I'm using ANX camera 139 on 9T pro. But it works like:
48MP, 1x and 2x all use the center camera, and 48MP mode just generates a 1440x1920 2MP image.
0.6x uses the bottom camera.
How to use top one and what it is?
EDIT: It is caused by installing all ANX Camera + CustLib + 48MPFix. After removing CustLib then it works fine.
Related
Hello brothers,
In Mi A2 Pie i installed a google camera (Camera Api2 Done) but in this camera Rear Portrait not working but Front Portrait working which is simply best. But Rear Portrait not working it takes a normal picture without any blur.
-> Gcam5.1 Arnova V8.3.1b (using)
So how to fix this problem??
For some stupid reason zoom is disabled in 48 mp mode, can someone create a mod to make it work, it works with gcam
Open cam
Chose 2x
Put ur finger on 8mp tele lens ( most upper one)
In 2 sec phone will change to 48mp main lens
And jn low light it always chooses 48mp main lens
redsun_ravi said:
Open cam
Chose 2x
Put ur finger on 8mp tele lens ( most upper one)
In 2 sec phone will change to 48mp main lens
And jn low light it always chooses 48mp main lens
Click to expand...
Click to collapse
I said I already have 48 mp working in gcam, I want it for stock miui camera, like a magisk module that could enable the zoom
Hello all,
As I said in the title.
Out of boring I tried to see , physically which of the camera is for tele, wide and main.
While putting my finger on the camera, I discovered that the first camera in the row is not used at all in the software ...
Can you, please, check too ?
It's used for 2x... I just tested it.
Well, when you zoom into 2x in stock camera app, it automatically changes to tele camera. But if you cover the tele camera, it reverts to 48mp main camera.
But in some lighting conditions, it uses 48mp main camera even you zoom it 2x
ArmedandDangerous said:
It's used for 2x... I just tested it.
Click to expand...
Click to collapse
I've noticed that too, it's used when in portrait mode thought. You can even trigger a weird behavior by changing to portrait mode and back to photo mode, then change to 2x zoom and telephoto lens will be used (like you would normally expect), then changing zoom levels randomly you can get to change 2x zoom to main sensor again.
It's uses digital 2x zoom when light is low and uses telephoto camera when there is enough light present
Is there any way to enable zoom in 48mp mode in stock camera. Its a waste not to have zoom at that resolution
No, & will never have.
You're getting the final image as 48MP so can zoom inside that all you want & good for editing later on.
Doesn't zooming in on regular camera mode switch from camera lens to other camera lens?
So, it basically switches to 48Mp lens when you zoom 2x?
Edit: it does. Lower lens is for 0.6x, and middle lens is for 1x and 2x. Same lens is for 48mp. Upper lens is probably focus lens. Try choosing mode and covering lens with your finger, and you'll see which is which.
Sent from my Mi 9T Pro using Tapatalk
babaroga73 said:
Upper lens is probably focus lens.
Click to expand...
Click to collapse
Upper lens is 2x Zoom. But only used in good lighting conditions. Otherwise the 48MP Camera is used
Can you explain better?
When i try to zoom in the 2x camera, still the 8 mp camera, dosen't change to the 48 mp camera, i can only use the 48 mp camera on portrait mode ou in pro mode, and on the pro mode the 48 mp camera is named "telephoto". I don't know... There's any chance to this happen beacuse of any software problem?
Hello,
My Redmi Note 9 is working perfectly with Pixel Experience ROM. And for the camera I have GCam and ANX Camera, but with GCam I cannot take advantage of all the sensors and do not have 48 MP. With ANX Camera I have detected some problems.
1. It freezes when I try to use the Macro lens options or the UW lens.
2. Filters do absolutely nothing. When I take a photo with a filter, the application closes.
3. Night mode closes when taking the picture.
Does anyone know how I can correct these problems? I am using ANXCameraUnity.190R.BontifulDistantHapuka
Thank you,
Rene