '/system' (invalid argument). please help me as I have no OS installed on my device my device is the Huawei P9 (eva-l09). tbh im about to cry .
Drysauce said:
when I try flashing a custom rom it gives me an error saying "failed to mount '/system' (invalid argument). please help me as I have no OS installed on my device my device is the Huawei P9 (eva-l09). tbh im about to cry .
Click to expand...
Click to collapse
I guess you still can go to twrp right? Download official rom, put into dload folder. Flash with 3 button method. Hope it's work. If you don't understand about custom rom, why try to install it? Official rom is already good enough
Hey, I'm currently trying to install a new ROM, probably LineageOS, on my Nem L51, but since a few days I have an error when I'm trying to wipe :
"Failed to mount '/vendor' (Invalid argument)", and same error for /product...
So I can't do anything
I'm using EliteTWRP and my Bootloader is unlocked.
Could you please help me ? :3
Thanks in advance
Have seen similar issues after you flashed elite ROM.
Try flashing open kirin and see the behaviour.
shashank1320 said:
Have seen similar issues after you flashed elite ROM.
Try flashing open kirin and see the behaviour.
Click to expand...
Click to collapse
Hi !
Firstly, thanks for your reply.
I tried to flash some OpenKirin, like this : https://forum.xda-developers.com/hu...elite-rom-v1-0-nougat-builds-cxxb3xx-t3625599 but I got the same error, so it don't works.
Thanks in advance
Deathworld said:
Hi !
Firstly, thanks for your reply.
I tried to flash some OpenKirin, like this : https://forum.xda-developers.com/hu...elite-rom-v1-0-nougat-builds-cxxb3xx-t3625599 but I got the same error, so it don't works.
Thanks in advance
Click to expand...
Click to collapse
Try booting to recovery from recovery and click on menu option and see if this is still an issue
shashank1320 said:
Try booting to recovery from recovery and click on menu option and see if this is still an issue
Click to expand...
Click to collapse
How did you solve this problem?
parxal said:
How did you solve this problem?
Click to expand...
Click to collapse
I never had one. Which problem you are talking about mate?
Hello,
my redmi 4x Sensors aren't working. So I want to restore a persist twrp backup of a working device. Can somebody share this with me. Thanks
Smoo
Is your persist partition mountable ??
First try to mount persist partition if it will mount then try to flash persist.img via fastboot
Or if failed to mount then flash Fastboot rom...
parthavluv said:
Is your persist partition mountable ??
First try to mount persist partition if it will mount then try to flash persist.img via fastboot
Or if failed to mount then flash Fastboot rom...
Click to expand...
Click to collapse
I cant flash it via fastboot. I get a missing rights error.
But i can restore it with twrp.
I have Nitrogen OS installed and dont want to reinstall the Rom and all the apps
smoo62 said:
I cant flash it via fastboot. I get a missing rights error.
But i can restore it with twrp.
I have Nitrogen OS installed and dont want to reinstall the Rom and all the apps
Click to expand...
Click to collapse
Have you got it your backup ???
From my Redmi 4X using Tapatalk VIP
parthavluv said:
Have you got it your backup ???
From my Redmi 4X using Tapatalk VIP
Click to expand...
Click to collapse
Thanks for your reply. No, I only have one oft my current persist partition with broken Sensors
smoo62 said:
Thanks for your reply. No, I only have one oft my current persist partition with broken Sensors
Click to expand...
Click to collapse
I will send you soluton
parthavluv said:
I will send you soluton
Click to expand...
Click to collapse
Thank you. Did you remove the file?
smoo62 said:
Thank you. Did you remove the file?
Click to expand...
Click to collapse
Yeah i did... I will send you again....
Well have you downloaded the file .???
parthavluv said:
Yeah i did... I will send you again....
Well have you downloaded the file .???
Click to expand...
Click to collapse
No. To short just saw the notifaction.
smoo62 said:
No. To short just saw the notifaction.
Click to expand...
Click to collapse
Ok i will send you again....
From my Redmi 4X using Tapatalk VIP
parthavluv said:
Ok i will send you again....
From my Redmi 4X using Tapatalk VIP
Click to expand...
Click to collapse
Okay, thank you
edit:
I fixed it by backing up everything and then installing miu dev and recovered the backup without the persist partition.
smoo62 said:
Okay, thank you
edit:
I fixed it by backing up everything and then installing miu dev and recovered the backup without the persist partition.
Click to expand...
Click to collapse
Great....
From my Redmi 4X using Tapatalk VIP
Can you please send me the solution too , i have the same model xiaomi redmi 4x . thanks
parthavluv said:
I will send you soluton
Click to expand...
Click to collapse
Hello
Can you send me the solution thanks